Developing an exclusive sensor based on molecularly imprinted polymer/Multi-walled carbon nanotubes/Fe3O4@Au nanocomposite for the selective determination of an anti-cancer drug imatinib.

Determination of pharmaceuticals especially anticancer drugs is one of the important issues in environmental and medical investigation and creating good information about human health. The presence sturdy introducing an electroanalytical sensor based on molecularly imprinted polymer (MIP)/Multi-walled carbon nanotubes (MWCNTs)/Au@Fe3O4 nanoparticles modified carbon paste electrode (PE) to determine imatinib (IMA). The MIP/MWCNTs/Au@Fe3O4/PE showed catalytic activity and also a sensitive strategy to sensing IMA in the concentration range 1-1000 µM with a limit of detection of 0.013 µM. The MIP/MWCNTs/Au@Fe3O4/PE has shown interesting results in the analysis of IMA in real samples, and the interference investigations results show the high selectivity of the MIP/MWCNTs/Au@Fe3O4/PE in the monitoring of IMA in complex fluids such as tablet and blood serum and results approved by F-test and t-test as statistical methods.

Cu-BTC MOF/ionic liquid nanocomposite as novel catalyst to electrochemical monitoring of digoxin in pharmaceutical and environmental samples.

There is no effective environmental treatment strategy that does not include monitoring for pharmaceutical compounds in environmental and biological fluids. The widespread presence of pharmaceutical-based pollutants in water sources is a significant public health concern. The treatment process relies heavily on maintaining a stable digoxin concentration in bodily fluids. Finding the correct dose for this medication appears to be crucial. In this research, an easy and high sensibility electrochemical sensor was developed to determine digoxin based on a paste electrode (CPE) that was modified with Cu-BTC MOF and ion liquid ((IL); 1-Methyl-3-Butyl-imidazolinium bromide in this case) using voltammetric methods in 0.1 M phosphate buffer solution (PBS) at pH 5.0. The sensor's selectivity was significantly increased by using Cu-BTC MOF and IL to detect digoxin. The characteristics of the electrode modifiers were evaluated by SEM, XRD and EDS techniques. The LDR was found to be 0.1-40 µM and the LOD of 0.08 µM, respectively.

Survey of antibacterial activity and release kinetics of gold-decorated magnetic nanoparticles of Fe0 conjugated with sulfamethoxazole against Escherichia coli and Staphylococcus aureus.

Drug delivery of antibiotics with magnetic nanoparticles improved by coating metals such as gold and silver has recently been studied. This work describe a simple method to synthesize modified magnetic nanoparticles which have high ability to modify the customary formulation of antibiotics such as sulfamethoxazole (SMX) and pursuant study of adsorption-desorption (release) of this drug. These synthesized nanoparticles were characterized by different methods, including field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and mapping, Fourier-transform infrared spectroscopy, X-ray diffraction, vibrating-sample magnetometry, thermogravimetric analysis and zeta potential test. Present assay showed a well correlation with the introduced carrier for the drug. Also the hypothesis were proved by some adsorption isotherm models and drug kinetics studies of carriers with different drug release kinetics models. This study confirmed the adsorption isotherm models and kinetics of drug sorbate are Temkin and Pseudo-First-Order Lagergren models, respectively; the kinetics of drug release from this carrier is based on Zero-Order model. The values of MIC in antibacterial test for pure SMX and SMX conjugated nanoparticles against Escherichia coli were calculated to be 14 and 2.5 µg/mL, respectively, and these values against Staphylococcus aureus were 24 and 1.25 µg/mL, respectively.

Facile Synthesis of NiO/ZnO nanocomposite as an effective platform for electrochemical determination of carbamazepine.

The pharmaceutical science demand for sustainable and selective electrochemical sensors which exhibit ultrasensitive capabilities for the monitoring of different drugs. In an attempt to build a useful electrochemical sensor, we describe a most efficient method for the fabrication of NiO/ZnO nanocomposite through aqueous chemical growth method. The successfully synthesized NiO/ZnO nanocomposite is successfully employed to modify a glassy carbon electrode in order to build a sensitive and reliable electrochemical sensor for the detection of carbamazepine (CBZ), an anticonvulsant drug. The morphological texture, functionalities and crystalline structure of prepared nanocomposite were determined via FTIR, XRD, EDX, TEM, and SEM analysis. In order to examine the charge transfer kinetics, the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to exploit the electrochemical properties of the synthesized nanocomposite. The NiO/ZnO nanocomposite exhibited excellent electron transfer kinetics and less resistive behavior than the individual NiO and ZnO nanoparticles. The differential pulse voltammetry and cyclic voltammetry tools were used for the fluent determination of CBZ. Certain parameters were optimized to develop an effective method including optimum scan rate 60 mV/s, potential range from 0.4 to 1.4 V and BRB as supporting electrolyte with pH 3. The developed sensor showed exceptional response for CBZ under the linear dynamic range from 5 to 100 µM. The limit of detection of proposed NiO/ZnO sensor for the CBZ was calculated to be 0.08 µM. The analytical approach of prepared electrochemical sensor was investigated in different pharmaceutical formulation with acceptable percent recoveries ranging from 96.7 to 98.6%.

