Engineering Interlayer Electron-Phonon Coupling in WS2/BN Heterostructures.

In van der Waals (vdW) heterostructures, the interlayer electron-phonon coupling (EPC) provides one unique channel to nonlocally engineer these elementary particles. However, limited by the stringent occurrence conditions, the efficient engineering of interlayer EPC remains elusive. Here we report a multitier engineering of interlayer EPC in WS2/boron nitride (BN) heterostructures, including isotope enrichments of BN substrates, temperature, and high-pressure tuning. The hyperfine isotope dependence of Raman intensities was unambiguously revealed. In combination with theoretical calculations, we anticipate that WS2/BN supercells could induce Brillouin-zone-folded phonons that contribute to the interlayer coupling, leading to a complex nature of broad Raman peaks. We further demonstrate the significance of a previously unexplored parameter, the interlayer spacing. By varying the temperature and high pressure, we effectively manipulated the strengths of EPC with on/off capabilities, indicating critical thresholds of the layer-layer spacing for activating and strengthening interlayer EPC. Our findings provide new opportunities to engineer vdW heterostructures with controlled interlayer coupling.

Air-Stable Monolayer Cu2 Se Exhibits a Purely Thermal Structural Phase Transition.

Materials possessing structural phase transformations exhibit a rich set of physical and chemical properties that can be used for a variety of applications. In 2D materials, structural transformations have so far been induced by strain, lasers, electron injection, electron/ion beams, thermal loss of stoichiometry, and chemical treatments or by a combination of such approaches and annealing. However, stoichiometry-preserving, purely thermal, reversible phase transitions, which are fundamental in physics and can be easily induced, have not been observed. Here, the fabrication of monolayer Cu2 Se, a new 2D material is reported, demonstrating the existence of a purely thermal structural phase transition. Scanning tunneling microscopy, scanning transmission electron microscopy, and density functional theory (DFT) identify two structural phases at 78 and 300 K. DFT calculations trace the phase-transition mechanism via the existence/absence of imaginary (unstable) phonon modes at low and high temperatures. In situ, variable-temperature low-energy electron diffraction patterns demonstrate that the phase transition occurs across the whole sample at ≈147 K. Angle-resolved photoemission spectra and DFT calculations show that a degeneracy at the Γ point of the energy bands of the high-temperature phase is lifted in the low-temperature phase. This work opens up possibilities for studying such phase transitions in 2D materials.

Observation of the Kondo Effect in Multilayer Single-Crystalline VTe2 Nanoplates.

We report the chemical vapor deposition (CVD) growth, characterization, and low-temperature magnetotransport of 1T phase multilayer single-crystalline VTe2 nanoplates. The transport studies reveal that no sign of intrinsic long-range ferromagnetism but localized magnetic moments exist in the individual multilayer metallic VTe2 nanoplates. The localized moments give rise to the Kondo effect, evidenced by logarithmical increment of resistivity with decreasing temperature and negative magnetoresistance (NMR) regardless of the direction of magnetic field at temperatures below the resistivity minimum. The low-temperature resistivity upturn is well described by the Hamann equation, and the NMR at different temperatures, a manifestation of the magnetization of the localized spins, is well fitted to a Brillouin function for S = 1/2. Density functional theory calculations reveal that the localized magnetic moments mainly come from the interstitial vanadium ions in the VTe2 nanoplates. Our results will shed light on the study of magnetic properties, strong correlation, and many-body physics in two-dimensional metallic transition metal dichalcogenides.

Plasmon-induced hot electron transfer in Au-ZnO heterogeneous nanorods for enhanced SERS.

Colloid-synthesized matchstick-shaped Au-ZnO heterogeneous nanorods are found to have the Zn ion terminated plane in the ZnO-Au interface without the formation of Au-O bonds based on the atomic-resolution observation of their interfacial structure and electronic states, which is greatly different from the other reported results. The Au-ZnO heterogeneous nanorods with a good expitaxial interface have shown a stronger surface-enhanced Raman scattering (SERS) signal of the dopamine molecules than Au nanoscale seeds alone, which is attributed to the enhanced charge transfer (CT) effect of ZnO which is greatly improved by the plasmon-induced hot electron from Au nanostructures. The enhanced CT effect has also been proved by a higher photocatalysis efficiency. Furthermore, the plasmon-induced hot electron transfer mechanism in Au-ZnO heterogeneous nanorods has been confirmed by a slow rise time of electrons in the transient absorption measurements. These findings suggest the dependency of the plasmon-induced hot electron transfer mechanism on the different mixing of the metal and semiconductor band levels.

