Microbial dynamics, chemical profile, and bioactive potential of diverse Egyptian marine environments from archaeological wood to soda lake.

Halophilic archaea are a unique group of microorganisms that thrive in high-salt environments, exhibiting remarkable adaptations to survive extreme conditions. Archaeological wood and El-Hamra Lake serve as a substrate for a diverse range of microorganisms, including archaea, although the exact role of archaea in archaeological wood biodeterioration remains unclear. The morphological and chemical characterizations of archaeological wood were evaluated using FTIR, SEM, and EDX. The degradation of polysaccharides was identified in Fourier transform infrared analysis (FTIR). The degradation of wood was observed through scanning electron microscopy (SEM). The energy dispersive X-ray spectroscopy (EDX) revealed the inclusion of minerals, such as calcium, silicon, iron, and sulfur, into archaeological wood structure during burial and subsequent interaction with the surrounding environment. Archaea may also be associated with detected silica in archaeological wood since several organosilicon compounds have been found in the crude extracts of archaeal cells. Archaeal species were isolated from water and sediment samples from various sites in El-Hamra Lake and identified as Natronococcus sp. strain WNHS2, Natrialba hulunbeirensisstrain WNHS14, Natrialba chahannaoensis strain WNHS9, and Natronococcus occultus strain WNHS5. Additionally, three archaeal isolates were obtained from archaeological wood samples and identified as Natrialba chahannaoensisstrain W15, Natrialba chahannaoensisstrain W22, and Natrialba chahannaoensisstrain W24. These archaeal isolates exhibited haloalkaliphilic characteristics since they could thrive in environments with high salinity and alkalinity. Crude extracts of archaeal cells were analyzed for the organic compounds using gas chromatography-mass spectrometry (GC-MS). A total of 59 compounds were identified, including free saturated and unsaturated fatty acids, saturated fatty acid esters, ethyl and methyl esters of unsaturated fatty acids, glycerides, phthalic acid esters, organosiloxane, terpene, alkane, alcohol, ketone, aldehyde, ester, ether, and aromatic compounds. Several organic compounds exhibited promising biological activities. FTIR spectroscopy revealed the presence of various functional groups, such as hydroxyl, carboxylate, siloxane, trimethylsilyl, and long acyl chains in the archaeal extracts. Furthermore, the archaeal extracts exhibited antioxidant effects. This study demonstrates the potential of archaeal extracts as a valuable source of bioactive compounds with pharmaceutical and biomedical applications.

Improvement of Bacillus subtilis PI agarase production, hydrolysate scavenging capability assessment, and saccharification of algal biomass for green ethanol generation.

The goal of the current work was to optimize the growth parameters needed to manufacture agarase enzyme from a non-marine PI strain of Bacillus subtilis on an agar-based medium. Using Plackett-Burman design (PBD), nine process parameters were evaluated, and agar, peptone, and yeast-extract were identified as the most significant independent factors influencing agarase production with confidence levels more than 90%. To evaluate the optimal concentrations of the indicated process parameters on agarase production, the Box-Behnken design (BBD) was applied. After optimization, B. subtilis strain PI produced 119.8 U/ml of agarase, representing a 1.36-fold increase. In addition the agar hydrolysate fermented products contain the liberated oligosaccharide acts as strong antioxidant which has 62.4% scavenging activity. Also, the agarase yields increased (1141.12, 1350.253, 1684.854 and 1921.863 U/ml) after substitution the agar with algal biomass of Carolina officinalis at different concentrations (2, 5, 10 and 15%), respectively. After completing the saccharification process, the resulted hydrolysate was used to produce ethanol through fermentation with Pichia pastoris yeast strain as an economical method giving yields (6.68317, 7.09748, 7.75648 and 8.22332 mg/ml), that are higher than using yeast extract peptone dextrose (YPD) medium (4.461 mg/ml).

