ABSTRACT
To further explore cocombustion technology with biogas and coal, a series of numerical simulations have been carried out to analyze the effects of the cocombustion ratio ξ, height of biogas nozzle HGN, and tilt angle of burner θBN on combustion characteristics in a 300 MW four-corner tangential boiler furnace. Three types of biogas are gasified from straw, sawdust, and raw wood when air serves as the gasification agent. The velocity field, temperature field, and NO emissions have been comprehensively analyzed when the values of ξ, HGN, and θBN range, respectively, from 0.02 to 0.12, from 17.3 to 20.3 m, and from -15° to +15°. Results showed that the NO concentration at the furnace outlet monotonously decreased with ξ. The injection of biogas reduces both the peak temperature of the entire boiler furnace and the NO concentration at the furnace outlet. The NO emission concentration decreases with the increased ξ value for all types of biogases. The cocombustion with sawdust biogas indicates the least NO emission at a fixed cocombustion ratio. Furthermore, reducing the furnace height at HGN = 17.3 m or titling down the burner at θBN = -15° contributed to a greater NO concentration at the furnace outlet.
ABSTRACT
Abundant research findings have proved the value of two-dimensional (2D) materials in the study of nonlinear optics in fiber lasers. However, there remains two problems: how to reduce the start-up threshold, and how to improve the damage threshold, of fiber lasers based on 2D materials. A 15.1 mW low-threshold mode-locked fiber laser, based on a Cr2Si2Te6 saturable absorber (SA) prepared by the liquid-phase exfoliation method, is demonstrated successfully in this work. This provides a useful and economical method to produce SAs with low insertion loss and low saturation intensity. Besides, multiple high-order harmonics, from the fundamental frequency (12.6 MHz) to the 49th-order harmonic (617.6 MHz), mode-locked operations are recorded. The experimental results indicate the excellent potential of Cr2Si2Te6 as an optical modulator in exploring the soliton dynamics, harmonic mode locking, and other nonlinear effects in fiber lasers.
ABSTRACT
This paper reports the generation of fundamental solitons and third-order solitons in an erbium-doped fiber laser (EDFL) by a Cr2Ge2Te6-polyvinyl alcohol (CGT-PVA) saturable absorber (SA). Stable fundamental solitons at 1559.09 nm at a repetition frequency of 5.1 MHz were detected, and third-order solitons with a maximum output power of 6.807 mW and narrowest monopulse duration of 615.2 fs were obtained under a repetition frequency of 15.3 MHz by changing pump power. To the best of our knowledge, it is the first time to achieve a Q-switched pulse with a minimum pulse duration of 2.2 µs and maximum single pulse energy of 12.11 nJ in EDFL based on CGT-PVA SA after reducing the cavity length. Its repetition rate monotonically increased from 18.8 kHz to 61.8 kHz with a tuning range of about 43 kHz. The experimental results sufficiently demonstrate that CGT has enormous potential as an ultrafast photonics device.
ABSTRACT
A ferromagnetic insulator Cr2Ge2Te6 as a saturable absorber in an Er-doped fiber laser (EDFL) was demonstrated. In this work, a CGT-PVA composite film was successfully fabricated using the liquid-phase exfoliation method and employed in an EDFL. The modulation depth and saturation intensity of the SA are 4.26% and 89.40 MW/cm2, respectively. Stable pulses with a minimum pulse width of 978.5 fs when the repetition rate was 3.25 MHz were recorded experimentally. Furthermore, stable solitons still need to be obtained when the pulse energy in the cavity is as high as 11.6 nJ. The results fully suggest that CGT has outstanding nonlinear absorption properties, which may have broad potential applications in ultrafast photons.
ABSTRACT
Investigations of optical solitons have always been a hot topic due to their important scientific research value. In recent years, ultrafast lasers based on two-dimensional materials such as saturable absorbers (SAs) have become the focus of optical soliton research. In this work, various soliton operations are demonstrated in Er-doped fiber lasers (EDFLs) based on ${{\rm Cr}_2}{{\rm Si}_2}{{\rm Te}_6}$ SAs. First, a low-threshold passively mode-locked EDFL with traditional soliton output is constructed, and the pump threshold is as low as 10.1 mW. Second, by adjusting the net dispersion of the cavity, stable dissipative soliton operation can also be obtained. Traditional soliton mode-locked operation with controllable Kelly sidebands from first order to fourth order is realized by adjusting the pump power in a double-ended pumped structure, and the SNR is as high as 55 dB. All results prove that ${{\rm Cr}_2}{{\rm Si}_2}{{\rm Te}_6}$ used as SA material has great potential and wide application prospects in investigating optical soliton operations in mode-locked fiber lasers with both normal and anomalous dispersion.
