Stabilization of Lattice Oxygen Evolution Reactions in Oxophilic Ce-Mediated Bi/BiCeO1.8H Electrocatalysts for Efficient Anion Exchange Membrane Water Electrolyzers.

The lattice oxygen mechanism (LOM) offers an efficient reaction pathway for oxygen evolution reactions (OERs) in energy storage and conversion systems. Owing to the involvement of active lattice oxygen enhancing electrochemical activity, addressing the structural and electrochemical stabilities of LOM materials is crucial. Herein, a heterostructure (Bi/BiCeO1.8H) containing abundant under-coordinated oxygen atoms having oxygen nonbonding states is synthesized by a simple electrochemical deposition method. Given the difference in reduction potentials between Bi and Ce, partially reduced Bi nanoparticles and surrounding under-coordinated oxygen atoms are generated in BiCeO1.8H. It is found that the lattice oxygen can be activated as a reactant of the OER when the valence state of Bi increases to Bi5+, leading to increased metal-oxygen covalency and that the oxophilic Ce3+/4+ redox couple can maintain the Bi nanoparticles and surrounding under-coordinated oxygen atoms by preventing over-oxidation of Bi. The anion exchange membrane water electrolyzer with Bi/BiCeO1.8H exhibits a low cell voltage of 1.79 V even at a high practical current density of 1.0 A cm-2. Furthermore, the cell performance remains significantly stable over 100 h with only a 2.2% increase in the initial cell voltage, demonstrating sustainable lattice oxygen redox.

Hierarchically Interconnected 3D Catalyst Structure of Porous Multi-Metal Oxide Nanofibers for High-Performance Li-O2 Batteries.

Non-aqueous lithium-oxygen batteries (LOBs) have emerged as a promising candidate due to their high theoretical energy density and eco-friendly cathode reaction materials. However, LOBs still suffer from high overpotential and poor cycling stability resulting from difficulties in the decomposition of discharge reaction Li2 O2 products. Here, a 3D open network catalyst structure is proposed based on highly-thin and porous multi-metal oxide nanofibers (MMONFs) developed by a facile electrospinning approach coupled with a heat treatment process. The developed hierarchically interconnected 3D porous MMONFs catalyst structure with high specific surface area and porosity shows the enhanced electrochemical reaction kinetics associated with Li2 O2 formation and decomposition on the cathode surface during the charge and discharge processes. The uniquely assembled cathode materials with MMONFs exhibit excellent electrochemical performance with energy efficiency of 82% at a current density of 50 mA g-1 and a long-term cycling stability over 100 cycles at 200 mA g-1 with a cut-off capacity of 500 mAh g-1 . Moreover, the optimized cathode materials exhibit a remarkable energy density of 1013 Wh kg-1 at the 100th discharge and charge cycle, which is nearly four times higher than that of C/NMC721, which has the highest energy density among the cathode materials currently used in electric vehicles.

Truly form-factor-free industrially scalable system integration for electronic textile architectures with multifunctional fiber devices.

An integrated textile electronic system is reported here, enabling a truly free form factor system via textile manufacturing integration of fiber-based electronic components. Intelligent and smart systems require freedom of form factor, unrestricted design, and unlimited scale. Initial attempts to develop conductive fibers and textile electronics failed to achieve reliable integration and performance required for industrial-scale manufacturing of technical textiles by standard weaving technologies. Here, we present a textile electronic system with functional one-dimensional devices, including fiber photodetectors (as an input device), fiber supercapacitors (as an energy storage device), fiber field-effect transistors (as an electronic driving device), and fiber quantum dot light-emitting diodes (as an output device). As a proof of concept applicable to smart homes, a textile electronic system composed of multiple functional fiber components is demonstrated, enabling luminance modulation and letter indication depending on sunlight intensity.

2D Nanostructures for Optoelectronic and Green Energy Devices.

Two-dimensional (2D) materials and nanostructures have gathered significant attention due to their excellent mechanical properties [...].