A comparative study of the biosynthesis of CuNPs by Niallia circulans G9 and Paenibacillus sp. S4c strains: characterization and application as antimicrobial agents.

BACKGROUND: Biosynthesis of metallic nanoparticles using microorganisms are a fabulous and emerging eco-friendly science with well-defined sizes, shapes and controlled monodispersity. Copper nanoparticles, among other metal particles, have sparked increased attention due to their applications in electronics, optics, catalysis, and antimicrobial agents. RESULTS: This investigation explains the biosynthesis and characterization of copper nanoparticles from soil strains, Niallia circulans G9 and Paenibacillus sp. S4c by an eco-friendly method. The maximum reduction of copper ions and maximum synthesis CuNPs was provided by these strains. Biogenic formation of CuNPs have been characterized by UV-visible absorption spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray analysis and transmission electron microscopy analysis. Using UV-visible spectrum scanning, the synthesised CuNPs' SPR spectra showed maximum absorption peaks at λ304&308 nm. TEM investigation of the produced CuNPs revealed the development of spherical/hexagonal nanoparticles with a size range of 13-100 nm by the G9 strain and spherical nanoparticles with a size range of 5-40 nm by the S4c strain. Functional groups and chemical composition of CuONPs were also confirmed. The antimicrobial activity of the biosynthesized CuNPs were investigated against some human pathogens. CuNPs produced from the G9 strain had the highest activity against Candida albicans ATCC 10,231 and the lowest against Pseudomonas aeruginosa ATCC 9027. CuNPs from the S4c strain demonstrated the highest activity against Escherichia coli ATCC 10,231 and the lowest activity against Klebsiella pneumonia ATCC 13,883. CONCLUSION: The present work focused on increasing the CuNPs production by two isolates, Niallia circulans G9 and Paenibacillus sp. S4c, which were then characterized alongside. The used analytics and chemical composition techniques validated the existence of CuONPs in the G9 and S4c biosynthesized nano cupper. CuNPs of S4c are smaller and have a more varied shape than those of G9 strain, according to TEM images. In terms of antibacterial activity, the biosynthesized CuNPs from G9 and S4c were found to be more effective against Candida albicans ATCC 10,231 and E. coli ATCC 10,231, respectively.

Isolation and characterization of Candida tropicalis B: a promising yeast strain for biodegradation of petroleum oil in marine environments.

The increasing interest in environmental protection laws has compelled companies to regulate the disposal of waste organic materials. Despite efforts to explore alternative energy sources, the world remains heavily dependent on crude petroleum oil and its derivatives. The expansion of the petroleum industry has significant implications for human and environmental well-being. Bioremediation, employing living microorganisms, presents a promising approach to mitigate the harmful effects of organic hydrocarbons derived from petroleum. This study aimed to isolate and purify local yeast strains from oil-contaminated marine water samples capable of aerobically degrading crude petroleum oils and utilizing them as sole carbon and energy sources. One yeast strain (isolate B) identified as Candida tropicalis demonstrated high potential for biodegrading petroleum oil in seawater. Physiological characterization revealed the strain's ability to thrive across a wide pH range (4-11) with optimal growth at pH 4, as well as tolerate salt concentrations ranging from 1 to 12%. The presence of glucose and yeast extract in the growth medium significantly enhanced the strain's biomass formation and biodegradation capacity. Scanning electron microscopy indicated that the yeast cell diameter varied based on the medium composition, further emphasizing the importance of organic nitrogenous sources for initial growth. Furthermore, the yeast strain exhibited remarkable capabilities in degrading various aliphatic and aromatic hydrocarbons, with a notable preference for naphthalene and phenol at 500 and 1000 mg/l, naphthalene removal reached 97.4% and 98.6%, and phenol removal reached 79.48% and 52.79%, respectively. Optimization experiments using multi-factorial sequential designs highlighted the influential role of oil concentration on the bioremediation efficiency of Candida tropicalis strain B. Moreover, immobilized yeast cells on thin wood chips demonstrated enhanced crude oil degradation compared to thick wood chips, likely due to increased surface area for cell attachment. These findings contribute to our understanding of the potential of Candida tropicalis for petroleum oil bioremediation in marine environments, paving the way for sustainable approaches to address oil pollution.

