ABSTRACT
PURPOSE: The high cost of orthopaedic care has attracted criticism in the current value-based health care environment. The objective of this work was to assess the properties of a willingness to pay (WTP)-based approach to estimate the monetary value that patients place on health improvements in chronic knee conditions following orthopaedic treatment. METHODS: A sample of patients with a chronic knee condition were surveyed between January and May of 2018 at a large orthopaedic practice. Each patient provided their WTP for restoration to ideal knee health and completed the Single Assessment Numerical Evaluation (SANE) to describe their baseline knee state. Average WTP was calculated for the total sample and stratified by income, age, and baseline SANE (for which 0 is the worst and 100 is the best) levels. The patient-perceived monetary value of each unit of SANE improvement was assessed. RESULTS: The study sample included 86 patients seeking orthopaedic care for a chronic knee condition. Mean baseline SANE score was 45.5 (standard deviation: 25.0). Mean WTP to obtain ideal knee function from baseline was $18,704 (standard deviation: $18,040). For the full sample, patients valued a 1-unit improvement in SANE score at $291.1 (ß: 291.1; P<0.05). The amount of money patients were willing to pay to achieve ideal knee function varied with age, income, and baseline knee state. CONCLUSIONS: Patients appear to highly value improvement in chronic knee conditions. Willingness-to-pay survey results appear to track expected variation in patient outcome valuation by income and baseline knee condition and could be a valuable approach to assess value-based care in orthopaedics.
ABSTRACT
BACKGROUND: Commercially available suture anchors for rotator cuff repairs can differ significantly in architecture and material. Clinical data on their osseous integration and its effect on patient-reported outcomes is scarce. Preclinical investigations indicated a higher rate of osseous integration for the open-architecture design of the Healicoil Regenesorb anchor than the closed-threaded design of the Twinfix (Smith & Nephew). The purpose of this study was to investigate these 2 anchors with different architecture and material to determine their effect on osseous integration and clinical outcomes after rotator cuff repair. METHODS: A prospective randomized controlled trial was performed from 2014 to 2019. Sixty-four patients (39 females, 25 males) with an average age of 58.7 years who underwent arthroscopic rotator cuff repair by one of 4 board-certified, fellowship-trained surgeons were randomized to receive Healicoil Regenesorb (PLGA/ß-TCP/Calcium Sulfate) or Twinfix Ultra HA (PLLA/HA) anchors. Thirty-two patients had Healicoil anchors implanted, and 32 patients had Twinfix anchors implanted. Of the 64 patients, 51 returned at 24 months for computed tomographic (CT) examination (25 Twinfix and 26 Healicoil) to determine osteointegration of the anchors. Patient-reported outcomes, including Penn Shoulder Score (PENN), Western Ontario Rotator Cuff Index, visual analog scale, EQ-5D, Single Assessment Numeric Evaluation, Global Rating of Change, were collected at baseline, 6 weeks, 3 months, 6 months, 12 months, and 24 months. Ultrasonography was used to assess rotator cuff integrity after 6 months. Two board-certified, fellowship-trained orthopedic surgeons, blinded to the type of anchors, analyzed the CT scans to assess the anchor osteointegration at 24 months using a previously published grading scale. RESULTS: There were no differences in demographics, preoperative outcomes, or baseline characteristics such as tear size, number of anchors, Goutallier classification, or smoking status between groups. There was no difference in osseous integration between the 2 anchors at 24 months (P = .117). Eight patients had rotator cuff retears, of which 2 patients had Twinfix anchors and 6 patients had Healicoil anchors (P = .18). There were no statistically significant differences in patient-reported outcomes or complications between groups. The 2-year PENN scores were 89 with the Twinfix and 88 with Healicoil anchors (P = .55). CONCLUSION: Despite differences in material and anchor architecture, the rate of healing and patient-reported outcomes were similar between the Twinfix and Healicoil anchor groups. The rate of osteointegration was the same at 2 years.
