VATS thoracic duct clipping in post-CABG with chylothorax.

Post-coronary artery bypass graft (CABG) surgery, chylothorax is a rare, but a serious, complication. We report a case of 49-year-old female who underwent CABG, and developed pleural effusion on post-operative day 2 which was milky in nature. Chylothorax was confirmed based on the biochemical analysis of the pleural fluid. As the medical line of management failed, video-assisted thoracoscopic surgery (VATS) was done and thoracic duct clipped on the right side. Close to the proximal portion of the left internal thoracic artery, disrupted tributaries of thoracic duct were noted and clipped. Rarity of the case and management is highlighted.

Unveiling the Success of Awake Insertion of Supraglottic Airway Device for Ventilation in the Bronchoscopic Management of Tracheal Stenosis.

Tracheal and subglottic stenoses are inflammatory conditions that can arise from a variety of potential etiologies, most commonly as a result of iatrogenic airway injury due to endotracheal intubation. Significant stenosis requires management by endoscopy or surgical resection. We describe a case of recurrent subglottic cuff stenosis with an episode of sudden desaturation in a 25-year-old female. The management involved balloon dilatation, laser ablation, and topical mitomycin C application through a flexible fiberoptic bronchoscope. Ensuring safe gas exchange during bronchoscopy was a priority, and this was achieved by maintaining ventilation with a supraglottic airway device, which was inserted in an awake patient after adequate tropicalization of the oral cavity. The intervention successfully helped in the management of stenosis and also addressed the complication of sudden complete airway collapse due to sedation.

Orthodontic-surgical management of severe skeletal class iii malocclusion: A case report.

Skeletal Class III malocclusion possess a difficult challenge to treat for clinicians. They are multifactorial and include genetic and environmental factors. Early intervention of Class III needs orthopedic correction, whereas, in adults, orthodontic camouflage can be done to treat mild cases while severe skeletal discrepancies demand orthognathic surgery along with orthodontic therapy. In this case report, a case of mandibular prognathism with Bilateral Sagittal Split Osteotomy (BSSO) setback was presented.

Evaluation of surface-modified orthodontic wires by different concentration and dipping duration of titanium oxide (TiO2) nanoparticles.

OBJECTIVE: To evaluate in-vitro surface characteristics and frictional properties of orthodontic stainless steel and beta-titanium archwires after surface modification with different concentrations and coating time of titanium oxide (TiO2) nanoparticles by Sol-gel dip coating method. MATERIALS AND METHODS: The experiment was carried out with 4 different concentrations (1:2, 1:4, 1:6, and 1:8) and three different dipping durations (24 hours, 48 hours, and 72 hours) over ten main test groups of SS and TMA archwires with uncoated wires acting as control in both dry and wet conditions. Phase analysis and surface characterization of TiO2 was analyzed by X-ray Diffractometry, surface evaluation with the help of scanning electron microscopy (SEM), and frictional characteristics were evaluated. RESULTS: Among all the concentrations 1:6 ratio with 48 hours of dipping duration showed better surface characteristics. A statistically significant difference in frictional coefficient was observed in both SS and TMA wires than their respective controls (p = 0.001). Intragroup comparison among SS and TMA groups showed that groups with 1:6 ratio and 48 hours dipping duration had least frictional coefficient in both dry and wet conditions (p = 0.001). Intergroup comparison between SS and TMA showed that SS group had significantly reduced friction than TMA (p = 0.001) except in few groups. CONCLUSION: TiO2 nanoparticle with a concentration ratio of 1:6 and 48 hours dipping duration is recommended for surface modification of orthodontic archwires.

Effect of orthodontic retraction force on thick and thin gingival biotypes in different grades of gingival recession and alveolar bone quality: A finite element analysis.

INTRODUCTION: To evaluate the effect of orthodontic retraction force on thick and thin gingival biotypes of anterior teeth having grade I and II gingival recession with D1 and D2 alveolar bone densities by assessing the displacement of teeth and deformation in gingival tissue, along with evaluating the amount of equivalent stress on teeth and gingiva in finite element model. MATERIALS AND METHOD: Based on cone-beam computed tomography datasets, eight models (LC01-LC08) of maxilla with appliance assembly were created. A retraction load of 150 gm was applied on each model during the finite element analysis (FEA), and then values of teeth displacement, gingival deformation, and von Mises stress were evaluated. RESULT: All the models with D1 bone density (LC01-04) were showing gingival deformation, whereas models with D2 bone quality (LC05-08) give no significant outcome. The amount of von Mises stress for teeth and gingival tissue in each model was the same for both central and lateral incisors. CONCLUSION: All the models having D1 bone quality showed greater gingival deformation after applying retraction force, whereas in models with D2 bone density, deformation was not significant. Changes in gingival tissue are brought about by orthodontic treatment, which also helps to correct the periodontal defects; however, bone density plays a significant role in improving gingival recession.

