Ultralow-Noise MoS2/Type II Superlattice Mixed-Dimensional van der Waals Barrier Long-Wave Infrared Detector.

Low-noise, high-performance long-wave infrared detectors play a crucial role in diverse applications, including in the industrial, security, and medical fields. However, the current performance of long-wave detectors is constrained by the noise associated with narrow bandgaps. Therefore, exploring novel heterostructures for long-wavelength infrared detection is advantageous for the development of compact and high-performance infrared sensing. In this investigation, we present a MoS2/type II superlattice mixed-dimensional van der Waals barrier long-wave infrared detector (Mixed-vdWH). Through the design of the valence band barrier, substantial suppression of device dark noise is achieved, resulting in 2 orders of magnitude reduction in dark current. The device exhibits outstanding performance, with D* reaching 4 × 1010 Jones. This integration approach synergizes the distinctive properties of two-dimensional layered materials (2DLM) with the well-established processing techniques of traditional three-dimensional semiconductor materials, offering a compelling avenue for the large-scale integration of 2DLM.

Bionic visual-audio photodetectors with in-sensor perception and preprocessing.

Serving as the "eyes" and "ears" of the Internet of Things, optical and acoustic sensors are the fundamental components in hardware systems. Nowadays, mainstream hardware systems, often comprising numerous discrete sensors, conversion modules, and processing units, tend to result in complex architectures that are less efficient compared to human sensory pathways. Here, a visual-audio photodetector inspired by the human perception system is proposed to enable all-in-one visual and acoustic signal detection with computing capability. This device not only captures light but also optically records sound waves, thus achieving "watching" and "listening" within a single unit. The gate-tunable positive, negative, and zero photoresponses lead to highly programmable responsivities. This programmability enables the execution of diverse functions, including visual feature extraction, object classification, and sound wave manipulation. These results showcase the potential of expanding perception approaches in neuromorphic devices, opening up new possibilities to craft intelligent and compact hardware systems.

The Electrical Behaviors of Grain Boundaries in Polycrystalline Optoelectronic Materials.

Polycrystalline optoelectronic materials are widely used for photoelectric signal conversion and energy harvesting and play an irreplaceable role in the semiconductor field. As an important factor in determining the optoelectronic properties of polycrystalline materials, grain boundaries (GBs) are the focus of research. Particular emphases are placed on the generation and height of GB barriers, how carriers move at GBs, whether GBs act as carrier transport channels or recombination sites, and how to change the device performance by altering the electrical behaviors of GBs. This review introduces the evolution of GB theory and experimental observation history, classifies GB electrical behaviors from the perspective of carrier dynamics, and summarizes carrier transport state under external conditions such as bias and illumination and the related band bending. Then the carrier scattering at GBs and the electrical differences between GBs and twin boundaries are discussed. Last, the review describes how the electrical behaviors of GBs can be influenced and modified by treatments such as passivation or by consciously adjusting the distribution of grain boundary elements. By studying the carrier dynamics and the relevant electrical behaviors of GBs in polycrystalline materials, researchers can develop optoelectronics with higher performance.

Graphene nanowalls in photodetectors.

Graphene nanowalls (GNWs) have emerged as a promising material in the field of photodetection, thanks to their exceptional optical, electrical, mechanical, and thermodynamic properties. However, the lack of a comprehensive review in this domain hinders the understanding of GNWs' development and potential applications. This review aims to provide a systematic summary and analysis of the current research status and challenges in GNW-based photodetectors. We begin by outlining the growth mechanisms and methods of GNWs, followed by a discussion on their physical properties. Next, we categorize and analyze the latest research progress in GNW photodetectors, focusing on photovoltaic, photoconductive, and photothermal detectors. Lastly, we offer a summary and outlook, identifying potential challenges and outlining industry development directions. This review serves as a valuable reference for researchers and industry professionals in understanding and exploring the opportunities of GNW materials in photodetection.

Polarity-Tunable Field Effect Phototransistors.

