Application of Alcohols to Inhibit the Formation of Ca(II) Dodecyl Sulfate Precipitate in Aqueous Solutions.

The presence of alkaline earth cations, in particular, Ca2+ and Mg2+ ions in brine, causes undesired effects in solutions containing anionic surfactants because of precipitate formation. In the present study, an anionic surfactant, sodium dodecyl sulfate (SDS), was investigated, focusing on the determination of various properties (surface tension, critical micelle concentration, micelle size, turbidity) in the presence of alcohols and, in particular, the inhibition of the precipitation of SDS with calcium ions. The calcium ions were added to the surfactant in increasing concentrations (3.0-10.0 g/L), and short-carbon-chain alcohols (methanol, ethanol, n-propanol and n-butanol) were used to shift the onset of precipitate formation. The critical micelle concentration (CMC) of SDS in the presence of alcohols was also determined. It was established that among these alcohols, methanol and ethanol did not exert significant effects on the solubility of the Ca(DS)2 precipitate, while n-propanol and n-butanol were found to be much more efficient inhibitors. In addition, all the alcohols in the applied concentration range (up to 20 V/V%) were found to decrease the critical micelle concentration of SDS.

Binding of Ca2+ Ions to Alkylbenzene Sulfonates: Micelle Formation, Second Critical Concentration and Precipitation.

Anionic surfactants, such as sodium linear alkylbenzene sulfonates (NaLAS), are utilized in various fields, including industry, household, and agriculture. The efficiency of their use in aqueous environments is significantly affected by the presence of cations, Ca2+ and Mg2+ in particular, as they can decrease the concentration of the surfactant due to precipitation. To understand cation-sulfonate interactions better, we study both NaLAS colloidal solutions in the presence of CaCl2 and precipitates forming at higher salt concentrations. Upon addition of CaCl2, we find the surface tension and critical micelle concentration of NaLAS to decrease significantly, in line with earlier findings for alkylbenzylsulfonates in the presence of divalent cations. Strikingly, an increase in the surface tension is discernible above 0.6 g L-1 NaLAS, accompanied by the decrease of apparent micelle sizes, which in turn gives rise to transparent systems. Thus, there appears to be a second critical concentration indicating another micellar equilibrium. Furthermore, the maximum salt tolerance of the surfactant is 0.1 g L-1 Ca2+, above which rapid precipitation occurs yielding sparingly soluble CaLAS2∙2H2O.

Biocompatible poly(ethylene succinate) polyester with molecular weight dependent drug release properties.

In the present study, we demonstrate that well-known molecular weight-dependent solubility properties of a polymer can also be used in the field of controlled drug delivery. To prove this, poly(ethylene succinate) (PES) polyesters with polycondensation time regulated molecular weights were synthesized via catalyst-free direct polymerization in an equimolar ratio of ethylene glycol and succinic acid monomers at 185 °C. DSC and contact angle measurements revealed that increasing the molecular weight (Mw, 4.3-5.05 kDa) through the polymerization time (40-80 min) increased the thermal stability (Tm= ∼61-80 °C) and slightly the hydrophobicity (Θw= ∼27-41°) of the obtained aliphatic polyester. Next, this biodegradable polymer was used for the encapsulation of Ca2+ channel blocker Nimodipine (NIMO) to overcome the poor water solubility and enhance the bioavailability of the drug. The drug/ polymer compatibility was proved by the means of solubility (δ) and Flory-Huggins interaction (miscibility) parameters (χ). The nanoprecipitation encapsulation of NIMO into PES with increasing Mw resulted in the formation of spherical 270 ± 103 nm NIMO-loaded PES nanoparticles (NPs). Furthermore, based on the XRD measurements, the encapsulated form of NIMO-loaded PES NPs showed lower drug crystallinity, which enhanced not only the water solubility but even the water stability of the NIMO in an aqueous medium. The in-vitro drug release experiments demonstrated that the release of NIMO drug could be accelerated or even prolonged by the molecular weights of PES as well. Due to the low crystallinity of PES polyester and low particle size of the encapsulated NIMO drug led to enhance solubility and releasing process of NIMO from PES with lower Mw (4.3 kDa and 4.5 kDa) compared to pure crystalline NIMO. However, further increasing the molecular weight (5.05 kDa) was already reduced the amount of drug release that provides the prolonged therapeutic effect and enhances the bioavailability of the NIMO drug.

