ABSTRACT
Carbon supported intermetallic compound nanoparticles with high activity and stability are promising cathodic catalysts for oxygen reduction reaction in proton-exchange-membrane fuel cells. However, the synthesis of intermetallic catalysts suffers from large diffusion barrier for atom ordering, resulting in low ordering degree and limited performance. We demonstrate a low-melting-point metal doping strategy for the synthesis of highly ordered L10-type M-doped PtCo (M = Ga, Pb, Sb, Cu) intermetallic catalysts. We find that the ordering degree of the M-doped PtCo catalysts increases with the decrease of melting point of M. Theoretic studies reveal that the low-melting-point metal doping can decrease the energy barrier for atom diffusion. The prepared highly ordered Ga-doped PtCo catalyst exhibits a large mass activity of 1.07 A mgPt-1 at 0.9 V in H2-O2 fuel cells and a rated power density of 1.05 W cm-2 in H2-air fuel cells, with a Pt loading of 0.075 mgPt cm-2.
ABSTRACT
Iridium-based electrocatalysts remain the only practical anode catalysts for proton exchange membrane (PEM) water electrolysis, due to their excellent stability under acidic oxygen evolution reaction (OER), but are greatly limited by their high cost and low reserves. Here, we report a nickel-stabilized, ruthenium dioxide (Ni-RuO2) catalyst, a promising alternative to iridium, with high activity and durability in acidic OER for PEM water electrolysis. While pristine RuO2 showed poor acidic OER stability and degraded within a short period of continuous operation, the incorporation of Ni greatly stabilized the RuO2 lattice and extended its durability by more than one order of magnitude. When applied to the anode of a PEM water electrolyser, our Ni-RuO2 catalyst demonstrated >1,000 h stability under a water-splitting current of 200 mA cm-2, suggesting potential for practical applications. Density functional theory studies, coupled with operando differential electrochemical mass spectroscopy analysis, confirmed the adsorbate-evolving mechanism on Ni-RuO2, as well as the critical role of Ni dopants in stabilization of surface Ru and subsurface oxygen for improved OER durability.
ABSTRACT
Supported ordered intermetallic compounds exhibit superior catalytic performance over their disordered alloy counterparts in diverse reactions. But the synthesis of intermetallic compounds catalysts often requires high-temperature annealing that leads to the sintering of metals into larger crystallites. Herein, we report a small molecule-assisted impregnation approach to realize the general synthesis of a family of intermetallic catalysts, consisting of 18 binary platinum intermetallic compounds supported on carbon blacks. The molecular additives containing heteroatoms (that is, O, N, or S) can be coordinated with platinum in impregnation and thermally converted into heteroatom-doped graphene layers in high-temperature annealing, which significantly suppress alloy sintering and insure the formation of small-sized intermetallic catalysts. The prepared optimal PtCo intermetallics as cathodic oxygen-reduction catalysts exhibit a high mass activity of 1.08 A mgPt-1 at 0.9 V in H2-O2 fuel cells and a rated power density of 1.17 W cm-2 in H2-air fuel cells.
ABSTRACT
Platinum-based atomically ordered alloys (i.e., intermetallic compounds) have distinct advantages over disordered solid solution counterparts in boosting the cathodic oxygen-reduction reaction (ORR) in proton-exchange-membrane fuel cells. Nevertheless, the pivotal role of ordering degree of intermetallic catalysts in promoting ORR performance has been ignored heavily so far, probably owing to the lack of synthetic routes for controlling the ordering degree, especially for preparing highly ordered intermetallic catalysts. Herein, a family of intermetallic PtFe catalysts with similar particle size of 3-4 nm but varied ordering degree in a wide range of 10-70% are prepared. After constructing the PtFe/Pt core/shell structure with around 3 Pt-layer skin, a positive correlation between the ordering degree of the intermetallic catalysts and their ORR activity and durability is identified. Notably, the highly ordered PtFe/Pt catalyst exhibits a high mass activity of 0.92 A mgPt -1 at 0.9 ViR-corrected as cathode catalyst in H2 -O2 fuel cell, with only 24% loss after accelerated durability tests. The ordering degree-dependent performance can be ascribed to the compressive strain effect induced by the intermetallic PtFe core with smaller lattice parameters, and the more thermodynamically stable intermetallic structure compared to disordered alloys.
ABSTRACT
Atomically ordered intermetallic alloys with unique electronic and geometrical structures are highly attractive for heterogeneous catalysis and electrocatalysis. However, the formation of intermetallic phases generally requires high-temperature annealing to overcome the kinetic energy barrier of atom ordering, which unfortunately causes high material heterogeneity and thus makes it challenging to identify the exact contribution of ordered structures to the improved performance. Here, we prepared a family of small-sized intermetallic core/shell Pt3M@Pt (M = Mn or Fe) catalysts with varied ordering degree by a high-temperature sulfur-confined method. We identified a strong correlation between the ordering degree of the intermetallic Pt3M core of the catalysts and their electrocatalytic activity for the methanol oxidation reaction. Density functional theory calculations show that the intermetallic Pt3M core induces a compressive strain on the Pt-skin, which weakens the CO* binding, lowers the free energy change from CO* to COOH*, and therefore promotes electrocatalytic methanol oxidation.
ABSTRACT
The influence of temperature (30-45â) and ammonia-nitrogen volume load on the nitrification function and microbial community of activated sludge in an aerobic tank of a sewage treatment plant were investigated under simulated high-temperature stress in the summer. Meanwhile, the bioaugmentation effectiveness of the middle-temperature-enriched nitrifying sludge (with or without acclimation) was evaluated in two biological treatment systems under high-temperature shock. The results showed that the ammonium-nitrogen (NH4+-N) removal efficiency and the nitrifying bacteria content of the aerobic activated sludge at 30-40â were above 90% and up to 4.55% and decreased to 40% and 1.97% at 45â, respectively. To quickly recover the nitrification function of the biological system under high-temperature shock in the summer, the middle-temperature-enriched nitrifying sludge was acclimated at 40â for 61 d and achieved (60±5) mg·(L·h)-1 nitrification activity. Then, its bioaugmentation efficiency was compared with that of the middle-temperature-enriched nitrifying sludge. In the bioaugmentation test, 10% of NH4+-N was removed in the reactor inoculated with 5% (volume fraction) of the acclimated nitrifying sludge, while the reactor needed inoculate with 10% (volume fraction) of the middle-temperature-enriched sludge to achieve the same removal efficiency. The results suggested that middle-temperature-enriched nitrifying sludge, after acclimating at 40â, has a better enhancement effect under a high-temperature shocking load.