ABSTRACT
The production of reinforced composite materials can generally benefit greatly from the use of natural cellulosic woody fibers as good sustainable resources. Natural plants like hemp, cotton, and bamboo are great options for knitters and crocheters looking to make eco-friendly goods. The current study examines the properties of natural fiber obtained from the stem of the Acacia pennata (AP) plant, as well as its basic physico-chemical, structural, thermal, and mechanical characteristics. The key goal of this work was to investigate how alkali treatment affected the AP fibers' morphology, chemical composition, tensile capabilities, morphological changes, structural changes, and thermal degradation (APFs). The SEM image and pXRD analyses support the improved surface roughness of the fiber, and that was seen after the alkaline treatment. From XRD analysis, the fiber crystallinity index (54.65%) was improved and it was connected to their SEM pictograms in comparison to untreated APF. Alkali-treated AP fibers include a higher percentage of chemical components including cellulose (51.38%) and ash (5.13%). Alkali-treated AP fibers have a lower amount of hemi-cellulose (30.30%), lignin (20.96%), pectin (8.77%), wax (0.12%), and moisture (13.44%) than untreated APF. Their low density and high cellulosic content will improve their ability to fiber matrices. The thermal behavior of AP fiber at various temperatures was demonstrated by TG-DTA analysis, and tensile strength was also investigated.
Subject(s)
Acacia , Alkalies/chemistry , Cellulose/chemistry , Lignin/chemistry , Tensile StrengthABSTRACT
Lignocellulose biomass during pretreatment releases various compounds, among them the most important is reducing sugars, which can be utilized for the production of biofuels and some other products. Thereby, innovative greener pretreatment techniques for lignocellulosic materials have been considered to open a new door in the aspects of digestibility of the rigid carbohydrate-lignin matrix to reduce the particle size and remove hemicellulose/lignin contents to successfully yield valid bioproducts. This article reviews about the composition of lignocelluloses and emphasizes various green pretreatments viz novel green solvent-based IL and DES steam explosion, supercritical carbon dioxide explosion (Sc-CO2) and co-solvent enhanced lignocellulosic fractionation (CELF) along with suitable mechanistic pathway of LCB pretreatment process. Finally, this article concludes that the existing pretreatments should be redesigned to conquer the demands by large scale production and suggests combined pretreatment methods to carry out various biomass pre-processing.
Subject(s)
Carbohydrates , Lignin , Lignin/metabolism , Biomass , Solvents , Biofuels , HydrolysisABSTRACT
This review mainly determines novel and advance physical, chemical, physico-chemical, microbiological and nanotechnology-based pretreatment techniques in lignocellulosic biomass pretreatment for bio-H2 production. Further, aim of this review is to gain the knowledge on the lignocellulosic biomass pretreatment and its priority on the efficacy of bio-H2 and positive findings. The influence of various pretreatment techniques on the structure of lignocellulosic biomass have presented with the pros and cons, especially about the cellulose digestibility and the interference by generation of inhibitory compounds in the bio-enzymatic technique as such compounds is toxic. The result implies that the stepwise pretreatment technique only can ensure eventually the lignocellulosic biomass materials fermentation to yield bio-H2. Though, the mentioned pretreatment steps are still a challenge to procure cost-effective large-scale conversion of lignocellulosic biomass into fermentable sugars along with low inhibitory concentration.
Subject(s)
Cellulose , Lignin , Hydrolysis , Lignin/chemistry , Biomass , FermentationABSTRACT
Scientists are grabbing huge attention as well as consciousness on non-renewable energy sources for the global energy crises because of gradual increase in oil price, fast depletion or low availability of resources, and the release of more toxic-gases (CO2, SOx, NxO) during exhaustion, etc. Due to such hitches, the key need is to find alternative biofuels or feedstocks to replace fossil fuel energy demands worldwide. Currently, microalgae have become intrigued feedstock candidates (3rd generation source of biofuel) to replace nearly 50-60 % of fossil fuels due to high production of biomass and oil, mitigating CO2 and wastewater remediation. The present work demonstrated the current developments and future perspectives on large-scale algal cultivation strategies for the biorefinery economy. In addition, various advanced cultivation techniques adopted for enhanced biomass production and cost-effective methods for bioenergy production were detailly discussed.
