ABSTRACT
Surface modification of textile fabrics and leathers is very versatile and allows the products quality improvement. In this work, cotton and leather substrates were pre-treated with cold atmospheric pressure plasma (CAPP) and further coated with TiO2-SiO2-reduced graphene oxide composites in dispersion form. By using a Taguchi scheme, this research evaluated the effect of three significant parameters, i.e., the pre-treatment with CAPP, organic dispersion coating and TiO2-SiO2-reduced graphene oxide (TS/GR) composites, that may affect the morpho-structural properties and photocatalytic activity of modified cotton and leather surfaces. The characteristics of cotton/leather surfaces were evaluated by morphological, structural, optical and self-cleaning ability using scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX), X-ray powder diffraction (XRD), attenuated total reflection-Fourier Transform Infrared spectroscopy (ATR-FTIR) and UV-Vis spectroscopy. The self-cleaning performance of the obtained cotton and leather samples was evaluated by photocatalytic discoloration of berry juice surface stains under UV light irradiation for 12 h. The successfulness of coating formulations was proven by the SEM analysis and UV-Vis spectroscopy. The XRD patterns and ATR-FTIR spectra revealed the cellulose and collagen structures as dominant components of cotton and leather substrates. The CAPP treatment did not damage the cotton and leather structures. The photocatalytic results highlighted the potential of TiO2-SiO2-reduced graphene oxide composites in organic dispersion media, as coating formulations, for further use in the fabrication of innovative self-cleaning photocatalytic cotton and leather products.
ABSTRACT
Easy and cost-efficient modifications of titanium dioxide nanoparticles that improve their efficiency in the visible light domain represent a continuous and challenging research topic. In addition, the effect of graphene on the overall photocatalytic process is still debated. Consequently, herein, we prepared a series of TiO2 nanoparticle-based composites with different copper oxide mass content (1-3%) and co-doped with graphene of different oxidation degrees. Different characterization techniques were used to analyze the structural and physico-chemical properties of the obtained composites: Scanning Electron Microscopy (SEM)/Transmission Electron Microscopy (TEM)/Energy-dispersive X-ray spectroscopy (EDX) analysis, X-ray powder diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic performance was evaluated by the degradation of methylene blue under both UVA and visible light irradiation. The nanocomposites show very good photocatalytic activity independent of the presence of reduced graphene oxide, due to the Cu2O/CuO-TiO2 heterojunctions. This finding has been confirmed by the very efficient visible-light-driven degradation of amoxicillin and ciprofloxacin.
Subject(s)
Graphite , Nanoparticles , Amoxicillin , Catalysis , Ciprofloxacin , Copper , Graphite/chemistry , Light , Methylene Blue/chemistry , Oxides/chemistry , Spectroscopy, Fourier Transform Infrared , Titanium/chemistryABSTRACT
In this paper, the photodynamic effect of a ternary nanocomposite (TiO2-Ag/graphene) on Escherichia coli bacteria and two human cell lines: A375 (melanoma) and HaCaT (keratinocyte) after exposure to different wavelength domains (blue, green or red-Light Emitting Diode, LED) was analyzed. The results obtained through bioassays were correlated with the morphological, structural and spectral data obtained through FT-IR, XPS and UV-Vis spectroscopy, powder X-Ray diffractometry (XRD) and STEM/EDX techniques, leading to conclusions that showed different photodynamic activation mechanisms and effects on bacteria and human cells, depending on the wavelength. The nanocomposite proved a therapeutic potential for blue light-activated antibacterial treatment and revealed a keratinocyte cytotoxic effect under blue and green LEDs. The red light-nanocomposite duo gave a metabolic boost to normal keratinocytes and induced stasis to melanoma cells. The light and nanocomposite combination could be a potential therapy for bacterial keratosis or for skin tumors.