Evolution of Local Structural Motifs in Colloidal Quantum Dot Semiconductor Nanocrystals Leading to Nanofaceting.

Colloidal nanocrystals (NCs) have shown remarkable promise for optoelectronics, energy harvesting, photonics, and biomedical imaging. In addition to optimizing quantum confinement, the current challenge is to obtain a better understanding of the critical processing steps and their influence on the evolution of structural motifs. Computational simulations and electron microscopy presented in this work show that nanofaceting can occur during nanocrystal synthesis from a Pb-poor environment in a polar solvent. This could explain the curved interfaces and the olivelike-shaped NCs observed experimentally when these conditions are employed. Furthermore, the wettability of the PbS NCs solid film can be further modified via stoichiometry control, which impacts the interface band bending and, therefore, processes such as multiple junction deposition and interparticle epitaxial growth. Our results suggest that nanofaceting in NCs can become an inherent advantage when used to modulate band structures beyond what is traditionally possible in bulk crystals.

Mechanochemically interlocked cubane copper complex interface for WOLED.

In the rapid development of organic light-emitting diodes (OLEDs), phosphorescent transition metal complexes have played a crucial role as the most promising candidates for next generation display and lighting applications. However, most devices are fabricated using iridium and platinum-based complexes which are expensive and available in very limited quantities, whereas using relatively abundant organometallic complexes for fabrication results mostly in inefficient performance results. To overcome these issues, we have synthesized tetra copper iodide with tetra triphenyl cage like structure (denoted as CIPh) as an emerging class of luminescent material by mechanochemical grinding followed by thermal treatment for application in white OLED. The CIPh complex exhibits considerable quantum yield and a millisecond decay lifetime. Phosphorescent OLEDs were fabricated using CIPh complex as emitter shows a remarkable performance with external quantum efficiency and current efficiency of 5.28 % and 22.76 cd/A, with a high brightness of 4200 cd m-2, respectively. White OLEDs were also fabricated with a fluorescent blue and phosphorescent red emitted with (CIPh) as green emitter and achieved an impressive CRI of 82 with an EQE of over 3 %. This is the first ever attempt at fabricating WOLEDs using organocopper complex.

Observation of Strong Interlayer Couplings in WS2/MoS2 Heterostructures via Low-Frequency Raman Spectroscopy.

Van der Waals (vdW) heterostructures based on two-dimensional (2D) transition metal dichalcogenides (TMDCs), particularly WS2/MoS2 heterostructures with type-II band alignments, are considered as ideal candidates for future functional optoelectronic applications owing to their efficient exciton dissociation and fast charge transfers. These physical properties of vdW heterostructures are mainly influenced by the interlayer coupling occurring at the interface. However, a comprehensive understanding of the interlayer coupling in vdW heterostructures is still lacking. Here, we present a detailed analysis of the low-frequency (LF) Raman modes, which are sensitive to interlayer coupling, in bilayers of MoS2, WS2, and WS2/MoS2 heterostructures directly grown using chemical vapor deposition to avoid undesirable interfacial contamination and stacking mismatch effects between the monolayers. We clearly observe two distinguishable LF Raman modes, the interlayer in-plane shear and out-of-plane layer-breathing modes, which are dependent on the twisting angles and interface quality between the monolayers, in all the 2D bilayered structures, including the vdW heterostructure. In contrast, LF modes are not observed in the MoS2 and WS2 monolayers. These results indicate that our directly grown 2D bilayered TMDCs with a favorable stacking configuration and high-quality interface can induce strong interlayer couplings, leading to LF Raman modes.

Unravelling the Nature of the Intrinsic Complex Structure of Binary-Phase Na-Layered Oxides.

