Supportive care needs of patients following treatment for colorectal cancer: risk factors for unmet needs and the association between unmet needs and health-related quality of life-results from the ColoREctal Wellbeing (CREW) study.

PURPOSE: To investigate unmet needs of patients with colorectal cancer (CRC) at the end of treatment and whether unmet needs improve over time. Identify predictors of need following treatment and whether unmet need is associated with worse health-related quality of life (HRQoL). METHODS: As part of the UK ColoREctal Wellbeing (CREW) cohort study, patients treated for CRC completed the Supportive Care Needs Survey Short Form-34 (SCNS SF-34) 15 and 24 months following surgery, along with questionnaires measuring HRQoL, wellbeing, life events, social support, and confidence to manage their cancer before surgery, 3, 9, 15, and 24 months post-surgery. RESULTS: The SCNS SF-34 was completed by 526 patients at 15 months and 510 patients at 24 months. About one-quarter of patients had at least one moderate or severe unmet need at both time points. Psychological and physical unmet needs were the most common and did not improve over time. Over 60% of patients who reported 5 or more moderate or severe unmet needs at 15 months experienced the same level of unmet need at 24 months. HRQoL at the beginning of treatment predicted unmet needs at the end of treatment. Unmet needs, specifically physical, psychological, and health system and information needs, were associated with poorer health and HRQoL at the end of treatment. CONCLUSIONS: Unmet needs persist over time and are associated with HRQoL. Evaluation of HRQoL at the start of treatment would help inform the identification of vulnerable patients. Assessment and care planning in response to unmet needs should be integrated into person-centred care. IMPLICATIONS FOR CANCER SURVIVORS: Early identification of CRC patients at risk of unmet needs will help infrom personalised survivorship care plans. The implementation of personalised and tailored services are likely to confer HRQoL gains.

Cancer survivors' self-efficacy to self-manage in the year following primary treatment.

PURPOSE: Cancer survivors are increasingly expected to manage the consequences of cancer and its treatment for themselves. There is evidence that self-efficacy is important for successful self-management and that this can be enhanced with support. The purpose of this study was to assess self-efficacy to manage problems in the year following primary treatment. METHODS: This cross-sectional online survey included cancer survivors who had completed their treatment within the past 12 months. Self-efficacy was assessed and variables expected to be associated with self-efficacy were measured using validated scales including quality of life, well-being, illness perceptions, depression and social support. RESULTS: One hundred eighty-two respondents (mean age 50; 81% female) completed the survey. They had been treated for a range of cancers; most commonly breast (45%). Self-efficacy scores varied between individuals and according to the illness-related task to be managed. Respondents were least confident in managing fatigue and most confident in accessing information about their cancer. Individuals most likely to report low self-efficacy were women, those experiencing higher levels of pain and/or depression, lower well-being scores, lower socio-economic status, low levels of social support, or a more negative perception of cancer. CONCLUSIONS: Self-efficacy to self-manage problems faced as a consequence of cancer and its treatment can vary widely in the year following treatment. Fatigue may be particularly difficult to manage. IMPLICATIONS FOR CANCER SURVIVORS: Variations in self-efficacy highlight the importance of assessing specific problems faced and people's confidence to manage them in order to tailor appropriate self-management support.

Dynamic CT for parathyroid disease: are multiple phases necessary?

BACKGROUND AND PURPOSE: A 4D CT protocol for detection of parathyroid lesions involves obtaining unenhanced, arterial, early, and delayed venous phase images. The aim of the study was to determine the ideal combination of phases that would minimize radiation dose without sacrificing diagnostic accuracy. MATERIALS AND METHODS: With institutional review board approval, the records of 29 patients with primary hyperparathyroidism who had undergone surgical exploration were reviewed. Four neuroradiologists who were blinded to the surgical outcome reviewed the imaging studies in 5 combinations (unenhanced and arterial phase; unenhanced, arterial, and early venous; all 4 phases; arterial alone; arterial and early venous phases) with an interval of at least 7 days between each review. The accuracy of interpretation in lateralizing an abnormality to the side of the neck (right, left, ectopic) and localizing it to a quadrant in the neck (right or left upper, right or left lower) was evaluated. RESULTS: The lateralization and localization accuracy (90.5% and 91.5%, respectively) of the arterial phase alone was comparable with the other combinations of phases. There was no statistically significant difference among the different combinations of phases in their ability to lateralize or localize adenomas to a quadrant (P = .976 and .996, respectively). CONCLUSIONS: Assessment of a small group of patients shows that adequate diagnostic accuracy for parathyroid adenoma localization may be achievable by obtaining arterial phase images alone. If this outcome can be validated prospectively in a larger group of patients, then the radiation dose can potentially be reduced to one-fourth of what would otherwise be administered.

