Ecological weed management and square planting influenced the weed management, and crop productivity in direct-seeded rice.

Herbicide use may pose a risk of environmental pollution or evolution of resistant weeds. As a result, an experiment was carried out to assess the influence of different non-chemical weed management tactics (one hoeing (HH) at 12 DAS followed by (fb) one hand weeding at 30 DAS, one HH at 12 DAS fb Sesbania co-culture and its mulching, one HH at 12 DAS fb rice straw mulching @ 4t ha-1, one HH at 12 DAS fb rice straw mulching @ 6 t ha-1) on weed control, crop growth and yield, and economic returns in direct-seeded rice (DSR). Experiment was conducted during kharif season in a split-plot design and replicated thrice. Zero-till seed drill-sown crop (PN) had the lowest weed density at 25 days after sowing (DAS), while square planting geometry (PS) had the lowest weed density at 60 DAS. PS also resulted in a lower weed management index (WMI), agronomic management index (AMI), and integrated weed management index (IWMI), as well as higher growth attributes, grain yield (4.19 t ha-1), and net return (620.98 US$ ha-1). The cultivar Arize 6444 significantly reduced weed density and recorded higher growth attributes, yield, and economic return. In the case of weed management treatments, one HH at 12 DAS fb Sesbania co-culture and its mulching had the lowest weed density, Shannon-weinner index and eveness at 25 DAS. However, one hoeing at 12 DAS fb one hand weeding at 30 DAS (HH + WH) achieved the highest grain yield (4.85 t ha-1) and net returns (851.03 US$ ha-1) as well as the lowest weed density at 60 DAS. PS × HH + WH treatment combination had the lowest weed persistent index (WPI), WMI, AMI, and IWMI, and the highest growth attributes, production efficiency, and economic return.

Molecular insights into Pashmina fiber production: comparative skin transcriptomic analysis of Changthangi goats and sheep.

Ladakh, one of the highest inhabited regions globally, hosts the unique Changthangi goat, renowned for producing Pashmina, the world's most luxurious natural fiber. In comparison, the fiber derived from Changthangi sheep is considered next only to Pashmina. This research endeavors to compare the skin transcriptome profiles of Changthangi goats and Changthangi sheep, aiming to discern the molecular determinants behind the recognition of Changthangi goats as the source of Pashmina. Drawing upon previously conducted studies, a collective of 225 genes correlated with fiber characteristics were extracted from the differentially expressed genes noticed between the two species (p-value of ≤ 0.05 and a log2 fold change of ≥ 1.5). These genes were analyzed using DAVID software to understand their biological functions and to identify enriched KEGG and Reactome pathways. The protein-protein interaction networks were constructed using Cytoscape, cytoHubba, and STRING to focus on key genes and infer their biological significance. Comparative transcriptome analysis revealed significantly higher expression of genes involved in signaling pathways like Wnt, MAPK, PI3K-Akt, Hedgehog, associated with fiber development and quality in Changthangi goats. These pathways play crucial roles in hair follicle (HF) formation, maintenance of epidermal stem cells, and fiber characteristics. Findings also highlight the enrichment of cell adhesion molecules and ECM-receptor interaction, emphasizing their roles in HF structure, growth, and signaling. This investigation offers an in-depth understanding of the molecular intricacies governing Pashmina production in Changthangi goats, providing valuable insights into their unique genetic makeup and underlying mechanisms influencing the exceptional quality of Pashmina fibers.

Technical NEMA NU2-2018 Performance Assessment of Time-of-Flight-Integrated Digital PET-CT System.

Aim The objective of this study includes the NEMA (National Electrical Manufacturer Association) NU2-2018 performance evaluation of the uMIvista PET-CT (positron emission tomography-computed tomography) system. Methods The latest NEMA NU2-2018 guidelines have been followed for the evaluation of performance parameters of this PET-CT scanner: axial, tangential, and radial spatial resolution, sensitivity, counting losses, scatter, randomness, random and counting loss correction, image quality, time and energy resolution, image uniformity, and image registration alignment post installation of country first uMIvista PET-CT. Results The measured NEMA sensitivity of the uMIvista PET scanner was 12.053 cps/kBq. The spatial resolutions of the PET were measured as tangential, radial, and transaxial spatial resolutions at 10 mm, with 3.01 mm, 2.95 mm, and 2.93 mm, respectively; at 100 mm, with 3.17 mm, 3.42 mm, and 3.05 mm, respectively; and at 200 mm, with 3.65 mm, 4.54 mm, and 3.17 mm, respectively, at full-width half-maximum (FWHM); while at full-width tenths-maximum (FWTM), the values at 10 mm were 5.79 mm, 5.57 mm, and 5.69 mm, respectively, and at 100 mm were 5.59 mm, 5.96 mm, and 5.91 mm, respectively. The measured time-of-flight (TOF) timing resolution was 302.294 ps and the measured energy resolution was 11.76% with FWHM and FWTM. Conclusion The NEMA NU2-2018 performances of this TOF-integrated digital PET-CT system are extremely good in all parameters.