Three-dimensional atomic-scale observation of structural evolution of cathode material in a working all-solid-state battery.

Most technologically important electrode materials for lithium-ion batteries are essentially lithium ions plus a transition-metal oxide framework. However, their atomic and electronic structure evolution during electrochemical cycling remains poorly understood. Here we report the in situ observation of the three-dimensional structural evolution of the transition-metal oxide framework in an all-solid-state battery. The in situ studies LiNi0.5Mn1.5O4 from various zone axes reveal the evolution of both atomic and electronic structures during delithiation, which is found due to the migration of oxygen and transition-metal ions. Ordered to disordered structural transition proceeds along the <100>, <110>, <111> directions and inhomogeneous structural evolution along the <112> direction. Uneven extraction of lithium ions leads to localized migration of transition-metal ions and formation of antiphase boundaries. Dislocations facilitate transition-metal ions migration as well. Theoretical calculations suggest that doping of lower valence-state cations effectively stabilize the structure during delithiation and inhibit the formation of boundaries.

Carbon nanofiber interlayer: a highly effective strategy to stabilize silicon anodes for use in lithium-ion batteries.

Silicon (Si) possesses the highest theoretical capacity as an anode material for lithium-ion batteries, and many efforts have been made to address the poor cycling stability issue that is associated with its huge volume changes during Li-Si alloying/de-alloying processes, mostly through the design of nanostructured materials. Herein, we report a simple cell configuration approach to improve the lithium storage performance of commercial nano-Si through the insertion of carbon nanofiber films (CNFs) as interlayers between the Si electrodes and separators. For this advanced cell configuration, commercial Si nanoparticle (Si NP) electrodes demonstrate a significantly improved reversible capacity (2700 mA h g-1 after 40 cycles at 50 mA g-1) and an ultralong cycle life (1250 mA h g-1 after 430 cycles at 1500 mA g-1). Even when cycled at 4 A g-1, the material still demonstrates a very high capacity of 870 mA h g-1. The excellent electrochemical performance of the Si NPs is attributed to the novel cell configuration. Macropores between the carbon nanofibers provide good access of the electrolyte to the Si NP electrodes. The 3D interconnected networks of the CNF interlayer not only decrease the internal charge transfer resistance and enhance the electron transport rate but also offer electron pathways along the CNF interlayer for cracked and disconnected Si NPs after cycling.

Temporary formation of highly conducting domain walls for non-destructive read-out of ferroelectric domain-wall resistance switching memories.

Erasable conductive domain walls in insulating ferroelectric thin films can be used for non-destructive electrical read-out of the polarization states in ferroelectric memories. Still, the domain-wall currents extracted by these devices have not yet reached the intensity and stability required to drive read-out circuits operating at high speeds. This study demonstrated non-destructive read-out of digital data stored using specific domain-wall configurations in epitaxial BiFeO3 thin films formed in mesa-geometry structures. Partially switched domains, which enable the formation of conductive walls during the read operation, spontaneously retract when the read voltage is removed, reducing the accumulation of mobile defects at the domain walls and potentially improving the device stability. Three-terminal memory devices produced 14 nA read currents at an operating voltage of 5 V, and operated up to T = 85 °C. The gap length can also be smaller than the film thickness, allowing the realization of ferroelectric memories with device dimensions far below 100 nm.

Wafer-Scale Growth and Transfer of Highly-Oriented Monolayer MoS2 Continuous Films.

Large scale epitaxial growth and transfer of monolayer MoS2 has attracted great attention in recent years. Here, we report the wafer-scale epitaxial growth of highly oriented continuous and uniform monolayer MoS2 films on single-crystalline sapphire wafers by chemical vapor deposition (CVD) method. The epitaxial film is of high quality and stitched by many 0°, 60° domains and 60°-domain boundaries. Moreover, such wafer-scale monolayer MoS2 films can be transferred and stacked by a simple stamp-transfer process, and the substrate is reusable for subsequent growth. Our progress would facilitate the scalable fabrication of various electronic, valleytronic, and optoelectronic devices for practical applications.

In Situ Atomic-Scale Observation of Electrochemical Delithiation Induced Structure Evolution of LiCoO2 Cathode in a Working All-Solid-State Battery.

