Methyl CpG binding protein MBD2 has a regulatory role on the BRCA1 gene expression and its modulation by resveratrol in ER+, PR+ & triple-negative breast cancer cells.

BACKGROUND: Resveratrol has demonstrated its ability to regulate BRCA1 gene expression in breast cancer cells, and previous studies have established the binding of MBD proteins to BRCA1 gene promoter regions. However, the molecular mechanism underlying these interactions remains to be elucidated. The aimed to evaluate the impact of MBD proteins on the regulation of BRCA1, BRCA2, and p16 genes and their consequential effects on breast cancer cells. METHODS: Efficacy of resveratrol was assessed using the MTT assay. Binding interactions were investigated through EMSA, ChIP, & MeIP assay. Expression analyses of MBD genes and proteins were conducted using qRT-PCR and western blotting, respectively. Functional assays, including clonogenic, migratory, and sphere formation assays were used to assess cancer cells' colony-forming, metastatic, and tumor-forming abilities. The cytotoxicity of resveratrol on cancer cells was also tested using an apoptosis assay. RESULTS: The study determined an IC50 of 30µM for resveratrol. MBD proteins were found to bind to the BRCA1 gene promoter. Resveratrol exhibited regulatory effects on MBD gene expression, subsequently impacting BRCA1 gene expression and protein levels. Higher concentrations of resveratrol resulted in reduced colony and sphere formation, decreases migration of cancer cells, and an increases number of apoptotic cells in breast cancer cells. Impact Identification of MBD2-BRCA1 axis indicates their significant role in the induction of apoptosis and reduction of metastasis and proliferation in breast cancer cells. Further therapy can be designed to target these MBD proteins and resveratrol could be used along with other anticancer drugs to target breast cancer. CONCLUSIONS: In conclusion MBD2 protein interact to the BRCA1 gene promoter, and resveratrol modulates MBD2 gene expression, which in turn regulates BRCA1 gene expression, and inhibits cell proliferation, migration, and induces apoptosis in ER+, PR+ & Triple negative breast cancer cells.

Early evidence of implementation of District Residency Programme: experiences and challenges of residents in Rajasthan, India.

BACKGROUND: District Residency Programme (DRP) was introduced by National Medical Commission as mandatory three-months training program for postgraduate residents. The program was for the first time implemented in April 2023 in Rajasthan. However, it ran into several teething problems, especially for residents. With a lack of any precedence, this study was planned to explore experiences and challenges of residents posted in DRP. METHODS: Cross-sectional study was conducted at 12 DRP sites attached to SMS Medical College, Jaipur between August-October 2023. A self-administered questionnaire was used to collect information from residents who had completed DRP. Questions were scored on a five-point Likert scale. Mann-Whitney U test and Kruskal-Wallis H test was used to show association. RESULTS: Only around 17% residents felt that the learning objectives of DRP were fulfilled and nearly 60% residents felt isolated from academic activities and parent department. Over half of the residents were never posted with their concerned specialty services. Around four-fifth residents felt concerned about safety at least sometimes and more than three-fourth residents were dissatisfied with basic amenities. Kruskal-Wallis and Mann-Whitney tests showed significant association of gender and specialisation strata with multiple outcome variables. CONCLUSION: The study finds high degree of dissatisfaction among residents towards learning objectives, academic learning, and basic amenities during DRP. There was also a clear lack of specialty-exposure and high concerns of safety, especially for female residents. The study findings should alarm and inform policymakers and administrators to improve DRP implementation so as to better achieve laid objectives.

Incidence of Different Characters of Neuropathic Pain in Cancer Patients Coming to Tertiary Care Centre in North India Over A Period of 1 Year - An Observational Study.

