ABSTRACT
A questionnaire survey and an event-related potential (ERP) experiment were used to reveal the impact of safety attitudes on risk perception. The results revealed that during hazard identification, the N130 amplitude of subjects with negative safety attitude was significantly higher, which implied that subjects with negative safety attitude were more likely to feel confused. During risk analysis, subjects with positive safety attitude were more inclined to overestimate the probability and damage degree of risks; subjects with positive safety attitudes displayed higher P150 and late positive potential amplitudes, which indicated that subjects with positive safety attitudes devoted more attention to risks in the early stage of risk analysis and had a more intense affective response in the later period. The risk judgment ability of subjects with positive safety attitude was affected by time pressure, and they exhibited higher risk judgment accuracy only under no time pressure.
Subject(s)
Evoked Potentials , Humans , Male , Female , Risk Assessment , Surveys and Questionnaires , Evoked Potentials/physiology , Attitude , Young Adult , Adult , Judgment , SafetyABSTRACT
CONTEXT: Papillary thyroid microcarcinoma (PTMC) is the most common type of thyroid cancer. It has been shown that lymph node metastasis is associated with poor prognosis in patients with PTMC. OBJECTIVE: We aim to characterize the PTMC transcriptome landscape and identify the candidate transcripts that are associated with lateral neck lymph node metastasis of PTMC. METHODS: We performed full-length transcriptome sequencing in 64 PTMC samples. Standard bioinformatic pipelines were applied to characterize and annotate the full-length expression profiles of 2 PTMC subtypes. Functional open reading frame (ORF) annotation of the known and novel transcripts were predicted by HMMER, DeepLoc, and DeepTMHMM tools. Candidate transcripts associated with the pN1b subtype were identified after transcript quantification and differential gene expression analyses. RESULTS: We found that skipping exons accounted for the more than 27.82% of the alternative splicing events. At least 42.56% of the discovered transcripts were novel isoforms of annotated genes. A total of 39 193 ORFs in novel transcripts and 18 596 ORFs in known transcripts were identified. Distribution patterns of the characterized transcripts in functional domain, subcellular localization, and transmembrane structure were predicted. In total, 1033 and 1204 differentially expressed genes were identified in the pN0 and pN1b groups, respectively. Moreover, novel isoforms of FRMD3, NOD1, and SHROOM4 were highlighted for their association with pN1b subtype. CONCLUSION: Our data provided the global transcriptome landscape of PTMC and also revealed the novel isoforms that associated with PTMC aggressiveness.
ABSTRACT
Introduction: Perceived benefits are considered one of the significant factors affecting an individual's decision-making process. Our study aimed to explore the influence mechanism of perceived benefits in the decision-making process of unsafe behaviors. Methods: Our study used the "One Stimulus-Two Key Choice (S-K1/K2)" paradigm to conduct an EEG experiment. Participants (N = 18) made decisions in risky scenarios under high perceived benefits (HPB), low perceived benefits (LPB), and control conditions (CC). Time domain analysis and time-frequency analysis were applied to the recorded EEG data to extract ERPs (event-related potentials) and EROs (event-related oscillations), which include the P3 component, theta oscillations, alpha oscillations, and beta oscillations. Results: Under the HPB condition, the theta power in the central (p = 0.016*) and occipital regions (p = 0.006**) was significantly decreased compared to the CC. Similarly, the alpha power in the frontal (p = 0.022*), central (p = 0.037*), and occipital regions (p = 0.014*) was significantly reduced compared to the CC. Under the LPB condition, theta power in the frontal (p = 0.026*), central (p = 0.028*), and occipital regions (p = 0.010*) was significantly reduced compared to the CC. Conversely, alpha power in the frontal (p = 0.009**), central (p = 0.012*), and occipital regions (p = 0.040*) was significantly increased compared to the HPB condition. Discussion: The high perceived benefits may reduce individuals' internal attention and evoke individuals' positive emotions and motivation, leading individuals to underestimate risks. Consequently, they exhibited a greater inclination toward unsafe behaviors. However, the low perceived benefits may reduce individuals' memory review, resulting in a simple decision-making process, and they are more inclined to make fast decisions to avoid loss. The research results can help to provide targeted intervention measures, which are beneficial to reducing workers' unsafe behaviors.
ABSTRACT
At present, the research of safety science discipline is limited to the level of describing psychology and behaviors, because the cognitive neural mechanisms behind them are unknown. This paper introduces an emerging interdiscipline, namely neuro-safety science, which uses the neuroscientific methods to investigate the neural systems behind safely relevant behaviors. Qualitative methods such as literature review method and theoretical model construction method were adopted for this study. Based on the background of neuro-safety science, the definition of neuro-safety science was defined, its connotation was analyzed, and the research contents from two aspects of theoretical research and practical application research were proposed. Methodology system including research principles, research routes, research procedure and research methods, and the paradigm system of neuro-safety science were put forward. At last, the application research on neuro-safety science was forecasted. This paper opens up a new research perspective for the research of safety science, and provide guidance and reference to develop neuro-safety science.
