Optimizing biochar application for enhanced cotton and sugar beet production in Xinjiang: a comprehensive study.

BACKGROUND: Optimizing biochar application is vital for enhancing crop production and ensuring sustainable agricultural production. A 3-year field experiment was established to explore the effects of varying the biochar application rate (BAR) on crop growth, quality, productivity and yields. BAR was set at 0, 10, 50 and 100 t ha-1 in 2018; 0, 10, 25, 50 and 100 t ha-1 in 2019; and 0, 10, 25 and 30 t ha-1 in 2020. Crop quality and growth status and production were evaluated using the dynamic technique for order preference by similarity to ideal solution with the entropy weighted method (DTOPSIS-EW), principal component analysis (PCA), membership function analysis (MFA), gray relation analysis (GRA) and the fuzzy Borda combination evaluation method. RESULTS: Low-dose BAR (≤ 25 t ha-1 for cotton; ≤ 50 t ha-1 for sugar beet) effectively increased biomass, plant height, leaf area index (LAI), water and fertility (N, P and K) productivities, and yield. Biochar application increased the salt absorption and sugar content in sugar beet, with the most notable increases being 116.45% and 20.35%, respectively. Conversely, BAR had no significant effect on cotton fiber quality. The GRA method was the most appropriate for assessing crop growth and quality. The most indicative parameters for reflecting cotton and sugarbeet growth and quality status were biomass and LAI. The 10 t ha-1 BAR consistently produced the highest scores and was the most economically viable option, as evaluated by DTOPSIS-EW. CONCLUSION: The optimal biochar application strategy for improving cotton and sugar beet cultivation in Xinjiang, China, is 10 t ha-1 biochar applied continuously. © 2024 Society of Chemical Industry.

Root penetration ability and plant growth in agroecosystems.

Root penetration ability is critical for plant growth and development. When roots encounter soil impedance, hormones are activated that affect cells and tissues, leading to changes in root morphology and configuration that often increase root penetration ability. Factors, such as root system architecture, root anatomic traits, rhizosphere exudation and root-induced phytohormones, influencing root penetration ability and how they affect plant performance under soil impedance were summarized. Root penetration ability affects plant capturing water and nutrients, and thus determines plant performance and productivity in adverse environments. Great efforts have been made in searching for the underlying mechanisms of root penetration ability, and tools have been developed for phenotyping variability in root penetration ability. Therefore, with the continued development of agroecosystems based on the advocated low input costs and controlled tillage, crops or genotypes of a crop species with stronger root penetration ability may have the potential for developing new varieties with enhanced adaptation and grain yield under mechanical impedance in soil.

Nitrogen supply improved plant growth and Cd translocation in maize at the silking and physiological maturity under moderate Cd stress.

Soil cadmium (Cd) contamination is a serious problem on agricultural land. Adequate nitrogen (N) may help ameliorate plant fitness under Cd stress. This study examined the role of N application in improving maize tolerance to Cd stress. Two maize genotypes, Zhongke11 (larger root system) and Shengrui999 (smaller root system), were grown in a loessal soil amended with Cd (Cd0, no added Cd; Cd1, 20 mg kg-1 soil as CdCl2·2.5 H2O) and N (N0, no added N; N1, 100 mg kg-1 soil as urea) under greenhouse, and plants were assessed at silking and maturity stages. Maize plants exhibited moderate Cd stress with significantly reduced grain yield, especially under low N (N1). Roots accumulated more Cd than above-ground parts. Grain Cd concentration was the least (0.05-0.06 µg g-1) among all organs which is below the safety threshold. Leaf Cd concentrations (0.24-1.18 mg kg-1) were also under the toxicity threshold. Nitrogen addition significantly improved plant growth, chlorophyll content, photosynthesis traits, and tissue Cd contents, and reduced Cd concentration in soil compared to N0 treatment. Nitrogen promoted Cd bioconcentration and translocation factors in stem and leaves. Cadmium stress reduced N fertilizer agronomic efficiency at maturity. At maturity, root Cd content was positively correlated with root N and calcium accumulation, and stem Cd content was positively correlated with stem N content (both P ≤ 0.05). Genotypes with different root system size differed in response to Cd toxicity and / or N deficit. The small-rooted genotype Shengrui999 was more tolerant to moderate Cd stress than the large-rooted Zhongke11. Addition of N ameliorated Cd stress in both maize genotypes by improving plant growth performance, and regulating Cd translocations among plant organs.

