Flavonoids: Food associations, therapeutic mechanisms, metabolism and nanoformulations.

Flavonoids possess an impressive therapeutic potential, thereby imparting them a nutraceutical character. As it becomes increasingly common to consume foods associated with healing properties, it is imperative to understand the associations of different foods with different classes of nutraceutic compounds, and their mechanisms of therapeutic action. At the same time, it is important to address the limitations thereof so that plausible future directions may be drawn. This review summarizes the food associations of flavonoids, and discusses the mechanisms responsible for imparting them their nutraceutic properties, detailing the nuclear factor erythroid 2-related factor 2 (NRF2) signaling pathway, inhibition of inflammatory signaling pathways such as toll-like receptor (TLR), nuclear factor kappa-light-chain-enhancer of activated B cells (NF-kB), cyclooxygenase 2 (COX-2) and lipoxygenase-2 (LOX-2) mediators. Further on, the review explains the mechanism of flavonoids metabolism, reasons for low bioavailability and thereafter recapitulates the role of technological interventions to overcome the limitations, with a particular focus on nanoformulations that utilize the synergy between flavonoids and biocompatible materials used as nanocarriers, as reported in works spanning over a decade. It is the Generally Recognized as Safe (GRAS) classified carriers that will become the basis for developing functional formulations. It is promisingly noteworthy that some flavonoid formulations have been commercialized and mentioned therein. Such commercially viable and safe for consumption technological applications pave way for bringing science to the table, and add value to the innate properties of flavonoids.

Review on recent advances in fabrication of enzymatic and chemical sensors for hypoxanthine.

Hypoxanthine is an important product of the nucleotide degradation pathway. It has been considered as a potential marker for assessing meat freshness and clinical diagnosis. In the review, we focus on advancement made in the fabrication of hypoxanthine sensors. Several traditional methods are being utilized for the detection of hypoxanthine, but these methods are expensive, complex, require pretreatment of the sample which is time-consuming and trained persons to operate. Sensors have emerged as simple, rapid, economic, disposable, and portable tools for hypoxanthine detection in biological samples. In particular, the review describes the significant role of hypoxanthine in clinical and food applications. Classification of sensors into enzymatic and non-enzymatic sensors along with the different methods used for xanthine oxidase immobilization and type of transducers used for hypoxanthine detection are briefly explained.

Investigations on Antioxidative Potential of Poroid Medicinal Mushroom Porodaedalea pini (Agaricomycetes).

The present investigations were undertaken to evaluate the antioxidative potential of Porodaedalea pini (Brot.) Murrill. Different solvent extracts were prepared using powdered basidiocarps to determine the total phenolic content in terms of tannic acid equivalents (TAE), hydroxyl, superoxide, and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity. Maximum TAE (12.42 mg/g) were found in hot water (HW) extract, which was obtained for 1 h as compared to ethanol (0.456 mg/g) and methanol (0.227 mg/g) extracts. This was further supported by high hydroxyl radical scavenging activity (90.0%), superoxide radical scavenging activity (88.9%), and DPPH radical scavenging activity (74.92%) in the the HW extract obtained for 1 h. Mass spectra analysis of HW extract revealed the presence of 14 polyphenolic compounds responsible for imparting antioxidative character. Among these hispidulin is one of the major polyphenolic compounds present in the poroid mushroom under investigation; this was further validated by high-performance liquid chromatography analysis.

L-arginine biosensors: A comprehensive review.

Arginine has been considered as the most potent nutraceutics discovered ever, due to its powerful healing property, and it's been known to scientists as the Miracle Molecule. Arginine detection in fermented food products is necessary because, high level of arginine in foods forms ethyl carbamate (EC) during the fermentation process. Therefore, L-arginine detection in fermented food products is very important as a control measure for quality of fermented foods, food supplements and beverages including wine. In clinical analysis arginine detection is important due to their enormous inherent versatility in various metabolic pathways, topmost in the synthesis of Nitric oxide (NO) and tumor growth. A number of methods are being used for arginine detection, but biosensors technique holds prime position due to rapid response, high sensitivity and high specificity. However, there are many problems still to be addressed, including selectivity, real time analysis and interference of urea presence in the sample. In the present review we aim to emphasize the significant role of arginine in human physiology and foods. A small attempt has been made to discuss the various techniques used for development of arginine biosensor and how these techniques affect their performance. The choice of transducers for arginine biosensor ranges from optical, pH sensing, ammonia gas sensing, ammonium ion-selective, conductometric and amperometric electrodes because ammonia is formed as a final product.