M(II)Al4 Type Layered Double Hydroxides-Preparation Using Mechanochemical Route, Structural Characterization and Catalytic Application.

The synthesis of the copper-poor and aluminum-rich layered double hydroxides (LDHs) of the CuAl4 type was optimized in detail in this work, by applying an intense mechanochemical treatment to activate the gibbsite starting reagent. The phase-pure forms of these LDHs were prepared for the first time; using copper nitrate and perchlorate salts during the syntheses turned out to be the key to avoiding the formation of copper hydroxide sideproducts. Based on the use of the optimized syntheses parameters, the preparation of layered triple and multiple hydroxides was also attempted using Ni(II), Co(II), Zn(II) and even Mg(II) ions. These studies let us identify the relative positions of the incorporating cations in the well-known selectivity series as Ni2+ >> Cu2+ >> Zn2+ > Co2+ >> Mg2+. The solids formed were characterized by using powder X-ray diffractometry, UV-Vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. The catalytic potential of the samples was investigated in carbon monoxide oxidation reactions at atmospheric pressure, supported by an in situ diffuse reflectance infrared spectroscopy probe. All solids proved to be active and the combination of the nickel and cobalt incorporation (which resulted in a NiCoAl8 layered triple hydroxide) brought outstanding benefits regarding low-temperature oxidation and increased carbon monoxide conversion values.

Copper-Loaded Layered Bismuth Subcarbonate-Efficient Multifunctional Heterogeneous Catalyst for Concerted C-S/C-N Heterocyclization.

An efficient self-supported Cu(II)Bi(III) bimetallic catalyst with a layered structure was designed and developed. By careful characterization of the as-prepared material, the host structure was identified to exhibit a Sillen-type bismutite framework, with copper(II) ions being loaded as guests. The heterogeneous catalyst enabled C-N and C-S arylations under mild reaction conditions and with high chemoselectivities, thus furnishing valuable phenothiazines via heterocyclization with wide substrate tolerance. As corroborated by detailed catalytic studies, the cooperative, bifunctional catalyst, bearing Lewis acid sites along with copper(II) catalytic sites, facilitated an intriguing concerted C-N/C-S heterocyclization mechanism. The heterogeneous nature of the catalytic reactions was verified experimentally. Importantly, the catalyst was successfully recycled and reused multiple times, persevering its original structural order as well as its initial activity.

The Effect of Molecular Weight on the Solubility Properties of Biocompatible Poly(ethylene succinate) Polyester.

Poly(ethylene succinate) (PES) is one of the most promising biodegradable and biocompatible polyesters and is widely used in different biomedical applications. However, little information is available on its solubility and precipitation properties, despite that these solution behavior properties affect its applicability. In order to systematically study these effects, biodegradable and biocompatible poly(ethylene succinate) (PES) was synthesized using ethylene glycol and succinic acid monomers with an equimolar ratio. Despite the optimized reaction temperature (T = 185 °C) of the direct condensation polymerization, relatively low molecular mass values were achieved without using a catalyst, and the Mn was adjustable with the reaction time (40-100 min) in the range of ~850 and ~1300 Da. The obtained crude products were purified by precipitation from THF ("good" solvent) with excess of methanol ("bad" solvent). The solvents for PES oligomers purification were chosen according to the calculated values of solubility parameters by different approaches (Fedors, Hoy and Hoftyzer-van Krevelen). The theta-solvent composition of the PES solution was 0.3 v/v% water and 0.7 v/v% DMSO in this binary mixture. These measurements were also allowed to determine important parameters such as the coefficients A (=0.67) and B (=3.69 × 104) from the Schulz equation, or the Kη (=8.22 × 10-2) and α (=0.52) constants from the Kuhn-Mark-Houwink equation. Hopefully, the prepared PES with different molecular weights is a promising candidate for biomedical applications and the reported data and constants are useful for other researchers who work with this promising polyester.