Quantitative light-induced fluorescence (QLF): a tool for early occlusal dental caries detection and supporting decision making in vivo.

OBJECTIVES: This study reports the development and assessment of a novel method using quantitative light-induced fluorescence (QLF), to determine whether QLF parameters ΔF and ΔQ were appropriate for aiding diagnosis and clinical decision making of early occlusal mineral loss by comparing QLF analysis with actual restorative management. METHODS: Following ethical approval, 46 subjects attending a dental teaching hospital were enrolled. White light digital (WL) and QLF images/analyses of 46 unrestored posterior teeth with suspected occlusal caries were made after a clinical decision had already been taken to explore fissures operatively. WL and QLF imaging/analysis were repeated after initial cavity preparation. The type of restorative treatment was determined by the supervising clinician independent of any imaging performed. Actual restorative management carried out was recorded as fissure sealant/preventive resin restoration (F/P) or class I occlusal restoration (Rest.) thus reflecting the extent of intervention (=gold standard). All QLF images were analysed independently. RESULTS: The results showed statistically significant differences between the two treatment groups ΔF (p=0.002) (mean 22.60 - F/P and 28.80 - Rest.) and ΔQ (p=0.012) (mean 230.49 - F/P and 348.30 - Rest.). CONCLUSIONS: ΔF and ΔQ values may be useful in aiding clinical diagnosis and decision making in relation to the management of early mineral loss and restorative intervention of occlusal caries. CLINICAL SIGNIFICANCE: QLF has the potential to be a valuable tool for caries diagnosis in clinical practice.

Effect of post-brushing mouthwash solutions on salivary fluoride retention--study 2.

OBJECTIVE: This study evaluated the effects of three post-brushing mouthwashes containing 0 ppm F, 225 ppm F, and 500 ppm F, respectively, on salivary fluoride retention after brushing with 1450 ppm fluoride (as NaF) toothpaste and rinsing with water immediately after brushing. METHODS: In this three-phase, randomized, cross-over study, an ion-specific electrode was used to measure salivary F levels in thirty trial participants before brushing (Time 0), and after brushing, rinsing with water, and then rinsing with one of the three mouthwashes. Time points evaluated after brushing were one, three, five, 10, 20, 30, 45, and 60 minutes. For saliva sample collections, subjects were asked to pool saliva in their mouths for 10 seconds before spitting out into a container for each of the time points. RESULTS: The AUC0-60 means for F in saliva were 554, 252, and 20 for the 500, 225, and 0 ppm F mouthwash groups, respectively. The 500 ppm F mouthwash resulted in a 2660% increase in total fluoride salivary retention over 60 minutes when compared with the 0 ppm F group, and a 120% increase when compared with the 225 ppm F group. A significant difference (p < 0.001) in the AUC0-60 means between the three groups was observed using analysis of variance (ANOVA). Paired t-tests also showed significant differences in the mean fluoride retention over 60 minutes for all three pair-wise group comparisons (p < 0.001). CONCLUSION: Use of a fluoride mouthwash containing 225 ppm F or 500 ppm F produced a significant increase in salivary fluoride retention following brushing with a 1450 ppm F toothpaste and rinsing with water compared to rinsing without fluoride. The use of the 500 ppm F mouthwash may be of particular benefit to those at high caries risk.

Fecal microbiota transplantation for fulminant Clostridium difficile infection in an allogeneic stem cell transplant patient.

We present a case of severe Clostridium difficile infection (CDI) in a non-neutropenic allogeneic hematopoietic stem cell transplant recipient who was treated successfully with fecal microbiota therapy after standard pharmacologic therapy had failed. Following naso-jejunal instillation of donor stool, the patient's symptoms resolved within 48 h. Bowel resection was averted. This is the first case in the literature, to our knowledge, to describe fecal microbiota therapy in a profoundly immunocompromised host with severe CDI. We propose that fecal microbiota therapy be considered as a therapeutic option in immunosuppressed patients with refractory severe CDI.

