Assessing the impact of different Urushiol primer solvents on dentin remineralization and bond strength.

OBJECTIVES: To investigate urushiol's potential as a dentin cross-linking agent, promoting remineralization of etched dentin and preventing activation of endogenous proteases causing collagen degradation within the hybrid layer. The goal is to improve bond strength and durability at the resin-dentin interface. METHODS: Urushiol primers with varying concentrations were prepared using ethanol and dimethyl sulfoxide (DMSO) as solvents. Dentin from healthy molars underwent grinding and acid etching for 15 s, followed by a 1min application of urushiol primer. After 14 and 28 days of remineralization incubation and remineralization were used to assess by Attenuated Total Reflection Fourier Transform Infrared spectroscopy (ATR-FTIR), Micro-Raman spectroscopy, X-ray Diffraction (XRD), Atomic Force Microscopy (AFM), Vickers Hardness, Scanning Electron Microscopy (SEM), and Energy X-ray dispersive spectroscopy (EDS). The overall performance of urushiol primers as dentin adhesives was observed by microtensile bond strength (µTBS) testing and nanoleakage assessment. Investigated the inhibitory properties of the urushiol primers on endogenous metalloproteinases (MMPs) utilizing in situ zymography, and the cytotoxicity of the primers was tested. RESULTS: Based on ATR-FTIR, Raman, XRD, EM-EDS and Vickers hardness analyses, the 0.7%-Ethanol group significantly enhanced dentin mineral content and improved mechanical properties the most. Pretreatment notably increased the µTBS of restorations, promoted the stability of the mixed layer, and reduced nanoleakage and MMPs activity after 28 days. SIGNIFICANCE: The urushiol primer facilitates remineralization in demineralized dentin, enhancing remineralization in etched dentin, effectively improving the bonding interface stability, with optimal performance observed at a 0.7 wt% concentration of the urushiol primer.

Emulsion-Templated Gelatin/Amino Acids/Chitosan Macroporous Hydrogels with Adjustable Internal Dimensions for Three-Dimensional Stem Cell Culture.

The demand for macroporous hydrogel scaffolds with interconnected porous and open-pore structures is crucial for advancing research and development in cell culture and tissue regeneration. Existing techniques for creating 3D porous materials and controlling their porosity are currently constrained. This study introduces a novel approach for producing highly interconnected aspartic acid-gelatin macroporous hydrogels (MHs) with precisely defined open pore structures using a one-step emulsification polymerization method with surface-modified silica nanoparticles as Pickering stabilizers. Macroporous hydrogels offer adjustable pore size and pore throat size within the ranges of 50 to 130 µm and 15 to 27 µm, respectively, achieved through variations in oil-in-water ratio and solid content. The pore wall thickness of the macroporous hydrogel can be as thin as 3.37 µm and as thick as 6.7 µm. In addition, the storage modulus of the macroporous hydrogels can be as high as 7250 Pa, and it maintains an intact rate of more than 92% after being soaked in PBS for 60 days, which is also good performance for use as a biomedical scaffold material. These hydrogels supported the proliferation of human dental pulp stem cells (hDPSCs) over a 30 day incubation period, stretching the cell morphology and demonstrating excellent biocompatibility and cell adhesion. The combination of these desirable attributes makes them highly promising for applications in stem cell culture and tissue regeneration, underscoring their potential significance in advancing these fields.

Programmable optical switching integrated chip for 4-bit binary true/inverse/complement code conversions based on fluorinated photopolymers.

In this work, programmable optical switching integrated chips for 4-bit binary true/inverse/complement optical code conversions (OCCs) are proposed based on fluorinated photopolymers. Fluorinated bis-phenol-A novolac resin (FAR) with low absorption loss and fluorinated polyacrylate (FPA) with high thermal stability are self-synthesized as core and cladding layer, respectively. The basic architecture of operating unit for the photonic chip designed is composed of directional coupler Mach-Zehnder interferometer (DC-MZI) thermo-optic (TO) switching, X-junction, and Y-bunching waveguide structures. The waveguide module by cascading 16 operating units could realize OCCs function through optical transmission matrix. The response time of the 4-bit binary OCCs is measured as about 300 µs. The insertion loss and extinction ratio of the actual chip are obtained as about 10.5 dB and 15.2 dB, respectively. The electric driving power consumption for OCCs is less than 6 mW. The true/inverse/complement OCCs are achieved by the programmable modulation circuit. The proposed technique is suitable for achieving optical digital computing system with high-speed signal processing and low power consumption.