Oxidation of Cysteinate Anions Immobilized in the Interlamellar Space of CaAl-Layered Double Hydroxide.

L-Cysteinate-intercalated CaAl-layered double hydroxide (LDH) was prepared by the co-precipitation method producing highly crystalline hydrocalumite phase with a well-pillared interlayer gallery. The obtained materials were characterized by X-ray diffractometry, IR as well as Raman spectroscopies. By performing interlamellar oxidation reactions with peracetic acid as oxidant, oxidation of cysteinate to cystinate in aqueous and cysteinate sulfenic acid in acetonic suspensions occurred. The oxidations could be performed under mild conditions, at room temperature, under neutral pH and in air. It has been shown that the transformation pathways are due to the presence of the layered structure, that is, the confined space of the LDH behaved as molecular reactor.

Differential Precipitation of Mg(OH)2 from CaSO4·2H2O Using Citrate as Inhibitor-A Promising Concept for Reagent Recovery from MgSO4 Waste Streams.

In hydrometallurgical processing and acidic wastewater treatment, one of the neutralizing agents employed is MgO or Mg(OH)2. At the end of this process, the resulting solution, which is rich in SO42- and Mg2+ is treated with lime to remove (or minimize the amount) of these ions via the precipitation of Mg(OH)2 and CaSO4·2H2O (gypsum). In our work, an attempt was made to separate the two solids by increasing the induction time of the gypsum precipitation, thus regenerating relatively pure Mg(OH)2 which could be reused in wastewater treatments or hydrometallurgical processing circuits, and in this way, significantly enhancing the economic viability of the process. During our experiments, the reaction of an MgSO4 solution with milk of lime prepared from quicklime was studied. The effects of a range of organic additives, which can slow down the precipitation of gypsum have been assessed. The process was optimized for the most promising inhibiting agent-that is, the citrate ion. The reactions were continuously monitored in situ by conductometric measurements with parallel monitoring of solution pH and temperature. ICP-OES measurements were also carried out on samples taken from the reaction slurry. The composition of the precipitating solids at different reaction times was established by powder XRD and their morphology by SEM. Finally, experiments were carried out to locate the additive after the completion of the precipitation reaction to get information about its potential reuse.

Equilibria and Dynamics of Sodium Citrate Aqueous Solutions: The Hydration of Citrate and Formation of the Na3Cit0 Ion Aggregate.

Sodium citrate (Na3Cit) has a crucial role in many biological and industrial processes. Yet, quantitative information on its hydration and the ion association between Na+ and Cit3- ions in a broad range of salt concentrations is still lacking. In this work, we study both ion association equilibria and relaxation dynamics of sodium citrate solutions by combining potentiometry, spectrophotometry, and dielectric spectroscopy. From photometric and potentiometric measurements, we detect the formation of the NaCit2- ion-pair and the neutral Na3Cit0 ion aggregate in a wide range of ionic strengths (0.5-4 M). Due to its remarkable stability, the latter becomes the prevailing species at higher salt concentrations. In the dielectric spectra, we observe the dipolar relaxation of Cit3- and NaCit2- and two solvent-related processes, associated with the collective rearrangement of the H-bond network (cooperative water mode) and the H-bond flip of water molecules (fast water mode). Unlike numerous other salt solutions, the relaxation time of the cooperative mode scales with the viscosity indicating that the strongly hydrated anion fits well into the water network. That is, the stabilizing effect of anion-solvent interactions on the H-bond network outweighs the destructive impact of the cations as the latter are only present at low concentration, due to strong ion association. In conclusion, the affinity of citrate toward Na+ binding not only governs solution equilibria but also has a strong impact on water dynamics.

The Structure and Thermal Properties of Solid Ternary Compounds Forming with Ca2+, Al3+ and Heptagluconate Ions.