Colour match between porcelain and porcelain-repairing resin composites.

The aim of this study was to evaluate the differences in colour between dental porcelain and porcelain-repairing resin composites. Porcelain discs were fabricated using four dentine shades in 1mm and 2mm thicknesses. Another series of discs was fabricated in 1mm and 2 mm thicknesses using three different brands of composite. Four single shades were used for the 1mm thick discs, and four single and 12 combined shades for the 2mm thick discs. The colour was measured using a spectrophotometer and colour differences deltaE* were calculated between samples. Colour differences were in the range of (deltaE* = 3.5-26.9), above the accepted threshold for perceptibility (deltaE* > 1) with a number above the threshold for what is considered to be clinically acceptable (deltaE* > 5.5). Improvements in colour match were seen for certain shade combinations of repairing composites, in contrast to when a single shade of composite was used.

Phosphorylation of RelA/p65 promotes DNMT-1 recruitment to chromatin and represses transcription of the tumor metastasis suppressor gene BRMS1.

The majority of patients with lung cancer present with metastatic disease. Chronic inflammation and subsequent activation of nuclear factor-κB (NF-κB) have been associated with the development of cancers. The RelA/p65 subunit of NF-κB is typically associated with transcriptional activation. In this report we show that RelA/p65 can function as an active transcriptional repressor through enhanced methylation of the BRMS1 (breast cancer metastasis suppressor 1) metastasis suppressor gene promoter via direct recruitment of DNMT-1 (DNA (cytosine-5)-methyltransferase 1) to chromatin in response to tumor necrosis factor (TNF). TNF-mediated phosphorylation of S276 on RelA/p65 is required for RelA/p65-DNMT-1 interactions, chromatin loading of DNMT-1 and subsequent BRMS1 promoter methylation and transcriptional repression. The ability of RelA/p65 to function as an active transcriptional repressor is promoter specific, as the NF-κB-regulated gene cIAP2 (cellular inhibitor of apoptosis 2) is transcriptionally activated whereas BRMS1 is repressed under identical conditions. Small-molecule inhibition of either of the minimal interacting domains between RelA/p65-DNMT-1 and RelA/p65-BRMS1 promoter abrogates BRMS1 methylation and its transcriptional repression. The ability of RelA/p65 to directly recruit DNMT-1 to chromatin, resulting in promoter-specific methylation and transcriptional repression of tumor metastasis suppressor gene BRMS1, highlights a new mechanism through which NF-κB can regulate metastatic disease, and offers a potential target for newer-generation epigenetic oncopharmaceuticals.

The health and well-being of cancer survivors in the UK: findings from a population-based survey.

BACKGROUND: To compare self-reported health and well-being in a sample of cancer survivors with individuals who have not had cancer and with individuals who have a serious chronic condition other than cancer. PATIENTS AND METHODS: A cross-sectional survey drawn from an online panel of 400,000 UK citizens supplemented with other online recruitment and telephone recruitment. The participants were 4892 individuals 30 years of age or above, including 780 individuals with a previous cancer diagnosis, 1372 individuals with one or more of 10 chronic conditions but not cancer and 2740 individuals without a previous cancer diagnosis or chronic condition. Thirteen measures of health and well-being were constructed from answers to 25 survey items covering physical, psychological and social dimensions of health and well-being. RESULTS: Cancer survivors were significantly more likely to report poor health outcomes across all 13 measures than those with no history of cancer or a chronic condition. The adjusted odds ratios for cancer survivors with no chronic conditions compared with healthy participants ranged from 1.37 (95% confidence interval (CI): 1.31-1.96) for emotional well-being to 3.34 (95% CI: 2.74-4.08) for number of health professionals consulted in the last 12 months. The health profile of cancer survivors was similar to those with a history of a serious chronic health condition. CONCLUSIONS: A substantial number of individuals who have had a diagnosis of cancer experience ongoing poor health and well-being following cancer and cancer treatment. The results of this study provide an initial basis for the development of specific help and support for cancer survivors.

An investigation into the effect of try-in pastes, uncured and cured resin cements on the overall color of ceramic veneer restorations: an in vitro study.

