Atomically dispersed dinuclear iridium active sites for efficient and stable electrocatalytic chlorine evolution reaction.

The electrochemical chlorine evolution reaction (CER) is a critical anode reaction in chlor-alkali electrolysis. Although precious metal-based mixed metal oxides (MMOs) have long been used as CER catalysts, they suffer from high cost and poor selectivity due to the competing oxygen evolution reaction (OER). Single-atom catalysts (SACs), featuring high atom utilization efficiency, have captured widespread interest in diverse applications. However, the single-atom sites in SACs are generally recognized as independent motifs and the interplay of adjacent sites is largely overlooked. Herein, we report a "precursor-preselected" cage-encapsulated strategy to synthesize atomically dispersed dinuclear iridium active sites bridged by oxygen that are supported on nitrogen-doped carbon (Ir2-ONC). The dinuclear Ir2-ONC catalyst exhibits a CER onset potential of 1.375 V vs. normal hydrogen electrode, a high faradaic efficiency of >95%, and a high mass activity of 14321.6 A gIr -1, much better than the Ir SACs, which demonstrates the significance of coordination and electronic structure regulation for atomically dispersed catalysts. Density functional theory calculations and ab initio molecular dynamics simulations confirm that the unique dinuclear structure facilitates Cl- adsorption, resulting in improved catalytic CER performance.

Stabilization of the Active Ruthenium Oxycarbonate Phase for Low-Temperature CO2 Methanation.

Interstitial carbon-doped RuO2 catalyst with the newly reported ruthenium oxycarbonate phase is a key component for low-temperature CO2 methanation. However, a crucial factor is the stability of interstitial carbon atoms, which can cause catalyst deactivation when removed during the reaction. In this work, the stabilization mechanism of the ruthenium oxycarbonate active phase under reaction conditions is studied by combining advanced operando spectroscopic tools with catalytic studies. Three sequential processes: carbon diffusion, metal oxide reduction, and decomposition of the oxycarbonate phase and their influence by the reaction conditions, are discussed. We present how the reaction variables and catalyst composition can promote carbon diffusion, stabilizing the oxycarbonate catalytically active phase under steady-state reaction conditions and maintaining catalyst activity and stability over long operation times. In addition, insights into the reaction mechanism and a detailed analysis of the catalyst composition that identifies an adequate balance between the two phases, i.e., ruthenium oxycarbonate and ruthenium metal, are provided to ensure an optimum catalytic behavior.

Low-temperature hydroformylation of ethylene by phosphorous stabilized Rh sites in a one-pot synthesized Rh-(O)-P-MFI zeolite.

Zeolites containing Rh single sites stabilized by phosphorous were prepared through a one-pot synthesis method and are shown to have superior activity and selectivity for ethylene hydroformylation at low temperature (50 °C). Catalytic activity is ascribed to confined Rh2O3 clusters in the zeolite which evolve under reaction conditions into single Rh3+ sites. These Rh3+ sites are effectively stabilized in a Rh-(O)-P structure by using tetraethylphosphonium hydroxide as a template, which generates in situ phosphate species after H2 activation. In contrast to Rh2O3, confined Rh0 clusters appear less active in propanal production and ultimately transform into Rh(I)(CO)2 under similar reaction conditions. As a result, we show that it is possible to reduce the temperature of ethylene hydroformylation with a solid catalyst down to 50 °C, with good activity and high selectivity, by controlling the electronic and morphological properties of Rh species and the reaction conditions.

Mercury speciation in selenium enriched wheat plants hydroponically exposed to mercury pollution.

Mercury (Hg) pollution in agricultural soils and its potential pathway to the human food chain can pose a serious health concern. Understanding the pathway of Hg in plants and how the speciation may change upon interaction with other elements used for biofortification can be critical to assess the real implications for the final plant-based product. In that respect, selenium (Se) biofortification of crops grown in Se-poor soil regions is becoming a common practice to overcome Se deficient diets. Therefore, it is important to assess the interplay between these two elements since Se may form complexes with Hg reducing its bioavailability and toxicity. In this work, the speciation of Hg in wheat plants grown hydroponically under the presence of Hg (HgCl2) and biofortified with Se (selenite, selenate, or a 1:1 mixture of both) has been investigated by X-ray absorption spectroscopy at the Hg L3-edge. The main Hg species found in wheat grains was the highly toxic methylmercury. It was found that the Se-biofortification of wheat did not prevent, in general, the Hg translocation to grains. Only the 1:1 mixture treatment seemed to have an effect in reducing the levels of Hg and the presence of methylmercury in grains.

