Improved Neural Inductivity of Size-Controlled 3D Human Embryonic Stem Cells Using Magnetic Nanoparticles.

Background: To improve the efficiency of neural development from human embryonic stem cells, human embryoid body (hEB) generation is vital through 3-dimensional formation. However, conventional approaches still have limitations: long-term cultivation and laborious steps for lineage determination. Methods: In this study, we controlled the size of hEBs for ectodermal lineage specification using cell-penetrating magnetic nanoparticles (MNPs), which resulted in reduced time required for initial neural induction. The magnetized cells were applied to concentrated magnetic force for magnet-derived multicellular organization. The uniformly sized hEBs were differentiated in neural induction medium (NIM) and suspended condition. This neurally induced MNP-hEBs were compared with other groups. Results: As a result, the uniformly sized MNP-hEBs in NIM showed significantly improved neural inductivity through morphological analysis and expression of neural markers. Signaling pathways of the accelerated neural induction were detected via expression of representative proteins; Wnt signaling, dopaminergic neuronal pathway, intercellular communications, and mechanotransduction. Consequently, we could shorten the time necessary for early neurogenesis, thereby enhancing the neural induction efficiency. Conclusion: Overall, this study suggests not only the importance of size regulation of hEBs at initial differentiation stage but also the efficacy of MNP-based neural induction method and stimulations for enhanced neural tissue regeneration.

Secured delivery of basic fibroblast growth factor using human serum albumin-based protein nanoparticles for enhanced wound healing and regeneration.

BACKGROUND: Basic fibroblast growth factor (bFGF) is one of the critical components accelerating angiogenesis and tissue regeneration by promoting the migration of dermal fibroblasts and endothelial cells associated with matrix formation and remodeling in wound healing process. However, clinical applications of bFGF are substantially limited by its unstable nature due to rapid decomposition under physiological microenvironment. RESULTS: In this study, we present the bFGF-loaded human serum albumin nanoparticles (HSA-bFGF NPs) as a means of enhanced stability and sustained release platform during tissue regeneration. Spherical shape of the HSA-bFGF NPs with uniform size distribution (polydispersity index < 0.2) is obtained via a simple desolvation and crosslinking process. The HSA-bFGF NPs securely load and release the intact soluble bFGF proteins, thereby significantly enhancing the proliferation and migration activity of human dermal fibroblasts. Myofibroblast-related genes and proteins were also significantly down-regulated, indicating decrease in risk of scar formation. Furthermore, wound healing is accelerated while achieving a highly organized extracellular matrix and enhanced angiogenesis in vivo. CONCLUSION: Consequently, the HSA-bFGF NPs are suggested not only as a delivery vehicle but also as a protein stabilizer for effective wound healing and tissue regeneration.

Enhanced osteogenic differentiation of human mesenchymal stem cells using size-controlled graphene oxide flakes.

Recently, it has been revealed that the physical microenvironment can be translated into cellular mechanosensing to direct human mesenchymal stem cell (hMSC) differentiation. Graphene oxide (GO), a major derivative of graphene, has been regarded as a promising material for stem cell lineage specification due to its biocompatibility and unique physical properties to interact with stem cells. Especially, the lateral size of GO flakes is regarded as the key factor regulating cellular response caused by GO. In this work, GO that had been mechanically created and had an average diameter of 0.9, 1.1, and 1.7 m was produced using a ball-mill process. When size-controlled GO flakes were applied to hMSCs, osteogenic differentiation was enhanced by GO with a specific average diameter of 1.7 µm. It was confirmed that osteogenic differentiation was increased due to the enhanced expression of focal adhesion and the development of focal adhesion subordinate signals via extracellular signal-regulated kinase (ERK)-mitogen-activated protein kinase (MEK) pathway. These results suggest that size-controlled GO flakes could be efficient materials for promoting osteogenesis of hMSCs. Results of this study could also improve our understanding of the correlation between hMSCs and cellular responses to GO.

Enhancement of anti-tumor activity in melanoma using arginine deiminase fused with 30Kc19α protein.