Quenching action of monofunctional sulfur mustard on chlorophyll fluorescence: towards an ultrasensitive biosensor.

An ultrasensitive fluorimetric biosensor for the detection of chemical warfare agent sulfur mustard (SM) was developed using its monofunctional analogue. SM is a vesicant and a potent chemical threat owing to its direct toxic effects on eyes, lungs, skin and DNA. This work investigates the quenching action of the analyte on chlorophyll fluorescence as elucidated by nuclear magnetic resonance, Fourier transform infrared spectroscopy and mass spectrometry studies suggesting the electrophilic attack of carbonium ion on nitrogens of the porphyrin moiety of chlorophyll. The properties of immobilisation matrix were optimised and scanning electron microscope observations confirmed improvement in pore size of sol-gels by addition of 32 % (v/v) glycerol, a feature enabling enhanced sensitivity towards the analyte. Chlorophyll embedded sol-gel was treated with increasing concentrations of monofunctional SM and the corresponding drop in maximum fluorescence intensity as measured by emission at 673 nm was observed, which varied linearly and had a detection limit of 7.68 × 10(-16) M. The biosensor was found to be 6 orders of magnitude more sensitive than the glass microfibre-based disc biosensor previously reported by us.

A Bacillus sphaericus Based Biosensor for Monitoring Nickel Ions in Industrial Effluents and Foods.

A microbial-based biosensor has been developed based on enzyme inhibition bioassay for monitoring the presence of Ni(II) in real-time samples. The sensing element is immobilized Bacillus sphaericus MTCC 5100 yielding urease enzyme. The transducer is an NH4+ ion selective electrode in conjunction with a potentiometer. Heavy metals are potentially toxic to human beings. Nickel is associated with causing adverse health effects such as dermatitis and vertigo, in humans. Toxicity is manifested by affecting T-cell system and suppressing the activity of natural killer cells. Nickel finds applications in electroplating, coinage, electrodes, jewellery, alloys. The foods rich in Ni(II) are nuts, beans, oats, and wheat. The range of Ni(II) detection by the developed biosensor is 0.03-0.68 nM (0.002-0.04 ppb) with a response time of 1.5 minutes. For application, the Ni(II) effluent was procured from an electroplating industrial unit and was found to have a concentration of 100.0 ppm Ni(II). In foods, wheat flour sample was acid digested and Ni(II) was specifically complexed in the presence of other cations, and had an Ni(II) concentration of 0.044 ppm. The developed system has a reliability of 91.5% and 90.6%, respectively, for the samples and could possibly replace the existing conventional techniques of analysis.

Biosensors for heavy metals.

A biosensor is an analytical device that consists of an immobilized biocomponent in conjunction with a transducer, and represents a synergistic combination of biotechnology and microelectronics. This review summarizes the use of biosensors for detecting and quantifying heavy metal ions. Heavy metal contamination is of serious concern to human health since these substances are non-biodegradable and retained by the ecological system. Conventional analytical techniques for heavy metals (such as cold vapour atomic absorption spectrometry, and inductively coupled plasma mass spectrometry) are precise but suffer from the disadvantages of high cost, the need for trained personnel and the fact that they are mostly laboratory bound. Biosensors have the advantages of specificity, low cost, ease of use, portability and the ability to furnish continuous real time signals. The analysis of heavy metal ions can be carried out with biosensors by using both protein (enzyme, metal-binding protein and antibody)-based and whole-cell (natural and genetically engineered microorganism)-based approaches.

A disposable microbial based biosensor for quality control in milk.

The food industry needs suitable analytical methods for quality control, that is, methods that are rapid, reliable, specific and cost-effective as current wet chemistries and analytical practices are time consuming and may require highly skilled labor and expensive equipment. The need arises from heightened consumer concern about food composition and safety. The present study was carried out keeping in view the recently emerging concern of the presence of urea in milk, called "synthetic milk". The biocomponent part of the urea biosensor is an immobilized urease yielding bacterial cell biomass isolated from soil and is coupled to the ammonium ion selective electrode of a potentiometric transducer. The membrane potential of all types of potentiometric cell based probes is related to the activity of electrochemically detected product, and thus to the activity of the substrate by a form of the Nernst equation. Samples of milk were collected and analyzed for the presence of urea by the developed biosensor with a response time as low as 2 min. The results were in good correlation with the pure enzyme system.