Subject(s)
Rotator Cuff Injuries , Rotator Cuff , Arthroscopy , Durapatite , Female , Humans , Male , Middle Aged , Ontario , Polyesters , Prospective Studies , Rotator Cuff/diagnostic imaging , Rotator Cuff/surgery , Rotator Cuff Injuries/diagnostic imaging , Rotator Cuff Injuries/surgery , Suture AnchorsABSTRACT
BACKGROUND: Multiple factors including muscle atrophy, fatty infiltration, smoking, advanced patient age, and increasing tear size have been identified as risk factors for retear after rotator cuff repair. However, little is known about what effect the length of the residual rotator cuff tendon has on the success of repair and patient outcomes. METHODS: This study included 64 patients. Patients were stratified based on a residual tendon length of greater than 15 mm (group 1, residual tendon) or 15 mm or less (group 2, no residual tendon). Rotator cuff tendon integrity was then evaluated using ultrasound imaging at 6 months. Outcome measures included the Single Assessment Numeric Evaluation score, visual analog scale score, EQ5D Index score, Global Rating of Change score, and Penn Shoulder Score. RESULTS: No differences were found between groups regarding demographic data or repair configuration. Assessment of tendon healing demonstrated an increased rate of tendons that had "not healed" in group 2 (19.3% [n = 5] vs. 13.2% [n = 5]), but this difference was not statistically significant (P = .55). Functional outcome scores improved significantly from preoperatively to final follow-up in both groups and displayed no differences at 6-month follow-up. CONCLUSION: A smaller residual tendon length was not a negative predictor of clinical outcomes following arthroscopic rotator cuff repair in patients with short-term follow-up. Although there was a trend toward a decreased rate of healing in patients with smaller residual tendons, this was not significant.
Subject(s)
Rotator Cuff Injuries/surgery , Rotator Cuff/diagnostic imaging , Rotator Cuff/pathology , Aged , Arthroplasty , Arthroscopy , Disease Progression , Female , Follow-Up Studies , Humans , Magnetic Resonance Imaging , Male , Middle Aged , Rotator Cuff Injuries/diagnostic imaging , Rotator Cuff Injuries/physiopathology , Shoulder Joint/diagnostic imaging , Shoulder Joint/physiopathology , Shoulder Joint/surgery , Treatment Outcome , UltrasonographyABSTRACT
BACKGROUND: Hamstring autograft size <8 mm has been shown to be a predictor for failure after anterior cruciate ligament (ACL) reconstruction. The ability to predict graft size preoperatively is helpful in counseling patients about the possible need for graft augmentation. PURPOSE: To determine whether preoperative ultrasound (US) measurements of hamstring tendons can predict intraoperative graft diameter during ACL reconstruction. STUDY DESIGN: Cohort study (diagnosis); Level of evidence, 2. METHODS: Twenty patients undergoing unilateral isolated ACL reconstruction were prospectively enrolled in the study (10 males, 10 females; mean ± SD age, 22.8 ± 6.6 years; height, 175.1 ± 7.1 cm; weight, 81.4 ± 14.2 kg; body mass index, 26.5 ± 4.1 kg/m2). Hamstrings were assessed by US, and double-looped semitendinosus-gracilis hamstring size was independently calculated with a freehand selection method on a nonmagnified US image by 2 orthopaedic surgeons. Intraoperative autograft size was determined with a standard graft-sizing tool. Intra- and interrater reliability was measured with intraclass correlation coefficients (ICCs) and standard error of the measure (SEM). A receiver operating characteristic curve was calculated to assess the ability of the US measurement to predict intraoperative measurements. RESULTS: The mean autograft diameter by US was 8.9 ± 0.98 mm, while the mean intraoperative hamstring graft size was 8.1 ± 0.89 mm. There was excellent intrarater (ICC2,1 = 0.95, SEM = 0.32 mm) and interrater (ICC2,1 = 0.88, SEM = 0.55 mm) reliability for US measurements. Receiver operating characteristic analysis showed that US did not consistently quantify graft size. Graft size did not significantly correlate with height, weight, or body mass index in our sample (P > .05). CONCLUSION: These results suggest that preoperative US imaging of the hamstring tendons is unreliable in predicting intraoperative graft diameter.