Investigation of aging resistance for dental resin composites with and without glass flakes.

OBJECTIVES: Outstanding physical-mechanical properties and aging resistance are key requirements for dental resin composite since it will be placed in the oral environment for a long time. In this work, a new dental resin composite mainly modified by glass flakes was fabricated, and the aging resistance was evaluated by comparing with commercial composites without glass flakes. MATERIALS AND METHODS: The new dental resin composite was produced through hand blending of inorganic glass flakes/Si-Al-borosilicate glass (58wt%:7wt% of dental resin composite), POSS-MA (5wt% of resin matrix), Bis-GMA/TEGDMA(64.4wt%:27.6wt% of resin matrix), and CQ/EDMAB (0.9wt%:2.1wt% of resin matrix) together. The flexural strength, elasticity modulus, and hardness, as well as wear were tested for evaluating the aging resistance of different dental resin composite. RESULTS: Among 6 kinds of commercial composites in this study, after 6-month water storage, the maximum percentage of performance degradation is that the flexural strength decreased 39.96%, elasticity modulus decreased 51.53% and hardness decreased 12.52%. In contrast, the new synthesized material decreased 14.53%, 20.88%, and 0.61%, respectively, and performed lesser wear depth compared to some other groups (P < 0.05). CONCLUSIONS: It was observed that the new dental resin composite performed better performance stability and wear resistance when compared with commercial dimethacrylate-based or low shrinkage dental resin composite tested in this study. CLINICAL RELEVANCE: This possibly paves a path for designing tailored dental composite for practical application. Since the aging resistance of dental resin composite modified by glass flakes is superior, it has the potential to be used for promoting the durability of dental resin composite.

Triple-layered optical interconnecting integrated waveguide chip based on epoxy cross-linking fluorinated polymer photonic platform.

In this study, a triple-layered optical interconnecting integrated waveguide chip was designed and fabricated using an epoxy cross-linking polymer photonic platform. Fluorinated photopolymers FSU-8 and AF-Z-PC EP were self-synthesized as waveguide cores and cladding materials, respectively. The triple-layered optical interconnecting waveguide device comprised 4 × 4 arrayed waveguide grating (AWG) -based wavelength-selective switching (WSS) arrays, 4 × 4 multi-mode interference (MMI) -cascaded channel-selective switching (CSS) arrays, and 3 × 3 direct-coupling (DC) interlayered switching arrays. The overall optical polymer waveguide module was fabricated by direct UV writing. For the multilayered WSS arrays, the wavelength-shifting sensitivity was ∼0.48 nm/°C. For the multilayered CSS arrays, the average switching time was ∼280 µs, and the maximum power consumption was <30 mW. For interlayered switching arrays, the extinction ratio approximated 15.2 dB. The transmission loss for the triple-layered optical waveguide chip was measured as 10.0-12.1 dB. The flexible multilayered photonic integrated circuits (PIC) can be used in high-density integrated optical interconnecting systems with a large-volume optical information transmission capacity.

A novel resin cement to improve bonding interface durability.

Bonding failure is one of the main causes of failure of dental restorations. The bonding strength, aging resistance, and polymerization shrinkage of cement can affect the stability of the bonding interface and lead to marginal microleakage. To reduce the bonding failure rate of restorations, a novel polyurethane (PU) cement was designed to improve the mechanical properties, hydrophobicity, degree of conversion (DC), polymerization shrinkage, bond strength and aging resistance of cement by introducing isophorone diisocyanate (IPDI) and hydroxyethyl methacrylate (HEMA) and adjusting the polyester : polyether ratio to increase the degree of cross-linking. Experimental results verified that the novel PU could increase the mechanical properties and thermal stability of the cement, reduce polymerization shrinkage during the curing reaction, improve the bonding performance and DC, endow the cement with hydrophobic properties, and improve its ability to resist aging in the salivary environment to maintain the long-term stability of interfacial bonding under the influence of comprehensive factors. The results of this study provide a new direction and insights to reduce microleakage and improve the success rate of restorations.