Hail the HACOR as a Customized Indian Weaning Score!

Singh MK. Hail the HACOR as a Customized Indian Weaning Score! Indian J Crit Care Med 2024;28(3):198-199.

Vortex flow induced self-assembly in CsPbI3 rods leads to an improved electrical response towards external analytes.

We present a facile and versatile strategy for enabling CsPbI3 rods to self-assemble at an air-water interface. The CsPbI3 rods, which float at the air-water interface, align under the influence of the rotational flow field due to the vortex motion of a water subphase. The aligned CsPbI3 rods could be transferred onto various substrates without involving any sophisticated instrumentation. The temperature of the subphase, the concentration of the CsPbI3 aliquot, the rotational speed inducing vortex motion, and the lift-off position and angle of the substrate were optimized to achieve high coverage of the self-assembled rods of CsPbI3 on glass. The Rietveld refinement of the XRD profile confirms that the aligned CsPbI3 is in the pure orthorhombic phase ascribed to the Pnma space group. The hydrophilic carboxylic group of the oleic acid attaches to the Pb atoms of the halide perovskite rods, while their hydrophobic tails encapsulate the rods within their shell, creating a shielding barrier between the water and the perovskite surface like a reverse micelle. The aligned CsPbI3 rods exhibit a nearly 47-fold increment in current upon exposure to ammonia gas (amounting to 5.6 times higher sensitivity in ammonia sensing) compared to the non-aligned CsPbI3 rods.

Comprehensive evaluation and validation of optimal reference genes for normalization of qPCR data in different caprine tissues.

BACKGROUND: Quantitative real-time PCR (qPCR) is a highly reliable method for validating gene expression data in molecular studies due to its sensitivity, specificity, and efficiency. To ensure accurate qPCR results, it's essential to normalize the expression data using stable reference genes. METHODS: This study aimed to identify suitable reference genes for qPCR studies in goats by evaluating 18 candidate reference genes (ACTB, BACH1, B2M, GAPDH, HMBS, HPRT1, PGK1, PPIA, PPIB, RPLP0, RPL19, RPS9, RPS15, RPS28, SDHA, TBP, UXT, and YWHAZ) in 10 different caprine tissues (heart, intestine, kidney, liver, lung, muscle, rumen, skin, spleen, and testis). An integrated tool called RefFinder, which incorporates various algorithms like NormFinder, GeNorm, BestKeeper, and ΔCt, was used to assess the stability of expression among these genes. RESULTS: After thorough analysis, ACTB, PPIB, and B2M emerged as the most stable reference genes, while RPL19, RPS15, and RPS9 were found to be the least stable. The suitability of the selected internal control genes was further validated through target gene analysis, confirming their efficacy in ensuring accurate gene expression profiling in goats. CONCLUSION: The study determined that the geometric average of ACTB, PPIB, and B2M creates an appropriate normalization factor for gene expression studies in goat tissues.

Current paradigms in employing self-assembled structures: Drug delivery implications with improved therapeutic potential.