In the present work, the structure and thermal stability of Ca-Al mixed-metal compounds, relevant in the Bayer process as intermediates, have been investigated. X-ray diffraction (XRD) measurements revealed the amorphous morphology of the compounds, which was corroborated by SEM-EDX measurements. The results of ICP-OES and UV-Vis experiments suggested the formation of three possible ternary calcium aluminum heptagluconate (Ca-Al-Hpgl) compounds, with the formulae of CaAlHpgl(OH)40, Ca2AlHpgl2(OH)50 and Ca3Al2Hpgl3(OH)90. Additional IR and Raman experiments revealed the centrally symmetric arrangement of heptagluconate around the metal ion. The increased thermal stability was demonstrated by thermal analysis of the solids and confirmed our findings.

Ultrasound-Assisted Hydrazine Reduction Method for the Preparation of Nickel Nanoparticles, Physicochemical Characterization and Catalytic Application in Suzuki-Miyaura Cross-Coupling Reaction.

In the experimental work leading to this contribution, the parameters of the ultrasound treatment (temperature, output power, emission periodicity) were varied to learn about the effects of the sonication on the crystallization of Ni nanoparticles during the hydrazine reduction technique. The solids were studied in detail by X-ray diffractometry, dynamic light scattering, thermogravimetry, specific surface area, pore size analysis, temperature-programmed CO2/NH3 desorption and scanning electron microscopy. It was found that the thermal behaviour, specific surface area, total pore volume and the acid-base character of the solids were mainly determined by the amount of the nickel hydroxide residues. The highest total acidity was recorded over the solid under low-power (30 W) continuous ultrasonic treatment. The catalytic behaviour of the nanoparticles was tested in a Suzuki-Miyaura cross-coupling reaction over five samples prepared in the conventional as well as the ultrasonic ways. The ultrasonically prepared catalysts usually performed better, and the highest catalytic activity was measured over the nanoparticles prepared under low-power (30 W) continuous sonication.

Magnesium(II) d-Gluconate Complexes Relevant to Radioactive Waste Disposals: Metal-Ion-Induced Ligand Deprotonation or Ligand-Promoted Metal-Ion Hydrolysis?

The complexation equilibria between Mg2+ and d-gluconate (Gluc-) ions are of particular importance in modeling the chemical speciation in low- and intermediate-level radioactive waste repositories. NMR measurements and potentiometric titrations conducted at 25 °C and 4 M ionic strength revealed the formation of the MgGluc+, MgGlucOH0, MgGluc(OH)2-, and Mg3Gluc2(OH)40 complexes. The trinuclear species provides indirect evidence for the existence of multinuclear magnesium(II) hydroxido complexes, whose formation was proposed earlier but has not been confirmed yet. Additionally, speciation calculations demonstrated that MgCl2 can markedly decrease the solubility of thorium(IV) at low ligand concentrations. Regarding the structure of MgGluc+, both IR spectra and density functional theory (DFT) calculations indicate the monodentate coordination of Gluc-. By the potentiometric data, the acidity of the water molecules is higher in the MgGluc+ and MgGlucOH0 species than in the Mg(H2O)62+ aqua ion. On the basis of DFT calculations, this ligand-promoted hydrolysis is caused by strong hydrogen bonds forming between Gluc- and Mg(H2O)62+. Conversely, metal-ion-induced ligand deprotonation takes place in the case of calcium(II) complexes, giving rise to salient variations on the NMR spectra in a strongly alkaline medium.

Effects of ultrasonic irradiation on the synthesis, crystallization, thermal and dissolution behaviour of chloride-intercalated, co-precipitated CaFe-layered double hydroxide.