Li iontronics in single-crystalline T-Nb2O5 thin films with vertical ionic transport channels.

The niobium oxide polymorph T-Nb2O5 has been extensively investigated in its bulk form especially for applications in fast-charging batteries and electrochemical (pseudo)capacitors. Its crystal structure, which has two-dimensional (2D) layers with very low steric hindrance, allows for fast Li-ion migration. However, since its discovery in 1941, the growth of single-crystalline thin films and its electronic applications have not yet been realized, probably due to its large orthorhombic unit cell along with the existence of many polymorphs. Here we demonstrate the epitaxial growth of single-crystalline T-Nb2O5 thin films, critically with the ionic transport channels oriented perpendicular to the film's surface. These vertical 2D channels enable fast Li-ion migration, which we show gives rise to a colossal insulator-metal transition, where the resistivity drops by 11 orders of magnitude due to the population of the initially empty Nb 4d0 states by electrons. Moreover, we reveal multiple unexplored phase transitions with distinct crystal and electronic structures over a wide range of Li-ion concentrations by comprehensive in situ experiments and theoretical calculations, which allow for the reversible and repeatable manipulation of these phases and their distinct electronic properties. This work paves the way for the exploration of novel thin films with ionic channels and their potential applications.

Low-oxidation-state Ru sites stabilized in carbon-doped RuO2 with low-temperature CO2 activation to yield methane.

The generation of methane fuel using surplus renewable energy with CO2 as the carbon source enables both the decarbonization and substitution of fossil fuel feedstocks. However, high temperatures are usually required for the efficient activation of CO2. Here we present a solid catalyst synthesized using a mild, green hydrothermal synthesis that involves interstitial carbon doped into ruthenium oxide, which enables the stabilization of Ru cations in a low oxidation state and a ruthenium oxycarbonate phase to form. The catalyst shows an activity and selectivity for the conversion of CO2 into methane at lower temperatures than those of conventional catalysts, with an excellent long-term stability. Furthermore, this catalyst is able to operate under intermittent power supply conditions, which couples very well with electricity production systems based on renewable energies. The structure of the catalyst and the nature of the ruthenium species were acutely characterized by combining advanced imaging and spectroscopic tools at the macro and atomic scales, which highlighted the low-oxidation-state Ru sites (Run+, 0 < n < 4) as responsible for the high catalytic activity. This catalyst suggests alternative perspectives for materials design using interstitial dopants.

Accumulated Lattice Strain as an Intrinsic Trigger for the First-Cycle Voltage Decay in Li-Rich 3d Layered Oxides.

Li- and Mn-rich layered oxides (LMLOs) are promising cathode materials for Li-ion batteries (LIBs) owing to their high discharge capacity of above 250 mA h g-1. A high voltage plateau related to the oxidation of lattice oxygen appears upon the first charge, but it cannot be recovered during discharge, resulting in the so-called voltage decay. Disappearance of the honeycomb superstructure of the layered structure at a slow C-rate (e.g., 0.1 C) has been proposed to cause the first-cycle voltage decay. By comparing the structural evolution of Li[Li0.2Ni0.2Mn0.6]O2 (LLNMO) at various current densities, the operando synchrotron-based X-ray diffraction results show that the lattice strain in bulk LLNMO is continuously increased over cycling, resulting in the first-cycle voltage loss upon Li-ion insertion. Unlike the LLNMO, the accumulated average lattice strain of LiNi0.8Co0.1Mn0.1O2 (NCM811) and LiNi0.6Co0.2Mn0.2O2 (NCM622) from the open-circuit voltage to 4.8 V could be released on discharge. These findings help to gain a deep understanding of the voltage decay in LMLOs.

Synchrotron radiation based operando characterization of battery materials.

Synchrotron radiation based techniques are powerful tools for battery research and allow probing a wide range of length scales, with different depth sensitivities and spatial/temporal resolutions. Operando experiments enable characterization during functioning of the cell and are thus a precious tool to elucidate the reaction mechanisms taking place. In this perspective, the current state of the art for the most relevant techniques (scattering, spectroscopy, and imaging) is discussed together with the bottlenecks to address, either specific for application in the battery field or more generic. The former includes the improvement of cell designs, multi-modal characterization and development of protocols for automated or at least semi-automated data analysis to quickly process the huge amount of data resulting from operando experiments. Given the recent evolution in these areas, accelerated progress is expected in the years to come, which should in turn foster battery performance improvements.