A scalable overexpression of a thermostable recombinant poly-histidine tag carboxyl esterase under lambda promoter: purification, characterization, and protein modelling.

BACKGROUND: As a white biotechnological trend, esterases are thought to be among the most active enzymes' classes in biocatalysis and synthesis of industrially importance organic compounds. Esterases are used in many applications such as the manufacture of pharmaceuticals, cosmetics, leather, textile, paper, food, dairy products, detergents, and treatment of some environmental pollutants. RESULTS: A poly-histidine moiety was added to the C-terminal end of the Geobacillus sp. gene encoding carboxyl esterase (EstB, ac: KJ735452) to facilitate one-step purification. This recombinant protein was successfully expressed in Escherichia coli (E. coli) under control of Lambda promoter (λ). An open reading frame (ORF) of 1500 bps encoding a polypeptide of 499 amino acid residues and a calculated molecular weight (54.7 kD) was identified as carboxyl-esterase B due to its conserved glycine-X-serine-X-glycine motif (G-X-S-X-G) and its high similarity toward other carboxyl esterases, where the 3-D tertiary structure of EstB was determined based on high homology % (94.8) to Est55. The expression was scaled up using 7-L stirred tank bioreactor, where a maximum yield of enzyme was obtained after 3.5 h with SEA 51.76 U/mg protein. The expressed protein was purified until unity using immobilized metal affinity chromatography (IMAC) charged with cobalt and then characterized. The purified enzyme was most active at pH 8.0 and remarkably stable at pH (8-10). Temperature optimum was recorded at 65 °C, and it kept 70% of its activity after 1-h exposure to 60 °C. The active half-live of enzyme was 25 min at 70 °C and a calculated T melting (Tm) at 70 °C. The determined reaction kinetics Michaelis-Menten constant (Km), maximum velocity rate (Vmax), the turnover number (Kcat), and catalytic efficiency (Kcat/Km) of the pure enzyme were found 22.756 mM, 164.47 U/ml (59.6 min-1), and (2.619 mol/ min), respectively. CONCLUSION: Creation of a recombinant 6 × -His estB derived from a thermophile Geobacillus sp. was performed successfully and then overexpressed under λ-promoter. In a bench scale bioreactor, the overexpression was grown up, followed by one-step purification and biochemical characterization. The recorded promising pH and temperature stability properties suggest that this expressed carboxyl esterase could be used in many industrial sectors.

Superior anti-pulmonary viral potential of Natrialba sp. M6-producing surfactin and C50 carotenoid pigment with unveiling its action modes.

BACKGROUND: Respiratory viruses, particularly adenoviruses (ADV), influenza A virus (e.g., H1N1), and coronaviruses (e.g., HCoV-229E and SARS-CoV-2) pose a global public health problem. Therefore, developing natural wide-spectrum antiviral compounds for disrupting the viral life cycle with antioxidant activity provides an efficient treatment approach. Herein, biosurfactant (Sur) and C50 carotenoid pigment (Pig) of haloalkaliphilic archaeon Natrialba sp. M6 which exhibited potent efficacy against hepatitis and anti-herpes simplex viruses, were investigated against pulmonary viruses. METHODS: The cytotoxicity of the extracted Sur and Pig was examined on susceptible cell lines for ADV, HIN1, HCoV-229E, and SARS-CoV-2. Their potential against the cytopathic activity of these viruses was detected with investigating the action modes (including, virucidal, anti-adsorption, and anti-replication), unveiling the main mechanisms, and using molecular docking analysis. Radical scavenging activity was determined and HPLC analysis for potent extract (Sur) was performed. RESULTS: All current investigations stated higher anti-pulmonary viruses of Sur than Pig via mainly virucidal and/or anti-replicative modes. Moreover, Sur had stronger ADV's capsid protein binding, ADV's DNA polymerase inhibition, suppressing hemagglutinin and neuraminidase of H1N1, and inhibiting chymotrypsin-like (3CL) protease of SARS-CoV-2, supporting with in-silico analysis, as well as radical scavenging activity than Pig. HPLC analysis of Sur confirmed the predominate presence of surfactin in it. CONCLUSION: This study declared the promising efficacy of Sur as an efficient pharmacological treatment option for these pulmonary viruses and considered as guide for further in vivo research.

