Biomass waste as an alternative source of carbon and silicon-based absorbents for CO2 capturing application.

The production of low-cost solid adsorbents for carbon dioxide (CO2) capture has gained massive consideration. Biomass wastes are preferred as precursors for synthesis of CO2 solid adsorbents, due to their high CO2 adsorption efficiency, and ease of scalable low-cost production. This review particularly focuses on waste biomass-derived adsorbents with their CO2 adsorption performances. Specifically, studies related to carbon (biochar and activated carbon) and silicon (silicates and geopolymers)-based adsorbents were summarized. The impact of experimental parameters including nature of biomass, synthesis route, carbonization temperature and type of activation methods on the CO2 adsorption capacities of biomass-derived pure carbon and silicon-based adsorbents were evaluated. The development of various enhancement strategies on biomass-derived adsorbents for CO2 capture and their responsible factors that impact adsorbent's CO2 capture proficiency were also reviewed. The possible CO2 adsorption mechanisms on the adsorbent's surface were highlighted. The challenges and research gaps identified in this research area have also been emphasized, which will help as further research prospects.

Isolation of indole-3-acetic acid-producing Azospirillum brasilense from Vietnamese wet rice: Co-immobilization of isolate and microalgae as a sustainable biorefinery.

Production of indole-3-acetic acid (IAA) is well documented in various studies for the bacteria that inhabit the rhizosphere of plants, but with roots of wet rice, the outstandings have been not yet elucidated. This study began with the isolation of bacteria type strain Azospirillum sp. and developed the investigation to a screening of their ability in IAA production. This screening conducted a selection of only bacteria that was capable of the production of IAA with its content of over 25 µg. mL-1 for sequencing. Of 10 isolates only one resulted from the type strain Azospirillum brasilense (A. brasilense) with a similarity of 100%. Various factors that influence A. brasilense in biosynthesizing IAA such as temperature, pH, nitrogen presence and concentration of tryptophan in the culture medium were examined. The results indicated that the culture conditions were suitable for IAA biosynthesis at pH 6.5, 30 °C, culture media with nitrogen, and 0.1% trytophan. The next survey on the role of the immobilization of this bacteria with microalgae in alginate was highlighted to its support in microalgal growth. With the co-immobilization of bacteria and microalgae, the density of Chlorella vulgaris was significantly increased during 15-day culture, inducing 2.2 times of cell content in culture batch microalgae immobilized A. brasilense higher than that free-bacteria.

A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils.

Heavy metal pollution remains a global environmental challenge that poses a significant threat to human life. Various methods have been explored to eliminate heavy metal pollutants from the environment. However, most methods are constrained by high expenses, processing duration, geological problems, and political issues. The immobilization of metals, phytoextraction, and biological methods have proven practical in treating metal contaminants from the soil. This review focuses on the general status of heavy metal contamination of soils, including the excessive heavy metal concentrations in crops. The assessment of the recent advanced technologies and future challenges were reviewed. Molecular and genetic mechanisms that allow microbes and plants to collect and tolerate heavy metals were elaborated. Tremendous efforts to remediate contaminated soils have generated several challenges, including the need for remediation methodologies, degrees of soil contamination, site conditions, widespread adoptions and various possibilities occurring at different stages of remediation are discussed in detail.