The layered sodium transition metal oxide, NaTMO2 (TM = transition metal), with a binary or ternary phases has displayed outstanding electrochemical performance as a new class of strategy cathode materials for sodium-ion batteries (SIBs). Herein, an in-depth phase analysis of developed Na1-x TMO2 cathode materials, Na0.76 Ni0.20 Fe0.40 Mn0.40 O2 with P2- and O3-type phases (NFMO-P2/O3) is offered. Structural visualization on an atomic scale is also provided and the following findings are unveiled: i) the existence of a mixed-phase intergrowth layer distribution and unequal distribution of P2 and O3 phases along two different crystal plane indices and ii) a complete reversible charge/discharge process for the initial two cycles that displays a simple phase transformation, which is unprecedented. Moreover, first-principles calculations support the evidence of the formation of a binary NFMO-P2/O3 compound, over the proposed hypothetical monophasic structures (O3, P3, O'3, and P2 phases). As a result, the synergetic effect of the simultaneous existence of P- and O-type phases with their unique structures allows an extraordinary level of capacity retention in a wide range of voltage (1.5-4.5 V). It is believed that the insightful understanding of the proposed materials can introduce new perspectives for the development of high-voltage cathode materials for SIBs.

Smart textile lighting/display system with multifunctional fibre devices for large scale smart home and IoT applications.

Smart textiles consist of discrete devices fabricated from-or incorporated onto-fibres. Despite the tremendous progress in smart textiles for lighting/display applications, a large scale approach for a smart display system with integrated multifunctional devices in traditional textile platforms has yet to be demonstrated. Here we report the realisation of a fully operational 46-inch smart textile lighting/display system consisting of RGB fibrous LEDs coupled with multifunctional fibre devices that are capable of wireless power transmission, touch sensing, photodetection, environmental/biosignal monitoring, and energy storage. The smart textile display system exhibits full freedom of form factors, including flexibility, bendability, and rollability as a vivid RGB lighting/grey-level-controlled full colour display apparatus with embedded fibre devices that are configured to provide external stimuli detection. Our systematic design and integration strategies are transformational and provide the foundation for realising highly functional smart lighting/display textiles over large area for revolutionary applications on smart homes and internet of things (IoT).

Hierarchically Assembled Plasmonic Metal-Dielectric-Metal Hybrid Nano-Architectures for High-Sensitivity SERS Detection.

In this work, we designed and prepared a hierarchically assembled 3D plasmonic metal-dielectric-metal (PMDM) hybrid nano-architecture for high-performance surface-enhanced Raman scattering (SERS) sensing. The fabrication of the PMDM hybrid nanostructure was achieved by the thermal evaporation of Au film followed by thermal dewetting and the atomic layer deposition (ALD) of the Al2O3 dielectric layer, which is crucial for creating numerous nanogaps between the core Au and the out-layered Au nanoparticles (NPs). The PMDM hybrid nanostructures exhibited strong SERS signals originating from highly enhanced electromagnetic (EM) hot spots at the 3 nm Al2O3 layer serving as the nanogap spacer, as confirmed by the finite-difference time-domain (FDTD) simulation. The PMDM SERS substrate achieved an outstanding SERS performance, including a high sensitivity (enhancement factor, EF of 1.3 × 108 and low detection limit 10-11 M) and excellent reproducibility (relative standard deviation (RSD) < 7.5%) for rhodamine 6G (R6G). This study opens a promising route for constructing multilayered plasmonic structures with abundant EM hotspots for the highly sensitive, rapid, and reproducible detection of biomolecules.

Pre-Anodized Graphite Pencil Electrode Coated with a Poly(Thionine) Film for Simultaneous Sensing of 3-Nitrophenol and 4-Nitrophenol in Environmental Water Samples.