Isotherm and kinetic studies of cadmium biosorption and its adsorption behaviour in multi-metals solution using dead and immobilized archaeal cells.

It is crucial to identify more biological adsorbents that can efficiently uptake metals from wastewater. Dry haloalkaliphilic archaea Natronolimnobius innermongolicuswas evaluated for Cd ions biosorption. The optimal operating conditions (pH, biomass dose, initial metal concentration, contact time, and isotherms models) were tested. Biosorption process is influenced by the metal's solution pH with maximum removal of 83.36% being achieved at pH 8. Cadmium ions uptake reaches equilibrium in about 5 min of biosorption process. The Langmuir model was determined to better fit the Cd(II) biosorption by dry archaea. The maximal uptake capacity (qmax) of Cd(II) was 128.21 mg/g. The effect of multi-component system on biosorption behaviour of Pb, Ni, Cu, Fe, and Cd ions by immobilized dried archaeal cells, dried archaeal cells, and dried bryozoa was studied using Plackett-Burman experimental design. The investigated biosorbents were effective at removing metals from contaminated systems, particularly for Fe, Pb, and Cd ions. Moreover, the interaction behaviour of these metals was antagonistic, synergistic, or non-interactive in multi-metals system. SEM, EDX, and FTIR spectra revealed changes in surface morphology of the biomass through the biosorption process. Finally, continuous adsorption experiment was done to examine the ability of immobilized biomass to adsorb metals from wastewater.

Sustainable production of bacterioruberin carotenoid and its derivatives from Arthrobacter agilis NP20 on whey-based medium: optimization and product characterization.

Bacterioruberin and its rare glycosylated derivatives are produced by Arthrobacter agilis as an adaptation strategy to low temperature conditions. The high antioxidant properties of bacterioruberin held great promise for different future applications like the pharmaceutical and food industries. Microbial production of bacterioruberin via a cost-effective medium will help increase its commercial availability and industrial use. The presented study aims to optimize the production of the rare C50 carotenoid bacterioruberin and its derivatives from the psychotrophic bacteria Arthrobacter agilis NP20 strain on a whey-based medium as a cost effective and readily available nutritious substrate. The aim of the study is extended to assess the efficiency of whey treatment in terms of estimating total nitrogen content in treated and untreated whey samples. The significance of medium ingredients on process outcome was first tested individually; then the most promising factors were further optimized using Box Behnken design (BBD). The produced carotenoids were characterized using UV-visible spectroscopy, FTIR spectroscopy, HPLC-DAD chromatography and HPLC-APCI-MS spectrometry. The maximum pigment yield (5.13 mg/L) was achieved after a 72-h incubation period on a core medium composed of 96% sweet whey supplemented with 0.46% MgSO4 & 0.5% yeast extract and inoculated with 6% (v/v) of a 24 h pre-culture (109 CFU/mL). The cost of the formulated medium was 1.58 $/L compared with 30.1 $/L of Bacto marine broth medium. The extracted carotenoids were identified as bacterioruberin, bis-anhydrobacteriouberin, mono anhydrobacterioruberin, and glycosylated bacterioruberin. The presented work illustrates the possibility of producing bacterioruberin carotenoid from Arthrobacter agilis through a cost-effective and eco-friendly approach using cheese whey-based medium.