Polyphenol-Enriched Extract of Lacquer Sap Used as a Dentine Primer with Benefits of Improving Collagen Cross-Linking and Antibacterial Functions.

Commercial dentin adhesive systems are applied to restorations due to their resistant bonding properties, but they suffer from the lack of bioactivity and are prone to hydrolysis. Therefore, to overcome these limitations, an eco-friendly natural monomer, urushiol, was adopted to be a primer in dentin bonding due to its interaction with collagen and antibacterial activity, preventing further hydrolysis development. First, urushiol was determined to be capable of improving the biological stability of dentin collagen through cross-linking. Using high-fidelity analytical chemistry techniques, such as Fourier transform infrared spectroscopy, we quantified the effects of urushiol on collagen molecules. It could also effectively decrease weight loss after collagenase ingestion by improving the stability of dentin. Moreover, urushiol inhibited Streptococcus mutans growth as well as its biofilm formation. Finally, we demonstrated that the urushiol primer could improve the bonding strength, particularly after aging. The cross-linking and antibacterial functions of urushiol have provided promising developmental prospects for biomaterials in dentin adhesion.

Metal-printing tunable interlayer waveguide coupler using low-loss fluorinated polycarbonate.

Tunable three-dimensional (3D) integrated optical waveguide chips with optical interconnection function are beneficial to expand the application of optical devices in a 3D integrated photonic module. Here, we propose a thermo-optic (TO) tunable interlayer waveguide coupler based on the metal-printing technique. Low-loss fluorinated polycarbonate (AF-Ali-PC MA) and poly (methyl methacrylate-glycidyl methacrylate) [P(MMA-co-GMA)] are synthesized as waveguide core and cladding layer, respectively. The thermal stability and optical adsorption characteristics of AF-Ali-PC MA are analyzed. Optical signal transmission features of the interlayer coupling waveguides are simulated. The optical response properties and fabrication process flows of a dynamic multilayer waveguide chip can be greatly improved by the metal-printing technique. The on-off time of the TO interlayer coupling chip is obtained as 250 µs, and the electrical power consumption is measured as 7.6 mW. To the best of our knowledge, this is the first time that a TO tunable interlayer waveguide coupler is achieved by an efficient metal-printing method, which is suitable for large-scale photonic integrated circuit (PIC) systems and multilayer optical interconnection (OXC) networks.

Interlayer directional coupling thermo-optic waveguide switches based on functionalized epoxy-crosslinking polymers.

In this study, interlayer directional coupling (DC) thermo-optic (TO) waveguide switches were designed and fabricated using functionalized epoxy-crosslinking polymers. Fluorinated SU-8 (FSU-8) with a photo-initiating epoxy-crosslinking network was self-synthesized as a waveguide core material. A copolymer of methyl methacrylate and glycidyl methacrylate P(MMA-co-GMA) with a thermo-initiating epoxy crosslinking structure was self-synthesized as a waveguide cladding material. Compared with commercial pure SU-8 and PMMA, FSU-8 exhibited a lower absorption loss and P(MMA-co-GMA) exhibited a higher thermal stability. Using epoxy-crosslinking functionalized polymers, the structure of the waveguides and electrode heaters were optimized, and the performance parameters of the interlayer DC TO switches were simulated. At a signal wavelength of 1550 nm, the insertion loss, extinction ratio, and power consumption of the actual interlayer devices were measured as 6.7 dB, 15.6 dB, and 9 mW, respectively. The rising and falling response times of the TO switches were obtained as 631.6 µs and 362 µs, respectively. The self-leveling ability and solvent resistance characteristic of the epoxy-crosslinking network for FSU-8 and P(MMA-co-GMA) may guarantee the realization of interlayer DC TO waveguide switches. The proposed technique will be suitable for photonic integrated waveguide chips with multilayer stacking dynamic optical information interactions.