A very simple, as well as sensitive and selective, sensing protocol was developed on a pre-anodized graphite pencil electrode surface coated using poly(thionine) (APGE/PTH). The poly(thionine) coated graphite pencil was then used for simultaneous sensing of 3-nitrophenol (3-NP) and 4-nitrophenol (4-NP). The poly(thionine) coated electrode exhibited an enhanced electrocatalytic property towards nitrophenol (3-NP and 4-NP) reduction. Redox peak potential and current of both nitrophenols were found well resolved and their simultaneous analysis was studied. Under optimized experimental conditions, APGE/PTH showed a long linear concentration range from 20 to 230 nM and 15 nM to 280 nM with a calculated limit of detection (LOD) of 4.5 and 4 nM and a sensitivity of 22.45 µA/nM and 27.12 µA/nM for 3-NP and 4-NP, respectively. Real sample analysis using the prepared sensor was tested with different environmental water samples and the sensors exhibited excellent recovery results in the range from 98.16 to 103.43%. Finally, the sensor exposed an promising selectivity, stability, and reproducibility towards sensing of 3-NP and 4-NP.

Plasmonic Core-Shell-Satellites with Abundant Electromagnetic Hotspots for Highly Sensitive and Reproducible SERS Detection.

In this work, we develop a Ag@Al2O3@Ag plasmonic core-shell-satellite (PCSS) to achieve highly sensitive and reproducible surface-enhanced Raman spectroscopy (SERS) detection of probe molecules. To fabricate PCSS nanostructures, we employ a simple hierarchical dewetting process of Ag films coupled with an atomic layer deposition (ALD) method for the Al2O3 shell. Compared to bare Ag nanoparticles, several advantages of fabricating PCSS nanostructures are discovered, including high surface roughness, high density of nanogaps between Ag core and Ag satellites, and nanogaps between adjacent Ag satellites. Finite-difference time-domain (FDTD) simulations of the PCSS nanostructure confirm an enhancement in the electromagnetic field intensity (hotspots) in the nanogap between the Ag core and the satellite generated by the Al2O3 shell, due to the strong core-satellite plasmonic coupling. The as-prepared PCSS-based SERS substrate demonstrates an enhancement factor (EF) of 1.7 × 107 and relative standard deviation (RSD) of ~7%, endowing our SERS platform with highly sensitive and reproducible detection of R6G molecules. We think that this method provides a simple approach for the fabrication of PCSS by a solid-state technique and a basis for developing a highly SERS-active substrate for practical applications.

Room Temperature Wafer-Scale Synthesis of Highly Transparent, Conductive CuS Nanosheet Films via a Simple Sulfur Adsorption-Corrosion Method.

The development of highly conductive electrodes with robust mechanical durability and clear transmittance in the visible to IR spectral range is of great importance for future wearable/flexible electronic applications. In particular, low resistivity, robust flexibility, and wide spectral transparency have a significant impact on optoelectronic performance. Herein, we introduce a new class of covellite copper monosulfide (CuS) nanosheet films as a promising candidate for soft transparent conductive electrodes (TCEs). An atmospheric sulfur adsorption-corrosion phenomenon represents a key approach in our work for the achievement of wafer-scale CuS nanosheet films through systematic control of the neat Cu layer thickness ranging from 2 to 10 nm multilayers at room temperature. These nanosheet films provide outstanding conductivity (∼25 Ω sq-1) and high transparency (> 80%) in the visible to infrared region as well as distinct flexibility and long stability under air exposure, yielding a high figure-of-merit (∼60) that is comparable to that of conventional rigid metal oxide material-based TCEs. Our unique room temperature synthesis process delivers high quality CuS nanosheets on any arbitrary substrates in a short time (< 1 min) scale, thus guaranteeing the widespread use of highly producible and scalable device fabrication.

Phase Transition-Induced Temperature-Dependent Phonon Shifts in Molybdenum Disulfide Monolayers Interfaced with a Vanadium Dioxide Film.