Subject(s)
Microalgae , Biofuels , Biomass , Carbon Dioxide , Cost-Benefit Analysis , NutrientsABSTRACT
This paper reviews current knowledge on sources, spread and removal mechanisms of antibiotic resistance genes (ARGs) in microbial communities of wastewaters, treatment plants and downstream recipients. Antibiotic is the most important tool to cure bacterial infections in humans and animals. The over- and misuse of antibiotics have played a major role in the development, spread, and prevalence of antibiotic resistance (AR) in the microbiomes of humans and animals, and microbial ecosystems worldwide. AR can be transferred and spread amongst bacteria via intra- and interspecies horizontal gene transfer (HGT). Wastewater treatment plants (WWTPs) receive wastewater containing an enormous variety of pollutants, including antibiotics, and chemicals from different sources. They contain large and diverse communities of microorganisms and provide a favorable environment for the spread and reproduction of AR. Existing WWTPs are not designed to remove micropollutants, antibiotic resistant bacteria (ARB) and ARGs, which therefore remain present in the effluent. Studies have shown that raw and treated wastewaters carry a higher amount of ARB in comparison to surface water, and such reports have led to further studies on more advanced treatment processes. This review summarizes what is known about AR removal efficiencies of different wastewater treatment methods, and it shows the variations among different methods. Results vary, but the trend is that conventional activated sludge treatment, with aerobic and/or anaerobic reactors alone or in series, followed by advanced post treatment methods like UV, ozonation, and oxidation removes considerably more ARGs and ARB than activated sludge treatment alone. In addition to AR levels in treated wastewater, it examines AR levels in biosolids, settled by-product from wastewater treatment, and discusses AR removal efficiency of different biosolids treatment procedures. Finally, it puts forward key-points and suggestions for dealing with and preventing further increase of AR in WWTPs and other aquatic environments, together with a discussion on the use of mathematical models to quantify and simulate the spread of ARGs in WWTPs. Mathematical models already play a role in the analysis and development of WWTPs, but they do not consider AR and challenges remain before models can be used to reliably study the dynamics and reduction of AR in such systems.
ABSTRACT
This review discusses a fresh pool of research findings reported on the multiple roles played by metal-based, magnetic, graphene-type, chitosan-derived, and sonicated nanoparticles in the treatment of pharmaceutical- and agrochemical-contaminated waters. Some main points from this review are as follows: (i) there is an extensive number of nanoparticles with diverse physicochemical and morphological properties which have been synthesized and then assessed in their respective roles in the degradation and mineralization of many pharmaceuticals and agrochemicals, (ii) the exceptional removal efficiencies of graphene-based nanomaterials for different pharmaceuticals and agrochemicals molecules support arguably well a high potential of these nanomaterials for futuristic applications in remediating water pollution issues, (iii) the need for specific surface modifications and functionalization of parent nanostructures and the design of economically feasible production methods of such tunable nanomaterials tend to hinder their widespread applicability at this stage, (iv) supplementary research is also required to comprehensively elucidate the life cycle ecotoxicity characteristics and behaviors of each type of engineered nanostructures seeded for remediation of pharmaceuticals and agrochemicals in real contaminated media, and last but not the least, (v) real wastewaters are extremely complex in composition due to the mix of inorganic and organic species in different concentrations, and the presence of such mixed species have different radical scavenging effects on the sonocatalytic degradation and mineralization of pharmaceuticals and agrochemicals. Moreover, the formulation of viable full-scale implementation strategies and reactor configurations which can use multifunctional nanostructures for the effective remediation of pharmaceuticals and agrochemicals remains a major area of further research.
Subject(s)
Environmental Pollutants , Nanostructures , Water Pollutants, Chemical , Water Purification , Adsorption , AgrochemicalsABSTRACT
Spent coffee grounds (SCG) are an important waste product millions of tons generated from coffee consumption and could be effectively utilized for various applications due to their high organic content. SCG can be used as a potential feedstock to develop coffee-based biorefinery towards value-added products generation through various biotechnological processes. Considerable developments have been reported on emerging SCG-based processes/products in various environmental fields such as removal of heavy metals and cationic dyes and in wastewater treatment. In addition, SCG are also utilized to produce biochar and biofuels. This review addressed the details of innovative processes used to produce polymers and catalysts from SCG. Moreover, the application of these developed products is provided and future directions of the circular economy for SCG utilization.
