Development of a Biopolymer-Based Anti-Fog Coating with Sealing Properties for Applications in the Food Packaging Sector.

The quest for sustainable and functional food packaging materials has led researchers to explore biopolymers such as pullulan, which has emerged as a notable candidate for its excellent film-forming and anti-fogging properties. This study introduces an innovative anti-fog coating by combining pullulan with poly (acrylic acid sodium salt) to enhance the display of packaged food in high humidity environments without impairing the sealing performance of the packaging material-two critical factors in preserving food quality and consumers' acceptance. The research focused on varying the ratios of pullulan to poly (acrylic acid sodium salt) and investigating the performance of this formulation as an anti-fog coating on bioriented polypropylene (BOPP). Contact angle analysis showed a significant improvement in BOPP wettability after coating deposition, with water contact angle values ranging from ~60° to ~17° for formulations consisting only of poly (acrylic acid sodium salt) (P0) or pullulan (P100), respectively. Furthermore, seal strength evaluations demonstrated acceptable performance, with the optimal formulation (P50) achieving the highest sealing force (~2.7 N/2.5 cm) at higher temperatures (130 °C). These results highlight the exceptional potential of a pullulan-based coating as an alternative to conventional packaging materials, significantly enhancing anti-fogging performance.

Application of low-, and medium-molecular weight chitosan for preparation of spray-dried microparticles loaded with Ferulago angulata essential oil: Physicochemical, antioxidant, antibacterial and in-vitro release properties.

The present work aimed at spray-drying encapsulation of Chavir (Ferulago angulata) essential oil (EO) using low-, and medium-molecular weight chitosan. The obtained EO was observed to be mainly composed of ß-ocimene, α-pinene, and bornyl acetate with antioxidant, and antimicrobial activity. The results indicated that stable emulsions with uniform particle size distribution and encapsulation efficiencies higher than 93 % could be prepared using chitosan as feed for spray-drying. In addition, spray-drying resulted in fabricating stable microspheres with yields higher than 50 %, uniform particle size, and encapsulation efficiency exceeding 70 %. The microspheres were fairly soluble and hygroscopic, and exhibited antioxidant and bacteriostatic activities with a biphasic release pattern. FTIR characterisation confirmed successful encapsulation of EO and thermal properties of microspheres indicated enhanced stability of EO after microencapsulation. Overall, it was revealed that molecular weight of chitosan and EO:chitosan ratio affects some physicochemical properties of obtained chitosan microspheres.

Application of structurally modified WPC in combination with maltodextrin for microencapsulation of Roselle (Hibiscus sabdariffa) extract as a natural colorant source for gummy candy.

The aim of this work was to improve the stability of Roselle extract (RE) by spray-drying using maltodextrin (MD) alone, and in combination with WPC in the forms of unmodified and modified (via ultrasonication, UWPC, or enzymatic hydrolysis, HWPC). Enzymatic hydrolysis by improving the surface activity of WPC increased spray-drying yield (75.1 %), and improved physical (flow) and functional (solubility, and emulsifying) properties of obtained microparticles. Degree of hydrolysis of the primary WPC (2.6 %) was increased to 6.1 % and 24.6 % after ultrasonication and hydrolysis, respectively. Both modifications caused a significant increase in the solubility of WPC, in a way that initial solubility (10.6 %, at pH = 5) was significantly increased to 25.5 % in UWPC, and to 87.3 % in HWPC (P < 0.05). Furthermore, emulsifying activity (20.6 m2/g) and emulsifying stability (17 %) indices of primary WPC (at pH = 5) were significantly increased to 32 m2/g and 30 % in UWPC, and to 92.4 m2/g and 69.0 % in HWPC, respectively (P < 0.05). FT-IR analysis indicated successful encapsulation of RE within carriers' matrix. According to FE-SEM study, the surface morphology of microparticles was improved when modified HWPC was used as a carrier. Microencapsulation of RE with HWPC showed the highest contents of total phenolic compounds (13.3 mg GAE/mL), total anthocyanins (9.1 mg C3G/L) as well as a higher retention of antioxidant activity according to ABTS+ (85.0 %) and DPPH (79.5 %) radicals scavenging assays. Considering all properties of microparticles obtained by HWPC next to their color attributes, it can be concluded that HWPC-RE powders could be used as natural colorant and antioxidant source for the fortification of gummy candy. Gummy candy obtained using 6 % concentration of the above powder gave the highest overall sensory scores.