Effect of probiotic bacteria on physicochemical, microbiological, textural, sensory properties and fatty acid profile of sour cream.

Sour cream is a dairy product with good potential to act as a food carrier for probiotic bacteria. The effect of probiotic cultures on the quality of sour cream from dry dairy ingredients was assessed during 5 weeks of storage. The treatments design was as follows: Bifidobacterium, Bifidobacterium + Lactobacillus casei, Lactobacillus acidophilus, Lactobacillus acidophilus + Lactobacillus casei and Lactobacillus casei. Fatty acids profile, texture, microbial load and sensory characteristics were analyzed. Comparison of fatty acids of different creams produced showed that there is a significant difference between the produced creams. There are a wide range of fatty acids in the structure of sour cream fat. Also, with the addition of these bacteria, the texture of the samples became firmer during storage. The sensory analyses showed that the addition of all three bacteria increased the overall acceptance of this product by the panelists. It is suggested that sour cream fortified with probiotics well orientated functional food had accepted composition and sensory properties.

Advancement in electrochemical strategies for quantification of Brown HT and Carmoisine (Acid Red 14) From Azo Dyestuff class.

Brown HT and carmoisine, which are the most used dyestuffs in pharmaceuticals, textiles, cosmetics and foods, are important components of the Azo family. Although the Azo group is not toxic or carcinogenic under normal conditions, these dyestuffs require great care due to the reduction of the Azo functional group to amines. In particular, fast, reliable, easy, on-site and precise determinations of these substances are extremely necessary and important. In this review, the properties, applications, and electrochemical determinations of brown HT and carmoisine, which are used as synthetic food colorants, are discussed in detail. Up to now, sensor types, detection limits (LOD and LOQ), and analytical applications in the developed electrochemical strategies for both substances were compared. In addition, the validation parameters such as the variety of the sensors, sensitivity, selectivity and electrochemical technique in these studies were clarified one by one. While the electrochemical techniques recommended for brown HT were mostly used for the removal of dyestuff, for carmoisine they included fully quantitative centered studies. The percentiles of voltammetric techniques, which are the most widely used among these electroanalytical methods, were determined. The benefits of a robust electrochemical strategy for the determination of both food colors are summed up in this review. Finally, the brown HT and carmoisine suggestions for future perspectives in electrochemical strategy are given according to all their applications.

Amplified electrochemical sensor employing CuO/SWCNTs and 1-butyl-3-methylimidazolium hexafluorophosphate for selective analysis of sulfisoxazole in the presence of folic acid.

In the present work, CuO nanoparticle decorated on single wall carbon nanotubes (CuO/SWCNTs) nanocomposite was successfully synthesized by chemical precipitation method and used for modification of carbon paste electrode (CPE) in the presence of 1-butyl-3-methylimidazolium hexafluorophosphate (1-B-3-MIHFP) liquid as binder. The novel voltammetric sensor was used as first electrochemical sensor for determination of sulfisoxazole (SFX). CuO/SWCNTs nanocomposite characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD) methods. Voltammetric methods such as cyclic voltammetry, square wave voltammetry (SWV), electrochemical impedance spectroscopy (EIS) and chronoamperometry were performed to assess the electrochemical performance of CuO/SWCNTs/1-B-3-MIHFP/CPE towards SFX in aqueous solution. The voltammetric obtained data confirm the significant enhancement of oxidation current and reduction overvoltage for electro-oxidation of SFX at a surface of CuO/SWCNTs/1-B-3-MIHFP/CPE. The square wave voltammetric response shows the linear increment of oxidation signals with an increase in the concentration of SFX in the range of 0.08-650µM with limit of detection 0.04µM. Using CuO/SWCNTs/1-B-3-MIHFP/CPE the SFX and folic acid peaks are separated ca. 0.72 and 0.895V, respectively; hence SFX can be detected in the presence of folic acid. Finally, the CuO/SWCNTs/1-B-3-MIHFP/CPE was used as high sensitive tools for analysis of SFX and folic acid in real samples.