Investigating the local structure of Ti based MXene materials by temperature dependent X-ray absorption spectroscopy.

The local structures of Ti based MXene-type electrode materials have been studied by Ti K-edge X-ray absorption fine structure measurements as a function of temperature to obtain direct information on the local bond lengths and their stiffness. In particular, the parent MAX phases Ti2AlC and Ti3AlC2 and their etched MXene systems are characterized and their properties compared. We find that selective etching has a substantial effect on the local structural properties of the Ti based MXene materials. It leads to an increase in the interatomic distances, i.e. a decrease in the covalency, and corresponding bond stiffness, that is a likely cause of higher achievable performances. The obtained results underline the importance of the local atomic correlations as limiting factors in the diffusion capacity of ion batteries.

Lix(C5H5N)yFe2-zSe2: A Defect-Resilient Expanded-Lattice High-Temperature Superconductor.

Two-dimensional iron chalcogenide intercalates display a remarkable correlation of the interlayer spacing with enhancement of the superconducting critical temperature (Tc). In this work, synchrotron X-ray absorption (XAS; at the Fe and Se K-edges) and emission (XES; at the Fe Κß) spectroscopies allow one to discuss how the important rise of Tc (∼44 K) in the molecule-intercalated Lix(C5H5N)yFe2-zSe2 relates to the electronic and local structural changes felt by the inorganic host upon doping (x). XES shows that widely separated layers of edge-sharing FeSe4 tetrahedra carry low-spin moieties, with a local Fe magnetic moment slightly reduced compared to the parent ß-Fe2-zSe2. Pre-edge XAS expresses the progressively reduced mixing of metal 3d-4p states upon lithiation. Doping-mediated local lattice modifications, probed by conventional Tc optimization measures (cf. the anion height and FeSe4 tetrahedra regularity), become less relevant when layers are spaced far away. On the basis of extended X-ray absorption fine structure, such distortions are compensated by a softer Fe network that relates to Fe-site vacancies, alleviating electron-lattice correlations and superconductivity. Density functional theory (DFT) guided modification of the isolated Fe2-zSe2 (z, vacant sites) planes, resembling the host layers, identify that Fe-site deficiency occurs at low energy cost, giving rise to stretched Fe sheets, in accordance with experiments. The robust high-Tc in Lix(C5H5N)yFe2-zSe2, arises from the interplay of electron-donating spacers and the iron selenide layer's tolerance to defect chemistry, a tool to favorably tune its Fermi surface properties.

Decoupling the adsorption mechanisms of arsenate at molecular level on modified cube-shaped sponge loaded superparamagnetic iron oxide nanoparticles.

In this study, a commercial cube-shaped open-celled cellulose sponge adsorbent was modified by in-situ co-precipitation of superparamagnetic iron oxide nanoparticles (SPION) and used to remove As(V) from aqueous solutions. Fe K-edge X-ray absorption spectroscopy (XAS) and TEM identified maghemite as the main iron phase of the SPION nanoparticles with an average size 13 nm. Batch adsorption experiments at 800 mg/L showed a 63% increase of adsorption capacity when loading 2.6 wt.% mass fraction of SPION in the cube-sponge. Experimental determination of the adsorption thermodynamic parameters indicated that the As(V) adsorption on the composite material is a spontaneous and exothermic process. As K-edge XAS results confirmed that the adsorption enhancement on the composite can be attributed to the nanoparticles loaded. In addition, adsorbed As(V) did not get reduced to more toxic As(III) and formed a binuclear corner-sharing complex with SPION. The advantageous cube-shape of the sponge-loaded SPION composite together with its high affinity and good adsorption capacity for As(V), good regeneration capability and the enhanced-diffusion attributed to its open-celled structure make this adsorbent a good candidate for industrial applications.

Redox Interaction between Selenite and Mackinawite in Cement Pore Water.