Maximization of red pigment production from Streptomyces sp. LS1 structure elucidation and application as antimicrobial/antifouling against human pathogens and marine microbes.

BACKGROUND: Natural dyes are present in living organisms such as animals and plants and microorganisms such as fungi, bacteria, algae, and yeast. Pigments are fast and easy growth by using cheap components and do not effect by environmental conditions because they required some physical factors like heat, light, and pH and also they have many biotechnological applications such as medical and industrial needs. The natural pigments can act as antimicrobial agents and are used in drug manufacturing. Also, it can be used in the food industry as natural colorants instead of the synthetic colorants due to their safety on human health and low toxicity when emitted into the environment. RESULTS: A pigmented actinomycetes LS1 strain isolated from El Mahmoudia canal (sediment soil) located in Egypt was microscopically examined and identified as Streptomyces sp. by molecular approach. Extraction, purification, and characterization of produced red pigment metabolite like carotenoids related were established based on spectroscopic studies and comparing the data from the literature. Factors (nutritional and physical) influencing red pigmentation by this isolate were investigated through One Variable At Time (OVAT), and then, the optimal levels of the significant key variables were recorded. Also, the productivity yield reached 30 mg of dried purified pigment/gram dry weight. The biological activity of the red product was tested against Gram-positive and Gram-negative marine bacterial pathogens; the recorded antimicrobial activity is more prominent against (P. aeruginosa ATCC 9027, K. pneumoniae ATCC 13883, S. aureus ATCC 6538, B. subtilis ATCC 6633 and E. coli ATCC 10418) at nearly 0.07 mg mL-1 concentration. Also, the tested red pigment showed a positive antifouling activity (AF) against marine microbes; the activity increased by increasing the pigment concentrations from 1 to 3 mg mL-1. CONCLUSION: The present work focused on the optimization of culture conditions for the production of red pigment by Streptomyces sp. LS1; then, the antibacterial activity and antifouling activity of the produced pigments were tested.

Fabrication of biodegradable chicken feathers into ecofriendly-functionalized biomaterials: characterization and bio-assessment study.

This study aims to investigate novel applications for chicken feather waste hydrolysate through a green, sustainable process. Accordingly, an enzymatically degraded chicken feather (EDCFs) product was used as a dual carbon and nitrogen source in the production medium of bacterial cellulose (BC). The yield maximization was attained through applying experimental designs where the optimal level of each significant variable was recorded and the yield rose 2 times. The produced BC was successfully characterized by FT-IR, XRD and SEM. On the other hand, sludge from EDCFs was used as a paper coating agent. The mechanical features of the coated papers were evaluated by bulk densities, maximum load, breaking length, tensile index, Young's modulus, work to break and coating layer. The results showed a decrease in tensile index and an increase in elongation at break. These indicate more flexibility of the coated paper. The coated paper exhibits higher resistance to water vapor permeability and remarkable oil resistance compared to the uncoated one. Furthermore, the effectiveness of sludge residue in removing heavy metals was evaluated, and the sorption capacities were ordered as Cu ++ > Fe ++ > Cr ++ > Co ++ with high affinity (3.29 mg/g) toward Cu ++ and low (0.42 mg/g) towards Co ++ in the tested metal solution.

Production and statistical optimization of cholesterol-oxidase generated by Streptomyces sp. AN strain.