ABSTRACT
Incidental emotions would lead to accidents by influencing risk perception. However, few works of research further studied how incidental emotions affect risk perception at the neurological level. Before the experimental task, we used video clips for emotion elicitation. Then, the event-related potential (ERP) technique was used to obtain data on the risk perception process. The results showed that: compared to neutral emotion, the participants' average reaction time was significantly shorter in positive and negative incidental emotion. Under negative incidental emotion, individuals overestimated risk and had a more significant deviation in risk perception; the amplitude of P2 and N2 components increased, and the amplitude of LPP component decreased under negative incidental emotion. Under positive incidental emotion, individuals' correct-response rate was higher. These findings indicated that incidental emotions affected the mid-term risk analysis stage and the late risk judgment stage of risk perception. In the mid-term risk analysis stage, individuals processed high-risk information with a negativity bias which led to stronger cognitive conflict, while individuals assessed risks more accurately due to a larger attentional span under positive incidental emotions. In the late risk judgment stage, individuals under negative incidental emotion devoted few attentional resources to risk information which led to a risk judgment deviation. In contrast, individuals had a more detailed cognitive process of risk information under positive incidental emotion. On these bases, this paper confirmed the influence of incidental emotions on risk perception and established an emotional information-processing model. This study provided a reference for emotional interventions to facilitate accident prevention.
ABSTRACT
Arrhythmias are perceived as a complication of pituitrin. However, injecting a standard dose of pituitrin via vein causes different arrhythmias. In our case, a 35-year-old female patient was admitted to the hospital due to a productive cough with sputum for 5 days and two occasions of massive hemoptysis. After 1 day of treatment using 500 ml normal saline with 10u pituitrin, the sputum was filled with small amounts of kermesinus bloodstains. When pituitrin was stopped without any other treatment, all presenting symptoms gradually subsided after half an hour, and the ECG returned to normal. Therefore, when treating massive hemoptysis by administering pituitrin intravenously, it is necessary to exercise great precaution and therapeutic measures.
Subject(s)
Hemoptysis , Pituitary Hormones, Posterior , Female , Humans , Adult , Hemoptysis/drug therapy , Electrocardiography , Pituitary Hormones, Posterior/therapeutic use , Arrhythmias, Cardiac/therapy , Arrhythmias, Cardiac/drug therapyABSTRACT
To solve the problems of high cement dosage and poor fluidity of conventional cemented paste backfill (CPB) materials, the fluidity and strength properties of foam-cemented paste backfill (FCPB) were studied in combination. Based on determining the optimum contents of a foaming agent and a foam stabilizer, FCPB density was measured. To investigate the fluidity and strength of FCPB under different foam contents (0%, 5%, 10%, 15%, 20%, 25%, 30%, and 40%), different solid contents (75 wt.% and 77 wt.%), and different cement-tailing ratios (1:4 and 1:5), spread tests and unconfined compressive strength (UCS) tests were conducted. In addition, the FCPB microstructure was analyzed by scanning electron microscopy (SEM). The results indicate that the optimum combination dosages of sodium lauryl sulfate (K12) and sodium carboxymethyl cellulose (CMC) are 0.5 g/L and 0.2 g/L. The density decreases with the foam content (FC), but the fluidity and strength of the FCPB increase first and then decrease with the FC. In addition, the microstructure analysis explains the enhanced strength of FCPB by adding foam. These results contribute to further understanding the effect of foam content on the fluidity and strength of the FCPB.
ABSTRACT
Leadership is a necessary element for ensuring workplace safety. Rather little is known about the role of leadership safety behaviours (LSBs) in the mining industry. Using regression analysis and structural equation modelling analysis, this study examined the cause-and-effect relationships between leadership safety behaviours and safety performance. Data were collected by questionnaires from 305 miners in China. Data were analysed using exploratory factor analysis and confirmatory factor analysis, which identified five main dimensions of LSBs: safety management commitment, safety communication with feedback, safety policy, safety incentives, and safety training; the analysis also identified three main dimensions of safety performance: employee's safety compliance, safety participation, and safety accidents. The results showed the overall effects of each LSB variable on safety compliance in descending order as: safety training (0.504), safety incentives (0.480), safety communication with feedback (0.377), safety management commitment (0.281), and safety policy (0.110). The overall effects of each LSB variable on safety participation in descending order were: safety training (0.706), safety incentives (0.496), safety management commitment (0.365), and safety policy (0.247). Furthermore, we found that safety management commitment and safety incentives increased employees' safety behaviours, but this influence was mediated by safety training, safety policy, and safety communication with feedback.
Subject(s)
Leadership , Safety Management , Communication , Humans , Mining , WorkplaceABSTRACT
The risks faced by the mining industry have always been prominent for every walk of life in China. As the direct cause of accidents, individual unsafe behaviors are closely related to their risk perception. So, it is important to explore the factors affecting miners' risk perception and analyze the influencing mechanisms between these factors and risk perception. The questionnaire survey method was used to collect the data of risk perception from nearly 400 respondents working in metal mines in China. Exploratory factor analysis and confirmatory factor analysis were used to analyze and process collected data. The impact of four factors affecting miners' risk perception was verified, namely: organizational safety atmosphere, organizational trust, knowledge level, and risk communication. Then, regression analysis, Pearson correlation analysis, and structural equation model analysis were used to examine the effect of the four influencing factors on miners' risk perception. The four influencing factors all have a positive impact on miners' risk perception; knowledge level has the largest explained variation of miners' risk perception, followed by risk communication. Organizational trust and organizational safety atmosphere have an indirect and positive impact on miners' risk perception intermediated by knowledge level and risk communication. The results offer four important aspects of mine safety management to help miners establish quick and accurate risk perception, thereby reducing unsafe behaviors and avoiding accidents.