Assessment of gingival biotype in different facial patterns: A cross-sectional study.

Objective: The aim of the present study is to evaluate the relationship of gingival biotype in different malocclusions. Methods: A total of 157 periodontally healthy subjects (88 males and 69 females) were enrolled in this cross-sectional study. The study participants were divided into three groups of skeletal class I, class II, and class III. The probe transparency method was used to determine the quality and gingival tissue into thick and thin biotype. Results: There was significant difference in gingival biotype among different skeletal malocclusion with high prevalence of thin gingival biotype in class I subjects and more prevalence of thick biotype in class II and class III individuals (P-value: 0.022). Pairwise comparison of gingival biotype in class I versus class II showed significant difference (P-value: 0.032); however in class I versus class III and class II versus class III, the test result was nonsignificant. The overall frequency of thin gingival biotype was significantly less in female subjects with respect to males (P-value: 0.025). Conclusion: A significant relationship is present between skeletal malocclusion and quality of gingival biotype. The prevalence of thick gingival biotype is found more in females as compared to male individuals. The thin gingival biotype is more commonly seen in skeletal class I than class II and class III.

In vitro biocompatibility of polylactide and polybutylene succinate blends for urethral tissue engineering.

Surgical treatment of urothelial defects with autologous genital or extragenital tissue grafts is susceptible to complications. Tissue engineering utilizing novel biomaterials and cells such as human urothelial cells (hUC) for epithelial regeneration and adipose stromal cells (hASC) for smooth muscle restoration might offer new treatment options for urothelial defects. Previously, polylactide (PLA) has been studied for urethral tissue engineering, however, as such, it is too stiff and rigid for the application. Blending it with ductile polybutylene succinate (PBSu) could provide suitable mechanical properties for the application. Our aim was to study the morphology, viability and proliferation of hUC and hASC when cultured on 100/0 PLA/PBSu, 75/25 PLA/PBSu blend, 50/50 PLA/PBSu blend, and 0/100 PLA/PBSu discs. The results showed that the hUCs were viable and proliferated on all the studied materials. The hUCs stained pancytokeratin at 7 and 14 days, suggesting maintenance of the urothelial phenotype. The hASCs retained their viability and morphology and proliferated on all the other discs, except on PLA. On the PLA, the hASCs formed large aggregates with each other rather than attached to the material. The early smooth muscle cell markers SM22α and α-SMA were stained in hASC at 7 and 14 day time points on all PBSu-containing materials, indicating that hASCs maintain their smooth muscle differentiation potential also on PBSu. As a conclusion, PBSu is a highly potential biomaterial for urothelial tissue engineering since it supports growth and phenotypic maintenance of hUC and smooth muscle differentiation of hASC.

A Real-World Perspective of Co-amoxiclav Prescription Pattern With Probiotics for Pediatric Patients With Respiratory Tract Infections: Results of Quantitative and Qualitative Approach in Indian Outpatient Settings.

BACKGROUND: Probiotics are co-prescribed with co-amoxiclav to prevent antibiotic-associated diarrhea (AAD). The study assesses the co-prescription pattern of probiotics with co-amoxiclav in pediatric patients with respiratory tract infections (RTIs). METHODS: This was a mixed methods research study with a retrospective study and a prospective survey. The retrospective part included a multicenter, observational, real-world study utilizing patients' electronic medical records for three years (2018-2020) from seven outpatient pediatric clinics and hospitals. The qualitative evaluation was performed with a predefined questionnaire. RESULTS: The patients having RTIs (N=984) were prescribed Clamp® (46.7%), CAA (23.8%), and CAM (29.5%). The mean age of the patients was 4.05 years, with 59.25% males and most patients having upper RTIs. Co-amoxiclav was prescribed twice daily for one to 15 days. A significantly lesser number of probiotic co-prescriptions were observed with Clamp® (19.57%) than with CAA (38.46%) and CAM (29.31%) at baseline (p<0.001). Similar findings were observed for follow-up visits one and two. Saccharomyces boulardii, Bacillus clausii,and lactic acid bacillus were the most commonly co-prescribed probiotics. The qualitative evaluation indicated that most clinicians were aware of the co-amoxiclav-related gastrointestinal side effects and the benefits of probiotics in preventing them. CONCLUSION: The frequency of co-prescriptions of probiotics with Clamp® among pediatric patients with RTIs was significantly less, potentially indicating better gastrointestinal tolerability.