BACKGROUND: Cholesterol oxidases (CHOs) have attracted enormous attention because of their wide biotechnological potential. The present study explores the production of CHOs by Streptomyces sp. AN. Evaluation of culture conditions affecting enzyme production, medium optimization and released metabolite characteristics were also investigated. RESULTS: The current work reports the isolation of 37 colonies (bacteria/actinobacteria) with different morphotypes from different soil/water samples. The isolate-coded AN was selected for its high potency for CHO production. Morphological characteristics and the obtained partial sequence of 16srRNA of AN showed 99.38% identity to Streptomyces sp. strain P12-37. Factors affecting CHO production were evaluated using Plackett-Burman (PB) and Box-Behnken (BB) statistical designs to find out the optimum level of the most effective variables, namely, pH, starch, NH4NO3 and FeSO4.7H2O with a predicted activity of 6.56 U/mL. According to this optimization, the following medium composition was considered to be optimum (g/L): cholesterol 1, starch 6, MgSO4.7H2O 0.1, CaCl2 0.01, FeSO4.7H2O 0.1, NH4NO3 23.97, yeast extract (YE) 0.2, K2HPO4 0.01, KH2PO4 0.1, NaCl 0.01, Tween 20 0.01, pH 6.36 and incubation temperature (30 °C) for 9 days. Spectophotometric analysis for released metabolites against cholesterol (standard) via Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) was carried out. FTIR spectrum showed the appearance of new absorption peaks at 1644 and 1725cm-1; this confirmed the presence of the Keto group (C=O) stretch bond. Besides, fermentation caused changes in thermal properties such as melting temperature peak (99.26; 148.77 °C), heat flow (- 8; - 3.6 Mw/mg), capacity (- 924.69; - 209.77 mJ) and heat enthalpy (- 385.29; 69.83 J/g) by comparison to the standard cholesterol as recognized through DSC thermogram. These changes are attributed to the action of the CHO enzyme and the release of keto derivatives of cholesterol with different properties. CONCLUSION: Streptomyces sp. AN was endowed with the capability to produce CHO. Enzyme maximization was followed using a statistical experimental approach, leading to a 2.6-fold increase in the overall activity compared to the basal condition. CHO catalyzed the oxidation of cholesterol; this was verified by the appearance of a new keto group (C=O) peak at 1644 and 1725 cm-1 observed by FTIR spectroscopic analysis. Also, DSC thermogram demonstrates the alteration of cholesterol triggered by CHO.

Bioprocess development for biosurfactant production by Natrialba sp. M6 with effective direct virucidal and anti-replicative potential against HCV and HSV.

Halophilic archaea is considered an promising natural source of many important metabolites. This study focused on one of the surface-active biomolecules named biosurfactants produced by haloarchaeon Natrialba sp. M6. The production trend was optimized and the product was partially purified and identified using GC-Mass spectrometry. Sequential optimization approaches, Plackett-Burman (PB) and Box-Behnken Designs (BBD) were applied to maximize the biosurfactants production from M6 strain by using 14 factors; pH, NaCl, agitation and glycerol; the most significant factors that influenced the biosurfactant production were used for Response Surface Methodology (RSM). The final optimal production conditions were agitation (150 rpm), glycerol (3%), NaCl (20.8%), pH (12) and cultivation temperature (37°C). GC-Mass spectrometry for the recovered extract revealed the presence of a diverse group of bipolar nature, hydrophobic hydrocarbon chain and charged function group. The majority of these compounds are fatty acids. Based on results of GC-MS, compositional analysis content and Zetasizer, it was proposed that the extracted biosurfactant produced by haloarchaeon Natrialba sp. M6 could be a cationic lipoprotein. The antiviral activity of such biosurfactant was investigated against hepatitis C (HCV) and herpes simplex (HSV1) viruses at its maximum safe doses (20 µg/mL and 8 µg/mL, respectively). Its mode of antiviral action was declared to be primarily via deactivating viral envelopes thus preventing viral entry. Moreover, this biosurfactant inhibited RNA polymerase- and DNA polymerase-mediated viral replication at IC50 of 2.28 and 4.39 µg/mL, respectively also. Molecular docking studies showed that surfactin resided well and was bound to the specified motif with low and accepted binding energies (ΔG = - 5.629, - 6.997 kcal/mol) respectively. Therefore, such biosurfactant could be presented as a natural safe and effective novel antiviral agent.

Bioprocess development for bacterial cellulose biosynthesis by novel Lactiplantibacillus plantarum isolate along with characterization and antimicrobial assessment of fabricated membrane.