Subject(s)
Coffee , Metals, Heavy , Biofuels , Biopolymers , BiotechnologyABSTRACT
The developing approaches in the recovery of resources from biowastes for the production of renewable value-added products and fuels, using microbial cultures as bio-catalyst have now became promising aspect. In the path of anaerobic digestion, the microorganisms are assisting transformation of a complex organic feedstock/waste to biomass and biogas. This potentiality consequently leads to the production of intermediate precursors of renewable value-added products. Particularly, a set of anaerobic pathways in the fermentation process, yields small-chain fatty acids (SCFA), and medium-chain fatty acids (MCFA) via chain elongation pathways from waste valorization and CO2 fixation. This review focuses on the production of SCFA and MCFA from CO2, synthetic substrates and waste materials. Moreover, the review introduces the metabolic engineering of Escherichia coli and Saccharomyces cerevisiae for SCFAs/MCFAs production. Furtherly, it concludes that future critical research might target progress of this promising approach as a valorization of complex organic wastes.
Subject(s)
Carbon Dioxide , Fatty Acids , Biofuels , Fatty Acids, Volatile , FermentationABSTRACT
The production of bio/microbial-based polymers, polyhydroxyalkanoates (PHAs) from volatile fatty acids (VFAs) of dark fermentative effluents in the bio-H2 reactor is being paid attention, owing to their commercial demand, applications and as carbon as well as energy storage source. Since, they are the cheap precursors for such valuable renewable biopolymers which all possess the properties; those are analogous to the petro-derived plastics. Several studies were stated, related to the consumption of both individual and mixed VFAs for the potential PHAs production. Their biodegradability nature makes them extremely desirable alternative to fossil-derived synthetic polymers. In this regard, this review summarizes the use of bio-based PHAs production via both microbial and biochemical pathways using dark fermentative bio-H2 production from waste streams as feedstock. Furthermore, this review deals the characteristics, synthesis and production of the bio-based PHAs along with their co-polymers and applications to give an outlook on future research.
Subject(s)
Polyhydroxyalkanoates , Biopolymers , Fatty Acids, Volatile , Fermentation , HydrogenABSTRACT
Industrially, harvesting of the microalgal biomass is a techno-economic tailback, which essentially meant for the algal biomass industry. It is considered energy as well as cost-intensive in view of the fact that the dewatering process during harvesting. In this review chemical reactions involved in the flocculation of microalage biomass via various certain principal organic polymers are focused. Besides, it focuses on natural biopolymers as flocculants to harvest the cultivated microalgae. Commercially, bio-flocculation is suitable and cost-effective in the midst of a range of adopted harvesting techniques and the selection of an appropriate bioflocculant depends on its efficacy on the several microalgae strains like potential biomass fixation, ecological stride and non-perilous nature. The harvesting of toxin free microalgae biomass in large quantity by such flocculants can be considered to be one of the most cost-effective performances towards sustainable biomass recovery.
ABSTRACT
In recent years, lignin valorization is commercially an important and advanced sustainable process for lignocellulosic biomass-based industries, primarily through the depolymerization path. The conversion of the lignin moieties into biofuels and other high value-added products are still challenging to the researchers due to the heterogeneity and complex structure of lignin-containing biomass. Besides, the involvement of different microorganisms that carries varying metabolic and enzymatic complex systems towards degradation and conversion of the lignin moieties also discussed. These microorganisms are frequently short of the traits which are obligatory for the industrial application to achieve maximum yields and productivity. This review mainly focuses on the current progress and developments in the pretreatment routes for enhancing lignin degradation and also assesses the liquid and gaseous biofuel production by fermentation, gasification and hybrid technologies along with the biorefinery schemes which involves the synthesis of high value-added chemicals, biochar and other valuable products.
Subject(s)
Fermentation , Lignin/chemistry , Biofuels , Biomass , Humans , Lignin/metabolismABSTRACT
The generation of biohydrogen as source of biofuel/bioenergy from the wide variety of biomass has gathered a substantial quantum of research efforts in several aspects. One of the major thrusts in this field has been the pursuit of technically sound and effective methods and/or approaches towards significant improvement in the bioconversion efficiency and enhanced biohydrogen yields. In this perspective, the present contribution showcases the views formulated based on the latest advances reported in dark fermentative biohydrogen production (DHFP), which is considered as the most feasible route for commercialization of biohydrogen. The potential prospects and future research avenues are also presented.
