Carbon supported ternary layered double hydroxide nanocomposite for Fluoxetine removal and subsequent utilization of spent adsorbent as antidepressant.

Fluoxetine (FLX) is one of the most persistent pharmaceuticals found in wastewater due to increased use of antidepressant drugs in recent decades. In this study, a nanocomposite of ternary ZnCoAl layered double hydroxide supported on activated carbon (LAC) was used as an adsorbent for FLX in wastewater effluents. The nanocomposite was characterized using Fourier Transform Infrared Spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and surface area analysis (BET). The adsorption investigations showed that the maximum removal capacity was achieved at pH 10, with a 0.1 g/L adsorbent dose, 50 mL volume of solution, and at a temperature of 25 °C. The FLX adsorption process followed the Langmuir-Freundlich model with a maximum adsorption capacity of 450.92 mg/g at FLX concentration of 50 µg/mL. Density functional theory (DFT) computations were used to study the adsorption mechanism of FLX and its protonated species. The safety and toxicity of the nanocomposite formed from the adsorption of FLX onto LAC (FLX-LAC) was investigated in male albino rats. Acute toxicity was evaluated using probit analysis after 2, 6, and 24 h to determine LD50 and LD100 values in a rat model. The FLX-LAC (20 mg/kg) significantly increased and lengthened the sleep time of the rats, which is important, especially with commonly used antidepressants, compared to the pure standard FLX (7 mg/kg), regular thiopental sodium medicine (30 mg/kg), and LAC alone (9 mg/kg). This study demonstrated the safety and longer sleeping duration in insomniac patients after single-dose therapy with FLX-LAC. Selective serotonin reuptake inhibitors (SSRIs) like FLX were found to have decreased side effects and were considered the first-line mood disorder therapies.

Sonochemical synthesis of heterostructured ZnO/Bi2O3 for photocatalytic desulfurization.

In this study, metal oxides nanoparticles heterogeneous photocatalysts prepared by coprecipitation and ultrasonic techniques were used for diesel desulfurization. They were characterized by scanning electron microscope, powder X-ray diffraction, energy dispersive analysis, diffused reflectance spectra, photoluminescence analysis and BET surface area. The surface area of catalyst B is larger than catalyst A confirming its higher reactivity. X-ray reflectance spectroscopy was used to analyze the sulfur contents in feed. Thiophene was used as a model fuel to evaluate the photocatalytic activity of catalysts A and B. Using the Scherrer equation, sharp and intense signals suggesting their higher degrees of crystallinity, with average crystal sizes for ZnO, Bi2O3, catalysts A and B, respectively; of 18, 14.3, 29.7, and 23.8 nm. The operational parameters of the desulfurization process were optimized and have been studied and the maximum sulfur removal was achieved via a further solvent extraction step. A diesel fuel with a 24 and 19 ppm sulfur content and hence a total sulfur removal of 94.6% and 95.7% was acquired for catalysts A and B, respectively (sulfur compounds concentration in diesel fuel feedstock was 450 ppm). These findings demonstrated that photocatalysts A and B are good and effective catalysts for desulfurization of diesel fuel.

Spectroscopic investigation, thermal behavior, catalytic reduction, biological and computational studies of novel four transition metal complexes based on 5-methylthiophene Schiff base type.