Microbial consortium inoculant increases pasture grasses yield in low-phosphorus soil by influencing root morphology, rhizosphere carboxylate exudation and mycorrhizal colonisation.

BACKGROUND: Pasture farming in south-western Australia is challenged by nutrient-poor soils. We assessed the impact of microbial consortium inoculant (MI) and rock mineral fertiliser (MF) on growth, nutrient uptake, root morphology, rhizosphere carboxylate exudation and mycorrhizal colonisation in three pasture grasses - tall fescue (Festuca arundinacea L.), veldt grass (Ehrharta calycina Sm.) and tall wheatgrass (Thinopyrum ponticum L.) grown in low-phosphorus (P) sandy soil in a glasshouse for 30 and 60 days after sowing (DAS). RESULTS: Veldt grass produced the highest specific root length and smallest average root diameter in both growth periods, and had similar shoot weight, root surface area and fine root length (except at 30 DAS) to tall fescue. Compared with the control, MI alone or combined with MF significantly increased shoot and root biomass (except root biomass at 30 DAS), likely due to the significant increases in root surface area and fine root length. Plants supplied with MI + MF had higher shoot N and P contents than those in the MI and the control treatments at 60 DAS. Malate, citrate and trans-aconitate were the major rhizosphere carboxylates exuded at both 30 and 60 DAS. Malate exudation varied among species and treatments in both growth periods, but citrate exudation was consistently higher in the low-P treatments (control and MI) than the MF and MI + MF treatments. CONCLUSION: Microbial consortium inoculant can positively influence pasture production in low-P soil by increasing root surface area and fine root length, whereas exudation of nutrient-mobilising carboxylates (citrate) is dependent more on soil P supply than microbial consortium inoculant. © 2021 Society of Chemical Industry.

Pyroxasulfone efficacy for annual ryegrass control is affected by wheat residue height, amount and orientation.

BACKGROUND: Pre-emergent herbicides play an important role in conservation agriculture, however, crop residues on the soil surface in these systems can intercept a considerable amount of herbicide during application. Cutting crops relatively high at harvest has some advantages, such as allowing faster harvest, and this also means that there is less horizontal residue on the soil surface. This field study tested the impact of standing wheat residue height and amount of horizontal residue on the interception, leaching and weed-control efficacy of the pre-emergent herbicide pyroxasulfone in the 2015 and 2016 growing seasons. RESULTS: Spray coverage of pyroxasulfone declined from 14.6% to 7.5% with increasing amounts (0 to 4 t ha-1 ) of horizontal wheat residue. Horizontal wheat residue at 1 t ha-1 had 10.3% spray coverage (more herbicide interception) compared with 15.4% for the equivalent amount of standing residue. Greater amounts of horizontal residue also significantly reduced the efficacy of pyroxasulfone in controlling ryegrass in the field and decreased pyroxasulfone concentrations in the soil. Rainfall after herbicide application increased herbicide efficacy for all residue amounts. Generally, cutting standing residue higher resulted a relatively small decrease in spray coverage at the soil surface and weed control efficacy, and this was significant only between nil stubble and 0.3 m cut height. CONCLUSION: Cutting residue relatively high, leaving less on the surface, improves spray coverage and herbicide efficacy compared with having more horizontal residue. This research may assist farmers and advisors to maximize the efficacy of pre-emergent herbicide in no-tillage systems. © 2019 Society of Chemical Industry.

Influence of rice straw biochar on growth, antioxidant capacity and copper uptake in ramie (Boehmeria nivea L.) grown as forage in aged copper-contaminated soil.

Copper (Cu) contamination in agricultural soil poses severe threats to living organisms, and possible ecofriendly solutions need to be considered for Cu immobilization, such as using biochar. A pot study was conducted to examine the effectiveness of biochar derived from rice straw (RSB) at various application rates (0, 2.5, 5 and 10% w/w) to mitigate possible risks of Cu solubility and its uptake by ramie (Boehmeria nivea L.) as forage. The plant growth parameters as well as soil chemical properties (pH, electrical conductivity and cation exchange capacity) notably improved with the increasing RSB application. Moreover, prominent reduction was observed in soil bioavailable Cu concentration by 96% with RSB application of 10% relative to control. In addition, Cu content in B. nivea roots, leaves and stems decreased by 60, 28 and 22%, respectively, for 10% RSB application. It was noted that chlorophyll content and gas exchange parameters in leaves were significantly higher at 10% RSB application than in control. Furthermore, 10% RSB resulted in a greater reduction in oxidative stress from the Cu in soil. Thus, soil amendment with RSB demonstrated positive results for Cu stabilization in aged Cu-contaminated soil, thereby reducing its accumulation and translocation in B. nivea and mitigating livestock feed security risks.