Bacterial cellulose (BC) is an ecofriendly biopolymer with diverse commercial applications. Its use is limited by the capacity of bacterial production strains and cost of the medium. Mining for novel organisms with well-optimized growth conditions will be important for the adoption of BC. In this study, a novel BC-producing strain was isolated from rotten fruit samples and identified as Lactiplantibacillus plantarum from 16S rRNA sequencing. Culture conditions were optimized for supporting maximal BC production using one variable at a time, Plackett-Burman design, and Box Behnken design approaches. Results indicated that a modified Yamanaka medium supported the highest BC yield (2.7 g/l), and that yeast extract, MgSO4, and pH were the most significant variables influencing BC production. After optimizing the levels of these variables through Box Behnken design, BC yield was increased to 4.51 g/l. The drug delivery capacity of the produced BC membrane was evaluated through fabrication with sodium alginate and gentamycin antibiotic at four different concentrations. All membranes (normal and fabricated) were characterized by scanning electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction, and mechanical properties. The antimicrobial activity of prepared composites was evaluated by using six human pathogens and revealed potent antibacterial activity against Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, and Streptococcus mutans, with no detected activity against Pseudomonas aeruginosa and Candida albicans.

Cloning of cellulase gene using metagenomic approach of soils collected from Wadi El Natrun, an extremophilic desert valley in Egypt.

BACKGROUND: Wadi El Natrun microorganisms have been considered as a new resource for natural products due to its extreme condition of salinity and alkalinity. Therefore, this study was devoted to generate metagemic library from soils collected from such an extreme environment in order to clone a novel cellulase for physique industrial applications. RESULTS: Total soil-DNA was successfully extracted, and then digested by different restriction enzymes. Purified fragments ranged ~ 200-6500 bp were ligated and were cloned into plasmid cloning vector (pUC19) by using Escherichia coli DH5α (E. coli) host cells. A constructed metagenomic library composed of 270 clones was screened on carboxymethylcellulose (CMC) agar plate where the active clones had been characterized by the formation of the yellowish halo zone. Thereafter, clone 1 was selected as the most active as being based on cellulase activity quantification (19 µ/ml). Plasmid related to clone 1 encoded cellSNSY gene of approximately 1.5 kb was subjected to molecular characterization; the obtained partial sequence of 861 bps encoded 287 amino acids showing 76% similarity to the endoglucanase gene of Bacillus amyloliquefaciens. The recombinant cellSNSY was expressed under lacz promoter at 1 mM of isopropyl ß-d-1-thiogalactopyranoside (IPTG), giving 21 µ/ml cellulase after ~ 27 h. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and an activity staining of the recombinant cellSNSY which revealed an active band with a molecular mass ~ 59 kDa appeared in the induced sample. The maximum enzyme activity of crude cellSNSY was observed at 45 °C and for a pH of 8.5. Interestingly, the enzyme activity was slightly inhibited by ethylenediamine tetraacetic acid (EDTA) and methanol. It showed high resistance to the tested heavy metals and the surfactant which ordered Zn> (SDS,Fe)>Mn>Cu. CONCLUSIONS: This study established an easy and a skillful way to clone/express a new found cellulase gene(s) under lacZ promoter. The isolated recombinant cellSNSY showed 76% similarity to endoglucanase gene, and the enzyme showed tolerance to the mostly tested agents including heavy metals, surfactant, solvents, and EDTA. Additionally, the studied recombinant showed a high stability up to 55 °C and for alkaline pH 8.5. These features make it an ample and viable for many applications.

Biovalorization of raw agro-industrial waste through a bioprocess development platform for boosting alkaline phosphatase production by Lysinibacillus sp. strain APSO.