Four new complexes prepared from 5-Methyl-2-carboxaldehyde-thiophene and 2,6-pyridinediamine with cobalt, nickel, copper and cadmium ions have been synthesized because of the significance of these complexes in pharmacological research and catalytic reduction. The prepared compounds were characterized using elemental analysis, mass, UV-visible, NMR and FTIR spectroscopy, as well as molar conductance, magnetic susceptibility measurements, fluorescence properties and TGA analysis. The stoichiometry mode was confirmed as 1:1 (metal: ligand) for Co, Ni and Cu complexes and 1:2 (metal: ligand) for Cd complex according to the results of the elemental and spectral studies. Furthermore, the thermal stability and luminescence properties of complexes have been studied. Thermal studies confirmed the presence of water molecules. The thermodynamic properties of the complexes were measured via the Coats-Redfern procedure. The geometric structures of the complexes were found to be octahedral around the metal ions. The optical energy gaps (Eopt) vary between 2.92 and 3.71 eV indicating that these compounds can be used as selective absorbing solar energy in photovoltaic applications. In the presence of NaBH4, the greatest reduction efficiency for the conversion of 2-NP to 2-AP was discovered to be 73-91% within 15-25 min. In vitro, high antifungal and antibacterial activity was shown by complexes than the ligand alone. The Cd(II) complex was shown to have greater activity than all of the examined microorganisms when compared to the reference drug in addition it had 4.94 µg/ml minimal inhibitory concentration against "S. aureus", "B. subtilis", and "E. coli". The bond angles, bond lengths, and quantum chemical factors of the ligand and complexes were shown in the molecular modeling using the DFT approach. The studied compounds' binding modes were confirmed using the Gaussian 09 program.

Synthesis, Characterization, DFT Studies of Novel Cu(II), Zn(II), VO(II), Cr(III), and La(III) Chloro-Substituted Schiff Base Complexes: Aspects of Its Antimicrobial, Antioxidant, Anti-Inflammatory, and Photodegradation of Methylene Blue.

A new chlorobenzylidene imine ligand, (E)-1-((5-chloro-2-hydroxybenzylidene)amino) naphthalen-2-ol (HL), and its [Zn(L)(NO3)(H2O)3], [La(L)(NO3)2(H2O)2], [VO(L)(OC2H5)(H2O)2], [Cu(L)(NO3)(H2O)3], and [Cr(L)(NO3)2(H2O)2], complexes were synthesized and characterized. The characterization involved elemental analysis, FT-IR, UV/Vis, NMR, mass spectra, molar conductance, and magnetic susceptibility measurements. The obtained data confirmed the octahedral geometrical structures of all metal complexes, while the [VO(L)(OC2H5)(H2O)2] complex exhibited a distorted square pyramidal structure. The complexes were found to be thermally stable based on their kinetic parameters determined using the Coats-Redfern method. The DFT/B3LYP technique was employed to calculate the optimized structures, energy gaps, and other important theoretical descriptors of the complexes. In vitro antibacterial assays were conducted to evaluate the complexes' potential against pathogenic bacteria and fungi, comparing them to the free ligand. The compounds exhibited excellent fungicidal activity against Candida albicans ATCC: 10231 (C. albicans) and Aspergillus negar ATCC: 16404 (A. negar), with inhibition zones of HL, [Zn(L)(NO3)(H2O)3], and [La(L)(NO3)2(H2O)2] three times higher than that of the Nystatin antibiotic. The DNA binding affinity of the metal complexes and their ligand was investigated using UV-visible, viscosity, and gel electrophoresis methods, suggesting an intercalative binding mode. The absorption studies yielded Kb values ranging from 4.40 × 105 to 7.30 × 105 M-1, indicating high binding strength to DNA comparable to ethidium bromide (value 107 M-1). Additionally, the antioxidant activity of all complexes was measured and compared to vitamin C. The anti-inflammatory efficacy of the ligand and its metal complexes was evaluated, revealing that [Cu(L)(NO3)(H2O)3] exhibited the most effective activity compared to ibuprofen. Molecular docking studies were conducted to explore the binding nature and affinity of the synthesized compounds with the receptor of Candida albicans oxidoreductase/oxidoreductase INHIBITOR (PDB ID: 5V5Z). Overall, the combined findings of this work demonstrate the potential of these new compounds as efficient fungicidal and anti-inflammatory agents. Furthermore, the photocatalytic effect of the Cu(II) Schiff base complex/GO was examined.

Novel Bromo and methoxy substituted Schiff base complexes of Mn(II), Fe(III), and Cr(III) for anticancer, antimicrobial, docking, and ADMET studies.