Nanoencapsulation of Chavir (Ferulago angulata) essential oil in chitosan carrier: Investigating physicochemical, morphological, thermal, antimicrobial and release profile of obtained nanoparticles.

The essential oil obtained by steam-distillation from Ferulago angulata (FA) was stabilized by ionic-gelation technique within chitosan nanoparticles (CSNPs). The aim of this study was to investigate different properties of CSNPs loaded with FA essential oil (FAEO). GC-MS analysis detected the major components of FAEO as α-pinene (21.85 %), ß-ocimene (19.37 %), bornyl acetate (10.50 %) and thymol (6.80 %). Due to presence of these components, FAEO showed stronger antibacterial activity against S. aureus and E. coli with MIC values of 0.45 and 2.12 mg/mL, respectively. Chitosan to FAEO ratio of 1: 1.25 exhibited a maximum encapsulation efficiency (60.20 %) and loading capacity (24.5 %) values. By increasing loading ratio from 1:0 to 1:1.25, mean particle size and polydispersity index were significantly (P < 0.05) increased from 175 to 350 nm and 0.184 to 0.32, respectively, while zeta potential was decreased from +43.5 to +19.2 mV, indicating the physical instability of CSNPs at higher FAEO loading concentrations. SEM observation proved successful formation of spherical CSNPs during the nanoencapsulation of EO. FTIR spectroscopy indicated successful physical entrapment of EO within CSNPs. Differential scanning calorimetry also proved the physical entrapment of FAEO into polymeric matrix of chitosan. XRD exhibited a broad peak at 2θ = 19° - 25° in loaded-CSNPs as indication of successful entrapment of FAEO within CSNPs. Thermogravimetric analysis showed that encapsulated essential oil was decomposed at higher temperature than its free from, indicating the success of encapsulation technique in stabilizing FAEO within CSNPs.

Microencapsulation of Yerba mate extract: The efficacy of polysaccharide/protein hydrocolloids on physical, microstructural, functional, and antioxidant properties.

Effects of hydrolyzed whey protein concentrate (WPC) and its combination with polysaccharides as wall material in spray-drying microencapsulation of Yerba mate extract (YME) have not been investigated yet. Therefore, it is hypothesized that the surface-active properties of WPC or WPC-hydrolysate may improve different properties of spray-dried microcapsules (such as physicochemical, structural, functional and morphological properties) compared to neat MD and GA. Thus, the objective of current study was to produce microcapsules loaded with YME by different carrier combinations. Effect of maltodextrin (MD), maltodextrin-gum Arabic (MD-GA), maltodextrin-whey protein concentrate (MD-WPC), and maltodextrin-hydrolyzed WPC (MD-HWPC) as encapsulating hydrocolloids was studied on physicochemical, functional, structural, antioxidant and morphological characteristics of the spray-dried YME. The type of carrier significantly affected spray dying yield. Enzymatic hydrolysis by improving the surface activity of WPC increased its efficiency as a carrier and produced particles with high production yield (about 68 %) and excellent physical, functional, hygroscopicity and flowability indices. Chemical structure characterization by FTIR indicated the placement of phenolic compounds of the extract in the carrier matrix. FE-SEM study showed that the microcapsules produced with polysaccharide-based carriers were completely wrinkled, whereas, the surface morphology of particles was improved when protein-based carriers were applied. Among the produced samples, the highest amount of TPC (3.26 mg GAE/mL), inhibition of DPPH (76.4 %), ABTS (88.1 %) and hydroxyl (78.1 %) free radicals were related to microencapsulated extract with MD-HWPC. The results of this research can be used to stabilize plant extracts and produce powders with appropriate physicochemical properties and biological activity.