Arginine deiminase (ADI) is a microbial-derived enzyme which catalyzes the conversion of L-arginine into L-citrulline. ADI originating from Mycoplasma has been reported to present anti-tumor activity against arginine-auxotrophic tumors, including melanoma. Melanoma cells are sensitive to arginine depletion due to reduced expression of argininosuccinate synthase 1 (ASS1), a key enzyme for arginine biosynthesis. However, clinical applications of recombinant ADI for melanoma treatment present some limitations. Since recombinant ADI is not human-derived, it shows instability, proteolytic degradation, and antigenicity in human serum. In addition, there is a problem of drug resistance issue due to the intracellular expression of once-silenced ASS1. Moreover, recombinant ADI proteins are mainly expressed as inclusion body forms in Escherichia coli and require a time-consuming refolding process to turn them back into active form. Herein, we propose fusion of recombinant ADI from Mycoplasma hominis and 30Kc19α, a cell-penetrating protein which also increases stability and soluble expression of cargo proteins, to overcome these problems. We inserted matrix metalloproteinase-2 cleavable linker between ADI and 30Kc19α to increase enzyme activity in melanoma cells. Compared to ADI, ADI-LK-30Kc19α showed enhanced solubility, stability, and cell penetration. The fusion protein demonstrated selective cytotoxicity and reduced drug resistance in melanoma cells, thus would be a promising strategy for the improved efficacy in melanoma treatment. KEY POINTS: • Fusion of ADI with 30Kc19α enhances soluble expression and productivity of recombinant ADI in E. coli • 30Kc19α protects ADI from the proteolytic degradation by shielding effect, helping ADI to remain active • Intracellular delivery of ADI by 30Kc19α overcomes ADI resistance in melanoma cells by degrading intracellularly expressed arginine.

Enhanced anti-cancer effect using MMP-responsive L-asparaginase fused with cell-penetrating 30Kc19 protein.

As the acute lymphoblastic leukaemia (ALL) develops, expression of L-asparaginase (ASNase) protein is known to decrease. Therefore, deficiency of the ASNase protein would be regarded as one of the significant indications of the ALL. For the treatment of ALL, recombinant ASNase protein derived from bacterial origin is used which causes cytotoxicity by deprivation of Asn. However, short half-life of the protein is an obstacle for medical use. In order to overcome this limit, recombinant ASNase was fused to 30Kc19 with protein-stabilizing and cell-penetrating properties. As the 30Kc19 protein may induce steric hindrance, we further added a PLGLAG linker sequence (LK) between the ASNase and 30Kc19. The treatment of ASNase-LK-30Kc19 fusion protein demonstrated enhanced stability, cell-penetrating property, and anti-cancer activity. Intracellular delivery of both the non-cleaved and cleaved forms of the protein were observed, suggesting that ASNase acted both internally and externally, performing high anti-cancer activity by effective depletion of intracellular Asn. Additionally, ASNase-LK-30Kc19 showed high selectivity towards cancer cells. In terms of the dosage, releasable ASNase from ASNase-LK-30Kc19 reached the same half-maximal inhibitory concentration at a concentration five times lower than non-releasable ASNase-30Kc19. Altogether, the findings suggest that this fusion approach has potential applications in the treatment of ALL.

Enhanced efficiency of generating human-induced pluripotent stem cells using Lin28-30Kc19 fusion protein.

Induced pluripotent stem cells (iPSCs) have intrinsic properties, such as self-renewal ability and pluripotency, which are also shown in embryonic stem cells (ESCs). The challenge of improving the iPSC generation efficiency has been an important issue and there have been many attempts to develop iPSC generation methods. In this research, we added Lin28, known as one of the reprogramming factors, in the form of a soluble recombinant protein from E. coli to improve the efficiency of human iPSC (hiPSC) generation, in respect of alkaline phosphatase (AP)-positive colonies. To deliver Lin28 inside the cells, we generated a soluble Lin28-30Kc19 fusion protein, with 30Kc19 at the C-terminal domain of Lin28. 30Kc19, a silkworm hemolymph-derived protein, was fused due to its cell-penetrating and protein-stabilizing properties. The Lin28-30Kc19 was treated to human dermal fibroblasts (HDFs), in combination with four defined reprogramming factors (Oct4, Sox2, c-Myc, and Klf4). After 14 days of cell culture, we confirmed the generated hiPSCs through AP staining. According to the results, the addition of Lin28-30Kc19 increased the number and size of generated AP-positive hiPSC colonies. Through this research, we anticipate that this recombinant protein would be a valuable material for increasing the efficiency of hiPSC generation and for enhancing the possibility as a substitute of the conventional method.

Tension exerted on cells by magnetic nanoparticles regulates differentiation of human mesenchymal stem cells.

Cells can 'sense' physical cues in the surrounding microenvironment and 'react' by changing their function. Previous studies have focused on regulating the physical properties of the matrix, such as stiffness and topography, thus changing the tension 'felt' by the cell as a result. In this study, by directly applying a quantified magnetic force to the cell, a correlation between differentiation and tension was shown. The magnetic force, quantified by magnetic tweezers, was applied by incorporating magnetotactic bacteria-isolated magnetic nanoparticles (MNPs) in human mesenchymal stem cells. As the applied tension increased, the expression levels of osteogenic differentiation marker genes and proteins were proportionally upregulated. Additionally, the translocation of YAP and RUNX2, deformation of nucleus, and activation of the MAPK signaling pathway were observed in tension-based osteogenic differentiation. Our findings provide a platform for the quantitative control of tension, a key factor in stem cell differentiation, between cells and the matrix using MNPs. Furthermore, these findings improve the understanding of osteogenic differentiation by mechanotransduction.