In this study, four new Mn(II), Fe(III), and Cr(III) complexes with two Schiff base ligands namely, 4-bromo-2-[(E)-{[4-(2-hydroxyethyl)phenyl]imino}methyl]phenol (HL1) and 2-[(E)-{[4-(2-hydroxyethyl)phenyl]imino}methyl]-4-methoxy phenol (HL2) have been synthesized and characterized. Different analytical and spectral methods have been used to characterize the ligands and their complexes. General formulas of [M(L)Cl2(H2O)2] for FeL1, CrL1 and CrL2, and [M(L)Cl(H2O)3] for MnL2 were proposed. HOMO and LUMO energies, as well as the electrical characteristics, have been calculated using DFT/B3LYP calculations with Gaussian 09 program. The optimized lowest energy configurations of the complexes are proven. The disc diffusion technique was used to test the pharmacological activities' antibacterial efficacy against diverse bacterial and fungus species. The MTT technique was used to assess the in vitro cytotoxicity of the ligands and their metal complexes on the Hep-G2 human liver carcinoma cell line and the MCF-7 human breast cancer cell line. All compounds displayed better activity compared to the free ligands. MnL2 complex showed predominant activity when compared to the other complexes with an IC50 value of 2.6 ± 0.11 µg/ml against Hep-G2, and against MCF-7 the IC50 value was 3.0 ± 0.2 µg/ml which is less than the standard drug cisplatin (4.0 µg/ml). UV-vis electronic spectrum and gel electrophoresis techniques have been used to investigate the compounds' affinity to bind and cleavage CT-DNA. The interaction's binding constants, or Kb, have been identified, and it was discovered that the new complexes' binding affinities are in the order of FeL1 > MnL2 > CrL2 > CrL1, and the binding mechanism has been suggested. To assess the kind of binding and binding affinity of the investigated drugs with human DNA, a molecular docking study was carried out (PDB:1bna). The acquired results supported the intercalation binding mechanism proposed in the experimental part and revealed that complexes may be inserted into the DNA molecule to stop DNA replication. According to ADMET data, the synthesized compounds have a high bioavailability profile and their physicochemical and pharmacological features remained within Lipinski's RO5 predicted limitations.

[Cu(dipicolinoylamide)(NO3)(H2O)] as anti-COVID-19 and antibacterial drug candidate: Design, synthesis, crystal structure, DFT and molecular docking.

For first time the new N-picolinoypicolinlamide was obtained as in situ ligand during the reaction of 2,4,6-ris(2-pyridyl)-,3,5-triazine with aqueous solution of CuNO3·3H2O and formed the corresponding complex [Cu(dipicolinoylamide)(NO3)(H2O)]. The crystal structure of the obtained complex was determined by x-ray structure. The complex crystallizes in space group P21/n, a = 10.2782(9) Å, b = 7.5173(6) Å, c = 17.738(2) Å, α = 90.00°, ß = 91.368(1)°, γ = 90.00°, V = 1370.1(2) Å3, Z = 4. The copper center has a distorted octahedral geometry. DFT calculations show good agreement between theoretical and X-ray data. The Molecular docking studies were executed to consider the nature of binding and binding affinity of the synthesized compounds with the receptor of COVID-19 main protease viral protein (PDB ID: 6lu7), the receptor of gram -ve bacteria (Escherichia coli, PDB ID: 1fj4) and the receptor of gram +ve bacteria (Staphylococcus aureus, PDB ID: 3q8u and Proteus PDB ID: 5i39) and with human DNA. Finally, in silico ADMET predictions was also examined.

Cellulose-based activated carbon/layered double hydroxide for efficient removal of Clarithromycin residues and efficient role in the treatment of stomach ulcers and acidity problems.