Objectives: Pain is classified as nociceptive, neuropathic, or nociplastic. Neuropathic pain presents as variable phenotypes (characters) based on specific aetiology and pathophysiology. This study aimed to find out among cancer patients the incidence of different phenotypes of neuropathic pain and form specific phenotypic clusters based on the underlying neurophysiology and association of sensory profile with various organ systems - A prospective observational study. Materials and methods: The Institutional Ethical Committee clearance (IEC code: 2020-49-MD-EXP-15) https://ctri.nic.in/Clinicaltrials/showallp.php?mid1=44886&EncHid=88651.15716&userName=CTRI/2020/09/027964 approval was obtained. After written and informed consent, patients of age group 18-80 years, registering in the pain and palliative outpatient department or radiotherapy department with complaints of pain and not taking any anti-neuropathic pain medications, were enrolled. They were assessed using Leeds assessment of neuropathic symptoms and signs (LANSS) pain score, and a score of >12 was eligible for assessment of neuropathic pain phenotypes. Results: Out of 210 cancer patients complaining of pain, a neuropathic component with LANSS >12 was found in 73 (34.76%). The most predominant phenotypes, allodynia> tingling> pricking = burning, were found in 72.60%, 56.16%, and 43.84% of patients, respectively. Phenotypes were clustered into Nodes 1 and 2 based on clinically significant separation of phenotypes. Node 1 had neuropathic pain of spontaneous origin found predominantly in gastrointestinal tract (GIT) and genitourinary tract (GUT) cancers. Node 2 had stimulus-evoked negative and positive characters which occurred in head and neck, thoracic, and spinal metastatic cancers. Conclusion: Careful patient assessment reveals the incidence of neuropathic pain in 34.76%; allodynia and tingling astable the most prominent phenotypes. Broadly, sensory characters were clustered into spontaneous and stimulus-evoked sensations with GIT and GUT cancers presenting with Node 1 symptoms.

Compare the Centering Ability, Canal Transportation and Root Canal Area Increase of XP Endoshaper, Hyflex CM and K3 XF File System by using Cone Beam: An Original Research.

Objective: Using cone beam computed tomography (CBCT), this study compared three rotary file systems-XP Endoshaper, Hyflex CM, and K3 XF-for centering, canal transportation, and root canal area growth. Materials and Methods: The rotating file system randomly separated 60 removed human mandibular molars into three groups (n = 20). Manufacturer-recommended root canal instrumentation was done. Specialized software examined pre- and post-instrumentation CBCT scans. Centering ability was measured by canal transportation and root canal area expansion at different levels from the apex. Results: The Hyflex CM file system had the best centering and the least canal transit at all levels (P < 0.05). XP Endoshaper increased the root canal area the most (P < 0.05). The K3 XF file system had average centering and canal transfer results. Conclusion: The Hyflex CM system centered well, whereas the XP Endoshaper system increased the root canal area the most. The clinical context and therapeutic goals should determine the rotating file system.

Appraising LaQshya's potential in measuring quality of care for mothers and newborns: a comprehensive review of India's Labor Room Quality Improvement Initiative.

BACKGROUND: Poor intrapartum care in India contributes to high maternal and newborn mortality. India's Labor Room Quality Improvement Initiative (LaQshya) launched in 2017, aims to improve intrapartum care by minimizing complications, enforcing protocols, and promoting respectful maternity care (RMC). However, limited studies pose a challenge to fully examine its potential to assess quality of maternal and newborn care. This study aims to bridge this knowledge gap and reviews LaQshya's ability to assess maternal and newborn care quality. Findings will guide modifications for enhancing LaQshya's effectiveness. METHODS: We reviewed LaQshya's ability to assess the quality of care through a two-step approach: a comprehensive descriptive analysis using document reviews to highlight program attributes, enablers, and challenges affecting LaQshya's quality assessment capability, and a comparison of its measurement parameters with the 352 quality measures outlined in the WHO Standards for Maternal and Newborn Care. Comparing LaQshya with WHO standards offers insights into how its measurement criteria align with global standards for assessing maternity and newborn care quality. RESULTS: LaQshya utilizes several proven catalysts to enhance and measure quality- institutional structures, empirical measures, external validation, certification, and performance incentives for high-quality care. The program also embodies contemporary methods like quality circles, rapid improvement cycles, ongoing facility training, and plan-do-check, and act (PDCA) strategies for sustained quality enhancement. Key drivers of LaQshya's assessment are- leadership, staff mentoring, digital infrastructure and stakeholder engagement from certified facilities. However, governance issues, understaffing, unclear directives, competency gaps, staff reluctance towards new quality improvement approaches inhibit the program, and its capacity to enhance quality of care. LaQshya addresses 76% of WHO's 352 quality measures for maternal and newborn care but lacks comprehensive assessment of crucial elements: harmful labor practices, mistreatment of mothers or newborns, childbirth support, and effective clinical leadership and supervision. CONCLUSION: LaQshya is a powerful model for evaluating quality of care, surpassing other global assessment tools. To achieve its maximum potential, we suggest strengthening district governance structures and offering tailored training programs for RMC and other new quality processes. Furthermore, expanding its quality measurement metrics to effectively assess provider accountability, patient outcomes, rights, staff supervision, and health facility leadership will increase its ability to assess quality improvements.