Development and Application of Dual-Sensors Label in Combination with Active Chitosan-Based Coating Incorporating Yarrow Essential Oil for Freshness Monitoring and Shelf-Life Extension of Chicken Fillet.

This study aimed for the application of active chitosan coating incorporating yarrow essential oil (YEO) together with the development of an on-package sensor label based on bromocresol purple (BCP) and methyl red (MR) for shelf-life extension and freshness monitoring of chicken breast fillet. Physiochemical and microbiological attributes of chicken meat coated with sole chitosan, YEO, and chitosan + YEO were compared with those of uncoated (control) samples. Chitosan + YEO coated chicken meat stayed fresh with no significant changes (p > 0.05) in pH (5.42−5.56), TVB-N (12.55−15.36 mg N/100 g), TBARs (0.35−0.40 mg MDA/kg) and total aerobic psycrotrophic bacteria (3.97−4.65 log CFU/g) in days 1−15. There was no response of the dual-sensors label toward the variation in chemical and microbiological indicators of chicken meat coated with chitosan + YEO. However, either uncoated, sole chitosan, or sole YEO treatments indicated a three-stage freshness status with the fresh stage belonged to a period earlier than day 7 (with no distinct color change in both sensor labels); the semi-fresh stage corresponded to storage days between 7−9, wherein a gradual color change appeared (MR from pink to orange, BCP from yellow to light purple); and the spoiled stage occurred in day 9 onward with a drastic color change (MR from orange to light yellow, BCP from light purple to deep purple). In general, the dual-sensors successfully responded to the variation of chemical and microbiological indicators and visual color of uncoated samples during storage time. Based on the obtained results, the application of chitosan + YEO coating efficiently prolonged the freshness of chicken breast meat, where on-package dual-sensors systems were able to detect the freshness stages of meat samples during storage time.

Impact of high-pressure treatment on casein micelles, whey proteins, fat globules and enzymes activity in dairy products: a review.

The quality and safety of food products are the two factors that most influence the demands made by consumers. Contractual food sterilization and preservation methods often result in unfavorable changes in functional properties of foods. High-pressure processing (HPP) (50-1000 MPa) is a non-thermal preservation technique, which can effectively reduce the activity of spoilage and pathogenic microorganisms with minimal impact on the functional and nutritional properties of food. Comprehensive inquires have disclosed the potential profits of HPP as an alternative to heat treatments by affecting the structure of milk components, particularly proteins and fats. The present paper aims to investigate the effects of HPP on milk components including fats, casein, whey proteins, enzymes, and minerals, as well as on the industrial production of milk and dairy products including cheese, yogurt, ice cream, butter, cream, and probiotic dairy products. HPP allows to extend shelf life of products without the use of additives, meeting current consumer demands. The assurance of microbial safety and the production of food products with minimal changes in quality characteristics (organoleptic, nutritional, and rheological properties) are among its main effects. In addition, the nutritional value of HPP-treated dairy products is also preserved.

Chitosan nanoparticles encapsulating lemongrass (Cymbopogon commutatus) essential oil: Physicochemical, structural, antimicrobial and in-vitro release properties.

This study was aimed to encapsulate lemongrass (Cymbopogon commutatus) essential oil (LGEO) into chitosan nanoparticles (CSNPs) and to investigate their physicochemical, morphological, structural, thermal, antimicrobial and in-vitro release properties. CSNPs exhibited spherical morphology with an average hydrodynamic size of 175-235 nm. Increasing EO loading increased the average size of CSNPs from 174 to 293 nm (at CS:EO ratio from 1:0 to 1:1.25). SEM and AFM confirmed the results obtained by hydrodynamic size indicating that EO loading led to formation of large aggregated NPs. The successful physical entrapment of EO within NPs was shown by fourier-transform infrared spectroscopy. X-ray diffractogram of loaded-CSNPs compared to non-loaded CSNPs exhibited a broad high intensity peak at 2θ = 19-25° implying the entrapment of LGEO within CSNPs. Thermogravimetric analysis (TGA) showed that encapsulated EO was decomposed at a temperature of 252 °C compared to a degradation temperature of 126 °C for pure LGEO, indicating a two-fold enhancement in thermal stability of encapsulated CSNPs. Differential scanning calorimetry also proved the physical entrapment of EO into polymeric matrix of chitosan. In-vitro release study showed a time- and pH-dependent release of EO into release media demonstrating a three-stage release behavior with a rapid initial release of EO, followed by a steady state migration of EO from its surrounding envelope at the later stages. Antimicrobial assay showed strong antimicrobial properties of free form of LGEO against the bacteria (both gram positive and gram negative) and fungi species tested. Moreover, loaded-CSNPs exhibited stronger antibacterial and anti-fungal activities than non-loaded CSNPs.

