ABSTRACT
Thailand's hospitals face overcrowding, particularly with non-communicable disease (NCD) patients, due to a doctor shortage and an aging population. Most literature showed implementation merely on web or mobile application to teleconsult with physicians. Instead, in this work, we developed and implemented a telemedicine health kiosk system embedded with non-invasive biosensors and time-series predictors to improve NCD indicators over an eight-month period. Two cohorts were randomly selected: a control group with usual care and a telemedicine-using group. The telemedicine-using group showed significant improvements in average fasting blood glucose (148 to 130 mg/dL) and systolic blood pressure (152 to 138 mmHg). Data mining with the Apriori algorithm revealed correlations between diseases, occupations, and environmental factors, informing public health policies. Communication between kiosks and servers used LoRa, 5G, and IEEE802.11, which are selected based on the distance and signal availability. The results support telemedicine kiosks as effective for NCD management, significantly improving key NCD indicators, average blood glucose, and blood pressure.
Subject(s)
Blood Glucose , Blood Pressure , Noncommunicable Diseases , Telemedicine , Humans , Blood Pressure/physiology , Blood Glucose/analysis , Biosensing Techniques/methods , Male , Algorithms , Female , Middle AgedABSTRACT
A novel way to enhance modulation performance is through the design of a hybrid plasmonic optical modulator that integrates multi-layer graphene and TiO2on silicon waveguides. In this article, a design is presented of a proposed modulator based on the use of the two-dimensional finite difference eigenmode solver, the three-dimensional eigenmode expansion solver, and the CHARGE solver. Leveraging inherent graphene properties and utilizing the subwavelength confinement capabilities of hybrid plasmonic waveguides (HPWs), we achieved a modulator design that is both compact and highly efficient. The electrical bandwidthf3dBis at 460.42 GHz and it reduces energy consumption to 12.17 fJ/bit with a modulator that functions at a wavelength of 1.55µm. According to our simulation results, our innovation was the optimization of the third dielectric layer's thickness, setting the stage to achieve greater modulation depths. This synergy between graphene and HPWs not only augments subwavelength confinement, but also optimizes light-graphene interaction, culminating in a markedly enhanced modulation efficiency. As a result, our modulator presents a high extinction ratio and minimized insertion loss. Furthermore, it exhibits polarization insensitivity and a greater bandwidth. Our work sets a new benchmark in optical communication systems, emphasizing the potential for the next generation of chip-scale with high-efficiency optical modulators that significantly outpace conventional graphene-based designs.
ABSTRACT
Triboelectric nanogenerators (TENGs) are crucial for applications such as smart sensors and bio-electronics. In the current work, we aimed for improved performance of TENGs with incorporation of BaTiO3powder, which is known for its strong ferroelectric properties, combining it with epoxy resin to improve the flexibility of our devices. We observed that our TENGs can operate for over 24 000 cycles with no degradation of function. Additionally, we improved the electrical performance of the TENGs by incorporating various aluminum concentrations that change the electronic properties in the form of mixed epoxy resin, BaTiO3, and Al nanopowders. To identify the optimum conditions for the best performance, we analyzed the electrical characteristics and material properties by employing scanning electron microscopy, energy dispersive x-ray spectroscopy, and x-ray diffractometry characterization techniques. Our findings suggest that this innovative combination of materials and optimization techniques can significantly improve the performance of TENGs, making them ideal for practical applications in various fields, such as low-power electronics, environmental monitoring and healthcare. Moreover, these enhanced TENGs can serve as sustainable and dependable energy sources for various applications.
ABSTRACT
In this work, we report a low-cost and highly sensitive electrochemical sensor for detecting As(III) in water. The sensor uses a 3D microporous graphene electrode with nanoflowers, which enriches the reactive surface area and thus enhances its sensitivity. The detection range achieved was 1-50 ppb, meeting the US-EPA cutoff criteria of 10 ppb. The sensor works by trapping As(III) ions using the interlayer dipole between Ni and graphene, reducing As(III), and transferring electrons to the nanoflowers. The nanoflowers then exchange charges with the graphene layer, producing a measurable current. Interference by other ions, such as Pb(II) and Cd(II), was found to be negligible. The proposed method has potential for use as a portable field sensor for monitoring water quality to control hazardous As(III) in human life.
ABSTRACT
In this work, we propose exchange-coupled-composite-bit-patterned media (ECC-BPM) with microwave-assisted magnetic recording (MAMR) to improve the writability of the magnetic media at a 4 Tb/in2 recording density. The suitable values of the applied microwave field's frequency and the exchange coupling between magnetic dots, Adot, of the proposed media were evaluated. It was found that the magnitude of the switching field, Hsw, of the bilayer ECC-BPM is significantly lower than that of a conventional BPM. Additionally, using the MAMR enables further reduction of Hsw of the ECC-BPM. The suitable frequency of the applied microwave field for the proposed media is 5 GHz. The dependence of Adot on the Hsw was additionally examined, showing that the Adot of 0.14 pJ/m is the most suitable value for the proposed bilayer ECC-BPM. The physical explanation of the Hsw of the media under a variation of MAMR and Adot was given. Hysteresis loops and the magnetic domain of the media were characterized to provide further details on the results. The lowest Hsw found in our proposed media is 12.2 kOe, achieved by the bilayer ECC-BPM with an Adot of 0.14 pJ/m using a 5 GHz MAMR.
ABSTRACT
Current-perpendicular-to-the-plane giant magnetoresistance (CPP-GMR) read sensors based on Heusler alloys are promising candidates for ultrahigh areal densities of magnetic data storage technology. In particular, the thickness of reader structures is one of the key factors for the development of practical CPP-GMR sensors. In this research, we studied the dependence of the free layer thickness on the stability of the Co2(Mn0.6Fe0.4)Ge Heusler-based CPP-GMR read head for an areal density of 1 Tb/in2, aiming to determine the appropriate layer thickness. The evaluations were done through simulations based on micromagnetic modelling. The reader stability indicators, including the magnetoresistance (MR) ratio, readback signal, dibit response asymmetry parameter, and power spectral density profile, were characterized and discussed. Our analysis demonstrates that the reader with a free layer thickness of 3 nm indicates the best stability performance for this particular head. A reasonably large MR ratio of 26% was obtained by the reader having this suitable layer thickness. The findings can be utilized to improve the design of the CPP-GMR reader for use in ultrahigh magnetic recording densities.