ABSTRACT
BACKGROUND: The processing of allograft tissues in anterior cruciate ligament (ACL) reconstruction continues to be controversial. While high-dose irradiation of grafts has received scrutiny for high failure rates, lower dose irradiation and "proprietary-based" nonirradiated sterilization techniques have become increasingly popular, with little in the literature to evaluate their outcomes. Recent studies have suggested that the specifics of allograft processing techniques may be a risk factor for higher failure rates. PURPOSE: To assess these proprietary processes and their clinical outcomes and biomechanical properties. STUDY DESIGN: Systematic review. METHODS: A systematic review was performed using searches of PubMed, EMBASE, Google Scholar, and Cochrane databases. English-language studies were identified with the following search terms: "allograft ACL reconstruction" (title/abstract), "novel allograft processing" (title/abstract), "allograft anterior cruciate ligament" (title/abstract), "anterior cruciate ligament allograft processing" (title/abstract), or "biomechanical properties anterior cruciate ligament allograft" (title/abstract). Duplicate studies, studies not providing the allograft processing technique, and those not containing the outcomes of interest were excluded. Outcomes of interest included outcome scores, complication and failure rates, and biomechanical properties of the processed allografts. RESULTS: Twenty-four studies (13 clinical, 11 biomechanical) met inclusion criteria for review. No demonstrable difference in patient-reported outcomes was appreciated between the processing techniques, with the exception of the Tutoplast process. The clinical failure rate of the Tutoplast process was unacceptably high (45% at 6 years), but no other difference was found between other processing techniques (BioCleanse: 5.4%; AlloTrue: 5.7%; MTF: 6.7%). Several studies did show an increased failure rate, but these studies either combined processing techniques or failed to delineate enough detail to allow a specific comparison for this study. The biomechanical studies showed overall maintenance of satisfactory biomechanical properties throughout multiple testing modes with normalization to the percentage of control specimens. CONCLUSION: A comparison of proprietary allograft processing techniques is difficult because of the variability and lack of specificity of reporting in the current literature. Among the available literature, except for the Tutoplast process, no notable differences were found in the clinical outcomes or biomechanical properties. Future study with a longer follow-up is necessary to determine the role and limitations of these grafts in the clinical setting.
Subject(s)
Allografts , Anterior Cruciate Ligament Injuries/surgery , Anterior Cruciate Ligament Reconstruction/methods , Biomechanical Phenomena , Humans , Risk Factors , Sterilization/methods , Transplantation, Homologous , Treatment OutcomeABSTRACT
BACKGROUND: The biceps labral complex has received much interest in recent years as a source of shoulder pain. Magnetic resonance imaging (MRI) is the imaging modality of choice for those patients with a suspected superior labrum anterior-posterior (SLAP) tear. The goal of this study was to look at the accuracy of MRI without arthrography to correctly identify SLAP tears. METHODS: The study had a prospective, case-based, case-control design. Participants were consecutive patients seen at an orthopaedic outpatient clinic who received an MRI scan as part of their diagnostic cycle. All patients were aged at least 18 years, with various shoulder dysfunctions (impingement, rotator cuff tear, and so on) that were evaluated during a routine clinical evaluation. Arthroscopic surgery was performed as the reference standard for a SLAP lesion. RESULTS: Seventy-seven patients were evaluated during arthroscopic surgery. The pretest probability of a SLAP lesion-only diagnosis was 18.2%, and for a SLAP lesion with or without a concomitant diagnosis, the pretest probability was 66.2%. In both cases, use of MRI led to post-test probability values that were worse when a positive finding was identified on the MRI scan. DISCUSSION: The results of this study suggest that SLAP tears are often incorrectly diagnosed based on MRI evaluation, with MRI providing a high level of sensitivity and low level of specificity. On the basis of the results of this study, conventional MRI is not a suitable test to accurately evaluate the biceps labral complex for the presence of a SLAP tear.
Subject(s)
Magnetic Resonance Imaging , Shoulder Injuries , Shoulder Joint/pathology , Adult , Case-Control Studies , Female , Humans , Magnetic Resonance Imaging/methods , Male , Middle Aged , Prospective Studies , Reproducibility of ResultsABSTRACT
BACKGROUND: The clinical diagnosis of a superior labral anterior posterior (SLAP) tear is extremely challenging. Most studies that advocate selected tests have errors in study design or significant bias, or both. The purpose of this study was to identify the diagnostic utility of the Active Compression/O'Brien's test, Biceps Load II test, Dynamic Labral Shear test (O'Driscoll's test), Speed's test, and the Labral Tension test when diagnosing isolated SLAP lesions (SLAP-only) and a SLAP lesion with concomitant disorders (eg, rotator cuff tear), as stand-alone and clustered tests, with diagnostic confirmation by arthroscopic surgery. MATERIALS AND METHODS: This diagnostic accuracy study was a case-based, case-control design that included 87 individuals with variable shoulder pathology. RESULTS: Of the 5 tests, only the Biceps Load II test demonstrated utility in identifying patients with a SLAP-only lesion, with a positive predictive value of 26 (95% confidence limits [CL], 18, 31), negative predictive value of 93 (95% CL, 84, 97), positive likelihood ratio of 1.7 (95% CL, 1.1, 2.6), and negative likelihood ratio of 0.39 (95% CL, 0.14, 0.91). No tests demonstrated diagnostic utility when diagnosing any SLAP lesion, including those with concomitant diagnoses. No clusters demonstrated better diagnostic accuracy than stand-alone findings. CONCLUSION: There are a number of potential reasons for the poor utility in the 5 test findings. The heterogeneous sample included patients with a variety of shoulder disorders. The study was organized using very strict methodologic controls that should reduce the risk of bias, which normally overinflates the accuracy of a specific tool. The findings may truly reflect the stand-alone, diagnostic utility of the 5 tests, suggesting when used alone provides little usefulness toward decision making of the diagnostic clinician.
