Properties of Poultry-Manure-Derived Biochar for Peat Substitution in Growing Media.

Peat is considered a contentious input in horticulture. Therefore, there is a search for suitable alternatives with similar properties that can be used for partial or complete peat substitution in growing media. Poultry-manure-derived biochar (PMB) is considered such an alternative. This study aimed at determining the properties of PMBs obtained through pyrolysis at selected temperatures and assessing their potentials to substitute peat in growing media based on the selected properties. The scope included the laboratory-scale pyrolysis of poultry manure at the temperatures of 425-725 °C; the determination of selected physico-chemical and physical properties of the obtained biochars, including the contaminants; and the assessment of the potentials of produced biochars to be used as peat substitutes. PMBs contained less than 36% of total organic carbon (TOC). The contents of P and K were about 2.03-3.91% and 2.74-5.13%, respectively. PMBs did not retain N. They can be safely used as the concentrations of heavy metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinatd biphenyls (PCBs), dioxins, and furans are within the permissible values (except for Cr). Due to high pH (9.24-12.35), they can have a liming effect. High water holding capacity (WHC) in the range of 158-232% w/w could allow for the maintenance of moisture in the growing media. PMBs obtained at 525 °C, 625 °C, and 725 °C showed required stability (H/Corg < 0.7).

The opoka-rock in N and P of poultry manure management according to circular economy.

European Green Deal (EGD) and the Circular Economy Action Plan (CE) promote recycling of materials in line with circular economy principles and enhance the value of material flows. Recently, new technologies have been introduced to produce value-added products from agricultural residues and food processing side streams. However integrated approach is necessary for organic waste utilization as environmentally safe product according to the bio-economy rules. The so-called opoka-rock is characterized as a transitional rock between carbonate (app. 71%) and those of a silica character (app. 26%). This study identifies research gaps on how circular bioeconomy can be achieved through application of opoka for improvement of sustainable nitrogen and phosphorous management of poultry manure as safe fertilizer according to CE. Initially, it was found that opoka was able to effectively absorb the N and P ions from water solution and then gradual release to environment. Thermal treatment (900 °C) increased rapidly sorption capacity of opoka to 100% in the case of phosphorous, value of pH and content of Ca2+ions in eluates. Moreover, the volume ratio of opoka to poultry manure in experimental mixtures was optimized to determine of nitrogen and phosphorus release into the solution. The substrate was characterized by good desorption properties - the tests confirmed gradually release of N and P ions to solution with the maximum concentration obtained after 32 h equal almost 71% of initial value in mixtures in the case of phosphorous and almost 40% in the case of nitrogen. The novelty of such approach gives opportunity use opoka-rock not only as a single sorbent but also for improvement of poultry manure as mineral-organic fertilizers in the context of CE. This also allow to control for ions N, P release and maintain suitable pH value of soil environment.

Influence of Pyrolysis Temperature on the Heavy Metal Sorption Capacity of Biochar from Poultry Manure.

Sorption properties of various biochars have been extensively investigated by many researchers. One of the parameters that have a significant impact on sorption properties is pyrolysis temperature. This paper presents a study on the effect of pyrolysis temperature (425, 575, 725 °C) on the sorption properties of poultry-manure-derived biochar (BPM). The produced biochars, i.e., BPM425, BPM575 and BPM725, demonstrated specific properties at 425, 525 and 752 °C such as high pH (10.40, 10.65 and 12.45), high ash contents (52.07, 61.74 and 78.38%) and relatively low BET (Brunauer, Emmett and Teller) surface area (11, 17 and 19 m2·g-1). The analysis of the mineral phases of the BPMs confirmed the buffering capacity. The investigated biochars were tested for sorption of Zn, Cd and Pb in mono-, double- and triple-metal batch sorption tests. According to the obtained results, biochar produced at a temperature of 575 °C (BPM575) can function as a sufficient sorbent for the removal of Zn, Cd and Pb from a water solution. The presented results do not confirm the effect of competing metal ions on the sorption efficiency of the selected metals by the investigated biochars. Based on that, the studied biochar sorbents can be used in environments contaminated with many metals.

Effect of addition of sewage sludge and coal sludge on bioavailability of selected metals in the waste from the zinc and lead industry.

This study evaluated the content of bioavailable forms of selected heavy metals present in the waste from Zn and Pb processing that can potentially have an effect on the observed difficulties in reclamation of landfills with this waste. The particular focus of the study was on iron because its potential excess or deficiency may be one of the causes of the failure in biological reclamation. The study confirmed that despite high content of total iron in waste (mean value of 200.975gkg-1), this metal is present in the forms not available to plants (mean: 0.00009gkg-1). The study attempted to increase its potential bioavailability through preparation of the mixtures of this waste with additions in the form of sewage sludge and coal sludge in different proportions. Combination of waste with 10% of coal sludge and sewage sludge using the contents of 10%, 20% and 30% increased the amounts of bioavailable iron forms to the level defined as sufficient for adequate plant growth. The Lepidum sativum test was used to evaluate phytotoxicity of waste and the mixtures prepared based on this waste. The results did not show unambiguously that the presence of heavy metals in the waste had a negative effect on the growth of test plant roots.

Vitrification as an alternative to landfilling of tannery sewage sludge.

Due to high content of heavy metals such as chromium, tannery sewage sludge is a material which is difficult to be biologically treated as it is in the case of organic waste. Consequently, a common practice in managing tannery sewage sludge is landfilling. This poses a potential threat to both soil and water environments and it additionally generates costs of construction of landfills that meet specific environment protection requirements. Vitrification of this kind of sewage sludge with the addition of mineral wastes can represent an alternative to landfilling. The aim of this study was to investigate the possibility of obtaining an environmentally safe product by means of vitrification of tannery sewage sludge from a flotation wastewater treatment process and chemical precipitation in order to address the upcoming issue of dealing with sewage sludge from the tannery industry which will be prohibited to be landfilled in Poland after 2016. The focus was set on determining mixtures of tannery sewage sludge with additives which would result in the lowest possible heavy metal leaching levels and highest hardness rating of the products obtained from their vitrification. The plasma vitrification process was carried out for mixtures with various amounts of additives depending on the type of sewage sludge used. Only the materials of waste character were used as additives. One finding of the study was an optimum content of mineral additives in vitrified mixture of 30% v/v waste molding sands with 20% v/v carbonate flotation waste from the zinc and lead industry for the formulations with flotation sewage sludge, and 45% v/v and 5% v/v, respectively, for precipitation sewage sludge. These combinations allowed for obtaining products with negligible heavy metal leaching levels and hardness similar to commercial glass, which suggests they could be potentially used as construction aggregate substitutes. Incineration of sewage sludge before the vitrification process lead to increased hardness of the vitrificates and reduced leaching of some heavy metals.