Construction of antibacterial adhesion surfaces based on bioinspired borneol-containing glycopolymers.

Preparation of antibacterial coating materials is considered an effective strategy to prevent medical device-related infections. In the present study, by combining 2-lactobionamidoethyl methacrylamide with a uniquely structured borneol compound, new copolymers poly(2-lactobionamidoethyl methacrylamide-co-glycidyl methacrylate-co-isobornyl acrylate) (poly(LAEMA-co-GMA-co-BA)) were synthesized by a simple free-radical polymerization. An amine containing silane layer was first prepared on the substrate surface by a silanization reaction. The glycopolymers were grafted onto the silane layer through covalent bonding to obtain glycosylated coatings. X-ray photoelectron spectroscopy (XPS) confirmed the successful preparation of the APTES-functionalized surface and polymer layers. The surface wettability was measured by the contact angle (CA). The coated surfaces were relatively flat and smooth as confirmed by Atomic Force Microscopy (AFM). Moreover, the prepared coatings showed good antibacterial adhesion properties toward both E. coli and S. aureus. Furthermore, no significant cytotoxicity to the MRC-5 cells (lung fibroblasts) in vitro was observed, indicating the good biocompatibility of the antibacterial coatings. This study provides an excellent strategy for designing an antibacterial surface containing glycopolymers and natural antibacterial compounds, and these coatings may be suitable for medical devices.

Dual Cross-Linked Hydrogels with Injectable, Self-Healing, and Antibacterial Properties Based on the Chemical and Physical Cross-Linking.

Injectable hydrogels have become a promising material for biomedical engineering applications, but microbial infection remains a common challenge in their application. In this study, we presented an injectable antibacterial hydrogel with self-healing property based on a dual cross-linking network structure of dynamic benzoxaborole-sugar and quadruple hydrogen bonds of the 2-ureido-4-pyrimidone (UPy) moieties at physiological pH. Dynamic rheological experiments demonstrated the gelatinous behavior of the double cross-linking network (storage modulus G' > loss modulus G″), and the modulus showed frequency-dependent behavior. The noncovalent interactions of UPy units in the polymer segment endowed the injectable hydrogels with good mechanical strength. By varying the solid contents, UPy units, as well as the pH, the mechanical properties of hydrogels could be controlled. Additionally, the hydrogels exhibited not only excellent self-healing and injectable properties but also pH and sugar dual-responsiveness. Moreover, the hydrogels could effectively inhibit the growth of both Escherichia coli and Staphylococcus aureus while exhibiting low toxicity. 3D cell encapsulation experiment results also demonstrated the potential use of these hydrogels as cell culture scaffolds. Taken together, the injectability, self-healing, and antimicrobial properties of the prepared hydrogels showed great promise for translational medicine, such as cell and tissue engineering applications.

Antifouling and Antibacterial Polymer-Coated Surfaces Based on the Combined Effect of Zwitterions and the Natural Borneol.

The development and application of natural antibacterial materials have always been the focus of biomedical research. Borneol as a natural antibacterial compound has received extensive attention. However, the hydrophobicity caused by its unique structure limits its application range to a certain extent. In this study, we combine zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) with a complex bicyclic monoterpene structure borneol compound and prepare an excellent antifouling and antibacterial surface via the Schiff-base bond. The prepared coating has excellent hydrophilicity verified by the contact angle (CA), and its polymer layer is confirmed by X-ray photoelectron spectroscopy (XPS). The zwitterion MPC and borneol moieties in the copolymer play a coordinating role, relying on super hydration and the special stereochemical structure to prevent protein adsorption and inhibit bacterial adhesion, respectively, which are demonstrated by bovine serum albumin (BSA) adsorption and antibacterial activity test. Moreover, the water-soluble borneol derivative as the antibacterial surfaces we designed here was biocompatible toward MRC-5 (lung fibroblasts), as showed by in vitro cytotoxicity assays. Such results indicate the potential application of the as-prepared hydrophilic surfaces in the biomedical materials.