Subject(s)
Miners , China , Humans , Mining , Perception , Safety ManagementABSTRACT
This experimental investigation was conducted to research the properties of polypropylene (PP) fiber-reinforced cemented paste backfill (CPB). The unconfined compressive strength (UCS) of the fiber-reinforced CPB showed a significant improvement with average UCS increase ratios of 141.07%, 57.62% and 63.17% at 3, 7 and 28 days, respectively. The macroscopic failure mode and SEM analysis indicated that fibers prevented the formation of large tensile and shear cracks during the pull-out and pull-off failure modes. A linear fitting function for the UCS at a curing time of 3 days and two polynomial fitting functions for the UCS at curing times of 7 and 28 days were established to characterize the relationship between the UCS of the fiber-reinforced and unreinforced CPB. Moreover, based on composite mechanics, nonlinear models related to the UCS and fiber reinforcement index were obtained. The estimated functions containing the fiber reinforcement index λ, which consists of the fiber content and aspect ratio of fiber, could evaluate the UCS. Furthermore, the fiber reinforcement index λ quantifies the enhancement by the fibers. Both estimation results indicated that the UCS values were estimated accurately at curing times of 3, 7 and 28 days in this study. Additionally, the estimation models could be used to guide the strength design of fiber-reinforced CPB. Besides this, the results showed that fiber-reinforced CPB can be used more widely in mine backfills and meets the requirements of controlled low-strength material (CLSM) for broader applications.
ABSTRACT
This paper presents the results of an experimental study on the unconfined compressive strength (UCS), indirect tensile strength (ITS), microstructural properties and environmental impacts of overflow tailings (OFT) cemented paste backfill (CPB). The test results show that the poor graded OFT contain 47.15% particles with size below 20⯵m, and high content of oxide and sulfide. The slump of fresh CPB mixture ranges from 19.50â¯cm to 21.60â¯cm, and its flowability meets the transport requirements. After being cured for 28 days, the UCS and ITS of CPB are less than 2â¯MPa and 0.5â¯MPa, respectively. Meanwhile, CPB exhibited low residual strength and high brittleness. The low strength is mainly due to the use of fine OFT. The results show that sulphate also has negative effect on strength and dissolve calcium silicate hydrate (C-S-H) while promoting the formation of secondary products (gypsum and ettringite), leading to generate cracks and decrease UCS at 28 curing time of some CPB mixtures. Increasing the cement content and solid mass concentration is the effective methods to improve the mechanical properties of CPB. The nuclear magnetic resonance (NMR) tests show that fine OFT with low osmotic coefficient (3.10e-06â¯cm/s) and high sulfur content cause high porosity from 25.0% to 33.1% of CPB, and the increase of the porosity is observed a negative influence on the UCS, but no obvious relationship between ITS and porosity is obtained. Scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) tests show that OFT particles were covered by C-S-H gel which can enhance the compactness and integrity of CPB. The SEM tests also found secondary products gypsum and ettringite. These finding suggest that OFT can be suitably used as backfill material to fill the underground stopes.
Subject(s)
Calcium Sulfate , Construction Materials , Compressive Strength , Microscopy, Electron, Scanning , SulfidesABSTRACT
It is generally believed that stress wave superposition does occur and plays an important role in cutting blasting with a single free surface, in which explosive columns of several blast holes with short spacing are simultaneously initiated. However, considering the large scatter of pyrotechnic delay detonators that are used in most underground metal mines in China, the existence of stress wave superposition and the influence of this effect on rock fragmentation are questionable. In the present study, the stress wave interaction in short-delay blasting with a single free surface was studied through the use of the LS-DYNA code. Stress waves induced by two blast holes blasting with different delays were compared with the single blast hole case, and the effects of delay time, detonating location and spacing on stress wave superposition were investigated. The numerical results showed that for blast holes with a 1 m spacing, stress wave interaction only occurs when the delay time is 0 ms and does not occur for blasting with delays of more than 1 ms. An increase in the duration of a stress wave via optimizing the detonation location does not improve the stress wave interaction. For a 1 ms delay, stress wave superposition only occurs when the spacing is more than 4 m, which is a rare case in practice. The results indicated that the occurrence of stress wave superposition for blasting with a single free surface is strictly limited to conditions that would be difficult to achieve under the existing delay accuracy of detonators. Therefore, it is unrealistic to improve fragmentation via the stress wave interaction in field blasting. Furthermore, the numerical results of the stress wave interaction also show that there would be a great potential to reduce the hazardous vibrations induced by short-delay blasting by using electronic detonators with better control of delays in an order of several milliseconds.