In cement-rich radioactive waste repositories, mackinawite (FeS) forms at the steel corrosion interface within reinforced concrete and potentially retards the transport of redox-sensitive radionuclides (e.g., 79Se) in porous cement media. Redox interactions between selenite and mackinawite under hyperalkaline conditions remain unclear and require further investigations. Here, using comprehensive characterization on both aqueous and solid speciation, we successfully monitored the whole interaction process between selenite and mackinawite under hyperalkaline conditions. The results show similar chemical environments for SeO32- and S2-/Sn2- at the mackinawite-water interface, verifying an immediate reduction. After 192 h of reaction, SeO32- was reduced to solid Se0 and SeS2 species, accompanied by the oxidation of S2-/Sn2- to S2O32- and Fe(II) to Fe(III) in mackinawite. Aqueous speciation results showed that ∼99% of aqueous selenium was present as Se4S nanoparticles due to the dissolution of Se from the solid. In parallel, ∼62% of S2-/Sn2- was released into the solution, with mackinawite transforming into magnetite, Fe(OH)3 and FeS2O3+ complexed to Cl- or OH- species, and magnetite subsequently dispersed in the solution. This study provides valuable data about the retardation mechanisms of redox-sensitive radionuclides by soluble iron sulfides, which is critical to advance our understanding of reactive concrete barriers used in nuclear waste disposal systems.

Enhanced arsenite removal by superparamagnetic iron oxide nanoparticles in-situ synthesized on a commercial cube-shape sponge: adsorption-oxidation mechanism.

HYPOTHESIS: The easy aggregation of superparamagnetic iron oxide nanoparticles (SPION) greatly reduces their adsorption performance for removing arsenic (As) from polluted water. We propose to exploit the porosity and good diffusion properties of a cube-shaped cellulose sponge for loading SPION to reduce the aggregation and to develop a composite adsorbent in the cm-scale that could be used for industrial applications. EXPERIMENTS: SPION were in-situ synthesized by co-precipitation using a commercial cube-shaped sponge (MetalZorb®) as support. The morphology, iron-oxide phase, adsorption performance and thermodynamic parameters of the composite adsorbent were determined to better understand the adsorption process. X-ray absorption spectroscopy (XAS) was used to investigate the chemical state of the adsorbed As(III). FINDINGS: The adsorption of the supported SPION outperforms the unsupported SPION (ca. 14 times higher adsorption capacity). The modelling of the adsorption isotherms and the kinetic curves indicated that chemisorption is controlling the adsorption process. The thermodynamic analysis shows that the adsorption retains the spontaneous and endothermic character of the unsupported SPION. The XAS results revealed an adsorption-oxidation mechanism in which the adsorbed As(III) was partially oxidized to less toxic As(V) by the hydroxyl free radical (•OH) generated from Fe(III) species and by the hydroxyl groups.

Opportunities and challenges of applying advanced X-ray spectroscopy to actinide and lanthanide N-donor ligand systems.

N-donor ligands such as n-Pr-BTP [2,6-bis(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine] preferentially bind trivalent actinides (An3+) over trivalent lanthanides (Ln3+) in liquid-liquid separation. However, the chemical and physical processes responsible for this selectivity are not yet well understood. Here, an explorative comparative X-ray spectroscopy and computational (L3-edge) study for the An/Ln L3-edge and the N K-edge of [An/Ln(n-Pr-BTP)3](NO3)3, [Ln(n-Pr-BTP)3](CF3SO3)3 and [Ln(n-Pr-BTP)3](ClO4)3 complexes is presented. High-resolution X-ray absorption near-edge structure (HR-XANES) L3-edge data reveal additional features in the pre- and post-edge range of the spectra that are investigated using the quantum chemical codes FEFF and FDMNES. X-ray Raman spectroscopy studies demonstrate the applicability of this novel technique for investigations of liquid samples of partitioning systems at the N K-edge.

Continuous Carbon Channels Enable Full Na-Ion Accessibility for Superior Room-Temperature Na-S Batteries.

Porous carbon has been widely used as an efficient host to encapsulate highly active molecular sulfur (S) in Li-S and Na-S batteries. However, for these sub-nanosized pores, it is a challenge to provide fully accessible sodium ions with unobstructed channels during cycling, particularly for high sulfur content. It is well recognized that solid interphase with full coverage over the designed architectures plays critical roles in promoting rapid charge transfer and stable conversion reactions in batteries, whereas constructing a high-ionic-conductivity solid interphase in the pores is very difficult. Herein, unique continuous carbonaceous pores are tailored, which can serve as multifunctional channels to encapsulate highly active S and provide fully accessible pathways for sodium ions. Solid sodium sulfide interphase layers are also realized in the channels, showing high Na-ion conductivity toward stabilizing the redox kinetics of the S cathode during charge/discharge processes. This systematically designed carbon-hosted sulfur cathode delivers superior cycling performance (420 mAh g-1 at 2 A g-1 after 2000 cycles), high capacity retention of ≈90% over 500 cycles at current density of 0.5 A g-1 , and outstanding rate capability (470 mAh g-1 at 5 A g-1 ) for room-temperature sodium-sulfur batteries.

