Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
Add more filters










Database
Language
Publication year range
1.
Mol Psychiatry ; 2024 May 04.
Article in English | MEDLINE | ID: mdl-38704506

ABSTRACT

Autism spectrum disorder (ASD) encompasses a range of neurodevelopmental conditions. Different mutations on a single ASD gene contribute to heterogeneity of disease phenotypes, possibly due to functional diversity of generated isoforms. SHANK2, a causative gene in ASD, demonstrates this phenomenon, but there is a scarcity of tools for studying endogenous SHANK2 proteins in an isoform-specific manner. Here, we report a point mutation on SHANK2, which is found in a patient with autism, located on exon of the SHANK2B transcript variant (NM_133266.5), hereby SHANK2BY29X. This mutation results in an early stop codon and an aberrant splicing event that impacts SHANK2 transcript variants distinctly. Induced pluripotent stem cells (iPSCs) carrying this mutation, from the patient or isogenic editing, fail to differentiate into functional dopamine (DA) neurons, which can be rescued by genetic correction. Available SMART-Seq single-cell data from human midbrain reveals the abundance of SHANK2B transcript in the ALDH1A1 negative DA neurons. We then show that SHANK2BY29X mutation primarily affects SHANK2B expression and ALDH1A1 negative DA neurons in vitro during early neuronal developmental stage. Mice knocked in with the identical mutation exhibit autistic-like behavior, decreased occupancy of ALDH1A1 negative DA neurons and decreased dopamine release in ventral tegmental area (VTA). Our study provides novel insights on a SHANK2 mutation derived from autism patient and highlights SHANK2B significance in ALDH1A1 negative DA neuron.

2.
Drug Dev Ind Pharm ; 42(2): 307-16, 2016.
Article in English | MEDLINE | ID: mdl-26035332

ABSTRACT

Phytantriol has received increasing amount of attention in drug delivery system, however, the ability of the phytantriol based liquid crystal as a novel embolic agent to provide a sustained release delivery system is yet to be comprehensively demonstrated. The purpose of this study was to prepare a phytantriol-based cubic phase precursor solution loaded with anticancer drug hydroxycamptothecine (HCPT) and evaluate its embolization properties, in vitro drug release and cytotoxicity. Phase behavior of the phytantriol-solvent-water system was investigated by visual inspection and polarized light microscopy, and no phase transition was observed in the presence of HCPT within the studied dose range. Water uptake by the phytantriol matrices was determined gravimetrically, suggesting that the swelling complied with the second order kinetics. In vitro evaluation of embolic efficacy indicated that the isotropic solution displayed a satisfactory embolization effect. In vitro drug release results showed a sustained-release up to 30 days and the release behavior was affected by the initial composition and drug loading. Moreover, the in vitro cytotoxicity and anticancer activity were evaluated by MTT assay. No appreciable mortality was observed for NIH 3T3 cells after 48 h exposure to blank formulations, and the anticancer activity of HCPT-loaded formulations to HepG2 and SMMC7721 cells was strongly dependent on the drug loading and treatment time. Taken together, these results indicate that phytantriol-based cubic phase embolic gelling solution is a promising potential carrier for HCPT delivery to achieve a sustained drug release by vascular embolization, and this technology may be potential for clinical applications.


Subject(s)
Camptothecin/analogs & derivatives , Drug Delivery Systems , Embolization, Therapeutic/methods , Fatty Alcohols/chemistry , Animals , Antineoplastic Agents, Phytogenic/administration & dosage , Antineoplastic Agents, Phytogenic/pharmacology , Camptothecin/administration & dosage , Camptothecin/pharmacology , Chemistry, Pharmaceutical/methods , Delayed-Action Preparations , Drug Liberation , Hep G2 Cells , Humans , Liquid Crystals/chemistry , Mice , NIH 3T3 Cells , Solvents/chemistry , Time Factors
3.
Int J Pharm ; 466(1-2): 390-9, 2014 May 15.
Article in English | MEDLINE | ID: mdl-24657140

ABSTRACT

To develop reverse microemulsion as a potential strategy for pulmonary delivery of salmon calcitonin (sCT) in HFA134a propellant of pressurized metered dose inhalers (pMDIs), pluronic P85 (P85) was chosen as the most appropriate surfactant to form microemulsions containing sCT. Formulation parameters, including the surfactant and ethanol content, water content, and sCT loading, were optimized to obtain two desired pMDI formulations A and B with clear and transparent appearance, Tyndall effect, good physical stability and aerosolization properties. Aerosolization properties of the optimized pMDIs were assessed by next generation impactor (NGI) and twin-stage impactor (TSI), and the dose of sCT in each stage was assayed by HPLC. The fine particle fraction (FPF) of formulations A and B were both at the range of approximately 28.0-36.0%. Cytotoxicity studies indicated the cell viability determined by MTT assay only slightly dropped when the A549 cells were exposed to the pMDI formulations. Pharmacological study performed on the male Wistar rats showed the intratracheal administration of the microemulsion pMDIs containing sCT exhibited similar but prolonged hypocalcemic activity compared with the intravenous injection of sCT solution. Therefore, such reverse microemulsions are potential for pulmonary delivery of therapeutic peptides using HFA-pMDIs.