NiTi-Cu Bimetallic Structure Fabrication through Wire Arc Additive Manufacturing.

This study endeavors to comprehensively explore and elucidate the seamless integration of NiTi shape memory alloys (SMAs) into multifaceted applications through the utilization of novel joining techniques. The primary focus lies in the utilization of wire arc additive manufacturing (WAAM) to deposit Nitinol (NiTi) onto Copper (Cu), thereby introducing a transformative approach for their integration into electro-mechanical systems and beyond. Through a detailed examination of the NiTi/Cu bimetallic junction, using advanced analytical techniques including SEM, XRD, and DSC analyses, this research aims to unravel the intricate complexities inherent within the interface. The SEM images and X-ray patterns obtained reveal a complex and nuanced interface characterized by a broad mixed zone comprising various constituents, including Ti(Ni,Cu)2, pure Cu, Ti2(Ni,Cu)3 precipitates, and Ni-rich NiTi precipitates. The DSC results, showcasing low-intensity broad peaks during thermal cycling, underscore the inherent challenges in demonstrating functional properties within the NiTi/Cu system. Recognizing the critical importance of an enhanced martensitic transformation, this study delves into the effects of heat treatment. Calorimetric curves post-annealing at 500 °C exhibit distinct transformation peaks, shedding light on the intricate influence of NiTi layer distribution within the junction. The optimal heat treatment parameters for NiTi/Cu junction restoration are meticulously explored and determined at 500 °C for a duration of 12 h. Furthermore, the study offers valuable insights into optimizing NiTi-Cu joints, with micro-hardness values reaching 485 HV and compressive strength scaling up to 650 MPa. These significant findings not only hold promise for diverse applications across various industries but also pave the way for further research directions and explorations into the realm of SMA integration and advanced joining methodologies.

Microbiome interactions with different risk factors in development of myocardial infarction.

Among all non-communicable diseases, Cardiovascular Diseases (CVDs) stand as the leading global cause of mortality. Within this spectrum, Myocardial Infarction (MI) strikingly accounts for over 15 % of all deaths. The intricate web of risk factors for MI, comprising family history, tobacco use, oral health, hypertension, nutritional pattern, and microbial infections, is firmly influenced by the human gut and oral microbiota, their diversity, richness, and dysbiosis, along with their respective metabolites. Host genetic factors, especially allelic variations in signaling and inflammatory markers, greatly affect the progression or severity of the disease. Despite the established significance of the human microbiome-nutrient-metabolite interplay in associations with CVDs, the unexplored terrain of the gut-heart-oral axis has risen as a critical knowledge gap. Moreover, the pivotal role of the microbiome and the complex interplay with host genetics, compounded by age-related changes, emerges as an area of vital importance in the development of MI. In addition, a distinctive disease susceptibility and severity influenced by gender-based or ancestral differences, adds a crucial insights to the association with increased mortality. Here, we aimed to provide an overview on interactions of microbiome (oral and gut) with major risk factors (tobacco use, alcohol consumption, diet, hypertension host genetics, gender, and aging) in the development of MI and therapeutic regulation.

Binder-free germanium nanoparticle decorated multi-wall carbon nanotube anodes prepared via two-step electrophoretic deposition for high capacity Li-ion batteries.

Germanium (Ge) has a high theoretical specific capacity (1384 mA h g-1) and fast lithium-ion diffusivity, which makes it an attractive anode material for lithium-ion batteries (LIBs). However, large volume changes during lithiation can lead to poor capacity retention and rate capability. Here, electrophoretic deposition (EPD) is used as a facile strategy to prepare Ge nanoparticle carbon-nanotube (Ge/CNT) electrodes. The Ge and CNT mass ratio in the Ge/CNT nanocomposites can be controlled by varying the deposition time, voltage, and concentration of the Ge NP dispersion in the EPD process. The optimized Ge/CNT nanocomposite exhibited long-term cyclic stability, with a capacity of 819 mA h g-1 after 1000 cycles at C/5 and a reversible capacity of 686 mA h g-1 after 350 cycles (with a minuscule capacity loss of 0.07% per cycle) at 1C. The Ge/CNT nanocomposite electrodes delivered dramatically improved cycling stability compared to control Ge nanoparticles. This can be attributed to the synergistic effects of implanting Ge into a 3D interconnected CNT network which acts as a buffer layer to accommodate the volume expansion of Ge NPs during lithiation/delithiation, limiting cracking and/or crumbling, to retain the integrity of the Ge/CNT nanocomposite electrodes.