Field-effect phototransistors feature gate voltage modulation, allowing dynamic performance control and significant signal amplification. A field-effect phototransistor can be designed to be inherently either unipolar or ambipolar in its response. However, conventionally, once a field-effect phototransistor has been fabricated, its polarity cannot be changed. Herein, a polarity-tunable field-effect phototransistor based on a graphene/ultrathin Al2O3/Si structure is demonstrated. Light can modulate the gating effect of the device and change the transfer characteristic curve from unipolar to ambipolar. This photoswitching in turn produces a significantly improved photocurrent signal. The introduction of an ultrathin Al2O3 interlayer also enables the phototransistor to achieve a responsivity in excess of 105 A/W, a 3 dB bandwidth of 100 kHz, a gain-bandwidth product of 9.14 × 1010 s-1, and a specific detectivity of 1.91 × 1013 Jones. This device architecture enables the gain-bandwidth trade-off in current field-effect phototransistors to be overcome, demonstrating the feasibility of simultaneous high-gain and fast-response photodetection.

Miniaturized infrared spectrometer based on the tunable graphene plasmonic filter.

Miniaturization of a conventional spectrometer is challenging because of the tradeoffs of size, cost, signal-to-noise ratio, and spectral resolution, etc. Here, a new type of miniaturized infrared spectrometer based on the integration of tunable graphene plasmonic filters and infrared detectors is proposed. The transmittance spectrum of a graphene plasmonic filter can be tuned by varying the Fermi energy of the graphene, allowing light incident on the graphene plasmonic filter to be dynamically modulated in a way that encodes its spectral information in the receiving infrared detector. The incident spectrum can then be reconstructed by using decoding algorithms such as ridge regression and neural networks. The factors that influence spectrometer performance are investigated in detail. It is found that the graphene carrier mobility and the signal-to-noise ratio are two key parameters in determining the resolution and precision of the spectrum reconstruction. The mechanism behind our observations can be well understood in the framework of the Wiener deconvolution theory. Moreover, a hybrid decoding (or recovery) algorithm that combines ridge regression and a neural network is proposed that demonstrates a better spectral recovery performance than either the ridge regression or a deep neural network alone, being able to achieve a sub-hundred nanometer spectral resolution across the 8∼14 µm wavelength range. The size of the proposed spectrometer is comparable to a microchip and has the potential to be integrated within portable devices for infrared spectral imaging applications.

Gradual funnel photon trapping enhanced InAs/GaSb type-II superlattice infrared detector.

InAs/GaSb type-II superlattice materials have attracted in the field of infrared detection due to their high quality, uniformity and stability. The performance of InAs/GaSb type-II superlattice detector is limited by dark noise and light response. This work reports a gradual funnel photon trapping (GFPT) structure enabling the light trapping in the T2SL detector absorption area. The GFPT detector exhibits an efficient broadband responsivity enhancement of 30% and a darker current noise reduction of 3 times. It has excellent passivated by atomic layer deposition and achieves a high detectivity of 1.51 × 1011 cm Hz1/2 at 78 K.

Ultrahigh Photogain Short-Wave Infrared Detectors Enabled by Integrating Graphene and Hyperdoped Silicon.

Highly sensitive short-wave infrared (SWIR) detectors, compatible with the silicon-based complementary metal oxide semiconductor (CMOS) process, are regarded as the key enabling components in the miniaturized system for weak signal detection. To date, the high photogain devices are greatly limited by a large bias voltage, low-temperature refrigeration, narrow response band, and complex fabrication processes. Here, we demonstrate high photogain detectors working in the SWIR region at room temperature, which use graphene for charge transport and Te-hyperdoped silicon (Te-Si) for infrared absorption. The prolonged lifetime of carriers, combined with the built-in potential generated at the interface between the graphene and the Te-Si, leads to an ultrahigh photogain of 109 at room temperature (300 K) for 1.55 µm light. The gain can be improved to 1012, accompanied by a noise equivalent power (NEP) of 0.08 pW Hz-1/2 at 80 K. Moreover, the proposed device exhibits a NEP of 4.36 pW Hz-1/2 at 300 K at the wavelength of 2.7 µm, which is exceeding the working region of InGaAs detectors. This research shows that graphene can be used as an efficient platform for silicon-based SWIR detection and provides a strategy for the low-power, uncooled, high-gain infrared detectors compatible with the CMOS process.

Single-crystal two-dimensional material epitaxy on tailored non-single-crystal substrates.