The terrible rise of antibiotic residues which possesses a serious threat to the ecological and aquatic environments. So, the development of highly cost-effective, highly operation-convenient and recyclable adsorbents was a must. In our study, we utilized the ternary layered double hydroxide (CoZnAl LDH) as an efficient adsorbent and nano-carrier for Clarithromycin (CLA) residues for their biodegradability and biocompatibility. Also, we enhanced the removal efficiency of the synthesized ternary LDH using cellulose-based activated carbon which was obtained using the hydrothermal carbonization method followed by chemical activation via static air converting the cellulose derivative (hydroxy ethyl cellulose HEC) into highly porous activated carbon that played an important role in the adsorption process. Full characterization of the synthesized activated carbon (AC) and the adsorbents before and after the adsorption processes were carried out using different techniques. The differences between the two adsorbents were investigated in a comparative study in terms of factors affecting the adsorption process like pH, the dose of adsorbent, time, and temperature. The adsorption isotherm was investigated at pH 10 with high regression coefficient (R2) of 0.99 showing maximum adsorption capacity (qmax) of 61.5 mg/g for (CLA) using LDH as adsorbent, whereas, the investigation using the modified LDH (LDH-AC) with high regression coefficient (R2) of 0.99 shows maximum adsorption capacity (qmax) of 495 mg/g for (CLA). Kinetic studies were estimated. The thermodynamic parameters such as ΔS°, ΔG° and ΔH° were estimated showing that the adsorption processes undergo exothermic and spontaneous routes. The safety and cytotoxicity of the modified, synthesized LDH (LDH-AC) were investigated besides the investigation of the gastroprotective efficacy against generated stomach ulcers. (LDH-AC) showed significant reduction for the generated ulcer in addition to the enhancement of the gastro protective efficacy revealing the safe use of LDH-AC/CLA for biological purposes like ulcer reduction and the enhancement of the ulcer inhibition.

Oxidative DNA cleavage mediated by a new unexpected [Pd(BAPP)][PdCl4] complex (BAPP = 1,4-bis(3-aminopropyl)piperazine): crystal structure, DNA binding and cytotoxic behavior.

A novel Pd(ii) double complex, [Pd(BAPP)][PdCl4], containing the 1,4-bis(3-aminopropyl)piperazine (BAPP) ligand is investigated. X-ray crystallography of a single crystal confirmed the structure of the [Pd(BAPP)][PdCl4] complex. The spectroscopic behavior was also elucidated using elemental analysis, nuclear magnetic resonance and Fourier-transform infrared spectroscopy, and mass spectrometry. The antimicrobial susceptibility of the [Pd(BAPP)][PdCl4] complex against all tested microbial strains was lower than that of the BAPP ligand except for C. albicans. The cytotoxic impacts of the BAPP ligand and its [Pd(BAPP)][PdCl4] complex were evaluated in vitro for HepG2, CaCo-2 and MCF7 cell lines as well as the WI-38 normal cell line. The anticancer activity was markedly improved by the complexation. The [Pd(BAPP)][PdCl4] complex could selectively inhibit the tested cancer cells in a safe way to the non-tumorigenic cell (WI-38). From the DNA binding studies with ultraviolet-visible spectrophotometry, the [Pd(BAPP)][PdCl4] complex interacts more efficiently with the calf thymus DNA than its BAPP ligand through the intercalative binding mode. In the absence of an external reductant, the [Pd(BAPP)][PdCl4] complex cleaved the intact supercoiled pBR322 DNA under physiological conditions in a concentration-dependent manner. Additionally, electrophoretic experiments were performed in the presence of different radical scavengers, namely DMSO, NaN3 and KI, and ruled out the hydrolytic mechanistic pathway of the reaction and suggested that the oxidative mechanism is the preferred one. The results of the binding affinity of the [Pd(BAPP)][PdCl4] complex to human DNA were modeled using a molecular docking study showing that the complex interacts more strongly with human DNA than the ligand. Finally, an in vitro pharmacokinetic study was assessed through in silico ADME predictions.

Developing the sensing features of copper electrodes as an environmental friendly detection tool for chemical oxygen demand.