Androgen deprivation triggers a cytokine signaling switch to induce immune suppression and prostate cancer recurrence.

Androgen deprivation therapy (ADT) is an effective but not curative treatment for advanced and recurrent prostate cancer (PC). We investigated the mechanisms controlling the response to androgen-deprivation by surgical castration in genetically-engineered mouse models (GEMM) of PC, using high frequency ultrasound imaging to rigorously measure tumor volume. Castration initially causes almost all tumors to shrink in volume, but many tumors subsequently recur within 5-10 weeks. Blockade of tumor necrosis factor (TNF) signaling a few days in advance of castration surgery, using a TNFR2 ligand trap, prevents regression in a PTEN-deficient GEMM. Following tumor regression, a basal stem cell-like population within the tumor increases along with TNF protein levels. Tumor cell lines in culture recapitulate these in vivo observations, suggesting that basal stem cells are the source of TNF. When TNF signaling blockade is administered immediately prior to castration, tumors regress but recurrence is prevented, implying that a late wave of TNF secretion within the tumor, which coincides with the expression of NFkB regulated genes, drives recurrence. The inhibition of signaling downstream of one NFkB-regulated protein, chemokine C-C motif ligand 2 (CCL2), prevents post-castration tumor recurrence, phenocopying post-castration (late) TNF signaling blockade. CCL2 was originally identified as a macrophage chemoattractant and indeed at late times after castration gene sets related to chemotaxis and migration are up-regulated. Importantly, enhanced CCL2 signaling during the tumor recurrence phase coincides with an increase in pro-tumorigenic macrophages and a decrease in CD8 T cells, suggesting that recurrence is driven at least in part by tumor immunosuppression. In summary, we demonstrate that a therapy-induced switch in TNF signaling, a consequence of the increased stem cell-like character of the residual tumor cells surviving ADT, induces an immunosuppressive tumor microenvironment and concomitant tumor recurrence.

Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures.

Nitinol (NiTi) is well known for its corrosion resistance, shape memory effect, superelasticity, and biocompatibility, whereas Titanium (Ti) is well known for its high specific strength, corrosion resistance, and biocompatibility. The bimetallic joint of NiTi and Ti is required for applications that require tailored properties at different locations within the same component, as well as to increase design flexibility while reducing material costs. However, because of the formation of brittle intermetallic phases, connecting NiTi and Ti is difficult. In the present study, a systematic experimental investigation is carried out to develop NiTi-Ti bimetallic joint using wire arc additive manufacturing (WAAM) for the first time and to evaluate its microstructure, mechanical properties, martensitic transformation, and actuation behavior in the as-built condition. The defect-free joint is obtained through WAAM and microstructural studies indicate the formation of intermetallics at the NiTi-Ti interface leading to higher microhardness values (600 HV). Shape recovery behavior and phase transformation temperature were also enhanced in comparison to NiTi. An improved actuation and bending angle recovery is observed in comparison with NiTi. The present study lays the way for the use of WAAM in the construction of NiTi and Ti bimetallic structures for engineering and medicinal applications.

Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay.

Shape memory alloy structures for actuator and vibration damper applications may be manufactured using wire arc additive manufacturing (WAAM), which is one of the additive manufacturing technologies. Multilayer deposition causes heat accumulation during WAAM, which rises the preheat temperature of the previously created layer. This leads to process instabilities, which result in deviations from the desired dimensions and mechanical properties changes. During WAAM deposition of the wall structure, a systematic research is carried out by adjusting the interlayer delay from 10 to 30 s. When the delay period is increased from 10 to 30 s, the breadth decreases by 45% and the height increases by 33%. Grain refinement occurs when the interlayer delay duration is increased, resulting in better hardness, phase transformation temperature, compressive strength, and shape recovery behavior. This study shows how the interlayer delay affects the behavior of WAAM-built nickel-titanium alloy (NiTi) structures in a variety of applications.