Recent efforts have focused on developing improved drug delivery systems with enhanced therapeutic efficacy and minimal side effects. Micelles, self-assembled from amphiphilic block copolymers in aqueous solutions, have gained considerable attention for drug delivery. However, there is a need to further enhance their efficiency. These micelles offer benefits like biodegradability, biocompatibility, sustained drug release, and improved patient compliance. Yet, researchers must address stability issues and reduce toxicity. Nanoscale self-assembled structures have shown promise as efficient drug carriers, offering an alternative to conventional methods. Fine-tuning at the monomeric and molecular levels, along with structural modifications, is crucial for optimal drug release profiles. Various strategies, such as entrapping hydrophobic drugs and using polyethylene oxide diblock copolymer micelles to resist protein adsorption and cellular adhesion, protect the hydrophobic core from degradation. The polyethylene oxide corona also provides stealth properties, prolonging blood circulation for extended drug administration. Amphiphilic copolymers are attractive for drug delivery due to their adjustable properties, allowing control over micelle size and morphology. Emerging tools promise complex and multifunctional platforms. This article summarizes about the challenges as far as the use of micelles is concerned, including optimizing performance, rigorous pre-clinical and clinical research, and suggests further improvement for drug delivery efficacy.

Harnessing two-dimensional nanomaterials for diagnosis and therapy in neurodegenerative diseases: Advances, challenges and prospects.

Neurodegenerative diseases (NDDs) are specific brain disorders characterized by the progressive deterioration of different motor activities as well as several cognitive functions. Current conventional therapeutic options for NDDs are limited in addressing underlying causes, delivering drugs to specific neuronal targets, and promoting tissue repair following brain injury. Due to the paucity of plausible theranostic options for NDDs, nanobiotechnology has emerged as a promising field, offering an interdisciplinary approach to create nanomaterials with high diagnostic and therapeutic efficacy for these diseases. Recently, two-dimensional nanomaterials (2D-NMs) have gained significant attention in biomedical and pharmaceutical applications due to their precise drug-loading capabilities, controlled release mechanisms, enhanced stability, improved biodegradability, and reduced cell toxicity. Although various studies have explored the diagnostic and therapeutic potential of different nanomaterials in NDDs, there is a lack of comprehensive review addressing the theranostic applications of 2D-NMs in these neuronal disorders. Therefore, this concise review aims to provide a state-of-the-art understanding of the need for these ultrathin 2D-NMs and their potential applications in biosensing and bioimaging, targeted drug delivery, tissue engineering, and regenerative medicine for NDDs.

Facile exfoliation and physicochemical characterization of Thespesia populnea plant leaves based bioplasticizer macromolecules reinforced with polylactic acid biofilms for packaging applications.

Plasticizers are active ingredients added to the polymer to increase its workability. Since synthetic plasticizer is not ecofriendly and toxic in nature, it is a real cause for concern. On this basis, our study focuses on plasticizer extraction from plant-based resources. In this research work, Thespesia populnea leaves are utilized for the isolation of biological macromolecules with a plasticizing effect for biofilm applications. This extraction process is done through solvent extraction, amination, slow pyrolysis, and surface catalysis process. The physico-chemical and microstructural characterization of novel plasticizer particles were studied for the first time. The lower crystallinity index and crystalline size obtained from X-ray diffraction is 50.08 % and 20.45 nm respectively. Energy dispersive spectroscopy, particle sizer analysis, atomic force microscopy, and scanning electron microscopy are used to assess surface morphology of this plasticizer. The thermogram and differential thermal analysis curves give the information about degradation behavior of plasticizers and their thermal stability. The glass transition temperature of the extracted plasticizer is 60.56 °C. The plasticizing effect of the plasticizer is studied through film fabrication of polylactic acid which was blended with the extracted plasticizer. The mechanical property of biofilm was improved with the addition of plasticizer. The elongation break percentage (for 5 % plasticizer 46.12 %) was increased compared to others with moderate tensile strength. However, the tensile and elongation modulus decreases with the increase of plasticizer content. The crystallinity of the PLA film was improved after the plasticization. The thermal stability also increased with 3 % addition of the plasticizer. The isolated plasticizer was soluble in water and its molecular weight ≈380.

Identification and validation of stable reference genes for expression profiling of target genes in diverse ovine tissues.