OBJECTIVES: The aim of this study was to assess how different shades of try-in pastes, uncured and cured resin cements influence the overall color of porcelain veneer restorations. METHODS: Porcelain veneers of shade Vita 1M1 VM7 and 1mm thick were applied to bovine teeth using three shades of resin cement and their try-in paste produced by three manufacturers. Analysis of variance was carried out on the color difference values (ΔE*) between the Aquagel and both the try-in paste and cured resins. An assessment of the clinical significance of ΔE* between the try-in paste and the cured resin and also between the uncured and cured resin was made. RESULTS: There were statistically significant differences in veneers' colors when using different shades of both Calibra and Nexus resin cements (p<0.05). Also, statistically significant differences were noticed when using different shades of both Rely-X and Nexus try-in pastes (p<0.05). Color differences produced between the try-in pastes and the corresponding shades of cured resin cements ranged from ΔE* 1.05 to 3.34. The color differences between uncured and cured resins of the same shade ranged from ΔE* 0.78 to 1.41. CONCLUSIONS: Different colored try-in pastes and resin cements produced color changes which are clinically useful in changing the color of veneer restorations and therefore aid color matching to adjacent dentition. Clinically significant differences were found between try-in pastes and the cured resin of the same shade, however, there were relatively small changes measured between uncured and cured resins. The color match achieved by the try-in paste has to be treated with caution and further assessment of the restoration made with the resin in place before curing is recommended.

QLF is not readily suitable for in vivo denture plaque assessment.

OBJECTIVES: Current methods available for denture plaque assessment utilise visual and planimetric techniques. This paper evaluates the use of the Quantitative Light-induced Fluorescence system (QLF) in image capture of denture plaque and the suitability of these images for planimetric plaque measurement. It is proposed that fluorescence imaging could provide a valuable and sensitive standardising method for plaque assessment in clinical trials for denture cleansing products and denture hygiene. Indeed, the detection of red fluorescent plaque using the QLF system is indicative of black-pigmented obligate anaerobes and mature plaque. METHODS: The QLF system was evaluated in a clinical study for use in denture plaque assessment in comparison to white light based image capture. RESULTS: Despite appearing as a promising system for denture plaque quantification, this study revealed numerous problems associated with the QLF system including small focal depth, thus large numbers of images and processing time were required. In addition, differential fluorescence of acrylic made images unsuitable for plaque quantification. CONCLUSION: QLF is unsuitable for in vivo denture plaque assessment. However, the visualisation of red autofluorescence, indicating mature plaque, remains an important clinical use of QLF for denture hygiene assessment.

The influence of varying fluoride concentrations on in vitro remineralisation of artificial dentinal lesions with differing lesion morphologies.

OBJECTIVE: The influence of low-level fluoride (F) concentrations and lesion characteristics on the remineralisation of sub-surface root caries was investigated in vitro. DESIGN: Experimentally produced dentinal carious lesions were exposed to artificial saliva in the presence of 0.00ppm, 0.48ppm, 2.49ppm or 4.91ppm F (as NaF) for 5 days. Calcium, phosphate and fluoride ion uptake was quantified by chemical assay. Baseline changes in the mineral content and distribution of the lesions were assessed by transverse microradiography (TMR). RESULTS: The uptake of calcium and phosphate was significantly increased (p<0.05) by fluoride, even at low concentrations. The action of fluoride was influenced by the mineral content and distribution of the lesions at baseline, however, with the location and degree of mineral deposition being strongly related to the mineral content of the lesions surface layer. CONCLUSIONS: The process of remineralisation of root dentine is multifactorial. The morphology of lesions at baseline significantly affected the location and quantity of mineral deposition.

Linear and quadratic dispersion characterization of millimeter-length fibers and waveguides using common-path interferometry.

We measured linear and quadratic dispersion on millimeter-length fibers, waveguides, and nanowires based on common-path spectral interferometry. We obtained the linear dispersion parameter, beta', with a relative precision of 1.45 x 10(-4), and extracted the quadratic dispersion parameter, beta'', from the Taylor expansion of beta' x beta'' values show a discrepancy of < 1% when compared with simulation as well as with measurement results obtained by a conventional Michelson interferometer. Using this method, we experimentally confirmed the sign inversion of the group velocity dispersion of AlGaAs nanowires for what is believed to be the first time.

The efficacy of techniques for the disinfection of artificial sub-surface dentinal caries lesions and their effect on demineralization and remineralization in vitro.