The chemical oxygen demand (COD) of water bodies is an essential indicator of organic contaminants. The majority of current testing methods have the drawbacks of requiring multiple processes, being time-consuming, and requiring the use of harmful and hazardous reagents. In this work, a low-cost copper wire (Cu-wire) electrode was designed and fabricated to be used as a sensing electrode for the detection of chemical oxygen demand in water. The sensing features were developed by electrodeposition of copper nanoparticles (nano-Cu) that were prepared by fast-scan cyclic voltammetry (FSCV) deposition at the optimum preparation conditions. For improving the adherence and stability of the deposited nano-Cu thin layer, the Cu-wire electrode was scratched to increase the surface roughness. The surface morphology of the prepared nano-Cu/Cu-wire electrode was investigated by scanning electron microscope (SEM). Energy-dispersive X-ray spectrometer (EDX) was used for elemental analysis characterization. The non-modified and the nano-copper modified electrode were utilized and optimized for electrochemical assay of COD using glycine as a standard in 0.075 M NaOH as an electrolyte solution. The calibration curves (COD, mg L-1 vs. I, mA) were plotted from linear sweep voltammetry (LSV) and chronoamperometry (I-t) curves for a wide range of COD under the optimized conditions. It shows that the electroanalytical features of the proposed nano-Cu-based COD sensor exhibit a linear range from 2 to 595 mg L-1 and a lower limit of detection (LOD) of 2.6 mg L-1 (S/N = 3). The established electrochemical method demonstrated a high tolerance level to Cl- ions where 1.0 M Cl- exhibited a negligible influence. The sensor was employed for detecting the COD in diverse real water samples and the attained results were validated using the standard dichromate method. The obtained results could open the window toward using simple and cost effective tools in order to monitor the water quality.

Fabrication, DFT Calculation, and Molecular Docking of Two Fe(III) Imine Chelates as Anti-COVID-19 and Pharmaceutical Drug Candidate.

Two tetradentate dibasic chelating Schiff base iron (III) chelates were prepared from the reaction of 2,2'-((1E,1'E)-(1,2-phenylenebis(azanylylidene))bis(methanylylidene))bis(4-bromophenol) (PDBS) and 2,2'-((1E,1'E)-((4-chloro-1,2-phenylene)bis(azanylylidene))-bis(methanylylidene))bis(4-bromophenol) (CPBS) with Fe3+ ions. The prepared complexes were fully characterized with spectral and physicochemical tools such as IR, NMR, CHN analysis, TGA, UV-visible spectra, and magnetic moment measurements. Moreover, geometry optimizations for the synthesized ligands and complexes were conducted using the Gaussian09 program through the DFT approach, to find the best structures and key parameters. The prepared compounds were tested as antimicrobial agents against selected strains of bacteria and fungi. The results suggests that the CPBSFe complex has the highest activity, which is close to the reference. An MTT assay was used to screen the newly synthesized compounds against a variety of cell lines, including colon cancer cells, hepatic cellular carcinoma cells, and breast carcinoma cells. The results are expressed by IC50 value, in which the 48 µg/mL value of the CPBSFe complex indicates its success as a potential anticancer agent. The antioxidant behavior of the two imine chelates was studied by DPPH assay. All the tested imine complexes show potent antioxidant activity compared to the standard Vitamin C. Furthermore, the in vitro assay and the mechanism of binding and interaction efficiency of the tested samples with the receptor of COVID-19 core protease viral protein (PDB ID: 6lu7) and the receptor of Gram-negative bacteria (Escherichia coli, PDB ID: 1fj4) were investigated using molecular docking experiments.

Synthesis, DFT Calculations, Antiproliferative, Bactericidal Activity and Molecular Docking of Novel Mixed-Ligand Salen/8-Hydroxyquinoline Metal Complexes.