Phosphorus acquisition and utilisation in crop legumes under global change.

Improving phosphorus (P)-use efficiency in legumes is a worldwide challenge in the face of an increasing world population, dwindling global rock phosphate reserves, the relatively high P demand of legumes and global change. This review focuses on P acquisition of crop legumes in response to climate change. We advocate further studies on: firstly, the response of carboxylate exudation, mycorrhizas and root morphology to climate change and their role in P acquisition as dependent on edaphic factors; secondly, developing intercropping systems with a combination of a legume and another crop species to enhance P acquisition; and thirdly, the impact of the interactions of the major climate change factors on P acquisition in the field.

Impact of heat stress during seed filling on seed quality and seed yield in lentil (Lens culinaris Medikus) genotypes.

BACKGROUND: Lentil, a cool-season food legume, is highly sensitive to high temperatures, which drastically reduce biomass and seed yield. The effects of heat stress on qualitative and quantitative aspects of seeds are not yet known. RESULTS: In this study, we assessed the effects of high temperatures on quantitative and qualitative aspects of seeds in a heat-tolerant (HT; FLIP2009) and heat-sensitive (HS; IG4242) genotypes in a controlled environment. Initially, the plants were raised in a natural, outdoor environment (22/10 °C mean day/night temperature, 1350 µmol m-2 s-1 light intensity, 60-65% relative humidity) from November to mid-February until 50% flowering (114-115 days after sowing). After that, one set of plants was maintained in a controlled environment (28/23 °C, as mean day and night temperature, 500 µmol m-2 s-1 light intensity, 60-65% relative humidity;control) and one set was exposed to heat stress (33/28 °C, as mean day and night temperature, 500 µmol m-2 s-1 light intensity, 60-65% relative humidity), where they remained until maturity. Compared to control, heat stress reduced the seed growth rate by 30-44% and the seed-filling duration by 5.5-8.1 days, which ultimately reduced the seed yield by 38-58% and individual seed weights by 20-39%. Heat stress significantly damaged cell membranes and reduced chlorophyll concentration and fluorescence, and the photosynthetic rate, which was associated with a significant reduction in relative leaf water content. The proximate analysis of seed reserves showed that heat stress reduced starch (25-43%), protein (26-41%) and fat (39-57%) content, and increased total sugars (36-68%), relative to the controls. Heat stress also inhibited the accumulation of storage proteins including albumins, globulins, prolamins and glutelins (22-42%). Most of the amino acids decreased significantly under heat stress in comparison to control, whereas some, such as proline, followed by glycine, alanine, isoleucine, leucine and lysine, increased. Heat stress reduced Ca (13-28%), Fe (17-52%), P (10-54%), K (12.4-28.3%) and Zn (36-59%) content in seeds, compared to the controls. CONCLUSIONS: High temperatures during seed filling are detrimental for seed yield and quality components in lentil genotypes, with severe impacts on heat-sensitive genotypes. © 2018 Society of Chemical Industry.

Characterising root trait variability in chickpea (Cicer arietinum L.) germplasm.

Chickpea (Cicer arietinum L.) is an important grain legume crop but its sustainable production is challenged by predicted climate changes, which are likely to increase production limitations and uncertainty in yields. Characterising the variability in root architectural traits in a core collection of chickpea germplasm will provide the basis for breeding new germplasm with suitable root traits for the efficient acquisition of soil resources and adaptation to drought and other abiotic stresses. This study used a semi-hydroponic phenotyping system for assessing root trait variability across 270 chickpea genotypes. The genotypes exhibited large variation in rooting patterns and branching manner. Thirty root-related traits were characterised, 17 of which had coefficients of variation ≥0.3 among genotypes and were selected for further examination. The Pearson correlation matrix showed a strong correlation among most of the selected traits (P≤0.05). Principal component analysis revealed three principal components with eigenvalues >1 capturing 81.5% of the total variation. An agglomerative hierarchical clustering analysis, based on root trait variation, identified three genotype homogeneous groups (rescaled distance of 15) and 16 sub-groups (rescaled distance of 5). The chickpea genotypes characterised in this study with vastly different root properties could be used for further studies in glasshouses and field trials, and for molecular marker studies, gene mapping, and modelling simulations, ultimately aimed at breeding germplasm with root traits for improved adaptation to drought and other specific environments.