Revealing Seed-Mediated Structural Evolution of Copper-Silicide Nanostructures: Generating Structured Current Collectors for Rechargeable Batteries.

Metal silicide thin films and nanostructures typically employed in electronics have recently gained significant attention in battery technology, where they are used as active or inactive materials. However, unlike thin films, the science behind the evolution of silicide nanostructures, especially 1D nanowires (NWs), is a key missing aspect. Cux Siy nanostructures synthesized by solvent vapor growth technique are studied as a model system to gain insights into metal silicide formation. The temperature-dependent phase evolution of Cux Siy structures proceeds from Cu>Cu0.83 Si0.17 >Cu5 Si>Cu15 Si4 . The role of Cu diffusion kinetics on the morphological progression of Cu silicides is studied, revealing that the growth of 1D metal silicide NWs proceeds through an in situ formed, Cu seed-mediated, self-catalytic process. The different Cux Siy morphologies synthesized are utilized as structured current collectors for K-ion battery anodes. Sb deposited by thermal evaporation upon Cu15 Si4 tripod NWs and cube architectures exhibit reversible alloying capacities of 477.3 and 477.6 mAh g-1 at a C/5 rate. Furthermore, Sb deposited Cu15 Si4 tripod NWs anode tested in Li-ion and Na-ion batteries demonstrate reversible capacities of ≈518 and 495 mAh g-1 .

Distinct intestinal microbial signatures linked to accelerated systemic and intestinal biological aging.

BACKGROUND: People living with HIV (PLWH), even when viral replication is controlled through antiretroviral therapy (ART), experience persistent inflammation. This inflammation is partly attributed to intestinal microbial dysbiosis and translocation, which may lead to non-AIDS-related aging-associated comorbidities. The extent to which living with HIV - influenced by the infection itself, ART usage, sexual orientation, or other associated factors - affects the biological age of the intestines is unclear. Furthermore, the role of microbial dysbiosis and translocation in the biological aging of PLWH remains to be elucidated. To investigate these uncertainties, we used a systems biology approach, analyzing colon and ileal biopsies, blood samples, and stool specimens from PLWH on ART and people living without HIV (PLWoH) as controls. RESULTS: PLWH exhibit accelerated biological aging in the colon, ileum, and blood, as measured by various epigenetic aging clocks, compared to PLWoH. Investigating the relationship between microbial translocation and biological aging, PLWH had decreased levels of tight junction proteins in the intestines, along with increased microbial translocation. This intestinal permeability correlated with faster biological aging and increased inflammation. When investigating the relationship between microbial dysbiosis and biological aging, the intestines of PLWH had higher abundance of specific pro-inflammatory bacteria, such as Catenibacterium and Prevotella. These bacteria correlated with accelerated biological aging. Conversely, the intestines of PLWH had lower abundance of bacteria known for producing the anti-inflammatory short-chain fatty acids, such as Subdoligranulum and Erysipelotrichaceae, and these bacteria were associated with slower biological aging. Correlation networks revealed significant links between specific microbial genera in the colon and ileum (but not in feces), increased aging, a rise in pro-inflammatory microbe-related metabolites (e.g., those in the tryptophan metabolism pathway), and a decrease in anti-inflammatory metabolites like hippuric acid. CONCLUSIONS: We identified specific microbial compositions and microbiota-related metabolic pathways that are intertwined with intestinal and systemic biological aging. This microbial signature of biological aging is likely reflecting various factors including the HIV infection itself, ART usage, sexual orientation, and other aspects associated with living with HIV. A deeper understanding of the mechanisms underlying these connections could offer potential strategies to mitigate accelerated aging and its associated health complications. Video Abstract.

How Does Tobacco Use Affect the Cognition of Older Adults? A Propensity Score Matching Analysis Based on a Large-Scale Survey.