We report the optical phonon shifts induced by phase transition effects of vanadium dioxide (VO2) in monolayer molybdenum disulfide (MoS2) when interfacing with a VO2 film showing a metal-insulator transition coupled with structural phase transition (SPT). To this end, the monolayer MoS2 directly synthesized on a SiO2/Si substrate by chemical vapor deposition was first transferred onto a VO2/c-Al2O3 substrate in which the VO2 film was prepared by a sputtering method. We compared the MoS2 interfaced with the VO2 film with the as-synthesized MoS2 by using Raman spectroscopy. The temperature-dependent Raman scattering characteristics exhibited the distinct phonon behaviors of the E2g1 and A1g modes in the monolayer MoS2. Specifically, for the as-synthesized MoS2, there were no Raman shifts for each mode, but the enhancement in the Raman intensities of E2g1 and A1g modes was clearly observed with increasing temperature, which could be interpreted by the significant contribution of the interface optical interference effect. In contrast, the red-shifts of both the E2g1 and A1g modes for the MoS2 transferred onto VO2 were clearly observed across the phase transition of VO2, which could be explained in terms of the in-plane tensile strain effect induced by the SPT and the enhancement of electron-phonon interactions due to an increased electron density at the MoS2/VO2 interface through the electronic phase transition. This study provides further insights into the influence of interfacial hybridization for the heterogeneous integration of 2D transition-metal dichalcogenides and strongly correlated materials.

Effects of Applied Voltages on the Charge Transport Properties in a ZnO Nanowire Field Effect Transistor.

We investigate the effect of applied gate and drain voltages on the charge transport properties in a zinc oxide (ZnO) nanowire field effect transistor (FET) through temperature- and voltage-dependent measurements. Since the FET based on nanowires is one of the fundamental building blocks in potential nanoelectronic applications, it is important to understand the transport properties relevant to the variation in electrically applied parameters for devices based on nanowires with a large surface-to-volume ratio. In this work, the threshold voltage shift due to a drain-induced barrier-lowering (DIBL) effect was observed using a Y-function method. From temperature-dependent current-voltage (I-V) analyses of the fabricated ZnO nanowire FET, it is found that space charge-limited conduction (SCLC) mechanism is dominant at low temperatures and low voltages; in particular, variable-range hopping dominates the conduction in the temperature regime from 4 to 100 K, whereas in the high-temperature regime (150-300 K), the thermal activation transport is dominant, diminishing the SCLC effect. These results are discussed and explained in terms of the exponential distribution and applied voltage-induced variation in the charge trap states at the band edge.

Direct Epitaxial Synthesis of Selective Two-Dimensional Lateral Heterostructures.

Two-dimensional (2D) heterostructured or alloyed monolayers composed of transition metal dichalcogenides (TMDCs) have recently emerged as promising materials with great potential for atomically thin electronic applications. However, fabrication of such artificial TMDC heterostructures with a sharp interface and a large crystal size still remains a challenge because of the difficulty in controlling various growth parameters simultaneously during the growth process. Here, a facile synthetic protocol designed for the production of the lateral TMDC heterostructured and alloyed monolayers is presented. A chemical vapor deposition approach combined with solution-processed precursor deposition makes it possible to accurately control the sequential introduction time and the supersaturation levels of the vaporized precursors and thus reliably and exclusively produces selective and heterogeneous epitaxial growth of TMDC monolayer crystals. In addition, TMDC core/shell heterostructured (MoS2/alloy, alloy/WS2) or alloyed (Mo1-xWxS2) monolayers are also easily obtained with precisely controlled growth parameters, such as sulfur introduction timing and growth temperature. These results represent a significant step toward the development of various 2D materials with interesting properties.

Electronic Skin to Feel "Pain": Detecting "Prick" and "Hot" Pain Sensations.