The use of single-crystal substrates as templates for the epitaxial growth of single-crystal overlayers has been a primary principle of materials epitaxy for more than 70 years. Here we report our finding that, though counterintuitive, single-crystal 2D materials can be epitaxially grown on twinned crystals. By establishing a geometric principle to describe 2D materials alignment on high-index surfaces, we show that 2D material islands grown on the two sides of a twin boundary can be well aligned. To validate this prediction, wafer-scale Cu foils with abundant twin boundaries were synthesized, and on the surfaces of these polycrystalline Cu foils, we have successfully grown wafer-scale single-crystal graphene and hexagonal boron nitride films. In addition, to greatly increasing the availability of large area high-quality 2D single crystals, our discovery also extends the fundamental understanding of materials epitaxy.

A Fullerene-Platinum Complex for Direct Functional Patterning of Single Metal Atom-Embedded Carbon Nanostructures.

The development of patterning materials ("resists") at the nanoscale involves two distinct trends: one is toward high sensitivity and resolution for miniaturization, the other aims at functionalization of the resists to realize bottom-up construction of distinct nanoarchitectures. Patterning of carbon nanostructures, a seemingly ideal application for organic functional resists, has been highly reliant on complicated pattern transfer processes because of a lack of patternable precursors. Herein, we present a fullerene-metal coordination complex as a fabrication material for direct functional patterning of sub-10 nm metal-containing carbon structures. The attachment of one platinum atom per fullerene molecule not only leads to significant improvement of sensitivity and resolution but also enables stable atomic dispersion of the platinum ions within the carbon matrix, which may gain fundamentally new interest in functional patterning of hierarchical carbon nanostructures.

Enhanced Photogating Effect in Graphene Photodetectors via Potential Fluctuation Engineering.

The photogating effect in hybrid structures has manifested itself as a reliable and promising approach for photodetectors with ultrahigh responsivity. A crucial factor of the photogating effect is the built-in potential at the interface, which controls the separation and harvesting of photogenerated carriers. So far, the primary efforts of designing the built-in potential rely on discovering different materials and developing multilayer structures, which may raise problems in the compatibility with the standard semiconductor production line. Here, we report an enhanced photogating effect in a monolayer graphene photodetector based on a structured substrate, where the built-in potential is established by the mechanism of potential fluctuation engineering. We find that the enhancement factor of device responsivity is related to a newly defined parameter, namely, fluctuation period rate (Pf). Compared to the device without a nanostructured substrate, the responsivity of the device with an optimized Pf is enhanced by 100 times, reaching a responsivity of 240 A/W and a specific detectivity, D*, of 3.4 × 1012 Jones at 1550 nm wavelength and room temperature. Our experimental results are supported by both theoretical analysis and numerical simulation. Since our demonstration of the graphene photodetectors leverages the engineering of structures with monolayer graphene rather than materials with a multilayer complex structure. it should be universal and applicable to other hybrid photodetectors.

The Effect of Ethanol on Abnormal Grain Growth in Copper Foils.

Single-crystal Cu not only has high electrical and thermal conductivity, but can also be used as a promising platform for the epitaxial growth of two-dimensional materials. Preparing large-area single-crystal Cu foils from polycrystalline foils has emerged as the most promising technique in terms of its simplicity and effectiveness. However, the studies on transforming polycrystalline foil into large-area single-crystal foil mainly focus on the influence of annealing temperature and strain energy on the recrystallization process of copper foil, while studies on the effect of annealing atmosphere on abnormal grain growth behavior are relatively rare. It is necessary to carry out more studies on the effect of annealing atmosphere on grain growth behavior to understand the recrystallization mechanism of metal. Here, we found that introduction of ethanol in pure argon annealing atmosphere will cause the abnormal grain growth of copper foil. Moreover, the number of abnormally grown grains can be controlled by the concentration of ethanol in the annealing atmosphere. Using this technology, the number of abnormally grown grains on the copper foil can be controlled to single one. This abnormally grown grain will grow rapidly to decimeter-size by consuming the surrounding small grains. This work provides a new perspective for the understanding of the recrystallization of metals, and a new method for the preparation of large-area single-crystal copper foils.

Controllable Graphene Wrinkle for a High-Performance Flexible Pressure Sensor.