Subject(s)
Biomass , Darkness , Fermentation , Green Chemistry Technology/methods , Hydrogen/metabolism , BiofuelsABSTRACT
In this study, recycling of spent coffee grounds (SCG) as a potential feedstock for alternative fuel production and compounds of added value in Turkey was assessed. The average oil content was found (≈ 13% w/w). All samples (before and after extraction) were tested for scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), calorific value, surface analysis and porosity, Fourier transform infrared (FT-IR), and elemental analysis to assess their potential towards fuel properties. Elemental analysis indicated that carbon represents the highest percentages (49.59% and 46.42%, respectively), followed by nitrogen (16.7% and 15.5%), hydrogen (6.74% and 6.04%), and sulfur (0.851% and 0.561%). These results indicate that SCG can be utilized as compost, as it is rich in nitrogen. Properties of the extracted oil were examined, followed by biodiesel production. The quality of biodiesel was compared with American Society for Testing and Materials (ASTM) D6751 standards, and all the properties complied with standard specifications. The fatty acid compositions were analyzed by gas chromatography. It was observed that coffee waste methyl ester (CWME) is mainly composed of palmitic (35.8%) and arachidic (44.6%) acids, which are saturated fatty acids. The low degree of unsaturation provides an excellent oxidation stability (10.4 hr). CWME has also excellent cetane number, higher heating value, and iodine value with poor cold flow properties. The studies also investigated blending of biodiesel with Euro diesel and butanol. Following this, a remarkable improvement in cloud and pour points of biodiesel was obtained. Spent coffee grounds after oil extraction is an ideal material for garden fertilizer, feedstock for ethanol, biogas production, and as fuel pellets. The outcome of such research work produces valuable insights on the recycling importance of SCG in Turkey. IMPLICATIONS: Coffee is a huge industry, and coffee has been widely used due to its refreshing properties. This industry generates large quantities of waste. Therefore, recycling of spent coffee grounds for producing alternative fuels and compounds of added value is crucial. Elemental analysis indicated that coffee waste can be utilized as compost, as it is rich in nitrogen. Coffee waste after oil extraction is an ideal feedstock for ethanol and biogas production, garden fertilizer, and as fuel pellets. The low degree of unsaturation provides excellent oxidation stability. Its biodiesel has also excellent cetane number, higher heating value, and lower iodine value.
Subject(s)
Biofuels , Coffee , Recycling , Chromatography, Gas , Ethanol , Fatty Acids/analysis , Fatty Acids/chemistry , Oxidation-Reduction , Spectroscopy, Fourier Transform Infrared , TurkeyABSTRACT
The interest in microalgae for wastewater treatment and liquid bio-fuels production (i.e. biodiesel and bioethanol) is steadily increasing due to the energy demand of the ultra-modern technological world. The associated biomass and by-product residues generated from these processes can be utilized as a feedstock in anaerobic fermentation for the production of gaseous bio-fuels. In this context, dark fermentation coupled with anaerobic digestion can be a potential technology for the production of hydrogen and methane from these residual algal biomasses. The mixture of these gaseous bio-fuels, known as hythane, has superior characteristics and is increasingly regarded as an alternative to fossil fuels. This review provides the current developments achieved in the conversion of algal biomass to bio-hythane (H2+CH4).
Subject(s)
Biofuels , Microalgae , Biomass , Fermentation , Methane , WastewaterABSTRACT
(Red, green and brown) macroalgal biomass is a propitious candidate towards covenant alternative energy resources to be converted into biofuels i.e. hydrogen. The application of macroalgae for hydrogen fermentation (promising route in advancing the biohydrogen generation process) could be accomplished by the transformation of carbohydrates, which is a topic receiving broad attention in recent years. This article overviews the variety of marine algal biomass available in the coastal system, followed by the analyses of their pretreatment methods, inhibitor formation and possible detoxification, which are key-aspects to achieve subsequent H2 fermentation in a proper way.