Quantitative PCR (qPCR) is a widely-used technique for quantifying the expression of target genes across various tissues, as well as under different pathological and physiological conditions. One of the challenges associated with this method is the need to identify optimal reference genes (RGs) that maintain consistent expression levels under diverse experimental settings, thereby ensuring accurate biological interpretation. In this study, we conducted a thorough analysis of 18 candidate RGs (ACTB, BACH1, B2M, GAPDH, HMBS, HPRT1, PGK1, PPIA, PPIB, RPLP0, RPL19, RPS9, RPS15, RPS28, SDHA, TBP, UXT, and YWHAZ) across 10 ovine tissues (muscle, skin, kidney, liver, intestine, rumen, lung, testis, heart, and spleen) obtained from five individual sheep. We aimed to identify genes with stable expression across these tissues. A literature-based survey helped us shortlist candidate genes representing various functional classes from multiple livestock species. We employed four algorithms: geNorm, NormFinder, BestKeeper, and Delta Ct (ΔCt), to rank these genes based on their stability. A consistent trend in the rankings was observed across these different algorithms. RefFinder was then used for a comprehensive ranking, integrating the outputs from the various methods. ACTB, PPIB, BACH1, and B2M emerged as the most stable RGs, while RPS9, RPS15, and PGK1 displayed variable expression. We validated our findings through qPCR analysis of four target genes (ACTN2, CRYAB, DLK1, and TRIM54) in the skin samples from two different sheep breeds. Based on these results, we recommend ACTB, PPIB, BACH1, and B2M as reliable internal control genes for qPCR experiments involving diverse ovine tissues.

Impact of general incidence function on three-strain SEIAR model.

We investigate the behavior of a complex three-strain model with a generalized incidence rate. The incidence rate is an essential aspect of the model as it determines the number of new infections emerging. The mathematical model comprises thirteen nonlinear ordinary differential equations with susceptible, exposed, symptomatic, asymptomatic and recovered compartments. The model is well-posed and verified through existence, positivity and boundedness. Eight equilibria comprise a disease-free equilibria and seven endemic equilibrium points following the existence of three strains. The basic reproduction numbers $ \mathfrak{R}_{01} $, $ \mathfrak{R}_{02} $ and $ \mathfrak{R}_{03} $ represent the dominance of strain 1, strain 2 and strain 3 in the environment for new strain emergence. The model establishes local stability at a disease-free equilibrium point. Numerical simulations endorse the impact of general incidence rates, including bi-linear, saturated, Beddington DeAngelis, non-monotone and Crowley Martin incidence rates.

Operational and Performance Experience with uMI550 Digital PET-CT during Routine Quality Control Procedures.

Introduction The quality control (QC) procedures for positron emission tomography (PET) scanners are covered by National Electrical Manufacturers Association and International Electrotechnical Commission. QC must be carried out at regular intervals according to the specifications of the scanner manufacturer. Daily and weekly QC plays a valuable role in monitoring positron emission tomography (PET) scanner performance changes. This study shares operational and performance experience of QC procedures that do not require a radioactive Ge-68 source to perform daily QC and experience with fluorodeoxyglucose F18 ( 18 F-FDG) as a substitute for germanium-68/sodium-22 (Ge-68/Na-22) source for weekly QC. Method This study was performed on an uMI550 digital positron emission tomography-computed tomography (PET-CT) scanner. In this scanner daily QC checks system temperature and humidity, system count rate, data link status, and voltage. QC was performed at the console control, the position of the scanner table was in the home position pulled out from the gantry, and the room was closed during the quick QC. Weekly full QC check items include look-up table drift, energy drift, time-of-flight status, C-map status, temperature and humidity, and voltage. Weekly full QC was performed with a 18 F-FDG source in a rod phantom source. Results Over 200 daily QC tests without a radioactive source Ge-68 phantom and 50 full weekly QC tests using a 18 F-FDG rod phantom were performed with this scanner according to the manufacturer's instructions and a test report was generated. No daily QC errors or warnings were observed during this period. Conclusion The new approach for the daily PET QC does not expose operators to radiation. This translates into commercial and operational merits with consistent performance and results. Implications for Practice Reduction in radiation exposure to operating staff during QC procedure in PET-CT scanner.

The spectrum and etiologies of lower urinary tract symptoms in postmenopausal women.