We report a method for in situ atomic-scale observation of electrochemical delithiation in a working all-solid-state battery using a state-of-the-art chip based in situ transmission electron microscopy (TEM) holder and focused ion beam milling to prepare an all-solid-state lithium-ion battery sample. A battery consisting of LiCoO2 cathode, LLZO solid state electrolyte and gold anode was constructed, delithiated and observed in an aberration corrected scanning transmission electron microscope at atomic scale. We found that the pristine single crystal LiCoO2 became nanosized polycrystal connected by coherent twin boundaries and antiphase domain boundaries after high voltage delithiation. This is different from liquid electrolyte batteries, where a series of phase transitions take place at LiCoO2 cathode during delithiation. Both grain boundaries become more energy favorable along with extraction of lithium ions through theoretical calculation. We also proposed a lithium migration pathway before and after polycrystallization. This new methodology could stimulate atomic scale in situ scanning/TEM studies of battery materials and provide important mechanistic insight for designing better all-solid-state battery.

A room-temperature magnetic semiconductor from a ferromagnetic metallic glass.

Emerging for future spintronic/electronic applications, magnetic semiconductors have stimulated intense interest due to their promises for new functionalities and device concepts. So far, the so-called diluted magnetic semiconductors attract many attentions, yet it remains challenging to increase their Curie temperatures above room temperature, particularly those based on III-V semiconductors. In contrast to the concept of doping magnetic elements into conventional semiconductors to make diluted magnetic semiconductors, here we propose to oxidize originally ferromagnetic metals/alloys to form new species of magnetic semiconductors. We introduce oxygen into a ferromagnetic metallic glass to form a Co28.6Fe12.4Ta4.3B8.7O46 magnetic semiconductor with a Curie temperature above 600 K. The demonstration of p-n heterojunctions and electric field control of the room-temperature ferromagnetism in this material reflects its p-type semiconducting character, with a mobility of 0.1 cm2 V-1 s-1. Our findings may pave a new way to realize high Curie temperature magnetic semiconductors with unusual multifunctionalities.

FeS@C on Carbon Cloth as Flexible Electrode for Both Lithium and Sodium Storage.

Flexible and self-supported carbon-coated FeS on carbon cloth films (denoted as FeS@C/carbon cloth) is prepared by a facial hydrothermal method combined with a carbonization treatment. The FeS@C/carbon cloth could be directly used as electrodes for Li-ion batteries (LIBs) and sodium-ion batteries (NIBs). The synthetic effects of the structure, highly electron-conductive of carbon cloth, porous structure for electrolyte access, and uniform carbon shell on FeS surface to accommodate the volume change lead to improved cyclability and rate capability. For lithium storage, the FeS@C/carbon cloth electrode delivers a high discharge capacity of 420 mAh g(-1) even after 100 cycles at a current density of 0.15 C and 370 mAh g(-1)at a high current density of 7.5 C (1 C = 609 mA g(-1). When used for sodium storage, it keeps a reversible capacity of 365 mAh g(-1)after 100 cycles at 0.15 C. Similar process can be utilized for the formation of various cathode and anode composites on carbon cloth for flexible energy storage devices.

Longitudinal wave function control in single quantum dots with an applied magnetic field.

Controlling single-particle wave functions in single semiconductor quantum dots is in demand to implement solid-state quantum information processing and spintronics. Normally, particle wave functions can be tuned transversely by an perpendicular magnetic field. We report a longitudinal wave function control in single quantum dots with a magnetic field. For a pure InAs quantum dot with a shape of pyramid or truncated pyramid, the hole wave function always occupies the base because of the less confinement at base, which induces a permanent dipole oriented from base to apex. With applying magnetic field along the base-apex direction, the hole wave function shrinks in the base plane. Because of the linear changing of the confinement for hole wave function from base to apex, the center of effective mass moves up during shrinking process. Due to the uniform confine potential for electrons, the center of effective mass of electrons does not move much, which results in a permanent dipole moment change and an inverted electron-hole alignment along the magnetic field direction. Manipulating the wave function longitudinally not only provides an alternative way to control the charge distribution with magnetic field but also a new method to tune electron-hole interaction in single quantum dots.

A new non-destructive readout by using photo-recovered surface potential contrast.

Ferroelectric random access memory is still challenging in the feature of combination of room temperature stability, non-destructive readout and high intensity storage. As a non-contact and non-destructive information readout method, surface potential has never been paid enough attention because of the unavoidable decay of the surface potential contrast between oppositely polarized domains. That is mainly due to the recombination of the surface movable charges around the domain walls. Here, by introducing a laser beam into the combination of piezoresponse force microscopy and Kelvin probe force microscopy, we demonstrate that the surface potential contrast of BiFeO3 films can be recovered under light illumination. The recovering mechanism is understood based on the redistribution of the photo-induced charges driven by the internal electric field. Furthermore, we have created a 12-cell memory pattern based on BiFeO3 films to show the feasibility of such photo-assisted non-volatile and non-destructive readout of the ferroelectric memory.