Subject(s)
Biofuels , Seaweed , Biomass , Fermentation , HydrogenABSTRACT
The synthesis of nanoparticles (NP) using algae has been underexploited and even unexplored. In recent times, there are few reports on the synthesis of NP using algae, which are being used as a bio-factory for the synthesis. Moreover, the algae are a renewable source, so that it could be effectively explored in the green synthesis of NP. Hence, this review reports on the biosynthesis of NP especially gold and silver NP using algae. The most widely reported NP from algae are silver and gold than any other metallic NP, which might be due to their enormous biomedical field applications. The NP synthesized by this method is mainly in spherical shape; the reports are revealing the fact that the cell free extracts are highly exploited for the synthesis than the biomass, which is associated with the problem of recovering the particles. Besides, mechanism involving in the reduction and stabilization is well demonstrated to deepen the knowledge towards enhancement possibilities for the synthesis and applications.
Subject(s)
Metal Nanoparticles/chemistry , Microalgae/metabolism , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/therapeutic use , Biomass , Biomimetics , Drug Delivery Systems , Gold , Green Chemistry Technology , Humans , Metal Nanoparticles/therapeutic use , Metal Nanoparticles/ultrastructure , Microalgae/growth & development , Nanotechnology , Plants/metabolism , SilverABSTRACT
Some biologically active mixed ligand complexes (1-9) have been synthesized from 5-Fluorouracil (5-FU; A) and amino acids (B) such as glycine (gly), L-alanine (ala) and L-valine (val) with Ni(II), Cu(II) and Zn(II) ions. The synthesized mixed ligand complexes (1-9) were characterized by various physico-chemical, spectral, thermal and morphological studies. 5-Fluorouracil and its mixed ligand complexes have been tested for their in vitro biological activities against some pathogenic bacterial and fungal species by the agar well diffusion method. The in vitro antioxidant activities of 5-Fluorouracil and its complexes have also been investigated by using the DPPH assay method. The results demonstrate that Cu(II) mixed ligand complexes (4-6) exhibit potent biological as well as antioxidant activities compared to 5-Fluorouracil and Ni(II) (1-3) and Zn(II) (7-9) mixed ligand complexes. Further, the cleaving activities of CT DNA under aerobic conditions show moderate activity with the synthesized Cu(II) and Ni(II) mixed ligand complexes (1-6) while no activity is seen with Zn(II) complexes (7-9). Binding studies of CT DNA with these complexes show a decrease in intensity of the charge transfer band to the extent of 5-15% along with a minor red shift. The free energy change values (Δ()G) calculated from intrinsic binding constants indicate that the interaction between mixed ligand complex and DNA is spontaneous.
Subject(s)
Amino Acids/chemistry , Anti-Infective Agents/chemistry , Antioxidants/chemistry , DNA/metabolism , Fluorouracil/chemistry , Amino Acids/pharmacology , Animals , Anti-Infective Agents/pharmacology , Antioxidants/pharmacology , Bacteria/drug effects , Bacterial Infections/drug therapy , Cattle , Fluorouracil/pharmacology , Fungi/drug effects , Ligands , Mycoses/drug therapyABSTRACT
A series of novel bioactive mixed ligand Ni(II) complexes (1a-1d) have been synthesised by using 2-aminobenzamide (2AB) and some bio-relevant amino acid ligands. The synthesised Ni(II) complexes were structurally characterized by various physico-chemical and spectral studies. Elemental analysis and molar conductance values suggest that 1:1:1 stoichiometry with non-electrolytic nature. Based on the spectral studies, both the ligands act as bidentate and they chelate with Ni(II) ion via amino-NH2 and amido-O and deprotonated carboxylato-O and amino-NH2 atoms respectively to form a stable six, five membered chelate rings with mononuclear octahedral geometry. Thermal studies show the presence of coordinated water and acetate molecules in the coordination. The powder X-ray diffractogram and SEM pictograph imply that all the complexes have fine crystalline peaks with homogeneous surface morphology. In vitro antimicrobial and antioxidant studies indicate the complexes are more active than free 2-aminobenzamide ligand. The Ni(II)-2AB-gly/phe complexes (1a and 1d) show significant oxidative cleavage and DNA binding activities. Moreover, the 3D molecular modeling, analysis of the complexes has also been studied.