Despite the common use of salens and hydroxyquinolines as therapeutic and bioactive agents, their metal complexes are still under development. Here, we report the synthesis of novel mixed-ligand metal complexes (MSQ) comprising salen (S), derived from (2,2'-{1,2-ethanediylbis[nitrilo(E) methylylidene]}diphenol, and 8-hydroxyquinoline (Q) with Co(II), Ni(II), Cd(II), Al(III), and La(III). The structures and properties of these MSQ metal complexes were investigated using molar conductivity, melting point, FTIR, 1H NMR, 13C NMR, UV-VIS, mass spectra, and thermal analysis. Quantum calculation, analytical, and experimental measurements seem to suggest the proposed structure of the compounds and its uncommon monobasic tridentate binding mode of salen via phenolic oxygen, azomethine group, and the NH group. The general molecular formula of MSQ metal complexes is [M(S)(Q)(H2O)] for M (II) = Co, Ni, and Cd or [M(S)(Q)(Cl)] and [M(S)(Q)(H2O)]Cl for M(III) = La and Al, respectively. Importantly, all prepared metal complexes were evaluated for their antimicrobial and anticancer activities. The metal complexes exhibited high cytotoxic potency against human breast cancer (MDA-MB231) and liver cancer (Hep-G2) cell lines. Among all MSQ metal complexes, CoSQ and LaSQ produced IC50 values (1.49 and 1.95 µM, respectively) that were comparable to that of cisplatin (1.55 µM) against Hep-G2 cells, whereas CdSQ and LaSQ had best potency against MDA-MB231 with IC50 values of 1.95 and 1.43 µM, respectively. Furthermore, the metal complexes exhibited significant antimicrobial activities against a wide spectrum of both Gram-positive and -negative bacterial and fungal strains. The antibacterial and antifungal efficacies for the MSQ metal complexes, the free S and Q ligands, and the standard drugs gentamycin and ketoconazole decreased in the order AlSQ > LaSQ > CdSQ > gentamycin > NiSQ > CoSQ > Q > S for antibacterial activity, and for antifungal activity followed the trend of LaSQ > AlSQ > CdSQ > ketoconazole > NiSQ > CoSQ > Q > S. Molecular docking studies were performed to investigate the binding of the synthesized compounds with breast cancer oxidoreductase (PDB ID: 3HB5). According to the data obtained, the most probable coordination geometry is octahedral for all the metal complexes. The molecular and electronic structures of the metal complexes were optimized theoretically, and their quantum chemical parameters were calculated. PXRD results for the Cd(II) and La(III) metal complexes indicated that they were crystalline in nature.

Sustainable waste management and recycling of Zn-Al layered double hydroxide after adsorption of levofloxacin as a safe anti-inflammatory nanomaterial.

Inorganic nano-layered double hydroxide (LDH) materials are used in the catalytic field, and have demonstrated great applicability in the pharmacological fields. In the current study, we report Zn-Al LDH as an adsorbent for levofloxacin (levo). The physical and chemical properties of the prepared material before and after adsorption were monitored using X-ray diffraction, Fourier-transform infrared (FT-IR) spectroscopic analysis, energy dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET) surface area measurements, high-resolution transmission electron microscopy (HRTEM), and field emission scanning electron microscopy (FESEM). Density functional theory (DFT) calculations for levo and its protonated species were studied at the B3LYP/6-311G (d,p) level of theory. The removal percentage of levo was 73.5%. The adsorption isotherm was investigated using nine different models at pH 9, where the obtained correlation coefficients (R 2) using the Redlich-Peterson and Toth models were 0.977. The thermodynamic parameters ΔS°, ΔG° and ΔH° were estimated and discussed in detail. Also, to support the adsorption research field, the applicability of the formed waste after the adsorption of levo onto Zn-Al LDH was investigated for medical purposes. The toxicity of levo in both normal and nanocomposite form was studied. Neither toxicological symptoms nor harmless effects were exhibited throughout the in vivo study. The oral anti-inflammatory activity, tested using 6% formalin to produce edema in the footpad, was manifested as a significant increase of 37% in the anti-inflammatory effect of the Zn-Al LDH/levo nanocomposite compared to levo in its normal form.

Correction: Sustainable waste management and recycling of Zn-Al layered double hydroxide after adsorption of levofloxacin as a safe anti-inflammatory nanomaterial.

[This corrects the article DOI: 10.1039/D0RA04898D.].