ABSTRACT
In the process of drug carrier design, lysosome degradation in cells is often neglected, which makes a considerable number of drugs not play a role. Here, we have constructed a tumor treatment platform (Apn/siRNA/NLS/HA/Apt) with unique lysosomal escape function and excellent cancer treatment effect. Apoferritin (Apn) has attracted more and more attention because of its high uniformity, modifiability, and controllability. Meanwhile, its endogenous nature can avoid the risk of immune response being eliminated. We used aptamer modified iron deficient protein nanocages (Apn) to tightly encapsulate the combination of siRNA and NLS (siRNA/NLS) with influenza virus hemagglutinin (HA peptide). After Apn/siRNA/NLS/HA/Apt was targeted into cells, the acidic environment of lysosome led to the cleavage of Apn nanocages, and the release of siRNA/NLS and HA peptide. HA peptide can destroy lysosome membrane, make siRNA/NLS escape lysosome, and enter the nucleus under the action of NLS, resulting in efficient gene silencing effect. This kind of cancer treatment strategy based on Apn nanocage shows high biocompatibility and unique lysosome escape property, which significantly improves the drug delivery and treatment efficiency. Lysosomal escape protein nanocarriers for nuclear-targeted siRNA delivery.
Subject(s)
Cell Nucleus/metabolism , Drug Carriers , Lysosomes/metabolism , Proteins/administration & dosage , RNA, Small Interfering/administration & dosageABSTRACT
In our work, passively mode-locked and Q-switched Er-doped fiber lasers (EDFLs) based on titanium disulfide (TiS2) as a saturable absorber (SA) were generated successfully. Stable mode-locked pulses centred at 1531.69 nm with the minimum pulse width of 2.36 ps were obtained. By reducing the length of the laser cavity and optimizing the cavity loss, Q-switched operation with a maximum pulse energy of 67.2 nJ and a minimum pulse duration of 2.34 µs was also obtained. Its repetition rate monotonically increased from 13.17 kHz to 48.45 kHz with about a 35 kHz tuning range. Our experiment results fully indicate that TiS2 exhibits excellent nonlinear absorption performance and significant potential in acting as ultra-fast photonics devices.
ABSTRACT
Two-dimensional materials have extensively promoted the development of ultrafast photonics in the past decade. In our work, the saturable absorption properties of ZrSe2 were presented. The saturation intensity, modulation depth, and nonlinear absorption coefficient of the ZrSe2 saturable absorber (SA) are about 13.14MW/cm2, 6.09%, and 1.85∗10-1cm/GW. In the experiment, based on the ZrSe2 SA, two types of solitons were recorded. A conventional soliton with a pulse width of 985 fs and a three-pulse bound state soliton have been obtained. Our experiment reveals that ZrSe2 can be employed for generating multiple ultrafast soliton generations and possess promising application in ultrafast photonics.
ABSTRACT
Novel two-dimensional (2D)-materials-based ultra-fast modulators exhibit significance in extending the fundamental investigations and practical applications of mode-locked fiber lasers. In our work, employing the liquid-phase exfoliation method, a ${{\rm Cr}_2}{{\rm Ge}_2}{{\rm Te}_6}$Cr2Ge2Te6 (CGT) optical modulator with a modulation depth and a saturable intensity of 1.64% and ${6.31}\,\,{{\rm MW/cm}^2}$6.31MW/cm2 was fabricated. Due to its suitable modulation properties and high nonlinear coefficient, a stable bright-dark soliton pair was successfully achieved within an Er-doped fiber laser. Under the pump power of 560 mW, the maximum average output power was 5.36 mW with a pulse repetition rate of 1.835 MHz. Our results fully present the capacity of CGT in designing bright-dark soliton operations and provide a meaningful reference for promoting the ultra-fast modulation applications of ferromagnetic insulators.
ABSTRACT
In this paper, a novel high-energy mode-locked fiber laser based on the nonlinear polarization rotation (NPR) technique is presented to generate 331 nJ rectangular pulses. When pump power was 2659 mW, the maximum output power would be 102.3 mW; the maximum peak power was 41.74 W under the pump power of 1766 mW. In this study, the use of two homemade laser diodes and other common fiber devices was a vital step to achieve the low-cost and high-efficiency NPR mode-locked fiber laser. Based on these results, a novel approach could be developed to realize a high-energy rectangular pulse and promote the practical applications of the NPR mode-locked fiber laser in the field of ultrafast photonics.
ABSTRACT
In this study, a high-energy noise-like mode-locked Yb-doped fiber laser in a linear cavity was achieved with SnS2-polyvinyl alcohol film as the saturable absorber. In addition, the nonlinear saturable absorption characteristics of the SnS2 were investigated experimentally. The saturation intensity and modulation depth were about 6.01 MW/cm2 and 8.68%, respectively. Under pump power of 422 mW, stable noise-like mode-locked operation with a maximum output power and largest single pulse energy of 9.50 mW and 18.1 nJ, respectively, was obtained. To the best of our knowledge, this study is the first to observe and experimentally investigate noise-like operation in a linear laser cavity. Our study may provide some valuable design guidelines for noise-like operation and create new directions for advanced photonic devices based on SnS2.