Subject(s)
Amino Acids/pharmacology , DNA/metabolism , Nickel/pharmacology , ortho-Aminobenzoates/chemical synthesis , ortho-Aminobenzoates/pharmacology , Animals , Anti-Infective Agents/pharmacology , Antioxidants/pharmacology , Bacteria/drug effects , Cattle , DNA Cleavage/drug effects , Electric Conductivity , Electrons , Fungi/drug effects , Kinetics , Ligands , Magnetic Phenomena , Mass Spectrometry , Microbial Sensitivity Tests , Models, Molecular , Oxidation-Reduction/drug effects , Powders , Thermogravimetry , Vibration , X-Ray Diffraction , ortho-Aminobenzoates/chemistry , ortho-Aminobenzoates/metabolismABSTRACT
Coordinating behavior of novel N2O type mixed ligand complexes (1-6) have been synthesized from substituted fluoropyrimidine [5-Fluorouracil (5-FU; A)] with biopotent imidazole enzyme constituents (B) viz., imidazole(him) and benzimidazole(bim) in the presence of Ni(II), Cu(II) and Zn(II) ions. Synthesized complexes were characterized by chemical analysis, spectral studies, magnetic moment and conductivity measurements. The results of chemical analysis and the observed low molar conductance values propose their stoichiometry to be 1:1:1 (M:A:B) with non-electrolytic nature. From the spectral data, it is inferred that the ligands A & B coordinate with M(II) ions in bi and monodentate approach through C(4)=O, N(3) and imidazole ring N(3) atoms respectively. The thermogravimetric analysis shows the dehydration, decomposition and thermal stability of mixed ligand complexes. XRD and SEM patterns show sharp crystalline peaks with homogeneous morphology. In vitro antimicrobial activities of free ligands (A & B) and their metal complexes were screened against some pathogenic strains by well diffusion technique. Absorption and gel electrophoresis experiments on the interaction of mixed ligand complexes with DNA suggest that all the complexes can bind as well as cleave the DNA by intercalation between chromophores and DNA base pairs. In addition, in vitro antioxidant activities were tested by DPPH free radical scavenging model.
Subject(s)
Antimetabolites/chemistry , Antioxidants/chemistry , Coordination Complexes/chemistry , Fluorouracil/analogs & derivatives , Imidazoles/chemistry , Pyrimidines/chemistry , Animals , Antimetabolites/pharmacology , Antioxidants/pharmacology , Bacteria/drug effects , Bacterial Infections/drug therapy , Cattle , Coordination Complexes/pharmacology , Copper/chemistry , Copper/pharmacology , DNA/chemistry , DNA Cleavage/drug effects , Fluorouracil/pharmacology , Fungi/drug effects , Humans , Imidazoles/pharmacology , Ligands , Microbial Sensitivity Tests , Mycoses/drug therapy , Nickel/chemistry , Nickel/pharmacology , Pyrimidines/pharmacology , Zinc/chemistry , Zinc/pharmacologyABSTRACT
Mixed ligand complexation of 2-aminobenzamide (2AB) as ligand [L] with Zn(II) in the presence of some bio-relevant amino acid constituents like glycine (gly), L-alanine (ala), L-valine (val) and L-phenylalanine (phe) as ligand [B] have been investigated using pH-metric measurements with a combined pH electrode at different temperatures (300, 310, 320 and 330 ± 0.1 K) in 50% (v/v) ethanol-water mixture containing I = 0.15 M NaClO(4) as supporting electrolyte. Computer assisted analysis of the experimental titration data showed the presence of ZnLB and ZnLB2 species as mixed ligand complexes in addition to various binary species. In ZnLB/ZnLB(2) species, both primary and secondary ligands act as bidentate to form a stable six, five membered chelate ring. The calculated stabilization parameter Deltalog K, log X, log X' and % R.S. values clearly show the mixed ligand complexes have higher stabilities than their binary. Thermodynamic parameters DeltaG, DeltaH and DeltaS have been derived from the temperature dependence of the stability constants. The complexation behavior of ZnLB species has been studied by means of electronic spectra. The percentage distribution of various binary and mixed ligand species of each type of the complexes in solution depending on pH and the ratio of Zn(II) to 2-aminobenzamide/amino acid of the systems.