Subject(s)
Aerosol Propellants/administration & dosage , Aerosol Propellants/chemistry , Calcitonin/chemistry , Hydrocarbons, Fluorinated/administration & dosage , Hydrocarbons, Fluorinated/chemistry , Aerosols , Animals , Calcitonin/administration & dosage , Calcium/blood , Cell Line, Tumor , Cell Survival/drug effects , Chemistry, Pharmaceutical , Emulsions , Ethanol/chemistry , Humans , Male , Poloxamer/chemistry , Rats, Wistar , Surface-Active Agents/chemistry
4.
AAPS PharmSciTech ; 13(4): 1483-91, 2012 Dec.
Article in English | MEDLINE | ID: mdl-23090113

ABSTRACT

The oral administration of amphotericin B (AmB) has the major drawback of poor bioavailability. The aim of this work was to evaluate the potential of AmB-loaded cubosomes as an oral formulation with improved bioavailability. This manuscript firstly developed AmB-loaded cubosomes by using the SolEmuls technology. The encapsulation efficiency, the in vitro release, and stability studies in simulated gastrointestinal fluid were used to evaluate AmB-loaded cubosomes. The acute nephrotoxicity, bioavailability, and tissue distribution study of AmB-loaded cubosomes were assayed upon oral administration to rats. SAXS and cryo-TEM exhibited AmB-loaded cubosomes as a bicontinuous cubic liquid crystalline phase with Pn3m geometry. The encapsulation efficiency and the results of in vitro release and stability studies in simulated gastrointestinal fluid further demonstrated that AmB was successfully encapsulated in cubosomes. AmB-loaded cubosomal formulation orally administrated in rats did not show nephrotoxicity and its relative bioavailability was approximately 285% as compared to Fungizone®. The AmB-loaded cubosomal formulation presented an effective potential approach for enhancing the oral bioavailability of AmB.


Subject(s)
Amphotericin B/chemistry , Nanoparticles/chemistry , Administration, Oral , Amphotericin B/administration & dosage , Amphotericin B/pharmacokinetics , Animals , Anti-Bacterial Agents/administration & dosage , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacokinetics , Biological Availability , Chemistry, Pharmaceutical/methods , Drug Stability , Liquid Crystals/chemistry , Male , Nanoparticles/administration & dosage , Particle Size , Rats , Rats, Sprague-Dawley , Technology, Pharmaceutical/methods , Tissue Distribution , X-Ray Diffraction/methods
5.
Int J Pharm ; 427(2): 385-92, 2012 May 10.
Article in English | MEDLINE | ID: mdl-22343132

ABSTRACT

The objective of this study was to investigate the stability and aerosolization of pressurized metered dose inhalers (pMDIs) containing thymopentin nanoparticles. Thymopentin nanoparticles, fabricated by a bottom-up process, were suspended in hydrofluoroalkane (HFA) 134a together with cineole and/or n-heptane to produce pMDI formulations. The stability study of the pMDIs obtained was carried out at ambient temperature for 6 months. The amount of thymopentin and the aerosolization properties of pMDIs were determined using high-performance liquid chromatography (HPLC) and a twin-stage impinger (TSI), respectively. Based on the results, thymopentin nanoparticles were readily suspended in HFA 134a with the aid of cineole and/or n-heptane to form physically stable pMDI formulations, and more than 98% of the labeled amount of thymopentin and over 50% of the fine particle fraction (FPF) of the pMDIs were achieved. During storage, it was found that for all pMDIs more than 97% of the labeled amount of thymopentin and FPF greater than 47% were achieved. Moreover, the size of thymopentin nanoparticles in propellant containing cineole and n-heptane showed little change. It is, therefore, concluded that the pMDIs comprising thymopentin nanoparticles developed in this study were stable and suitable for inhalation therapy for systemic action.


Subject(s)
Adjuvants, Immunologic/administration & dosage , Metered Dose Inhalers , Nanoparticles , Thymopentin/administration & dosage , Aerosols , Chemistry, Pharmaceutical , Chlorofluorocarbons, Methane , Chromatography, High Pressure Liquid , Cyclohexanols/chemistry , Drug Stability , Drug Storage , Eucalyptol , Heptanes/chemistry , Hydrocarbons, Fluorinated , Lecithins , Microscopy, Electron, Transmission , Monoterpenes/chemistry , Particle Size
SELECTION OF CITATIONS
SEARCH DETAIL