INTRODUCTION: Tobacco is a well-established risk factor for cancer, but its association with other morbidities needs consideration. The low-income and middle-income countries (LMICs) with unprecedented demographic transformation lack evidence on tobacco use and its impact on cognitive health. AIMS AND METHODS: Using a propensity score matching approach, we utilized data from the Longitudinal Ageing Study of India. Study employed 1:1 nearest neighbor matching with the replacement methodology. We estimated the odds of the poor cognitive score and tobacco use among older adults based on five different models for ever tobacco user, former tobacco user, current tobacco user, current smokers, and current smokeless tobacco users with reference to never tobacco users. RESULTS: The estimated average treatment effect for the treated and the untreated group has shown a higher likelihood of cognitive decline among ever (OR -0.26; 95%CI -0.43 to -0.09), current (OR -0.28; 95%CI -0.45 to -0.10), and former (OR -0.53; 95%CI -0.87 to -0.19) tobacco users compared to never tobacco users. The finding further suggests the odds of lower cognitive scores among older adults who were smokers (OR -0.53; 95%CI -0.87 to -0.19) and smokeless tobacco users (OR -0.22; 95%CI -0.43 to -0.01) as compared to never tobacco users. CONCLUSIONS: Interventions designed to prevent the incidence of cognitive impairment should focus on limiting the use of tobacco. Strategies under the tobacco-free generation initiative should be amplified in order to prevent future generations from productivity loss, premature ageing and to promote healthy aging. IMPLICATIONS: Evidence of a definitive association between tobacco consumption and cognition among older adults is sporadic in LMICs. Though tobacco is a risk factor for various diseases including cancer, the extent of its impact on cognitive health among the older population is limited. This study contributes to the existing literature by highlighting poor cognitive outcomes among older adults who smoke tobacco and/or consume smokeless tobacco as compared to never-tobacco users. Our findings emphasize the need to accelerate programmes related to tobacco-free generation in LMICs to reach a higher quality of life and healthy aging in pursuit of achieving the sustainable development goal of "good health and well-being."

Choroidal thickness in thyroid eye disease and its correlation with disease activity.

CONTEXT: This study adds to the existing body of literature on the role of optical coherence tomography (OCT) parameters in active thyroid eye disease (TED) among the Indian population. PURPOSE: Comparison of choroidal vascularity index (CVI) and subfoveal choroidal thickness (SFCT) in active and inactive TED. SETTINGS AND DESIGN: An observational, cross-sectional analytical study conducted at a tertiary eye care hospital in North India that included patients with active and inactive TED. METHODS: Demographic details and clinical evaluation were performed for all TED patients. SFCT was determined with OCT by using the Cirrus linear measurement tool. CVI was calculated using Image J software. The SFCT and CVI measurements were compared between both groups. STATISTICAL ANALYSIS USED: Comparison between active and inactive TED groups was done using Mann-Whitney U test for non-parametric data and Student t test for parametric data. Multivariate regression analysis was performed with SFCT and CVI as dependent variables. RESULTS: Sixty-two eyes of 31 patients were included. Thirteen eyes had active TED, and 49 eyes had inactive TED. SFCT was significantly lower in eyes with higher clinical activity score (CAS) and older age. No significant difference was found in CVI between active and inactive TED eyes. CONCLUSION: SFCT was lower in eyes with higher CAS and older age. Our findings differ from previous studies, which showed a positive correlation between SFCT and CAS. There was no significant difference in CVI between active and inactive TED eyes.

Trends in age of tobacco use initiation over time in Bangladesh, India and Pakistan: analysis of cross-sectional nationally representative surveys.

OBJECTIVE: Tobacco use begins at an early age and typically leads to a long-term addiction. The age of initiation for tobacco use is not well studied in South Asia, where 22% of tobacco smokers and 81% of smokeless tobacco (SLT) users reside. METHODS: Data from the nationally representative Global Adult Tobacco Surveys in India, Bangladesh and Pakistan were analysed to examine patterns of initiation among smokers and smokeless tobacco users. RESULTS: Data on 94 651 individuals were analysed, of which 13 396 reported were ever daily smokers and 17 684 were ever SLT users. The proportion of individuals initiating tobacco use before the age of 15 years has increased over time. The rates of SLT initiation among those aged 15-24 years increased markedly in Bangladesh (by 7.8%) and Pakistan (by 37.7%) between 1983 and 1999-2000. Among males, the increase in SLT initiation was higher in individuals aged below 15 years compared with other age groups in India and Bangladesh. Smoking initiation among females aged below 15 years has also significantly increased in India over time. Compared with the initiation of tobacco smoking before the age of 15 years, a greater increase in the proportion of SLT users was observed in urban areas. CONCLUSION: Our findings indicate that the proportion of youth initiating tobacco (both smoking and smokeless) before the age of 15 years has increased over time in all three countries. Moreover, variations in age at initiation for different types of tobacco products across countries, and by rurality, were noticeable. Younger youths (aged up to 15 years) should therefore be a priority population for tobacco control interventions. Strategies such as raising the legal age of tobacco sale and use to 21 years, and, other measures under WHO Framework Convention on Tobacco Control (FCTC), may prevent underage use and avert lifelong addiction to tobacco products.