Subject(s)
Arthroscopy/methods , Joint Diseases/diagnosis , Physical Examination/methods , Shoulder Joint , Adult , Diagnosis, Differential , Female , Follow-Up Studies , Humans , Joint Diseases/physiopathology , Male , Middle Aged , Predictive Value of Tests , Prospective Studies , Range of Motion, Articular , Reproducibility of ResultsABSTRACT
Controversy remains regarding the surgical treatment of cubital tunnel syndrome. Similar outcomes with ulnar nerve transposition, both subcutaneous and submuscular, and simple decompression have recently been reported. We describe an endoscopically assisted cubital tunnel release through a 2-cm incision using readily available standard equipment. Seventeen of 21 procedures successfully alleviated symptoms of cubital tunnel syndrome in these patients. Four patients who developed ulnar nerve subluxation intraoperatively who were treated with medial epicondylectomy failed to experience relief of symptoms and were successfully treated with anterior submuscular transposition. Patients with more profound motor weakness and/or electrodiagnostic studies had less complete relief of symptoms.
Subject(s)
Arthroscopy/methods , Cubital Tunnel Syndrome/surgery , Decompression, Surgical/methods , Ulnar Nerve/pathology , Adult , Aged , Cohort Studies , Cubital Tunnel Syndrome/diagnosis , Decompression, Surgical/adverse effects , Endoscopy/methods , Female , Humans , Male , Middle Aged , Nerve Regeneration/physiology , Postoperative Complications/physiopathology , Prognosis , Range of Motion, Articular/physiology , Recovery of Function , Retrospective Studies , Risk Assessment , Severity of Illness Index , Ulnar Nerve/surgeryABSTRACT
OBJECTIVE: To compare the mechanical stability of a fixed-angle blade plate with that of a locking plate in a cadaveric proximal humerus fracture-fixation model subjected to cyclic loading. A secondary objective was to evaluate whether the use of synthetic humerus specimens would replicate significant differences found during cadaveric tests. DESIGN: Mechanical evaluation of constructs in bending and torsion. SETTING: Biomechanical laboratory in an academic medical center. METHODS: Simulated humeral neck fractures (Orthopaedic Trauma Association (OTA) classification 11A3), in matched-pair cadaveric and synthetic specimens underwent fixation using either a 3.5-mm, 90-degree cannulated LC-Angled Blade Plate or a 3.5-mm LCP Proximal Humerus Locking Plate. Cadaveric specimen constructs were cyclically loaded in bending and torsion; synthetic specimens were tested in torsion. MAIN OUTCOME MEASURE: Humeral shaft-bending displacements and angular rotations for respective cyclic bending loads and axial torques were recorded and compared at repeated cyclic intervals to evaluate construct loosening. RESULTS: Locking-plate constructs exhibited significantly less loosening than blade-plate constructs for torsional loading in cadaveric specimens (P = 0.036). The two types of constructs performed similarly for torsional loading in synthetic specimens (P = 0.100). Under cyclic, closed-bending load conditions in which the plates served as tension members, both types of constructs performed similarly in cadaveric specimens (P = 0.079). CONCLUSIONS: For simulated humeral neck fractures subjected to cyclic loading, locking-plate constructs demonstrated significantly greater torsional stability and similar bending stability to blade plates in a cadaveric specimen model. In contrast, these same constructs performed similarly with torsional loading when using synthetic humerus specimens. These results indicate potential advantages for locking-plate fixation. They also indicate that the synthetic specimens tested may not be appropriate for evaluating fixation stability in the humeral head, where cancellous bone fixation predominates.