Flexible pressure sensors have aroused tremendous attention, owing to their broad applications in healthcare, robotics, and prosthetics. So far, it remains a critical challenge to develop low-cost and controllable microstructures for flexible pressure sensors. Herein, a high-sensitivity and low-cost flexible piezoresistive sensor was developed by combining a controllable graphene-nanowalls (GNWs) wrinkle and a polydimethylsiloxane (PDMS) elastomer. For the GNWs-PDMS bilayer, the vertically grown GNWs film can effectively improve the interface strength and form delamination-free conformal wrinkles. More importantly, a controllable microstructure can be easily tuned through the thermal wrinkling method. The wrinkled graphene-nanowalls (WG) piezoresistive sensor has a high sensitivity (S = 59.0 kPa-1 for the 0-2 kPa region and S = 4.8 kPa-1 for the 2-20 kPa region), a fast response speed (<6.9 ms), and a low limit of detection (LOD) of 2 mg (∼0.2 Pa). The finite element method was used to analyze the working mechanism of the sensor, which revealed that the periods of the wrinkles play a dominant role in the performances of the sensors. These prominent merits enable wrinkled graphene sensors to successfully detect various signals from a weak stimulus to large pressures, for example, the detection of weak gas and plantar pressure. Furthermore, object manipulation, tactile imaging, and braille recognition applications have been demonstrated, showing their great potential in prosthetics limbs and intelligent robotics.

Interface Engineering of a Silicon/Graphene Heterojunction Photodetector via a Diamond-Like Carbon Interlayer.

Silicon/graphene nanowalls (Si/GNWs) heterojunctions with excellent integrability and sensitivity show an increasing potential in optoelectronic devices. However, the performance is greatly limited by inferior interfacial adhesion and week electronic transport caused by the horizontal buffer layer. Herein, a diamond-like carbon (DLC) interlayer is first introduced to construct Si/DLC/GNWs heterojunctions, which can significantly change the growth behavior of the GNWs film, avoiding the formation of horizontal buffer layers. Accordingly, a robust diamond-like covalent bond with a remarkable enhancement of the interfacial adhesion is yielded, which notably improves the complementary metal oxide semiconductor compatibility for photodetector fabrication. Importantly, the DLC interlayer is verified to undergo a graphitization transition during the high-temperature growth process, which is beneficial to pave a vertical conductive path and facilitate the transport of photogenerated carriers in the visible and near-infrared regions. As a result, the Si/DLC/GNWs heterojunction detectors can simultaneously exhibit improved photoresponsivity and response speed, compared with the counterparts without DLC interlayers. The introduction of the DLC interlayer might provide a universal strategy to construct hybrid interfaces with high performance in next-generation optoelectronic devices.

Batch production of uniform graphene films via controlling gas-phase dynamics in confined space.

Batch production of continuous and uniform graphene films is critical for the application of graphene. Chemical vapor deposition (CVD) has shown great promise for mass producing high-quality graphene films. However, the critical factors affected the uniformity of graphene films during the batch production need to be further studied. Herein, we propose a method for batch production of uniform graphene films by controlling the gaseous carbon source to be uniformly distributed near the substrate surface. By designing the growth space of graphene into a rectangular channel structure, we adjusted the velocity of feedstock gas flow to be uniformly distributed in the channel, which is critical for uniform graphene growth. The monolayer graphene film grown inside the rectangular channel structure shows high uniformity with average sheet resistance of 345 Ω sq-1 without doping. The experimental and simulation results show that the placement of the substrates during batch growth of graphene films will greatly affect the distribution of gas-phase dynamics near the substrate surface and the growth process of graphene. Uniform graphene films with large-scale can be prepared in batches by adjusting the distribution of gas-phase dynamics.

Electrically tunable graphene metamaterial with strong broadband absorption.

The coupling system with dynamic manipulation characteristics is of great importance for the field of active plasmonics and tunable metamaterials. However, the traditional metal-based architectures suffer from a lack of electrical tunability. In this study, a metamaterial composed of perpendicular or parallel graphene-Al2O3-graphene stacks is proposed and demonstrated, which allows for the electric modulation of both graphene layers simultaneously. The resultant absorption of hybridized modes can be modulated to more than 50% by applying an external voltage, and the absorption bandwidth can reach 3.55 µm, which is 1.7 times enhanced than the counterpart of single-layer graphene. The modeling results demonstrate that the small relaxation time of graphene is of great importance to realize the broadband absorption. Moreover, the optical behaviors of the tunable metamaterial can be influenced by the incident polarization, the dielectric thickness, and especially by the Fermi energy of graphene. This work is of a crucial role in the design and fabrication of graphene-based broadband optical and optoelectronic devices.

Measurement of Chiral Molecular Parameters Based on a Combination of Surface Plasmon Resonance and Weak Value Amplification.

