Efficient pretreatment of lignocellulosic biomass with high recovery of solid lignin and fermentable sugars using Fenton reaction in a mixed solvent.

BACKGROUND: Pretreatment of biomass to maximize the recovery of fermentable sugars as well as to minimize the amount of enzyme inhibitors formed during the pretreatment is a challenge in biofuel process. We develop a modified Fenton pretreatment in a mixed solvent (water/DMSO) to combine the advantages of organosolv and Fenton pretreatments. The hemicellulose and cellulose in corncob were effectively degraded into xylose, glucose, and soluble glucose oligomers in a few hours. This saccharide solution, separated from the solid lignin simply by filtration, can be directly applied to the subsequent enzymatic hydrolysis and ethanol fermentation. RESULTS: After the pretreatment, 94% carbohydrates were recovered as soluble monosaccharide (xylose and glucose) and glucose oligomers in the filtrates, and 87% of solid lignin was recovered as the filter residue. The filtrates were directly applied to enzymatic hydrolysis, and 92% of raw corncob glucose was recovered. The hydrolysates containing the glucose and xylose from the enzymatic hydrolysis were directly applied to ethanol fermentation with ethanol yield equals 79% of theoretical yield. The pretreatment conditions (130 °C, 1.5 bar; 30 min to 4 h) are mild, and the pretreatment reagents (H2O2, FeCl3, and solvent) had low impact to environment. Using ferrimagnetic Fe3O4 resulted in similar pretreatment efficiency and Fe3O4 could be removed by filtration. CONCLUSIONS: A modified Fenton pretreatment of corncob in DMSO/water was developed. Up to 94% of the carbohydrate content of corncob was recovered as a saccharide solution simply by filtration. Such filtrate was directly applied to the subsequent enzymatic hydrolysis and where 92% of the corncob glucose content was obtained. The hydrolysate so obtained was directly applied to ethanol fermentation with good fermentability. The pretreatment method is simple, and the additives and solvents used have a low impact to the environment. This method provides the opportunity to substantially maximize the carbohydrate and solid lignin recovery of biomass with a comparatively green process, such that the efficiency of biorefinery as well as the bioethanol production process can be improved. The pretreatment is still relatively energy intensive and expensive, and further optimization of the process is required in large-scale operation.

Ligand free copper(I)-catalyzed synthesis of diaryl ether with Cs2CO3 via a free radical path.

Complexes [Cu(I)(2,4-dimethylphenoxy)2](-) (A) and [Cu(II)(2,4-dimethylphenoxy)2(p-tolyl)](-) (B) were observed by in situ electrospray ionization mass spectrometry (ESI-MS) analysis of the ligand free copper(I)-catalyzed C-O coupling reaction using Cs2CO3 under the catalytic reaction conditions indicating that they could be intermediates in the reaction. The radical scavenger cumene retarded the reaction. Catalytic cycles involving a free radical path are proposed based on these observations.

Possible intermediates of Cu(phen)-catalyzed C-O cross-coupling of phenol with an aryl bromide by in situ ESI-MS and EPR studies.

The C-O coupling reaction between 2,4-dimethylphenol and 4-bromotoluene catalyzed by the CuI/K2CO3/phen system can be inhibited by the radical scavenger cumene. Complexes [Cu(i)(phen)(1-(2,4-dimethylphenoxy)-4-methylbenzene)](+) (denoted as A), {H[Cu(i)(phen)(2,4-dimethylphenoxy)]}(+) and [Cu(i)(2,4-dimethylphenoxy)2](-) (denoted as B) were observed by in situ electrospray ionization mass spectrometry (ESI-MS) analysis of the copper(i)-catalyzed C-O coupling reaction under the catalytic reaction conditions indicating that they could be intermediates in the reaction. The in situ EPR study of the reaction solution detected the Cu(ii) species with a fitted g value of 2.188. A catalytic cycle with a single electron transfer (SET) step was proposed based on these observations.

Reactivity of [K3(phen)8][Cu(NPh2)2]3--a possible intermediate in the copper(I)-catalyzed N-arylation of N-phenylaniline.

Complex [K3(phen)8][Cu(NPh2)2]3 (1, phen = phenanthroline) was isolated from the catalytic C-N cross coupling reaction based on the CuI-phen-tBuOK catalytic system. Complex 1 can react with 4-iodotoluene to give 4-methyl-N,N-diphenylaniline (3a) in 50% yield (based on all available NPh2(-) ligands of complex 1). In addition, 1 can also work as an effective catalyst for the C-N coupling reactions under the same reaction conditions, indicating that 1 may be an effective intermediate of the catalytic system. In the presence of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), a radical scavenger, the stoichiometric reaction between complex 1 and 4-iodotoluene was significantly quenched to give a low yield of 12%. The results suggest that the radical path dominates in the reaction, with (phen)KNPh2 as the possible radical source. The structures of 1 and (phen)KNPh2 were both determined by single crystal X-ray diffraction studies.

A copper(II) complex as an intermediate of copper(I)-catalyzed C-N cross coupling of N-phenylaniline with aryl halide by in situ ESI-MS study.

Complexes [Cu(NPh(2))(2)](-), [Cu(NPh(2))I](-) and K[Cu(phen)(NPh(2)) (p-tolyl)](+) were observed by in situ electrospray ionization mass spectrometry (ESI-MS) analysis of the copper(I)-catalyzed C-N coupling reaction under the catalytic reaction condition indicating that they are intermediates in the reaction. A catalytic cycle composed of a free radical path and a 2e oxidative addition path is proposed based on these observations.

Intermediates of copper(I)-catalyzed C-S cross coupling of thiophenol with aryl halide by in situ ESI-MS study.

Complexes [Cu(SPh)(2)](-), [Cu(SPh)I](-) and K[Cu(SPh)(2)(Ph)](+) were observed by in situ electrospray ionization mass spectrometry (ESI-MS) analysis of the copper(i)-catalyzed C-S coupling reaction under catalytic reaction conditions indicating that they are intermediates in the reaction. A catalytic cycle was proposed based on these observations.

Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline.

Complex [Na(phen)(3)][Cu(NPh(2) )(2)](2), containing a linear bis(N-phenylanilide)copper(I) anion and a distorted octahedral tris(1,10-phenanthroline)sodium counter cation, has been isolated from the catalytic C-N cross-coupling reaction with the CuI/phen/tBuONa (phen=1,10-phenanthroline) catalytic system. Complex 2 can react with 4-iodotoluene to produce 4-methyl-N,N-diphenylaniline (3 a) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C-N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh(2))(2)](-) and [Cu(NPh(2))I](-) have been observed by in situ electron ionization mass spectrometry (ESI-MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single-crystal X-ray diffraction analysis.