The rise of X-ray spectroscopies for unveiling the functional mechanisms in batteries.

Synchrotron-based techniques have been key tools in the discovery, understanding, and development of battery materials. In this review, some of the most suitable X-ray spectroscopy related techniques employed for addressing diverse scientific cases connected to battery science are highlighted. Furthermore, current shortcomings, intrinsic limitations, and ongoing challenges of individual techniques are pointed out, providing an outlook of future trends that are relevant to the battery research community. In particular, the ongoing development of next generation synchrotrons, machine learning algorithms for data analysis and combined theoretical/experimental approaches will enhance the already powerful assets of these advanced spectroscopic methods.

MAP2XANES: a Jupyter interactive notebook for elemental mapping and XANES speciation.

MAP2XANES is an intuitive Jupyter notebook that automatizes the analysis of synchrotron X-ray fluorescence imaging and X-ray absorption spectroscopy for the characterization of complex and heterogeneous samples. The notebook uses basic modules and functions from Numpy, Scipy, Pandas, iPywidgets and Matplotlib libraries for a powerful data reduction process that, in just a few clicks, guides the user through the visualization of elemental maps, space-resolved absorption spectra and their automatized analysis. In particular, by means of linear combination fit of the XANES spectra, the notebook determines the chemical species distribution in the sample under investigation. The direct output of the analysis process is the correlation between the different elemental distributions and the spatial localization of the chemical species detected. An application to mineralogy is thus presented, analyzing the Mn2+, Mn3+ and Mn4+ distribution in a mineral sample of hausmannite (Mn2+Mn23+O4), courtesy of the Museum of Natural Science of Barcelona.

Influence of Silica Coatings on Magnetite-Catalyzed Selenium Reduction.

The reactivity of iron(II/III) oxide surfaces may be influenced by their interaction with silica, which is ubiquitous in aquatic systems. Understanding the structure-reactivity relationships of Si-coated mineral surfaces is necessary to describe the complex surface behavior of nanoscale iron oxides. Here, we use Si-adsorption isotherms and Fourier transform infrared spectroscopy to analyze the sorption and polymerization of silica on slightly oxidized magnetite nanoparticles (15% maghemite and 85% magnetite, i.e., ∼2 maghemite surface layers), showing that Si adsorption follows a Langmuir isotherm up to 2 mM dissolved Si, where surface polymerization occurs. Furthermore, the effects of silica surface coatings on the redox-catalytic ability of magnetite are analyzed using selenium as a molecular probe. The results show that for partially oxidized nanoparticles and even under different Si surface coverages, electron transfer is still occurring. The results indicate anion exchange between silicate and the sorbed SeIV and SeVI. X-ray absorption near-edge structure analyses of the reacted Se indicate the formation of a mixed selenite/Se0 surface phase. We conclude that neither partial oxidation nor silica surface coatings block the sorption and redox-catalytic properties of magnetite nanoparticles, a result with important implications to assess the reactivity of mixed-valence phases in environmental settings.

Local Interactions Governing the Performances of Lithium- and Manganese-Rich Cathodes.

The local structural and electronical transformations occurring along the first charge and discharge cycle of Li- and Mn-rich Li[Li0.2Ni0.16Mn0.56Co0.08]O2 cathode material have been characterized by X-ray absorption spectroscopy at several complementary edges. The irreversible spinel formation, occurring at the expenses of the cycling layered phase during the first charge, is quantified (about 10%) and spatially localized. The local strains induced by the Ni oxidation have been evaluated. They induce the formation of a low spin Mn3+ in the layered structure in parallel to the irreversible formation of the spinel phase in the particles bulk. The charge balance has been quantified for all the elements along the first charging cycle, confirming a reversible oxygen oxidation along the charge. Overall, these quantitative results provide an experimental basis for modeling aimed to control the structure and its evolution, for instance, hindering the spinel formation for the benefit of the material cycle life.