Subject(s)
Escherichia coli/radiation effects , Graphite/chemistry , Light , Nanocomposites/toxicity , Cell Survival/drug effects , Cell Survival/radiation effects , Disk Diffusion Antimicrobial Tests , Humans , Keratinocytes/cytology , Keratinocytes/metabolism , Keratinocytes/pathology , Keratinocytes/radiation effects , Keratosis/drug therapy , Keratosis/pathology , Nanocomposites/chemistry , Nanocomposites/therapeutic use , Silver/chemistry , Titanium/chemistryABSTRACT
Graphene/AgNPs-based surface dynamics of native DNA functional groups at different acidic pH values was discussed using surface-enhanced Raman spectroscopy (SERS). Also, ab initio dynamics of Verlet type was investigated for nucleic acid nitrogenous bases adsorbed on a graphene surface, respectively. The experimental dynamical parameters were given in terms of full widths at half-maximum (FWHMs) and (sub)picosecond global relaxation times, associated with SERS bands. Furthermore, using density functional theory (DFT) as implemented in SIESTA and the velocity autocorrelation function (VACF), we have obtained the vibrational density of states (VDOS) for each of the four DNA bases placed on a pristine graphene layer. Graphical abstract Top: computed VbDOS for guanine. Bottom: Verlet temperature as a function of time.
Subject(s)
DNA/chemistry , Graphite/chemistry , Hydrogen-Ion Concentration , Metal Nanoparticles/chemistry , Molecular Dynamics Simulation , Nucleic Acid Conformation , Silver/chemistry , Algorithms , DNA, Plant , Models, Theoretical , Spectrum Analysis, RamanABSTRACT
The release of synthetic food dyes, like Sunset yellow, into industrial effluents can cause serious environmental and health problems. Due to its aromatic structure, it is recalcitrant towards degradation into non-toxic intermediates and its removal by efficient adsorption represents a cheap and efficient method. Herein we propose the use of thermally reduced graphene oxide (TRGO) as effective Sunset yellow dye adsorbent with an adsorption maximum capacity comparable with other sophisticated, chemically synthesized carbon-based nanomaterials. The reduced graphene oxide and the Sunset yellow adsorbed one were characterized by FT-IR, XPS and XRD spectroscopy, N2 adsorption-desorption isotherm and TGA analysis. BET surface area reduced from 274.1 m2/g (for TRGO) to 39.9 m2/g (for TRGO-SY) showing that Sunset Yellow molecules occupied the corresponding active sites while the number of sheets resulted from the XRD spectra - from 3 to 8 in TRGO to 5 in TRGO-SY indicates the ordered intercalations in the graphene structure. The adsorption isotherm experimental data were better fitted with the Langmuir model than the Freundlich model, with the maximum adsorption capacity of the SY dye monolayer of 243.3 mg/g at pH = 6.0 and 189.0 mg/g from synthetic wastewater. The kinetic study revealed a perfect fit following the Pseudo-second order model with an equilibrium achieved within 30 min. The lack of adsorption on the starting graphene oxide is indicative for π-π interactions between the adsorbate and adsorbent.
Subject(s)
Azo Compounds , Decontamination , Graphite , Adsorption , Hydrogen-Ion Concentration , Kinetics , Spectroscopy, Fourier Transform InfraredABSTRACT
Graphene nanosheets (EGr) were electrochemically prepared through one-step exfoliation of a graphite rod in a mixture of H2SO4:HNO3 (3:1) at low bias (4 V). Subsequently, gold nanoparticles were attached to the graphene surface (EGr-Au) by the reduction of the metal precursor (HAuCl4) in aqueous solution containing dispersed graphene sheets. According to the XRD investigation, the synthesized material consists of a mixture of few-layer (86%) and multi-layer (14%) graphene. The interlayer distance was found to be in the range of 0.466-0.342 nm, which is larger than the interlayer distance in graphite (0.335 nm). The average size of gold nanoparticles in the EGr-Au sample was 24 nm, in excellent agreement with the TEM results. The synthesized material was then employed to modify a glassy carbon (GC) substrate, in order to obtain a modified electrode (GC/EGr-Au). Next, the electrochemical behavior of hydroquinone (HQ) in the presence and absence of interfering species, catechol (CAT) and bisphenol A (BPA) was studied and the corresponding calibration curves were plotted. Thus, in solutions without interfering species, the GC/EGr-Au electrode has a wide linear range (3 × 10-7-10-4 M), high sensitivity (0.089 A M-1) and low detection limit (LOD = 10-7 M; S/N = 3). The presence of either catechol or bisphenol A leads to the increase of LOD to 2 × 10-7 M, and in addition changes the electrode sensitivity, up to 0.146 A M-1.