Multiple subtypes of coxsackievirus group B can cause congenital heart disease.

BACKGROUND: Different serotypes of coxsackievirus B (CVB), which is the most common cause of viral myocarditis, target cardiomyocytes through Coxsackie and Adenovirus Receptor and Decay-Accelerating Factor. Both receptors are expressed in the fetal heart. We hypothesized that infection with different serotypes of CVB during early pregnancy plays a role in pathogenesis of congenital heart defect (CHD). METHODS: In this study, we use a murine model to infect with CVB1, CVB4, and combination of CVB3 + CVB4 during a critical period in gestation. We examined offspring of pregnant mice for fetal death and heart defects following viral infection. RESULT: Fetuses from uninfected control dams showed normal heart development, while maternal CVB infection precipitates CHD: majorly ventricular septal defects (VSD) and non-compaction of ventricular myocardium (NC), with some infrequent cases of double outlet right ventricle, left ventricle wall rupture, right ventricle hypertrophy, and thickened/dysplastic semilunar valves. Infection of pregnant dams with CVB1 leads to 44% VSD and 41.2% NC cases, while with CVB4 leads to 31.7% VSD and 13.3% NC cases. Co-infection with CVB3 + CVB4 increases fetal pathology to 51.3% VSD and 41% NC cases. Infection can also result in fetal death, with higher incidences with CVB3 + CVB4 with 46.2% cases, compared to 33.3% by CVB1 and 21.7% by CVB4. Male fetuses were more susceptible to all phenotypes. CONCLUSION: Our report shows that prenatal CVB infections can lead to pathogenesis of certain heart defects in mouse model, particularly exacerbated with co-infections. This data confirms a link between prenatal CVB infection and CHD development and highlights it is not unique to just one serotype of CVB.

Comparative evaluation of high-flow nasal cannula oxygenation vs nasal intermittent ventilation in postoperative paediatric patients operated for acyanotic congenital cardiac defects.

Background: This study aimed to compare high-flow nasal cannula (HFNC) oxygenation vs nasal intermittent ventilation (NIV) oxygenation for respiratory care after extubation in postoperative paediatric cardiac patients. Methods: This study was a randomised controlled trial. One hundred twenty-one paediatric patients with acyanotic congenital heart disease undergoing corrective cardiac surgery on cardiopulmonary bypass were included in the study. Patients were randomised to receive either HFNC (AIRVO) or NIV (RAM Cannula) postextubation. Arterial blood gas was analysed at different time points perioperatively. Results: Patients in both the groups were matched with respect to diagnosis and demographic profiles. Baseline hemodynamic and respiratory parameters were also similar in both the groups. Patients in HFNC/AIRVO group did not show improved carbon dioxide (CO2) washout but showed improved pO2 and pO2/FiO2 ratio immediate postextubation. Reintubation rate and other intensive care unit (ICU) complications were similar in both the groups. Conclusion: Postcardiopulmonary bypass respiratory complications in paediatric patients with congenital acyanotic heart disease can be minimised with newer oxygen therapy devices such as AIRVO (HFNC) or RAM cannula (NIV). In comparison between these two, AIRVO did not show improved CO2 washout over RAM cannula; however, it did provide better oxygenation as measured by pO2 in arterial blood and pO2/FiO2 ratio immediate postextubation. Also, long-term results such as duration of mechanical ventilation and ICU stay were not affected by the choice of device.

Fast-tracking with continuous thoracic epidural analgesia in paediatric congenital heart surgeries: an institutional experience.