Cleavage-Responsive Biofactory T Cells Suppress Infectious Diseases-Associated Hypercytokinemia.

Severe infectious diseases, such as coronavirus disease 2019 (COVID-19), can induce hypercytokinemia and multiple organ failure. In spite of the growing demand for peptide therapeutics against infectious diseases, current small molecule-based strategies still require frequent administration due to limited half-life and enzymatic digestion in blood. To overcome this challenge, a strategy to continuously express multi-level therapeutic peptide drugs on the surface of immune cells, is established. Here, chimeric T cells stably expressing therapeutic peptides are presented for treatment of severe infectious diseases. Using lentiviral system, T cells are engineered to express multi-level therapeutic peptides with matrix metallopeptidases- (MMP-) and tumor necrosis factor alpha converting enzyme- (TACE-) responsive cleavage sites on the surface. The enzymatic cleavage releases γ-carboxyglutamic acid of protein C (PC-Gla) domain and thrombin receptor agonist peptide (TRAP), which activate endothelial protein C receptor (EPCR) and protease-activated receptor-1 (PAR-1), respectively. These chimeric T cells prevent vascular damage in tissue-engineered blood vessel and suppress hypercytokinemia and lung tissue damages in vivo, demonstrating promise for use of engineered T cells against sepsis and other infectious-related diseases.

Partially Digested Osteoblast Cell Line-Derived Extracellular Matrix Induces Rapid Mineralization and Osteogenesis.

An extracellular matrix (ECM) utilized as a biomaterial can be obtained from organs of living organisms. Therefore, it has some limitations in its supply because of insufficient organs. Furthermore, therapeutic efficacy of ECMs varies depending on factors such as donor's health condition and age. For this reason, ECMs obtained from a cell line could be a good alternative because they can be produced under a controlled environment with uniform quality. Thus, the purpose of this study was to investigate the potential of the MC3T3-E1 cell line-derived ECM as bone graft. The optimized decellularization process was developed to separate the ECM from MC3T3-E1, osteoblast cell line, using Trypsin-EDTA and Triton X-100. The decellularized ECM was partially digested using pepsin. Also, human bone marrow-derived mesenchymal stem cells induced faster osteogenesis on the ECM-coated surface than on the collagen-coated surface. Partially digested ECM fragments were embedded on the polyethylene glycol scaffold without additional chemical modification or crosslinking. Micro-computed tomography and histological analysis results showed that the ECM in the scaffold promoted actual bone regeneration after in vivo implantation to a mouse calvarial defect model. This study suggests that the bone-specific ECM derived from the cell line can replace the ECM from organs for application in tissue engineering and regenerative medicine.

Lineage Specific Differentiation of Magnetic Nanoparticle-Based Size Controlled Human Embryoid Body.

Human embryonic stem cells (hESCs) possess unique properties in terms of self-renewal and differentiation, which make them particularly well-suited for use in tissue engineering and regenerative medicine. The differentiation of hESCs in the form of human embryoid bodies (hEBs) recapitulates early embryonic development, and hEBs may provide useful insight into the embryological development of humans. Herein, cell-penetrating magnetic nanoparticles (MNPs) were utilized to form hEBs with defined sizes and the differentiation patterns were analyzed. Through intracellular delivery of MNPs into the hESCs, suspended and magnetized hESCs efficiently clustered in to hEBs driven by magnetic pin-based external magnetic forces. The hEB size was controlled by varying the suspended cell numbers that were applied in the magnetic pin system. After 3 days of differentiation in a suspended condition, ectodermal differentiation was observed to have been enhanced in the small hEBs (150 µm in diameter) while endodermal and mesodermal differentiation were enhanced in large hEBs (600 µm in diameter). This indicates that the size of the hEBs plays an important role in the early lineage commitment of hESCs, and MNP-based control of the hEB size would be a novel, useful methodology for lineage-specific hESC differentiation.

Intrinsic Hydrophobic Cairnlike Multilayer Films for Antibacterial Effect with Enhanced Durability.

One important aspect of nanotechnology includes thin films capable of being applied to a wide variety of surfaces. Indispensable functions of films include controlled surface energy, stability, and biocompatibility in physiological systems. In this study, we explored the ancient Asian coating material "lacquer" to enhance the physiological and mechanical stability of nanofilms. Lacquer is extracted from the lacquer tree and its main component called urushiol, which is a small molecule that can produce an extremely strong coating. Taking full advantage of layer-by-layer assembly techniques, we successfully fabricated urushiol-based thin films composed of small molecule/polymer multilayers by controlling their molecular interaction. Unique cairnlike nanostructures in this film, produced by urushiol particles, have advantages of intrinsic hydrophobicity and durability against mechanical stimuli at physiological environment. We demonstrated the stability tests as well as the antimicrobial effects of this film.