Chitosan Nanoparticles as a Promising Nanomaterial for Encapsulation of Pomegranate (Punica granatum L.) Peel Extract as a Natural Source of Antioxidants.

The encapsulation of pomegranate peel extract (PPE) in chitosan nanoparticles (CSNPs) is an advantageous strategy to protect sensitive constituents of the extract. This study was aimed to develop PPE-loaded CSNPs and characterize their physical, structural morphology, antioxidant and antimicrobial properties. Spherical NPs were successfully synthesized with a mean diameter of 174-898 nm, a zeta potential (ZP) of +3-+36 mV, an encapsulation efficiency (EE) of 26-70%, and a loading capacity (LC) of 14-21% depending on their loaded extract concentrations. Based on these results, CSNPs with chitosan:PPE ratio of 1:0.50 (w/w) exhibited good physical stability (ZP = 27 mV), the highest loading (LC = 20%) and desirable encapsulation efficiency (EE = 51%), and thus, selected as optimally loaded NPs. The FTIR analysis of PPE-CSNPs demonstrated no spectral changes indicating no possible chemical interaction between the PPE and CSNPs, which confirms that the PPE was physically entrapped within NPs. Moreover, FTIR spectra of pure PPE showed specific absorption bands (at 3293-3450 cm-1) attributed to the incidence of phenolic compounds, such as tannic acid, ellagic acid and gallic acid. Total phenolic content (TPC) and antioxidant analysis of selected CSNPs revealed that the encapsulated NPs had significantly lower TPC and antioxidant activity than those of pure PPE, indicating that CSNPs successfully preserved PPE from rapid release during the measurements. Antibacterial tests indicated that pure PPE and PPE-loaded CSNPs effectively retarded the growth of Gram-positive S. aureus with a minimum inhibitory concentration (MIC) of 0.27 and 1.1 mg/mL, respectively. Whereas Gram-negative E. coli, due to its protective cell membrane, was not retarded by pure PPE and PPE-CSNPs at the MIC values tested in this study. Gas chromatography-mass spectroscopy analysis confirmed the incidence of various phytochemicals, including phenolic compounds, fatty acids, and furfurals, with possible antioxidant or antimicrobial properties. Overall, CSNPs can be regarded as suitable nanomaterials for the protection and controlled delivery of natural antioxidants/antimicrobials, such as PPE in food packaging applications.

Properties of Dried Apricots Pretreated by Ultrasound-Assisted Osmotic Dehydration and Application of Active Coatings.