Objective: To assess the success of fast-tracking in infants and small children undergoing paediatric cardiac surgery under general anaesthesia with continuous thoracic epidural analgesia (TEA). Methodology: It is a retrospective study at a tertiary care hospital. A total of 461 children, aged 12 years or younger, were operated for congenital heart disease over a 2-year period from January 2018 to December 2019. After the exclusion of 71 patients, data from the remaining 390 patients were analysed. Measurements and main results: The median time for extubation after intensive care unit admission was 2 h and 25 min (0-20 h). Extubation within 6 h was achieved in 215 patients (~ 55%). Patients in the early extubation group had significantly shorter hospital stay (4.1 ± 2.3 vs 6.9 ± 3.9 days, p = 0.004) than patients in the ventilated group. Reintubation was required in 27 (6.9%) patients. Thirteen patients died postoperatively on ventilator. Patients with low nadir temperature intraoperatively and cardiopulmonary bypass time > 90 min significantly predicted failure in fast-tracking with an odds ratio (OR) = 1.27; CI: 1.18-1.38 and OR = 2.3; CI: 1.8-2.96 respectively. The Society of Thoracic Surgeons-European Association for Cardio-Thoracic Surgery Congenital Heart Surgery mortality score, younger age, Down syndrome and high vasopressor inotropic score did not adversely affect early extubation, contrary to contemporary concerns. Conclusions: A multimodal approach for perioperative pain relief and sedation consisting of propofol and dexmedetomidine infusion along with TEA ensures early extubation in 59% of the cases undergoing paediatric cardiac surgery. Our data suggests that fast-tracking is feasible with safe and superior outcomes in a subset of appropriate patients undergoing paediatric cardiac surgery. Supplementary Information: The online version contains supplementary material available at 10.1007/s12055-022-01373-8.

Assessment of chin morphology in different skeletal dysplasia - A cross-sectional study.

Objective: The objective of the study is to evaluate the morphology of the symphyseal region of adult skeletal Class II and Class III malocclusion as compared with Skeletal Class I subjects. Materials and Methods: The symphyseal width and height were evaluated using data from 80 lateral cephalograms of the age range of 18 years to 25 years. Average growing Skeletal Class II (n = 30) and Class III (n = 20) subjects were used as a comparison group. Average growing normal occlusion samples (n = 30) were used as controls. Results: Alveolar height was similar in all groups. The width of the symphyseal region including basal width, the width of the cervical region of the lower central incisor at the cementoenamel junction, and symphysis width were found to be similar in all groups. There is no significant difference in gonial angle in both Class II and III groups as compared to control. Articular angle showed no significant difference. Mandibular incisor dentoalveolar height (L1-AH) was found to be significantly higher in the Class II group (P < 0.05). Conclusions: There are no definite morphological differences in the symphyseal region between average grower Class I, Class II, and Class III skeletal malocclusions except mandibular incisor dentoalveolar height (L1-AH) and incisor mandibular plane angle which is higher whereas ramus length and body length which is lesser in Class II group as compared with controls. Width of the cervical region of the lower central incisor at the cementoenamel junction (Id-Id') and incisor mandibular plane angle was lower than control in Class III subjects.

Programmable Droplet Microfluidics Based on Machine Learning and Acoustic Manipulation.

Typical microfluidic devices are application-specific and have to be carefully designed to implement the necessary functionalities for the targeted application. Programmable microfluidic chips try to overcome this by offering reconfigurable functionalities, allowing the same chip to be used in multiple different applications. In this work, we demonstrate a programmable microfluidic chip for the two-dimensional manipulation of droplets, based on ultrasonic bulk acoustic waves and a closed-loop machine-learning-based control algorithm. The algorithm has no prior knowledge of the acoustic fields but learns to control the droplets on the fly. The manipulation is based on switching the frequency of a single ultrasonic transducer. Using this method, we demonstrate 2D transportation and merging of water droplets in oil and oil droplets in water, and we performed the chemistry that underlies the basis of a colorimetric glucose assay. We show that we can manipulate drops with volumes ranging from ∼200 pL up to ∼30 nL with our setup. We also demonstrate that our method is robust, by changing the system parameters and showing that the machine learning algorithm can still complete the manipulation tasks. In short, our method uses ultrasonics to flexibly manipulate droplets, enabling programmable droplet microfluidic devices.

Perception of facial esthetics in young North Indian population.