Background: Although the prevalence of lower urinary tract symptoms (LUTS) is high in the female population, it is even higher in postmenopausal females. The frequency, severity, and etiology of LUTS vary among populations and individuals. This study aimed to define the characteristics of LUTS in postmenopausal women and their underlying etiologies. Material and methods: Overall, 74 postmenopausal patients presenting with LUTS in the urological outpatient department were included in the study. A detailed evaluation of LUTS and their underlying etiologies was performed. Patients were divided into 2 groups based on age (<65 and ≥65 years), and the variation in different factors was compared across the groups. Variables were compared using the t test and 1-way analysis of variance. Results: Nocturia was the most common symptom (89.2%) followed by frequency (83.8%). Among voiding LUTS, the most common was a weak stream (63.5%). Frequency, nocturia, urgency, urge urinary incontinence (UI), stress UI, and nocturnal enuresis were more common in patients older than 65 years. Urgency and urge UI were recognized to be the most bothersome symptoms by 37% of the study population followed by straining (32%). The mean storage scores, incontinence scores, and quality of life (QoL) scores for patients younger than 65 years and 65 years or older were 6.9 and 8.5 (p < 0.01), 1.8 and 4.1 (p ≤ 0.01), 4.9 and 6.1, respectively. The most common diagnosis was bladder outlet obstruction due to urethral/meatal stenosis (40.5%) followed by an overactive bladder (32.4%), urinary tract infection (10.8%), cystocele (8.1%), urethral prolapse (4.1%), and urethral caruncle (4.1%). Conclusions: Storage LUTS were the most common and increased in both frequency and severity with age. The QoL was also more severely affected in older postmenopausal women. Bladder outlet obstruction due to meatal with or without distal urethral stenosis was the most common underlying cause of LUTS followed by an overactive bladder. Overactive bladder had the most severe impact on patients' QoL among all the etiologies.

Under nonlinear prey-harvesting, effect of strong Allee effect on the dynamics of a modified Leslie-Gower predator-prey model.

In the present study, the effects of the strong Allee effect on the dynamics of the modified Leslie-Gower predator-prey model, in the presence of nonlinear prey-harvesting, have been investigated. In our findings, it is seen that the behaviors of the described mathematical model are positive and bounded for all future times. The conditions for the local stability and existence for various distinct equilibrium points have been determined. The present research concludes that system dynamics are vulnerable to initial conditions. In addition, the presence of several types of bifurcations (e.g., saddle-node bifurcation, Hopf bifurcation, Bogdanov-Takens bifurcation, homoclinic bifurcation) has been investigated. The first Lyapunov coefficient has been evaluated to study the stability of the limit cycle that results from Hopf bifurcation. The presence of a homoclinic loop has been demonstrated by numerical simulation. Finally, possible phase drawings and parametric figures have been depicted to validate the outcomes.

Sequence characterization and comparative expression profile of buffalo WNT10B gene in adult and fetal tissues.

In this study, Wingless-type MMTV (mouse mammary tumor virus) integration site family member (WNT10B) gene was sequence characterized in the Indian water buffalo. Sequence analysis revealed an open reading frame of 1176 nucleotides in buffalo, encoding 391 amino acids long protein. Nineteen nucleotide variations were observed between cattle and buffalo resulting in six amino acid changes. Phylogenetic analysis showed the clustering of ruminant species together. Real-time expression analysis of WNT10B in tissues collected from different organs of fetal and adult buffalo, revealed, the gene being abundantly expressed in the rumen and liver of the fetus. The fetal ovary, heart, kidney, lung, testis and mammary gland showed moderate expression, while in adult tissues, expression was high in the ovary, testis, brain, kidney, small intestine and liver, whereas lower expression was observed in the adult rumen. Significant differences in WNT10B expression levels were found for the brain, small intestine, testes, kidney, heart, rumen, and ovary when adult and fetal tissues were compared. A moderate level of genetic variation was found between cattle and buffalo WNT10B and expression patterns in a variety of tissues in adult buffalo implies that in addition to possible roles in adipogenesis and hematopoiesis, the WNT10B gene might be playing a significant role in other regulatory pathways as well.

Cutaneous Adnexal Tumours: A Study of 395 Cases from a Tertiary Care Hospital.

Background: Cutaneous adnexal tumours (CATs) are one of the commonest clinical presentations in dermatology outpatients. They constitute a subset of skin tumours with a common clinical presentation and variable histological findings. Almost all of them clinically present as a subcutaneous nodule. Depending upon the site and distribution, the clinician can suspect the diagnosis. However, histopathological examination is the gold standard for the definitive diagnosis and proper subtyping of CATs. Aims: The present study is conducted to see the overall spectrum, incidence and distribution of CATs in a large cohort at the tertiary care centre with their clinical profile. Methods: This was a retrospective study in which all the CATs diagnosed over a period of 5 years (2015 to 2019) in a tertiary care hospital were studied. Clinical data were recorded from the histopathology requisition forms. Results: Three hundred and ninety-five cases of CATs were retrieved. Approximately 90% of cases were benign and 10% were malignant. The age of presentation ranged from 8 months to 81 years with male preponderance in all the histological subtypes. The most common site was the head and neck followed by the extremities. Morphologically, the maximum cases showed a differentiation towards sweat glands (44%), followed by sebaceous (29%), follicular (26.5%) and apocrine differentiation (5.3%). Malignant tumours were common in the elderly age group with sebaceous carcinoma being the commonest. Conclusion: CATs comprise of a wide spectrum of tumours occurring in all age groups. Malignant CATs are rare and common in older age groups. Histopathological examination is the gold standard in distinguishing between the different subtypes.