Characterization of physiochemical parameters & their effect on microbial content of smokeless tobacco products marketed in north India.

BACKGROUND OBJECTIVES: Smokeless tobacco (SLT) product consumption has profound public health implications for its users. The p H and moisture of SLTs determine the bioavailability of nicotine, the microbial structure dynamics and the amount of microbial conversion of tobacco alkaloids to carcinogenic tobacco-specific nitrosamines. This study aimed to characterize and compare the p H, moisture and alkaloid content of various SLT products. METHODS: Thirty-seven SLT samples including khaini , snus, moist snuff, gul , pan masala , zarda , Mainpuri kapoori and qiwam were collected from the retail market around the National Capital Region in north India and their p H, moisture, nicotine and alkaloid content were measured. The p H and total nicotine were used to calculate the amount of free nicotine, the readily absorbed form, for each product by applying the Henderson-Hasselbalch equation. RESULTS: The investigation showed that the SLTs varied drastically in their p H (5.36 to 10.27), moisture content (4.7 to 51.7%) and alkaloid content (0.82 to 35.87 mg/g). The p H and free nicotine levels of a product were found to be positively correlated, and the highest free nicotine content was reported in snus samples. Further, the moisture content was seen to impact the bacterial and fungal diversity in these samples. INTERPRETATION CONCLUSIONS: Studies to detect the presence of pathogenic microbiological genera as well as potentially toxic constituents are warranted. The use of SLTs as an alternative to cigarette smoking should be discouraged, and cessation programmes must call attention to their detrimental effects and emphasize on benefits of quitting SLT consumption.

Tobacco exposure among antenatal women in India: Challenges in tobacco screening & cessation counselling.

Links between tobacco use and poor pregnancy outcomes are well established. Despite various tobacco control measures taken by the government, nearly 5-8 per cent of pregnant women consume tobacco in India. Antenatal check-ups are an opportunity to assess and assist women in quitting tobacco during pregnancy. This review highlights the challenges faced in identifying pregnant tobacco users and providing cessation counselling to them in a formal healthcare setup in the Indian context. For this narrative review, open access databases like PubMed and Google Scholar were searched, using the following search terms: challenges, quitting tobacco use, smokeless tobacco, pregnancy and India. Original articles published between 2010 and July 2022 were included in the English language with available free full text. Out of the thirty articles found to be eligible, seven were included in the review. Official websites of the National Health Mission and National Tobacco Control Programme were also searched to retrieve available data on health education and training material for healthcare workers: medical officers, Auxiliary Nurse and Midwives (ANMs), Accredited Social Health Activists (ASHAs) and list of tobacco cessation centres. This review identified the factors such as myths surrounding tobacco use, lack of targeted screening, inadequate training of healthcare workers and inaccessibility of cessation services, which are posing as challenges in controlling tobacco use in this vulnerable section of the population. Specific strategies to address these issues at the micro, meso and macro levels can prove to be vital in controlling tobacco use in pregnant women. This review also identified the vital role of gynaecologists and healthcare workers such as ANMs and ASHA in identifying and providing brief tobacco cessation counselling to pregnant users.

Functional Alkali Metal-Based Ternary Chalcogenides: Design, Properties, and Opportunities.

The search for novel materials has recently brought research attention to alkali metal-based chalcogenides (ABZ) as a new class of semiconducting inorganic materials. Various theoretical and computational studies have highlighted many compositions of this class as ideal functional materials for application in energy conversion and storage devices. This Perspective discusses the expansive compositional landscape of ABZ compositions that inherently gives a wide spectrum of properties with great potential for application. In the present paper, we examine the technique of synthesizing this particular class of materials and explore their potential for compositional engineering in order to manipulate key functional properties. This study presents the notable findings that have been documented thus far in addition to outlining the potential avenues for implementation and the associated challenges they present. By fulfilling the sustainability requirements of being relativity earth-abundant, environmentally benign, and biocompatible, we anticipate a promising future for alkali metal chalcogenides. Through this Perspective, we aim to inspire continued research on this emerging class of materials, thereby enabling forthcoming breakthroughs in the realms of photovoltaics, thermoelectrics, and energy storage.