The output power (30-150 W) and the periodicity (20-100%) of ultrasound emission were varied in a wide range to regulate and improve the crystallization process in the commonly used co-precipitation technique of chloride-intercalated CaFe-layered double hydroxides. The influence of ultrasound irradiation on the as-prepared materials was studied by X-ray diffractometry, dynamic light scattering, UV-Vis-NIR diffuse reflectance spectroscopy, specific surface area measurement, pore size analysis, ion-selective electrode potentiometric investigations and thermogravimetry. Additionally, structural alterations due to heat treatment at various temperatures were followed in detail by Fourier-transform infrared and X-ray absorption spectroscopies as well as scanning electron microscopy. The ultrasonic treatment was capable of controlling the sizes of primarily formed (from 19 nm to 30 nm) as well as the aggregated (secondary) particles (between 450 nm and 700 nm), and thus modifying their textural parameters and enhancing the incorporation of chloride anions into the interlamellar space. For the first time, the optical energy gap of CaFe-LDH was reported here depending on the nature of applied stirring (4.18-4.34 eV). The heat-treatment investigations revealed that the layered structure was stabile until 200 °C, even at the atomic level.

Ball Milling of Copper Powder Under Dry and Surfactant-Assisted Conditions-On the Way Towards Cu/Cu2O Nanocatalyst.

Samples of copper powder was milled with varied grinding frequencies in the presence of various organic agents (oleylamine, ethylene glycol or dimethyl sulfoxide) or without additives. The effects of experimental conditions were investigated by X-ray diffractometry, scanning electron microscopy and dynamic light scattering measurements. The aggregation of particles were supressed by added organics. The catalytic activities of the variously treated samples were measured in the Ullmanntype reaction of iodobenzene and 1H-pyrazole.

The Synthesis and Use of Nano Nickel Catalysts.

The hydrazine reduction method was applied for the synthesis of nickel nanoparticles without using inert atmosphere and added surface active agents. The effect of the preparation temperature and the chemical quality of the metal sources as well as the solvents were studied. The generation of nanoparticles were studied primarily by X-ray diffractometry, but scanning and transmission electron microscopies as well as dynamic light scattering measurements were also used for the better understanding of the nanoparticles behaviour. The elevation of temperature was the key point in transforming Ni(OH)2 into metallic nickel. By selecting the metal source, the obtained crystallite sizes could be tailored between 7 nm and 15 nm; however, the SEM and DLS measurements revealed significant agglomeration resulting in aggregates with spherical or Ni(OH)2 resembling morphologies depending on the solvent used. The catalytic activities of the nanoparticles prepared were tested and compared in a Suzuki-Miyaura cross-coupling reaction.

The acidity and self-catalyzed lactonization of l-gulonic acid: Thermodynamic, kinetic and computational study.

Lactonization and proton dissociation of sugar acids take place simultaneously in acidic aqueous solutions. The protonation-deprotonation processes are always fast, whilst the formation and hydrolysis of γ- and δ-lactones are usually slower. Thus, both thermodynamic and kinetic information are required for the complete understanding of these reactions. The protonation constant (Kp) of l-gulonate (Gul-) was determined from potentiometric and polarimetric measurements, while the individual lactonization constants (KL,γ and KL,δ) for l-gulonic acid (HGul) were obtained via13C NMR experiments. The applicability of this method was proven by measuring these well-known constants for d-gluconic acid (HGluc) and by comparing them to literature data. l-gulonic acid γ-lactone (γ-HGul) has remarkable stability in contrast with δ-HGul as well as γ- and δ-HGluc. The polarimetric measurement implies that the main factor responsible for the enhanced stability of γ-HGul is that its hydrolysis is much slower than that of δ-HGul. This higher stability of the γ-HGul ring over its δ-isomer was also confirmed by quantum chemical calculations. A new confirmed feature of the reaction is that in parallel to H3O+, HGul also catalyzes the formation and reverse hydrolytic processes of γ-HGul, similarly to other general acid catalysts.

Configuration-dependent complex formation between Ca(II) and sugar carboxylate ligands in alkaline medium: Comparison of L-gulonate with D-gluconate and D-heptaguconate.