INTRODUCTION: A person's ability to recognize a beautiful face is innate, but translating this into defined treatment goals is a challenge for clinicians. AIM: To determine if faces considered esthetic and pleasing in the young North Indian population (both males and females) exhibit similar cephalometric measurements as used for ideal treatment and successful results. MATERIALS AND METHOD: A panel of five judges evaluated a set of one frontal, one frontal during smiling, and one profile extra-oral photograph of 160 students (80 females and 80 males) on a five-point attractiveness scale. For each photographic set, the mean and final scores were calculated. Once the sample was assessed, 60 subjects (30 females and 30 males) with the highest final facial aesthetic score were selected and cephalometric analysis was performed. The obtained data were subjected to statistical analysis using SPSS 20 software. RESULTS: Both males and females with class I skeletal jaw bases were found to be attractive. The females with short faces; mild facial convexity and lower lip closer to the esthetic line were found to be attractive. The males with a prominent chin, straight profile, prominent nose, increased upper lip thickness, upper lip length, and lower lip length were found to be attractive. CONCLUSION: The faces considered attractive in this study fulfilled most of the cephalometric norms commonly used for the diagnosis and treatment planning except for a few inconsistencies which may be attributed to the gender and demographic origin.

The effect of various nanoparticle coating on the frictional resistance at orthodontic wire and bracket interface: A systematic review.

This systematic review was aimed to test the null hypothesis that coating of orthodontic wires with nanoparticles does not affect the frictional properties at bracket--wire interface. Electronic database searches were performed up to September 2020. In vitro studies were considered for reviewing process. Study selection, data extraction, risk of bias assessment was performed during reviewing process. Only qualitative analyses of included literature were done due to the presence of heterogeneity among the studies. Out of 1,068 retrieved records, nine studies satisfied the inclusion criteria and included in this review. Studies were assessed at low risk to high risk of bias according to certain parameters. Wide variety of nanoparticles were used for surface coating of orthodontic wires of variable sizes, shapes, and materials like stainless steel, NiTi, and TMA and placed into the slots of different types of orthodontic brackets to evaluate the alteration in frictional and other mechanical properties. Most of the studies clearly indicate that coating with nanoparticles decreases the friction between wire and bracket interface under specified in vitro conditions. Furthermore, among the nine included studies, only two considered evaluation of effect of coated brackets on frictional and other mechanical properties and results were heterogeneous. The null hypothesis is rejected and it is concluded that the wires coated with nanoparticles might offer a novel opportunity to substantially reduce frictional resistance at bracket--wire interface during tooth movement. Further studies are necessary to strengthen the evidence regarding effect of coated brackets on frictional properties.

Possible Association of Pulmonary Atresia with In-Utero Coxsackievirus B Exposure.

Gestational viral infection has been associated with congenital heart disease (CHD). Few studies, however, have studied the potential role of gestational Coxsackievirus B (CVB) exposure in the pathogenesis of CHD. We prospectively enrolled women with pregnancies affected by CHD to explore possible associations with in utero CVB exposure. Serum samples were obtained from 122 women referred for fetal echocardiography between 2006 and 2018. We quantified CVB IgG and IgM levels, with titers ≥ 15.0 U/mL considered positive and measured neutralizing antibodies for three CVB serotypes: CVB1, CVB3, and CVB4. Using data from the national enterovirus surveillance system, we compared the annual exposure rates for each serotype in our cohort to infections reported across the United States. 98 pregnancies with no genetic defects were included. Overall, 29.6% (29/98) had positive IgG and 4.1% (4/98) of women had positive CVB IgM titers. To explore first-trimester CVB exposure, we focused exclusively on the 26 women with positive IgG and negative IgM titers. 61.5% (16/26) had neutralizing antibodies against a single serotype and 38.5% (10/26) against multiple CVB serotypes. CVB4 neutralizing antibodies were the most common (65.4%, 17/26), followed by CVB3 (53.9%, 14/26) and CVB1 (30.8%, 8/26). Among these, 30.8% of babies presented pulmonary valve anomalies: 19.2% (5/26) pulmonary atresia, and 11.5% (3/26) pulmonary stenosis. 23.1% (6/26) of babies had coronary sinusoids. CVB exposure in our cohort mirrored that of reported infections in the United States. Our results suggest a possible association between gestational CVB exposure and specific CHD, particularly pulmonary valve anomalies and coronary sinusoids.

Comparative analysis of proficiencies of various textures and geometric features in breast mass classification using k-nearest neighbor.