ABSTRACT
Here, we have developed a facile fluorometric system for the detection of adenosine triphosphate (ATP) by a rolling circle amplification (RCA) based on proximity ligation mediated amplification, and simultaneously achieved the release of the anticancer drug doxorubicin (DOX) through the mesoporous silicon system. Once the ATP molecule is present, the linker DNA will be released from the graphene oxide (GO) surface and hybridized to the template DNA of the GO surface joining with ligation enzyme. RCA reaction is followed by the addition of the phi29 DNA polymerase. The product of RCA reaction contains a base fragment complementary to the signal DNA, allowing the fluorescent oligonucleotide probe to be released from the GO surface and fluorescence is recovered. The strong fluorescence signal realized the sensitive detection of ATP. Gate DNA were modified to the surface of the mesoporous silica (MSN) by electrostatic attraction to encapsulate DOX. After the above-mentioned RCA process, its result that long DNA chain containing a base fragment complementary to gate DNA, would be hybridized to the gate DNA strand on the surface of MSN, which opened the MSN hole and released the drug DOX into cell for HeLa cell therapy. And the specificity to folate receptor overexpressed on cell surface was satisfactory which would be beneficial for cancer therapy.
Subject(s)
Adenosine Triphosphate/analysis , Nucleic Acid Amplification Techniques/methods , Adenosine Triphosphate/chemistry , Antineoplastic Agents/administration & dosage , Antineoplastic Agents/chemistry , Cell Survival/drug effects , DNA/administration & dosage , Doxorubicin/administration & dosage , Doxorubicin/chemistry , Drug Delivery Systems , Drug Liberation , Folate Receptors, GPI-Anchored/metabolism , Folic Acid/administration & dosage , Folic Acid/chemistry , Graphite/administration & dosage , Graphite/chemistry , HeLa Cells , Humans , Nanoparticles/administration & dosage , Nanoparticles/chemistry , Oxides/administration & dosage , Oxides/chemistry , Propylamines/administration & dosage , Propylamines/chemistry , Silanes/administration & dosage , Silanes/chemistry , Silicon Dioxide/administration & dosage , Silicon Dioxide/chemistryABSTRACT
Herein, a simple and nice method to synthesize RNA membrane nanostructures for a controlled capture and cytosensing by aptamer and luminol-AuNPs (luAu NPs) is presented. The RNA membrane made up of many RNA transcripts was prepared by a one-pot reaction, the rolling circle transcription (RCT) process using rNTP and RNA polymerase, so the efficient RNA membrane could be obtained successfully at a much lower cost than the system used for RNA molecule synthesis commercially. The modifications of the NH2 group could not degrade the stability of RNA membrane in the serum. The prepared RNA membrane nanostructures showed interesting capture efficiencies toward the Ramos cell due to the effect of aptamer-ligand interactions on the nanostructures. Additionally, based on the detection of the luAu NP electrochemiluminescence (ECL) system, a novel enhancing method was employed by 3-aminopropyl-triethoxysilane (APS) for luAu NP ECL, which has never been reported, to improve the sensitivity. The ECL intensity was proportional to the target cell amounts, and the dynamic range was 50-5000 cells. The detection limit of the target cell amounts reached level 50. The specificity test and recovery test showed that the method had a good selectivity, stability, and repeatability. Therefore, this method will provide a favorable analysis for biosensing.
ABSTRACT
We present a universal amplified-colorimetric for detecting nucleic acid targets or aptamer-specific ligand targets based on gold nanoparticle-DNA (GNP-DNA) hybridization chain reaction (HCR). The universal arrays consisted of capture probe and hairpin DNA-GNP. First, capture probe recognized target specificity and released the initiator sequence. Then dispersed hairpin DNA modified GNPs were cross-linked to form aggregates through HCR events triggered by initiator sequence. As the aggregates accumulate, a significant red-to purple color change can be easily visualized by the naked eye. We used miRNA target sequence (miRNA-203) and aptamer-specific ligand (ATP) as target molecules for this proof-of-concept experiment. Initiator sequence (DNA2) was released from the capture probe (MNP/DNA1/2 conjugates) under the strong competitiveness of miRNA-203. Hairpin DNA (H1 and H2) can be complementary with the help of initiator DNA2 to form GNP-H1/GNP-H2 aggregates. The absorption ratio (A620/A520) values of solutions were a sensitive function of miRNA-203 concentration covering from 1.0 × 10-11 M to 9.0 × 10-10 M, and as low as 1.0 × 10-11 M could be detected. At the same time, the color changed from light wine red to purple and then to light blue have occurred in the solution. For ATP, initiator sequence (5'-end of DNA3) was released from the capture probe (DNA3) under the strong combination of aptamer-ATP. The present colorimetric for specific detection of ATP exhibited good sensitivity and 1.0 × 10-8 M ATP could be detected. The proposed strategy also showed good performances for qualitative analysis and quantitative analysis of intracellular nucleic acids and aptamer-specific ligands.