A novel combination of surface plasmon resonance (SPR) and weak value amplification (WVA) is employed to measure the optical rotation angle and refractive index of chiral enantiomers such as sugars and amino acids. An extremely low optical rotation change (2.73 × 10-4 rad) is readily measurable, with a resolution of 6.75 × 10-7 rad, 1 order of magnitude higher than that obtained using weak value amplification with intensity modulation, and a refractive index change of 1.13 × 10-6 RIU is also detected, with a resolution of 1.99 × 10-9 RIU, a nearly 1-order-of-magnitude increase in sensitivity over weak measurement based on a Mach-Zehnder interferometer. The optical activity and refractive index changes of chiral molecules are determined in real time by measurements of the output light intensity variation, whereby the absolute configuration of the chiral molecule is identified through the relation between intensity and molecular orientation. The SPR-WVA combination sensing scheme fills the gap of capability for detecting the optical activity of a molecular solution, which has not been possible with conventional SPR alone.

Impact of the pitch angle on the spin Hall effect of light weak measurement.

The spin Hall effect of light (SHEL), as a photonic analogue of the spin Hall effect, has been widely studied for manipulating spin-polarized photons and precision metrology. In this work, a physical model is established to reveal the impact of the interface pitch angle on the SHEL accompanied by the Imbert-Fedorov angular shift simultaneously. Then, a modified weak measurement technique is proposed in this case to amplify the spin shift experimentally, and the results agree well with the theoretical prediction. Interestingly, the amplified transverse shift is quite sensitive to the variation of the interface pitch angle, and the performance provides a simple and effective method for precise pitch angle sensing with a minimum observable angle of 6.6 × 10-5°.

Enhancement of the Photoresponse of Monolayer MoS2 Photodetectors Induced by a Nanoparticle Grating.

Photodetectors based on two-dimensional (2D) materials such as monolayer MoS2 are attractive because they can be directly integrated into the current metal-oxide semiconductor (CMOS) structures. Unfortunately, such devices suffer from low responsivity due to low absorption by the monolayer MoS2. Combining MoS2 with plasmonic nanostructures is an alternative solution for enhancing the absorption of the 2D semiconductor, and this can drastically increase the photoresponsivity of the corresponding photodetector. Herein, a device incorporating a grating-patterned nanoparticle structure is fabricated using traditional photolithography together with an annealing step. We demonstrate that this new structure leads to a strong enhancement in the photocurrent due to the coupling of the MoS2 to localized surface plasmons in the nanoparticle grating. Compared to a simple Au nanoparticle array, the nanoparticle grating structure generates a 100% increase in optical absorption. Thus, under 532 nm illumination, the composite nanoparticle grating/monolayer MoS2 integrated photodetector shows a 111-fold increase in the photocurrent compared to the same device in the absence of nanoparticles. The gateless responsivity can be up to 38.57 A/W and a specific detectivity of 9.89 × 109 Jones is realized. Moreover, photothermal flux derivations indicate that, in addition to the expected increase due to light-generated carrier multiplication, the thermal effects of plasmons provide a significant contribution to the photocurrent enhancement.

Microwave plasma assisted reduction synthesis of hexagonal cobalt nanosheets with enhanced electromagnetic performances.

In this study, we employed a microwave plasma assisted reduction (MPAR) method to prepare metallic nanoparticles with desirable morphology. Compared with the hydrogen thermal reduction technique, the MPAR technique could greatly maintain the original morphology of self-sacrificing precursors, as well as proving to be highly efficient, energy-saving and pollution-free. Taking ferromagnetic metallic Co as a forerunner, Co nanosheets with inerratic hexagonal morphology were successfully synthesized on a large scale uniformly. The lateral dimension of the achieved Co nanosheets is in the range of 3∼5 µm with tens of nanometers in thickness. The intact hexagonal flaky shape of Co nanosheets is beneficial for improving dielectric loss by increasing electric channels and interfacial polarization. Consequently, the minimum reflection loss could reach up to -71 dB at a thin thickness of 1.2 mm. Furthermore, the effective bandwidth (RL < -10 dB) could be achieved in a wide range of 2.8∼18 GHz by integrating the thickness from 5.0∼1.0 mm, which provides the possibility for applications in electromagnetic shielding and radar stealth fields. It is believed that the MPAR technique is suitable for designing and preparing novel microwave absorbers on the basis of appropriate precursors, providing new opportunities to acquire high-performance microwave absorbers in the future.