Synthesis and characterization of new Cr(III), Fe(III) and Cu(II) complexes incorporating multi-substituted aryl imidazole ligand: Structural, DFT, DNA binding, and biological implications.

Designing new metal-based molecular antibiotics is an efficient approach to overcome the growing threat of antimicrobial resistance. In this paper, novel Cr(III), Fe(III) and Cu(II) complexes comprising substituted aryl imidazole ligand (MSEB), namely (2-(1-(2-hydroxyethyl)-4,5-diphenyl-1H-imidazole-2-yl)(4-bromophenol)) have been synthesized and characterized using infra-red (IR), ultraviolet-visible (UV-Vis) and 1H, 13C NMR spectroscopic techniques, together with elemental (CHN) and thermogravimetric analyses, molar conductance, and magnetic susceptibility measurements. The combined results along with the DFT calculations revealed a 1:1 (M: L) stoichiometric ratio and the complexes adopted distorted-octahedral geometries to afford [Cr(MSEB)Cl2(H2O)2], [Fe(MSEB)(NO3)2(H2O)2] and [Cu(MSEB)Cl(H2O)3] respectively. Biological studies showed that all complexes exhibited powerful antimicrobial activity against various strains of bacteria and fungi, S. aureus (+ve), E. coli (-ve) and P. aeruginosa (-ve) bacteria and T. Rubrum, C. albicans, and A. flavus fungi. Moreover, the three metal-complexes showed high in vitro cytotoxicity against Colon (HCT-116), Breast (MCF-7), and hepatic cellular (HepG-2) carcinoma cell lines, with MSEBCu complex being the most cytotoxic one. Finally the binding interactions of the complexes with CT-DNA were explored using UV-Vis spectroscopy, viscosity and gel electrophoreses measurements.

Thermodynamic Investigation and Mixed Ligand Complex Formation of 1,4-Bis-(3-aminopropyl)-piperazine and Biorelevant Ligands.

Thermodynamic parameters for protonation of 1,4-bis(3-aminopropyl)-piperazine (BAPP) and its metal complexation with some divalent metal ions were determined in aqueous solution at constant ionic strength (0.1 M NaNO(3)) using a potentiometric technique. The order of -ΔG(0) and -ΔH(0) was found to obey Co(2+) < Ni(2+) < Cu(2+) > Zn(2+), in accordance with the Irving-Williams order. The formation equilibria of zinc (II) complexes and the ternary complexes Zn(BAPP)L, where L = amino acid, amides, or DNA constituents), have been investigated. Ternary complexes are formed by a simultaneous mechanism. The concentration distribution of the complexes in solution was evaluated as a function of pH. Stoichiometry and stability constants for the complexes formed are reported and discussed. The stability of ternary complexes was quantitatively compared with their corresponding binary complexes in terms of the parameter Δlog K.

Synthesis, characterization, equilibrium study and biological activity of Cu(II), Ni(II) and Co(II) complexes of polydentate Schiff base ligand.

Schiff base ligand, 1,4-bis[(2-hydroxybenzaldehyde)propyl]piperazine (BHPP), and its Cu(II), Ni(II) and Co(II) metal complexes were synthesized and characterized by elemental analysis, magnetic susceptibility, molar conductance and spectral (IR and UV-vis) studies. The ground state of BHPP ligand was investigated using the BUILDER module of MOE. Metal complexes are formed in the 1:1 (M:L) ratio as found from the elemental analysis and found to have the general formula [ML]·nH(2)O, where M=Co(II), Ni(II) and Cu(II), L=BHPP. In all the studied complexes, the (BHPP) ligand behaves as a hexadentate divalent anion with coordination involving the two azomethine nitrogen's, the two nitrogen atoms of piperazine ring and the two deprotonated phenolic OH-groups. The magnetic and spectral data indicates octahedral geometry of metal(II) complexes. The ligand and their metal chelates have been screened for their antimicrobial activities using the disc diffusion method against the selected bacteria and fungi. They were found to be more active against Gram-positive than Gram-negative bacteria. Protonation constants of (BHPP) ligand and stability constants of its Cu(2+), Co(2+) and Ni(2+) complexes were determined by potentiometric titration method in 50% DMSO-water solution at ionic strength of 0.1 M sodium nitrate. It has been observed that the protonated Schiff base ligand (BHPP) have four protonation constants. The divalent metal ions Cu(2+), Ni(2+) and Co(2+) form 1:1 complexes.