The calcium sugar carboxylate interactions in hyperalkaline solutions are of relevance in radioactive waste repositories and in certain industrial processes. The complex formation between L-gulonate and Ca2+ ions was studied in strongly alkaline medium at 25 °C and 1 M ionic strength and was compared with previous results reported for D-gluconate and D-heptagluconate. The deprotonation of the ligand was confirmed by potentiometric and 13C NMR spectroscopic measurements. Pronounced pH effects were seen in the presence of Ca2+ indicating strong complex formation. By the evaluation of the experimental data, two highly stable trinuclear species, Ca3Gul2H-3+ and the Ca3Gul2H-40, are formed in alkaline aqueous solutions. Polarimetric as well as 1H NMR spectroscopic measurements attested that the increased complex stability was due to the formation of strong metal ion - alcoholate interactions. Moreover, the 1H NMR spectra of the three anions refer to the role of configuration in metal ion-binding. That is, the participation of the C3-OH or C4-OH group is governed by the relative position (i.e., threo or erythro) of the C2-OH and C3-OH groups.

Ultrasonically-enhanced preparation, characterization of CaFe-layered double hydroxides with various interlayer halide, azide and oxo anions (CO32-, NO3-, ClO4-).

An ultrasonically-enhanced mechanochemical method was developed to synthesize CaFe-layered double hydroxides (LDHs) with various interlayer anions (CO32-, NO3-, ClO4-, N3-, F-, Cl-, Br- and I-). The duration of pre-milling and ultrasonic irradiation and the variation of synthesis temperature in the wet chemical step were investigated to obtain the optimal parameters of preparation. The main method to characterize the products was X-ray diffractometry, but infrared and synchrotron-based X-ray absorption spectroscopies as well as thermogravimetric measurements were also used to learn about fine structural details. The synthesis method afforded successful intercalation of the anions, among others the azide anion, a rarely used counter ion providing a system, which enables safe handling the otherwise highly reactive anion. The X-ray absorption spectroscopic measurements revealed that the quality of the interlayered anions could modulate the spatial arrangement of the calcium ions around the iron(III) ions, but only in the second coordination sphere.

Formation of mono- and binuclear neodymium(iii)-gluconate complexes in aqueous solutions in the pH range of 2-8.

The complex formation between Nd(iii) and d-gluconate (Gluc-) is of relevance in modelling the chemical equilibria of radioactive waste repositories. In the present work, the formation of NdpGlucqH-r complexes at 25 °C and pH = 2-8 was studied via spectrophotometry, potentiometry, freezing point depression, conductometry and NMR spectroscopy. In addition to the four mononuclear complexes (pq-r = 110, 120, 130 and 11-2), the formation of two binuclear, so far unknown complexes (pq-r = 23-2 and 24-2) was revealed. Between pH = 5.5 and 7, with the increasing metal ion and ligand concentrations, the Nd2Gluc3H-2+ species becomes progressively predominant. Under the conditions characteristic of waste repositories, however, the formation of these complexes can be neglected. Regarding the binding sites of Gluc-, C2-OH and C3-OH groups, in addition to the carboxylate ion, were identified from 1H and 13C spectroscopic measurements. Above pH = 6, the metal-ligand interactions became stronger implying the formation of deprotonated complexes involving the C2-OH group, while the displacement of the second proton at the C3-OH is also possible. The metal ion induced deprotonation of the ligand was confirmed by DFT calculations.

ML and ML2 complex formation between Ca(ii) and d-glucose derivatives in aqueous solutions.

The complex formation equilibria between Ca2+ ions and six carbohydrate derivatives related to d-glucose was quantitatively characterized by potentiometry, freezing point depression and polarimetry. Complexation could not be observed for d-glucose, while weak association was deduced for d-sorbitol and d-mannitol. Stronger complexes are formed with d-gluconate and d-heptagluconate due to the presence of the carboxylate group. In addition to the plausible 1 : 1 species, the 1 : 2 species can also be detected at higher ligand to metal ratios. The ML type complex is also formed with d-glucuronate and d-glucarate. The strong association for d-gluconate and d-heptagluconate was attested by freezing point depression measurements. Polarimetric results show that for these two ligands the specific rotation of the complexed and free anions is only slightly different. The stability of the 1 : 1 complexes follows the order: mannitol < sorbitol < glucuronate < heptagluconate ≈ gluconate < glucarate. The formation of the ML2 type species has been established for polyhydroxy ligands having at least one carboxylate group in addition to the conformational flexibility.