Root trait diversity, molecular marker diversity, and trait-marker associations in a core collection of Lupinus angustifolius.

Narrow-leafed lupin (Lupinus angustifolius L.) is the predominant grain legume crop in southern Australia, contributing half of the total grain legume production of Australia. Its yield in Australia is hampered by a range of subsoil constraints. The adaptation of lupin genotypes to subsoil constraints may be improved by selecting for optimal root traits from new and exotic germplasm sources. We assessed root trait diversity and genetic diversity of a core collection of narrow-leafed lupin (111 accessions) using 191 Diversity Arrays Technology (DArT) markers. The genetic relationship among accessions was determined using the admixture model in STRUCTURE. Thirty-eight root-associated traits were characterized, with 21 having coefficient of variation values >0.5. Principal coordinate analysis and cluster analysis of the DArT markers revealed broad diversity among the accessions. An ad hoc statistics calculation resulted in 10 distinct populations with significant differences among and within them (P < 0.001). The mixed linear model test in TASSEL showed a significant association between all root traits and some DArT markers, with the numbers of markers associated with an individual trait ranging from 2 to 13. The percentage of phenotypic variation explained by any one marker ranged from 6.4 to 21.8%, with 15 associations explaining >10% of phenotypic variation. The genetic variation values ranged from 0 to 7994, with 23 associations having values >240. Root traits such as deeper roots and lateral root proliferation at depth would be useful for this species for improved adaptation to drier soil conditions. This study offers opportunities for discovering useful root traits that can be used to increase the yield of Australian cultivars across variable environmental conditions.

A comprehensive resource of drought- and salinity- responsive ESTs for gene discovery and marker development in chickpea (Cicer arietinum L.).

BACKGROUND: Chickpea (Cicer arietinum L.), an important grain legume crop of the world is seriously challenged by terminal drought and salinity stresses. However, very limited number of molecular markers and candidate genes are available for undertaking molecular breeding in chickpea to tackle these stresses. This study reports generation and analysis of comprehensive resource of drought- and salinity-responsive expressed sequence tags (ESTs) and gene-based markers. RESULTS: A total of 20,162 (18,435 high quality) drought- and salinity- responsive ESTs were generated from ten different root tissue cDNA libraries of chickpea. Sequence editing, clustering and assembly analysis resulted in 6,404 unigenes (1,590 contigs and 4,814 singletons). Functional annotation of unigenes based on BLASTX analysis showed that 46.3% (2,965) had significant similarity (< or =1E-05) to sequences in the non-redundant UniProt database. BLASTN analysis of unique sequences with ESTs of four legume species (Medicago, Lotus, soybean and groundnut) and three model plant species (rice, Arabidopsis and poplar) provided insights on conserved genes across legumes as well as novel transcripts for chickpea. Of 2,965 (46.3%) significant unigenes, only 2,071 (32.3%) unigenes could be functionally categorised according to Gene Ontology (GO) descriptions. A total of 2,029 sequences containing 3,728 simple sequence repeats (SSRs) were identified and 177 new EST-SSR markers were developed. Experimental validation of a set of 77 SSR markers on 24 genotypes revealed 230 alleles with an average of 4.6 alleles per marker and average polymorphism information content (PIC) value of 0.43. Besides SSR markers, 21,405 high confidence single nucleotide polymorphisms (SNPs) in 742 contigs (with > or = 5 ESTs) were also identified. Recognition sites for restriction enzymes were identified for 7,884 SNPs in 240 contigs. Hierarchical clustering of 105 selected contigs provided clues about stress- responsive candidate genes and their expression profile showed predominance in specific stress-challenged libraries. CONCLUSION: Generated set of chickpea ESTs serves as a resource of high quality transcripts for gene discovery and development of functional markers associated with abiotic stress tolerance that will be helpful to facilitate chickpea breeding. Mapping of gene-based markers in chickpea will also add more anchoring points to align genomes of chickpea and other legume species.