Production of MSTN Gene-Edited Embryos of Buffalo Using the CRISPR/Cas9 System and SCNT.

The clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 system and somatic cell nuclear transfer (SCNT) have been used to produce genome-edited farm animal species for improved production and health traits; however, these tools are rarely used in the buffalo and can play a pivotal role in milk and meat production in tropical and subtropical countries. In this study, we aimed to produce myostatin (MSTN) gene-edited embryos of the Murrah buffalo using the CRISPR/Cas9 system and SCNT. For this, fibroblast cells were electroporated with sgRNAs carrying all-in-one CRISPR/Cas9 plasmids targeting the first exon of the MSTN gene. Following puromycin selection, single-cell clonal populations were established and screened using the TA cloning and Sanger sequencing methods. Of eight single-cell clonal populations, one with a monoallelic and another with a biallelic heterozygous gene editing event were identified. These two gene-edited clonal cell populations were successfully used to produce blastocyst-stage embryos using the handmade cloning method. This work establishes the technical foundation for generation of genome-edited cloned embryos in the buffalo.

ISP good clinical practice recommendations for gum care.

Oral health is vital for the general well-being, overall body health and the quality of life throughout our lifetime. Most of the oral diseases and conditions are largely related to the maintenance of oral hygiene, lacking that people suffer from diverse oral diseases at different times in their life. With greater life expectancy, the individuals have teeth involved with periodontal diseases that would not only require professional care but also home gum care for them to last a lifetime. Indian Society of Periodontology (ISP) has recognized the need for systematic documents to update everyday clinical practice of general dental practitioners and have provided evidence-based consensus documents, namely good clinical practice recommendations from time to time to raise the oral health-related awareness and standards of oral healthcare delivery across the country. The current set of clinical practice recommendations focused to "Gum Care for All", is aimed at emphasizing and enhancing the awareness regarding oral health promotion, maintenance, and disease prevention. Twenty-five subject matter experts from across the nation, prepared these recommendations after a thorough literature review and group discussions. The document has been prepared in three distinct sections, namely pretherapeutic, therapeutic, and post therapeutic, to provide guidance during the respective phases of patient management and may serve as a quick and concise reference to the readers. The guidelines shall provide the distinct definitions, signs and symptoms, treatment required; recall visit specifications for plausible clinical case situations, home care advice regarding maintenance of oral hygiene including information on brushing technique, care and change of brush, use of interdental aids, and mouthwashes, etc. The document should advocate and guide the combined efforts of general dentists, and the population at large toward an empowered, evidence based, integrated, and comprehensive oral health care, which shall enhance the healthful functioning and longevity of the dentition and general health of the individual.

Impact of gadolinium doping into the frustrated antiferromagnetic lithium manganese oxide spinel.

Cubic spinel LiMn2O4 (LMO) are promising electrode materials for advanced technological devices owing to their rich electrochemical properties. Here, a series of Gd3+-doped LiMn2O4 were synthesized using a simple one-step sol-gel synthesis, and a systematized study on the effect of increasing Gd3+ concentration on magnetic properties is conferred. The Raman and density functional theory (DFT) calculations of the synthesized materials were correlated with the magnetic properties; we observed a high coercivity value for the doped LMO compared to pristine LMO, which scales down from 0.57T to 0.14T with an increase in Gd concentration. The samples exhibited paramagnetic (at 300K) to antiferromagnetic (at 5K) transition and variation in the magnetic moment due to the replacement of Mn+2 or Mn+3 ion by Gd+3 ion from the octahedral 16d lattice site. The observed phase transitions in the hysteresis curve below the Neel temperature (TN) at 5K are found to be due to the superexchange mechanism.