Hydrolysis-resistant and stress-buffering bifunctional polyurethane adhesive for durable dental composite restoration.

A new elastic polyurethane (PU) adhesive was reported in this study to improve the stability and durability of the dental adhesion interface. A polyurethane oligomer was synthesized by the solution polymerization method, and a diluent and solvent were added to prepare PU adhesives. The water sorption, water solubility, contact angle, thermal stability, degree of conversion and mechanical properties of the PU adhesives were evaluated. Experimental applications for tooth restoration (microtensile bond strength and microleakage) were also performed, and cytotoxicity test was carried out. The water sorption and solubility of the PU adhesives were significantly lower than those of three commercial adhesives. The microtensile bond strength of the PU adhesives was improved after thermocycling test, and the extent of microleakage was diminished when compared with that of commercial adhesives. Biocompatibility testing demonstrated that the PU adhesive was non-toxic to L929 fibroblasts. This study shows the ability of PU adhesive to improve the stability and durability of the dental adhesion interface and may refocus the attention of scientists from rigid bonding to flexible bonding for dental adhesion, and it sheds light on a new strategy for the stable and durable bonding interface of dentine adhesives.

Synthesis, characterization, and aging resistance of the polyurethane dimethacrylate layer for dental restorations.

In this study, polyurethane dimethacrylate (PUDMA) was synthetized from different components and incorporated into a direct resin composite restoration system with the aim to buffer tooth-resin interfacial stresses and maintain the marginal adaptation. The tensile strength, elongation at fracture (ε), and thermal stability of the PUDMA layer were characterized, showing a tensile strength of 22 MPa, an ε of 112%, and a thermal decomposition temperature of about 282°C. In addition, the degree of conversion, water sorption/solubility, hydrophobicity, microtensile bond strength (µTBS), marginal leakage, and cytotoxicity in vitro were evaluated for the PUDMA layer. The data were analyzed using one-way ANOVA, except for leakage depths (which were analyzed using the Wilcoxon paired-rank test). The level of significance was set at 0.05. Compared with dental adhesives, PUDMA displayed a higher degree of conversion, lower water sorption/solubility, and improved hydrophobicity and biocompatibility in vitro. After thermocycling, the µTBS of the restoration system containing PUDMA had increased compared with the µTBS at 24 h. Restorations containing PUDMA showed lower leakage depths than those which did not contain PUDMA. In conclusion, because of its hydrophobic and elastic nature, the PUDMA layer, when used as an intermediate between tooth and resin restoratives, may buffer interfacial stresses, improve the stability and durability of the bonding interface, and reduce microleakage.

The functions of hydrophobic elastic polyurethane combined with an antibacterial triclosan derivative in the dentin restoration interface.

Dentin restoration produces weak interfaces because of the effects of bacterial microflora, biofilms, and mechanical, thermal, and shrinkage stresses. This results in secondary caries. Therefore, hydrophobic elastic polyurethane (PU) containing different concentrations of triclosan derivatives was synthesized and applied to solve this problem. The antibacterial PU was characterized according to its tensile strength (TS) and elasticity (ε) via a universal testing machine, and water sorption (Wsp) and solubility testing (Wsl) was performed according to ISO 4049: 2009. Additionally, this study evaluated the antibacterial properties of PU against Streptococcus mutans (ATCC35668) and Escherichia coli (ATCC25922). A marginal leakage test was performed to evaluate the leakage prevention property. As a result, the antibacterial PU showed high TS (>17 MPa), high elasticity (ε > 65%), and low Wsp (>81.06 µg/mm3) and Wsl (>11.22 µg/mm3). The PU exhibited antibacterial effects against both Streptococcus mutans and Escherichia coli. The antibacterial rates were over 90% and >99% for the 3% and 5% groups, respectively. Moreover, the marginal level of leakage was 0. Based on the mechanical properties, Wsp and Wsl values and the antibacterial properties, the 3% group exhibited satisfactory performance and has been deemed a possible solution to reduce the occurrence of secondary caries.

Construction of a silicate-based epitaxial transition film on a zirconia ceramic surface to improve the bonding quality of zirconia restorations.