An artificial tactile system has attracted tremendous interest and intensive study, since it can be applied as a new functional interface between humans and electronic devices. Unfortunately, most previous works focused on improving the sensitivity of sensors. However, humans also respond to psychological feelings for sensations such as pain, softness, or roughness, which are important factors for interacting with others and objects. Here, we present an electronic skin concept that generates a "pain" warning signal, specifically, to sharp "prick" and "hot" sensations. To simplify the sensor structure for these two feelings, a single-body tactile sensor design is proposed. By exploiting "hot" feeling based on the Seebeck effect instead of the pyroelectric property, it is possible to distinguish points registering a "hot" feeling from those generating a "prick" feeling, which is based on the piezoelectric effect. The control of free carrier concentration in nanowire induced the appropriate level of Seebeck current, which enabled the sensor system to be more reliable. The first derivatives of the piezo and Seebeck output signals are the key factors for the signal processing of the "pain" feeling. The main idea can be applied to mimic other psychological tactile feelings.

Author Correction: Resonantly hybridized excitons in moiré superlattices in van der Waals heterostructures.

An Amendment to this paper has been published and can be accessed via a link at the top of the paper.

Resonantly hybridized excitons in moiré superlattices in van der Waals heterostructures.

Atomically thin layers of two-dimensional materials can be assembled in vertical stacks that are held together by relatively weak van der Waals forces, enabling coupling between monolayer crystals with incommensurate lattices and arbitrary mutual rotation1,2. Consequently, an overarching periodicity emerges in the local atomic registry of the constituent crystal structures, which is known as a moiré superlattice3. In graphene/hexagonal boron nitride structures4, the presence of a moiré superlattice can lead to the observation of electronic minibands5-7, whereas in twisted graphene bilayers its effects are enhanced by interlayer resonant conditions, resulting in a superconductor-insulator transition at magic twist angles8. Here, using semiconducting heterostructures assembled from incommensurate molybdenum diselenide (MoSe2) and tungsten disulfide (WS2) monolayers, we demonstrate that excitonic bands can hybridize, resulting in a resonant enhancement of moiré superlattice effects. MoSe2 and WS2 were chosen for the near-degeneracy of their conduction-band edges, in order to promote the hybridization of intra- and interlayer excitons. Hybridization manifests through a pronounced exciton energy shift as a periodic function of the interlayer rotation angle, which occurs as hybridized excitons are formed by holes that reside in MoSe2 binding to a twist-dependent superposition of electron states in the adjacent monolayers. For heterostructures in which the monolayer pairs are nearly aligned, resonant mixing of the electron states leads to pronounced effects of the geometrical moiré pattern of the heterostructure on the dispersion and optical spectra of the hybridized excitons. Our findings underpin strategies for band-structure engineering in semiconductor devices based on van der Waals heterostructures9.

Surface functionalization-induced photoresponse characteristics of monolayer MoS2 for fast flexible photodetectors.

Monolayered, semiconducting molybdenum disulfide (MoS2) is of considerable interest for its potential applications in next-generation flexible, wearable, and transparent photodetectors because it has outstanding physical properties coupled with unique atomically thin dimensions. However, there is still a lack of understanding in terms of the underlying mechanisms responsible for the photoresponse dynamics, which makes it difficult to identify the appropriate device design strategy for achieving a fast photoresponse time in MoS2 photodetectors. In this study, we investigate the importance of surface functionalization on controlling the charge carrier densities in a MoS2 monolayer and in turn the corresponding behavior of the photoresponse in relation to the position of the Fermi-level and the energy band structure. We find that the p-doping and n-doping, which is achieved through the surface functionalization of the MoS2 monolayer, leads to devices with different photoresponse behavior. Specifically, the MoS2 devices with surface functional groups contributing to p-doping exhibited a faster response time as well as higher sensitivity compared to that observed for the MoS2 devices with surface functional groups contributing to n-doping. We attribute this difference to the degree of bending in the energy bands at the metal-semiconductor junction as a result of shifting in the Fermi-level position, which influences the optoelectronic transport properties as well as the recombination dynamics leading to a low dark and thus high detectivity and fast decay time. Based upon these findings, we have also demonstrated the broad applicability of surface functionalization by fabricating a flexible MoS2 photodetector that shows an outstanding decay time of 0.7 s, which is the fastest response time observed in flexible MoS2 detectors ever reported.