Synthesis and structural characterization of Pd(N,N-dimethylaminopropylamine)Cl2 complex--the interaction with bio-relevant ligands with reference to the effect of cysteine on the deactivation of metal-based drug.

The synthesis and X-ray structural characterization of Pd(DMPA)Cl(2) complex, where DMPA=N,N-dimethylaminopropylamine, is reported. The complex crystallizes in the space group P2(1)/c, a=8.8923(4), b=10.9050(5), c=11.5006(7) Å, ß=120.00(18)°, V=948.25(8) Å(3), Z=4. The palladium centre has a typical square-planar geometry with a tetrahedral distortion. Stoichiometry and stability constants of the complexes formed between [Pd(DMPA)(H(2)O)(2)](2+) and some selected DNA constituents and cytsteine are investigated at 25 °C and at constant 0.1M ionic strength. The concentration distribution diagrams of the various species formed are evaluated. The equilibrium constants for the displacement of coordinated ligands as inosine by cysteine are calculated. The results are expected to contribute to the chemistry of tumour therapy.

Thermodynamics of the interaction of Pd(dmen)(H2O)2²âº with bio-relevant ligands with reference to the deactivation of metal-based drug by thiol ligands.

Pd(dmen)Cl(2) complex was synthesized and characterized, where dmen=N,N-dimethylethylenediamine. Stoichiometry and stability constants of the complexes formed between [Pd(dmen)(H(2)O)(2)](2+) and various biologically relevant ligands such as amino acids, peptides and dicarboxylic acids are investigated at 25 °C and at constant 0.1M ionic strength. The concentration distribution diagrams of the various species formed are evaluated. The equilibrium constants for the displacement of coordinated ligands as inosine, glycine or methionine by cysteine are calculated. The results are expected to contribute to the chemistry of tumour therapy.

Speciation studies on the complex formation reactions of [Pd(N,N-diethyl-ethylendiamine)(H2O)2]2+ with some bio-relevant ligands and displacement reaction by mercaptoethylamine.

Pd(deen)Cl2 and Pd(deen)(CBDCA) complexes, where deen=N,N-diethylethylenediamine and CBDCA=1,1-cyclobutanedicarboxylate, were synthesized and characterized by elemental analysis and spectroscopic techniques. The stoichiometry and stability of the complexes formed between various biologically relevant ligands (amino acids, peptides, DNA constituents and dicarboxylic acids) and [Pd(deen)(H2O)2]2+ were investigated at 25 °C and 0.1 M ionic strength. The speciation diagrams of the complexes formed in solutions are evaluated. The mode of coordination of glycylglycine is investigated by spectrophotometric measurements. The equilibrium constants for the displacement of coordinated ligands as inosine, glycine or methionine by mercaptoethylamine are calculated. The results are expected to contribute to the chemistry of antitumour agents.

Complex-formation reactions of dicholoro(S-methyl-L-cysteine)palladium(II) with bio-relevant ligands. Labilization induced by S-donor chelates.

The complex-formation equilibria of [Pd(SMC)(H2O)2]+, where SMC = S-methyl-l-cysteinate, with bio-relevant ligands such as amino acids, peptides, dicarboxylic acids and DNA constituents were studied and their formation constants were determined. The binding mode of the ligands containing various functional groups was studied and the speciation diagrams were evaluated. The kinetics of base hydrolysis of amino acid esters bound to [Pd(SMC)(H2O)2]+ was studied in aqueous solution at 25 degrees C and 0.1 M ionic strength. The effect of solvent polarity and temperature on the hydrolysis of coordinated glycine methyl ester was investigated. The activation parameters are evaluated and discussed.