The effect of a silicate-based epitaxial transition film on zirconia produced by a silicate solution during zirconia-resin bonding was investigated. The airborne-particle abraded zirconia was placed in different concentrations of silicate solutions and heated at 50 °C. The silicate transition film was characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX), contact angle measurement and profilometry. The silicate-based epitaxial transition film was successfully constructed on the surface of zirconia, and the surface morphology and composition of zirconia changed. After coupling with KH570 hydrolysate, the shear bond strength (SBS) of zirconia-resin after either 24 h water storage or 5000 thermal cycles can be significantly improved by a silicate-based epitaxial transition film on the surface of zirconia, and all the samples had no cytotoxicity. This may provide a new strategy for improving the bonding quality of zirconia restorations.

Enhancement performance of application mussel-biomimetic adhesive primer for dentin adhesives.

In this study, we evaluated bioinspired adhesive primers for durable adhesion between dentin and composite resins. N-3,4-Dihydroxyphenethyl methacrylamide (DMA) primer monomer (small bifunctional group molecules containing catechol and acrylic groups at opposite ends) was prepared to mimic the interaction between the catechol group and the mineral interface of marine mussels. The shear bonding strength, microleakage, degree of conversion, contact angle, and compatibility were tested. The shear bond strength was significantly improved, and microleakage was diminished after the application of the DMA primer. However, the degree of conversion was decreased. The wettability of the dentin was enhanced, and the DMA primer showed no negative influence on cell proliferation. The results of this study showed the possibility of using DMA primers in clinical practice. This may provide a new strategy for improving adhesion durability.

Fabrication of Robust Antibacterial Coatings Based on an Organic-Inorganic Hybrid System.

Antibacterial coatings have drawn much attention because of their high potential applications in medicine. However, the weak mechanical property, poor biosafety, and biocompatibility of most established antibacterial coatings restrict their applications. In this study, robust antibacterial coatings were fabricated via a simple organic-inorganic hybrid method. The polymer component provides an excellent antibacterial property to the coatings, and the hybrid silica sol improves the hardness of coatings. After cross-linking, network-structured coatings were formed. The coating surfaces exhibited high transmittance, excellent mechanical property, and good antibacterial effect against Escherichia coli (Gram-negative) and Streptococcus mutans (Gram-positive). Additionally, the robust coatings were noncytotoxic with satisfactory biocompatibility. Such results provide a theoretical basis for their applications in the biomedical field.

Superhydrophobic coatings with self-cleaning and antibacterial adhesion properties for denture base.

In this paper, coatings with antibacterial adhesion, excellent biocompatibility, good superhydrophobicity and highly transmittance were fabricated by mixing hydroxyl group fluropolymer (PHF), polyurethane oligomer (Pre-PU) with epoxy functionalized SiO2 nanoparticles and thermal-crosslinked. The properties of coatings were investigated by Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Atomic force microscopy (AFM), Ultraviolet near-infrared visible spectrophotometer (UV-3600). The morphology results indicated that the roughness scale of micro-nano structure surface can be monitored by changing the contents of functionalized polymers and SiO2. The coating S2 showed outstanding superhydrophobicity with the contact angle of 155.9°, the sliding angle less than 1°, and good transparency. Furthermore, the coating exhibited antibacterial adhesion and favorable biosafety, confirming a potential for application in the oral field.

Fluorinated photopolymer cascaded MMI-based integrated optical waveguide switching matrix with encoding functions.

In this work, thermo-optic tunable 4 × 4 cascaded multimode interference based integrated optical waveguide switching matrices are designed and fabricated using photopolymer lightwave circuits. The materials of the waveguide core and cladding are fluorinated epoxy-terminated copolycarbonate and polymethylmethacrylate, respectively. The driving power that controls matrices for binary encoding of different optical switching states are simulated and analyzed. The measured insertion loss of the actual chip is < 7.1 dB and the maximum crosstalk in adjacent channels is <-30 dB. The switching time is approximately 220 µs and the extinction ratio is obtained as 21.5 dB. This flexible encoding technique can be applied for achieving optical code-division multiple-access network coders.