RESEARCH BACKGROUND: The worldwide demand for healthy and sulphur-free dried vegetables and fruits has grown. Combined ultrasound-assisted osmotic dehydration (UOD) and application of active coatings incorporating natural preservatives represents an attractive alternative to sulphuring to preserve the sensorial and nutritional quality of dried fruits. The aim of this study is to investigate the effect of osmotic dehydration (OD) and UOD, and the use of pectin coatings (alone or with citric acid or ascorbic acid) on physical, textural and microstructural properties of hot air-dried apricots. EXPERIMENTAL APPROACH: Fresh apricot cubes (1 cm3) were pretreated with either OD at 55 °C for 30 and 45 min or UOD at two ultrasonic frequencies of 25 and 35 kHz for 30 and 45 min followed by application of active coatings with pectin alone, pectin with citric acid or pectin with ascorbic acid for 10 min. All pretreated coated samples were then hot air-dried at 60 °C until a final moisture content of 20% (wet basis) was reached. Physical (shrinkage, apparent and bulk densities), chemical (browning value and water activity) and textural properties (firmness and shrinkage), microstructure and microbial load of dried apricots were studied. RESULTS AND CONCLUSIONS: Application of OD and UOD improved physical and textural properties of the dried apricots. Moreover, apparent and bulk densities, rehydration capacity of OD and UOD pre-treated samples increased, while shrinkage, water activity and microbial load decreased. Firmness of UOD pretreated samples was significantly (p<0.05) lower than that of OD ones. Likewise, increasing ultrasound frequency from 25 to 35 kHz led to a significant decrease in F max values of dried apricots. Furthermore, coating of the processed samples with pectin and citric acid increased F max value and decreased rehydration capacity of dried apricots. Scanning electron microscopy of both OD and UOD samples illustrated improvement of textural properties. The utilization of both OD pretreatment and edible pectin coatings resulted in a decrease in browning values. However, UOD increased browning values of the dried apricots. Coating of UOD samples with pectin and ascorbic acid resulted in substantial discolouration in hot air-dried apricots. NOVELTY AND SCIENTIFIC CONTRIBUTION: This study advances the knowledge in the field of fruit drying by combined application of OD or UOD pretreatments with active edible coatings on different properties of hot air-dried apricots.

Properties and Application of Multifunctional Composite Polypropylene-Based Films Incorporating a Combination of BHT, BHA and Sorbic Acid in Extending Donut Shelf-Life.

To extend the shelf-life of packaged donut without the addition of preservative, polypropylene-based active composite films loaded with a combination of sorbic acid, BHA and BHT were prepared by the extrusion moulding method: T1 (Control-pure PP-film), T2 (PP-BHT1%-SA2%), T3 (PP-BHA3%-SA2%) and T4 (PP-BHT1%-BHA1%-SA2%). The incorporation of active additives enhanced water vapour permeability (WVP) and increased oxygen permeability of films. Active films had higher antioxidant activity than pure PP in the order T4 > T2 > T3 (89.11, 83.40 and 79.16%). In vitro examinations demonstrated a significant antibacterial effect on Escherichia coli and S. aureus growth. Overall migration was not significantly different for watery food simulants, while in acidic and fatty foods increased it significantly. The effect of the active films on the fried and packaged donut samples showed significantly higher moisture contents and peroxide values, while acidity was lower. T2 film is proposed due to the preservation of the intrinsic properties of the film, increasing the storage period up to 25 to 50 days.

Migration analysis, antioxidant, and mechanical characterization of polypropylene-based active food packaging films loaded with BHA, BHT, and TBHQ.

Polypropylene (PP) based active composite films were prepared by adding butylated hydroxy anisole (BHA), butylated hydroxytoluene (BHT), and tertiary butylated hydroquinone (TBHQ) antioxidants using the extrusion molding process. All concentrations of BHT, 2% to 3% BHA, and 3% TBHQ significantly increased the tensile strength (TS) of the composite films compared with control films. Increasing antioxidant concentration decreased TS values for BHT films, whereas an opposite trend was observed for BHA and TBHQ films. BHA at < 2%, BHT at > 2%, and TBHQ at all added concentrations significantly reduced elongation at break (Eb ) of the composite films compared to control films. Water vapor permeability (WVP) of 1% BHT film was not significantly different from control. However, other antioxidants especially at increased concentrations significantly increased WVP values. TBHQ films with 300% to 662% increase had the highest WVP and BHT films with 5% to 81% increase had the lowest WVP among composite films. All three antioxidants had a negative effect on the transparency of the films; however the effect of BHA at higher concentrations was greater. The antioxidants did not change the color attributes of the films. Films containing all antioxidants showed 2,2-diphenyl-1-picrylhydrazyl radical-scavenging activity, which increased with increase in their concentration, especially for those containing 3 wt.% BHT and TBHQ. Overall, incorporating BHA and BHT into a PP matrix improved mechanical, barrier, antioxidant properties, and film appearance and consequently were proposed for the development of antioxidant active PP films. TBHQ film is not recommended for food packaging because of its weak mechanical properties (lower Eb and TS values, higher WVP, and greater migration).