Physical Stimuli-Induced Chondrogenic Differentiation of Mesenchymal Stem Cells Using Magnetic Nanoparticles.

Chondrogenic commitments of mesenchymal stem cells (MSCs) require 3D cellular organization. Furthermore, recent progresses in bioreactor technology have contributed to the development of various biophysical stimulation platforms for efficient cartilage tissue formation. Here, an approach is reported to drive 3D cellular organization and enhance chondrogenic commitment of bone-marrow-derived human mesenchymal stem cells (BM-hMSCs) via magnetic nanoparticle (MNP)-mediated physical stimuli. MNPs isolated from Magnetospirillum sp. AMB-1 are endocytosed by the BM-hMSCs in a highly efficient manner. MNPs-incorporated BM-hMSCs are pelleted and then subjected to static magnetic field and/or magnet-derived shear stress. Magnetic-based stimuli enhance level of sulfated glycosaminoglycan (sGAG) and collagen synthesis, and facilitate the chondrogenic differentiation of BM-hMSCs. In addition, both static magnetic field and magnet-derived shear stress applied for the chondrogenic differentiation of BM-hMSCs do not show increament of hypertrophic differentiation. This MNP-mediated physical stimulation platform demonstrates a promising strategy for efficient cartilage tissue engineering.

Controlled surface functionality of magnetic nanoparticles by layer-by-layer assembled nano-films.

Over the past several years, the preparation of functionalized nanoparticles has been aggressively pursued in order to develop desired structures, compositions, and structural order. Among the various nanoparticles, iron oxide magnetic nanoparticles (MNPs) have shown great promise because the material generated using these MNPs can be used in a variety of biomedical applications and possible bioactive functionalities. In this study, we report the development of various functionalized MNPs (F-MNPs) generated using the layer-by-layer (LbL) self-assembly method. To provide broad functional opportunities, we fabricated F-MNP bio-toolbox by using three different materials: synthetic polymers, natural polymers, and carbon materials. Each of these F-MNPs displays distinct properties, such as enhanced thickness or unique morphologies. In an effort to explore their biomedical applications, we generated basic fibroblast growth factor (bFGF)-loaded F-MNPs. The bFGF-loaded F-MNPs exhibited different release mechanisms and loading amounts, depending on the film material and composition order. Moreover, bFGF-loaded F-MNPs displayed higher biocompatibility and possessed superior proliferation properties than the bare MNPs and pure bFGF, respectively. We conclude that by simply optimizing the building materials and the nanoparticle's film composition, MNPs exhibiting various bioactive properties can be generated.

High-throughput generation of spheroids using magnetic nanoparticles for three-dimensional cell culture.

Various attempts have been made to develop three-dimensional (3-D) cell culture methods because 3-D cells mimic the structures and functional properties of real tissue compared with those of monolayer cultures. Here, we report on a highly simple and efficient 3-D spheroid generation method based on a magnetic pin-array system to concentrate magnetic nanoparticle-incorporated cells in a focal direction. This system was comprised only of external magnets and magnetically induced iron pins to generate a concentrated magnetic field for attracting cells in a focused direction. 3-D spheroid generation was achieved simply by adding magnetic nanoparticle-incorporated cells into a well and covering the plate with a magnetic lid. Cell clustering occurred rapidly within 5 min and created more compact cells with time through the focused magnetic force. This system ensured not only reproducible and size-controlled generation of spheroids but also versatile types of spheroids such as random mixed, core-shell, and fused spheroids, providing a very useful tool for various biological applications.

Network of endocardial vessels.

BACKGROUND: Although there have been reports on threadlike structures inside the heart, they have received little attention. We aimed to develop a method for observing such structures and to reveal their ultrastructures. METHODS: An in situ staining method, which uses a series of procedures of 0.2-0.4% trypan blue spraying and washing, was applied to observe threadlike structures on the surfaces of endocardia. The threadlike structures were isolated and observed by using confocal laser scanning microscopy (CLSM) and transmission electron microscopy (TEM). RESULTS: Networks of endocardial vessels (20 µm in thickness) with expansions (40-100 µm in diameter) were visualized; they were movable on the endocardium of the bovine atrium and ventricle. CLSM showed that (1) rod-shaped nuclei were aligned along the longitudinal direction of the endocardial vessel and (2) there were many cells inside the expansion. TEM on the endocardial vessel revealed that (1) there existed multiple lumens (1-7 µm in diameter) and (2) the extracellular matrices mostly consisted of collagen fibers, which were aligned along the longitudinal direction of the endocardial vessel or were locally organized in reticular structures. CONCLUSION: We investigated the endocardial circulatory system in bovine cardiac chambers and its ultrastructures, such as nucleic distributions, microlumens, and collagenous extracellular matrices.