ABSTRACT
A novel nanocomposite was developed and used for trace determination of Pb2+ cations from aqueous solutions. The nanocomposite was obtained by the association of N-doped graphene (N-Gr) with a biocompatible polymer, namely chitosan (Ch). The characterization of the new nanocomposite material (Ch-N-Gr) was performed using TEM, STEM-EDX, SEM, XRD and XPS techniques. Compared with the bare gold electrode (GE) a remarkable enhancement of the voltammetric response of the modified electrode (Ch-N-Gr/GE) was always observed. Using the Ch-N-Gr/GE, the Pb2+ voltammetric response showed a pair of well defined, quasi-reversible anodic and cathodic peaks, with the peak potentials located at about -0.59 V and -0.69 V, respectively. The calibration curves were obtained over a large linear range, from 10-7 to 10-4 M Pb2+ concentration. Under optimized conditions, the detection limit was found to be 6.64 × 10-8 M. The effect of several interfering species (such as other metallic cations or organic compounds of various concentrations) on the determination of Pb2+ concentration was also studied, and the results proved the selectivity of the proposed modified electrode. The validity and effectiveness of the method was further confirmed by trace determination of Pb2+ in real samples.
ABSTRACT
This study brings for the first time novel knowledge about the synthesis by catalytic chemical vapor deposition with induction heating of graphene-bimetallic nanoparticle composites (Gr-AuCu and Gr-AgCu) and their morphological and structural characterization by transmission electron microscopy, Raman spectroscopy, and x-ray powder diffraction. Gold electrodes modified with the obtained materials exhibit an enhanced electro-catalytic effect towards one of the most encountered estrogenic disruptive chemicals, bisphenol A (BPA). The BPA behavior in varying pH solutions was investigated using the electrochemical quartz crystal microbalance, which allowed the accurate determination of the number of molecules involved in the oxidation process. The modified electrodes promote the oxidation of BPA at significantly lower potentials (0.66 V) compared to bare gold (0.78 V). In addition, the peak current density recorded with such electrodes greatly exceeded that obtained with bare gold (e.g. one order of magnitude larger, for a Au/Gr-AgCu electrode). The two modified electrodes have low detection limits, of 1.31 × 10-6 M and 1.91 × 10-6 M for Au/Gr-AgCu and Au/Gr-AuCu, respectively. The bare gold electrode has a higher detection limit of 5.1 × 10-6 M. The effect of interfering species (e.g. catechol and 3-nitrophenol) was also investigated. Their presence influenced not only the BPA peak potential, but also the peak current. With both modified electrodes, no peak currents were recorded below 3 × 10-5 M BPA.
ABSTRACT
Graphene-oxide (GO) and its most encountered derivatives, thermally reduced graphene oxide (TRGO) and nitrogen-doped graphene (N-Gr), were synthesized and structurally characterized by spectroscopic techniques, like Raman and (13)C MAS solid state NMR. Several biological effects (cytotoxicity, oxidative stress induction, and cellular and mithocondrial membrane alterations) induced by such graphene-based materials on human dental follicle stem cells were investigated. Graphene oxide shows the lowest cytotoxic effect, followed by the nitrogen-doped graphene, while thermally reduced graphene oxide exhibits high cytotoxic effects. Graphene oxide induces oxidative stress without causing cell membrane damage. Nitrogen-doped graphene shows a slight antioxidant activity; however, at high doses (20 and 40 µg/ml) it causes membrane damage. Both graphene oxide and nitrogen-doped graphene seem to be valuable candidates for usage in dental nanocomposites.