This paper introduces a comparative analysis of the proficiencies of various textures and geometric features in the diagnosis of breast masses on mammograms. An improved machine learning-based framework was developed for this study. The proposed system was tested using 106 full field digital mammography images from the INbreast dataset, containing a total of 115 breast mass lesions. The proficiencies of individual and various combinations of computed textures and geometric features were investigated by evaluating their contributions towards attaining higher classification accuracies. Four state-of-the-art filter-based feature selection algorithms (Relief-F, Pearson correlation coefficient, neighborhood component analysis, and term variance) were employed to select the top 20 most discriminative features. The Relief-F algorithm outperformed other feature selection algorithms in terms of classification results by reporting 85.2% accuracy, 82.0% sensitivity, and 88.0% specificity. A set of nine most discriminative features were then selected, out of the earlier mentioned 20 features obtained using Relief-F, as a result of further simulations. The classification performances of six state-of-the-art machine learning classifiers, namely k-nearest neighbor (k-NN), support vector machine, decision tree, Naive Bayes, random forest, and ensemble tree, were investigated, and the obtained results revealed that the best classification results (accuracy = 90.4%, sensitivity = 92.0%, specificity = 88.0%) were obtained for the k-NN classifier with the number of neighbors having k = 5 and squared inverse distance weight. The key findings include the identification of the nine most discriminative features, that is, FD26 (Fourier Descriptor), Euler number, solidity, mean, FD14, FD13, periodicity, skewness, and contrast out of a pool of 125 texture and geometric features. The proposed results revealed that the selected nine features can be used for the classification of breast masses in mammograms.

Computational screening of FDA approved drugs of fungal origin that may interfere with SARS-CoV-2 spike protein activation, viral RNA replication, and post-translational modification: a multiple target approach.

Coronavirus spread is an emergency reported globally, and a specific treatment strategy for this significant health issue is not yet identified. COVID-19 is a highly contagious disease and needs to be controlled promptly as millions of deaths have been reported. Due to the absence of proficient restorative alternatives and preliminary clinical restrictions, FDA-approved medications can be a decent alternative to deal with the coronavirus malady (COVID-19). The present study aims to meet the imperative necessity of effective COVID-19 drug treatment with a computational multi-target drug repurposing approach. This study focused on screening the FDA-approved drugs derived from the fungal source and its derivatives against the SARS-CoV-2 targets. All the selected drugs showed good binding affinity towards these targets, and out of them, bromocriptine was found to be the best candidate after the screening on the COVID-19 targets. Further, bromocriptine is analyzed by molecular simulation and MM-PBSA study. These studies suggested that bromocriptine can be the best candidate for TMPRSS2, Main protease, and RdRp protein. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s40203-021-00089-8.

Prediction of spontaneous eruption of palatally displaced canine based on variables measurements in panoramic radiograph: A systematic review.

OBJECTIVE: This systematic review was aimed to find out possible predictive variables measured on panoramic radiographs to predict spontaneous eruption of palatally displaced canine (PDC) after interceptive extraction in late mixed dentition. MATERIALS AND METHODS: Electronic database searches were performed in MEDLINE, Cochrane's CENTRAL, Scopus, and in other sources up to June 2020. Randomized and nonrandomized controlled trials, and pre-post prospective studies without control groups were considered for review. Study selection, data extraction, risk of bias assessment (by RoB 2.0, ROBINS-I, and NHLBI score), and the certainty of evidence evaluation (GRADE approach) were performed during reviewing process. Only qualitative analyses of included literature were done due to presence of between study heterogeneity. RESULTS: Out of 970 retrieved records, 3 controlled trials and 3 prospective before and after studies without control fulfilled the eligibility criteria and were included in the review. Studies were assessed at low risk to high risk of bias. Overall certainty was moderate to very low. Results shows that PDCs in distal sectors, lower alpha angle, younger subjects, PDCs with less advanced developed root were significantly benefited from interceptive extraction. However, Vertical distance had insignificant roll on eruption prediction. CONCLUSIONS: Interceptive extraction at younger age, mesial canine crown position (sectors), and mesial inclination of PDC (alpha angulation) are the most important variables predicting the spontaneous eruption of palatally displaced canine. Findings of this review can be utilized to make evidence-based decisions for managing PDCs with diverse sectors and mesial inclinations. However, well designed clinical trials are recommended to strengthen the evidence.