This study highlighted the exploitation of mathematical models for optimizing the growth conditions that give the highest phosphatase productivity from a newfound Lysinibacillus sp. strain APSO isolated from a slime sample. Mathematical models facilitate data interpretation and provide a strategy to solve fermentation problems. Alkaline phosphatase (ALP) throughput was enhanced by 16.5-fold compared to basal medium based on a sequential optimization strategy that depended on two-level Plackett-Burman design and central composite design. The additional improvement for volumetric productivity and specific production yield was followed in a 7 L bench-top bioreactor to evaluate microbial growth kinetics under controlled and uncontrolled pH conditions. The pH-controlled batch cultivation condition neither supported cell growth nor enhanced ALP productivity. In contrast, the uncontrolled pH batch cultivation condition provided the highest ALP output (7119.4 U L-1) and specific growth rate (µ = 0.188 h-1) at 15 h from incubation time, which was augmented > 20.75-fold compared to the basal medium. To the authors' knowledge, this study is the second report that deals with how to reduce the production cost of the ALP production process via utilization of agro-industrial waste, such as molasses and food waste (eggshell), as a nutrimental source for the improvement of the newfound Lysinibacillus sp. strain APSO ALP throughput.

Feather protein lysate optimization and feather meal formation using YNDH protease with keratinolytic activity afterward enzyme partial purification and characterization.

Incubation parameters used for the creation of a protein lysate from enzymatically degraded waste feathers using crude keratinase produced by the Laceyella sacchari strain YNDH were optimized using the Response Surface Methodology (RSM); amino acids quantification was also estimated. The optimization elevated the total protein to 2089.5 µg/ml through the application of the following optimal conditions: a time of 20.2 h, a feather concentration (conc.) of 3 g%, a keratinase activity of 24.5 U/100 ml, a pH of 10, and a cultivation temperature of 50 °C. The produced Feather Protein Lysate (FPL) was found to be enriched with essential and rare amino acids. Additionally, this YNDH enzyme group was partially purified, and some of its characteristics were studied. Crude enzymes were first concentrated with an Amicon Ultra 10-k centrifugal filter, and then concentrated proteins were applied to a "Q FF" strong anion column chromatography. The partially purified enzyme has an estimated molecular masses ranging from 6 to 10 kDa. The maximum enzyme activity was observed at 70 °C and for a pH of 10.4. Most characteristics of this protease/keratinase group were found to be nearly the same when the activity was measured with both casein and keratin-azure as substrates, suggesting that these three protein bands work together in order to degrade the keratin macromolecule. Interestingly, the keratinolytic activity of this group was not inhibited by ethylenediamine tetraacetic acid (EDTA), phenylmethanesulfonyl fluoride (PMSF), or iron-caused activation, indicating the presence of a mixed serine-metallo enzyme type.

Dynamic consolidated bioprocessing for innovative lab-scale production of bacterial alkaline phosphatase from Bacillus paralicheniformis strain APSO.

To meet the present and forecasted market demand, bacterial alkaline phosphatase (ALP) production must be increased through innovative and efficient production strategies. Using sugarcane molasses and biogenic apatite as low-cost and easily available raw materials, this work demonstrates the scalability of ALP production from a newfound Bacillus paralicheniformis strain APSO isolated from a black liquor sample. Mathematical experimental designs including sequential Plackett-Burman followed by rotatable central composite designs were employed to select and optimize the concentrations of the statistically significant media components, which were determined to be molasses, (NH4)2NO3, and KCl. Batch cultivation in a 7-L stirred-tank bioreactor under uncontrolled pH conditions using the optimized medium resulted in a significant increase in both the volumetric and specific productivities of ALP; the alkaline phosphatase throughput 6650.9 U L-1, and µ = 0.0943 h-1; respectively, were obtained after 8 h that, ameliorated more than 20.96, 70.12 and 94 folds compared to basal media, PBD, and RCCD; respectively. However, neither the increased cell growth nor enhanced productivity of ALP was present under the pH-controlled batch cultivation. Overall, this work presents novel strategies for the statistical optimization and scaling up of bacterial ALP production using biogenic apatite.