OBJECTIVES: The efficacy of three techniques for the disinfection of artificial sub-surface root caries lesions and their response to subsequent episodes of de- and remineralization was investigated quantitatively in vitro. METHODS: Sub-surface dentinal lesions (n=20), cut into four experimental blocks and deliberately contaminated with Streptococcus mutans, were subject to either steam autoclaving (121 degrees C, 5min), gamma irradiation (4100Gy), immersion in 0.1% (w/v) thymol-distilled water solution (24h) or reserved as a control. Next, the lesions were incubated aerobically in sterile nutrient broth for 24h at 37 degrees C and resultant cultures plated onto blood agar and neutralisation agar. Ten blocks from each experimental group were then immersed in an acidic buffer solution or exposed to artificial saliva for 5 days. Baseline changes in the mineral content and distribution of the lesions were assessed by transverse microradiography (TMR). RESULTS: Micro-organisms were recovered from each control block and one block treated by gamma irradiation. Steam autoclaving and immersion in a thymol solution significantly decreased (p<0.05) the amount of mineral lost from the body of lesions subject to a further acid challenge. Mineral ion uptake by lesions exposed to artificial saliva was significantly increased (p<0.05) through disinfection by steam autoclaving. CONCLUSIONS: Gamma irradiation proved the most acceptable method for the disinfection of sub-surface root dentine lesions having the least adverse effect on demineralization and remineralization.

Full vectorial modal analysis of specialty fibers and their Bragg grating characterization.

Optical fibers and specialty waveguides are the bases of the majority of today's telecommunication, biomedical, sensing, and light-delivery applications. Modal analysis plays an important role in optimizing the optical performance of these fibers when they are integrated with optical systems. We present a full vectorial modal theoretical analysis of specialty cylindrical symmetric fibers with arbitrary index profiles, using a staircase approximation and scattering matrix approach with no constraints on the refractive index profile. We demonstrate the generality of this method by investigating the modal characteristics of two specialty fibers: graded-index fiber and concentric-shell multicore fiber. The calculated modal effective indices for the graded-index fiber are compared with those calculated by the WKB method, stressing the main differences between the scalar and vectorial approaches. Using the same approach, we calculate the Bragg grating response of a holographic grating written in the guiding regions of a concentric-shell fiber and compared them with experimental measurements.

The microbiological origin of fluorescence observed in plaque on dentures during QLF analysis.

The aim of this study was to determine the microbiological origin of plaque fluorescence observed during quantitative light-induced fluorescence (QLF) analysis. Plaque was sampled from dentures, because of easy accessibility and the homogeneous background provided by the denture tooth during imaging, and the acknowledged comparability to occlusal plaque. Forty removable poly(methyl methacrylate) dentures were screened for the presence of fluorescent plaque deposits during QLF analysis. Dentures were photographed, QLF images were recorded and samples of fluorescent plaque were taken. Plaque samples were cultured on fastidious anaerobe agar, Wilkins Chalgren agar and Sabourauds dextrose agar. Plates were screened under QLF and fluorescent colonies were subcultured and identified. Areas of red, orange and green fluorescence were detected on the fitting and non-fitting surfaces of dentures. The red and orange fluorescing species were Prevotella melaninogenica, Actinomyces israelii and Candida albicans, which are generally acknowledged to be secondary colonisers, present in more mature plaque. Green fluorescence was observed in streptococcal species (early colonisers) and Fusobacterium nucleatum (important organism in plaque development). Non-fluorescent colonies were also cultured. Plaque which accumulates on susceptible surfaces tends to be associated with caries, but it may be its maturity, rather than the presence of cariogenic streptococci, that is more likely to provide a microbiological link between red fluorescence and caries.

Quantification of dental plaque in the research environment.

OBJECTIVES: To review the established and novel methods of plaque quantification employed in dental research, including a discussion of their merits and to present a new method of planimetrically measuring plaque using light induced fluorescence. METHOD: Quantitative light-fluorescence (QLF) images were acquired from the buccal surfaces of an individual who had refrained from oral hygiene both with and without traditional plaque disclosure. Digital photographs were also taken. Images were analysed using a novel method and a percentage plaque index produced. RESULTS: Traditional plaque indices are problematic due to their integral nature and their failure to detect small, but potentially clinically relevant changes in plaque area. The use of a fluorescent technique demonstrated good reliability although there was no correlation between red fluorescent plaque and total disclosed plaque suggesting that the auto-fluorescing plaque is not a good measure of total plaque volume. CONCLUSIONS: The use of planimetric techniques can increase the power of plaque studies, potentially reducing the number of subjects and time required to separate therapies or products. Fluorescent methods of quantification have potential as they enable clear separation of the plaque covered and non-covered tooth surfaces.

