ABSTRACT
Multi-functional actuation systems involve the mechanical integration of multiple actuation and sensor devices with external energy sources. The intricate combination makes it difficult to meet the requirements of lightweight. Hence, polypyrrole@graphene-bacterial cellulose (PPy@G-BC) films are proposed to construct multi-responsive and bilayer actuators integrated with multi-mode self-powered sensing function. The PPy@G-BC film not only exhibits good photo-thermoelectric (PTE) properties but also possesses good hydrophilicity and high Young's modulus. Thus, the PPy@G-BC films are used as active layers in multi-responsive bilayer actuators integrated with self-powered sensing functions. Here, two types of multi-functional actuators integrated with self-powered sensing functions is designed. One is a light-driven actuator that realizes the self-powered temperature sensing function through the PTE effect. Assisted by a machine learning algorithm, the self-powered bionic hand can realize intelligent gesture recognition with an accuracy rate of 96.8%. The other is humidity-driven actuators integrated a zinc-air battery, which can realize self-powered humidity sensing. Based on the above advantages, these two multi-functional actuators are ingeniously integrated into a single device, which can simultaneously perform self-powered temperature/humidity sensing while grasping objects. The highly integrated design enables the efficient utilization of environmental energy sources and complementary synergistic monitoring of multiple physical properties without increasing system complexity.
ABSTRACT
Two-dimensional transition metal carbide nitrides (MXenes) have been extensively explored in diverse areas, such as electrochemical energy storage and flexible electronics. Although the solution-processed MXene-based device has made significant achievements, it is still a challenge to develop large-scale and high-resolution printing methods for flexible printed electronics. In this work, we reported a novel strategy of a porous interlocking structure to obtain flexible MXene/laser-induced graphene (LMX) composite electrodes with enhanced adhesion and high printing resolution. In comparison to traditional printed MXene electrodes, the LMX electrode with an interlocking interface possesses enhanced mechanical properties (adhesive strength of 2.17 MPa) and comparable electrical properties (0.68 S/mm). Furthermore, owing to the outstanding stability and flexibility, the LMX-based triboelectric nanogenerator (TENG) can be used as a self-powered sensor to monitor finger-bending movement. A support vector machine (SVM)-assisted self-powered motion sensor can distinguish the bending angle with high recognition accuracy and can effectively identify different angles. The successful experience of directly printing flexible electrodes with excellent mechanical and electrical properties can be promoted to other solution-processed two-dimensional materials. Our strategy opens up a promising perspective to develop flexible and printed electronics.
ABSTRACT
A smart sensing platform based on a triboelectric nanogenerator (TENG) possesses various advantages such as self-powering, convenience, real-time and biocompatibility. However, the detection limit of the TENG-based sensor is required to be improved. In this study, a high performance TENG-based glucose sensor was proposed by using the Ti3C2Tx (MXene)/graphene oxide (GO) composite electrode. The MXene and GO nanosheets are popular 2D materials which possessed high conductivity and a rich surface functional group. The MXene/GO thin films were prepared through electrostatic self-assembly technology, which can effectively impede the agglomeration of two nanoflakes. The as-prepared MXene/GO film presented outstanding mechanical property. To figure out the relationship between the nanostructure of MXene/GO film and the TENG, a series of MXene/GO-based TENG with different GO sizes was characterized. As a result, the TENG with 400 nm GO demonstrated the highest output performance. Subsequently, the optimized TENG was used in glucose detection application without the assistance of a glucose enzyme. This simple and flexible TENG shows promising potential in biosensors and non-invasive health monitoring.