The use of in situ models and QLF for the study of coronal caries.

OBJECTIVES: The purpose of the paper is to review aspects of the systems available to model the caries process in enamel. METHODS: The in situ model developed in Liverpool, and the new method of quantifying mineral loss, Quantitative Light-induced Fluorescence (QLF), are described. QLF is a powerful new diagnostic tool which can be used to measure demineralisation and remineralisation in tooth surfaces in vivo; studies to optimise, validate and use QLF in different clinical situations are described. RESULTS: Examples of the use of in situ models show that they are particularly valuable for monitoring de and remineralisation of artificial lesions in relation to product testing as alternatives to clinical trials, and present significant advances over in vitro methods. Quantification of mineral loss by Transverse Microradiography (TMR) as in the traditional Liverpool model has produced much valuable information, but the destructive nature of the method limits experimental design, and removes the system from the clinical situation. As a possible alternative, QLF has been validated and optimised. Longitudinal measures can be made on the same surface, and examples of its use are for monitoring recurrent caries and demineralisation around orthodontic brackets. CONCLUSIONS: While current in situ models provide a major advance over earlier caries models, measurement of de and remineralisation by destructive methods such as transverse microradiography limits the design of experimental investigations. QLF offers significant time saving, reduces the cost of clinical studies, and because the measurements can be carried out longitudinally in vivo, can remove the need for intra-oral appliances carrying experimental tissues.

Development of an in situ root caries model. A. In vitro investigations.

OBJECTIVES: The paper describes preliminary in vitro investigations, the objectives of which were to examine the influence of certain experimental parameters on artificial carious lesion formation in root hard tissues, and their remineralisation. These experiments formed part of a wider study that aimed to develop an in situ model of root caries, based on the existing coronal caries model used in Liverpool. The present studies examined the effects (a) of the anatomical origin of the dentine, the presence or absence of cementum, the exposure time and the type of demineralising system, on lesion development, and (b) of baseline lesion size on the extent and location of mineral re-precipitation. METHODS: Mineral content parameters in plano-parallel sections taken from dentine lesions were determined by computer-controlled transverse microradiography. RESULTS: The importance of the anatomical origin of the dentine on lesion formation was investigated by comparing in vitro lesion formation in premolar and molar dentine, and in dentine from apical, middle and coronal thirds of the root: no difference was observed between these sites. Lesions formed more rapidly in acid buffer solutions than in acid gel systems, and were more reliably produced when cementum was removed. The effect of baseline lesion size on subsequent in vitro remineralisation demonstrated that a small baseline mineral content was associated with a larger percentage mineral gain. The location of mineral deposition throughout the lesion was also influenced by baseline mineral content parameters. CONCLUSIONS: The results form a basis for the further development of an in situ dentinal caries model, providing data to suggest that manipulation of parameters involved in the preparation of artificial carious lesions has a significant effect on the behaviour of the lesion, particularly the phenomenon of remineralisation. Further work is needed to investigate the behaviour of the model in situ.

Development of an in situ root caries model B. In situ investigations.

OBJECTIVES: The aims of this pilot study were to assess the suitability of an in situ model for root caries studies, and to investigate the effect of sub-surface lesion mineral content and ultrastructural organisation on remineralisation. METHODS: Subjects were selected by criteria generally used for coronal caries models. Plaque pH responses and salivary flow rates were determined by standard methods. The chosen substrate was human dentine with artificially induced caries-like demineralisation and sterilised by gamma-irradiation (4100 Gy). Two levels of baseline demineralisation were induced by exposure to an acid buffer for 2 or 5 days. Mineral content was measured by computer-controlled quantitative microradiography. RESULTS: Remineralisation in situ was greater in smaller lesions with lower surface mineral content than in larger lesions in which the surface mineral content was high. CONCLUSIONS: The model is suitable for further development for investigating dentinal caries. More work is needed to validate the model by means of a fluoride dose-response study.