A Comparison of the Association of Septal Scar Burden on Responses to LBBAP-CRT and BVP-CRT.

BACKGROUND: Left bundle branch area pacing (LBBAP) is an alternative to biventricular pacing (BVP) for cardiac resynchronization therapy (CRT). However, despite the presence of left bundle branch block, whether cardiac substrate may influence the effect between the 2 strategies is unclear. OBJECTIVES: This study aims to assess the association of septal scar on reverse remodeling and clinical outcomes of LBBAP compared with BVP. METHODS: We analyzed patients with nonischemic cardiomyopathy who had CRT indications undergoing preprocedure cardiac magnetic resonance examination. Changes in left ventricular ejection fraction (LVEF) and echocardiographic response (ER, ≥5% absolute LVEF increase) were assessed at 6 months. The clinical outcome was the composite of all-cause mortality, heart failure hospitalization, or major ventricular arrhythmia. RESULTS: There were 147 patients included (51 LBBAP and 96 BVP). Among patients with low septal scar burden (below median 5.7%, range: 0 to 5.3%), LVEF improvement was higher in the LBBAP than the BVP group (17.5% ± 10.9% vs 12.3% ± 11.8%; P = 0.037), with more than 3-fold increased odds of ER (odds ratio: 4.35; P = 0.033). In high sepal scar subgroups (≥5.7%, range: 5.7% to 65.9%), BVP trended towards higher LVEF improvement (9.2% ± 9.4% vs 6.4% ± 12.4%; P = 0.085). Interaction between septal scar burden and pacing strategy was significant for ER (P = 0.002) and LVEF improvement (P = 0.011) after propensity score adjustment. During median follow-up of 33.7 (Q1-Q3: 19.8 to 42.1) months, the composite clinical outcome occurred in 34.7% (n = 51) of patients. The high-burden subgroups had worse clinical outcomes independent of CRT method. CONCLUSIONS: Remodeling response to LBBAP and BVP among nonischemic cardiomyopathy patients is modified by septal scar burden. High septal scar burden was associated with poor clinical prognosis independent of CRT methods.

Potential Protective Effect of SeleniumEnriched Lactobacillus plantarum on Cadmium-Induced Liver Injury in Mice.

Cadmium (Cd) is a prevalent environmental contaminant that poses a potential hazard to the health of both humans and animals. In this study, biosynthesized selenium-enriched Lactobacillus plantarum and selenium nanoparticles (SeNPs) were developed and evaluated for their protective effects against Cd-induced hepatic injury in mice through oral administration for 4 weeks. Cadmium exposure resulted in severe impairment of liver function, as evidenced by increased levels of serum markers of liver injury and, oxidative stress and significant damage to liver tissue, and a notable decrease in the diversity of the intestinal microbiota. Oral administration of Se-enriched L. plantarum (LS) reduced cadmium accumulation in the liver by 49.5% and, restored other cadmium-induced damage markers to normal levels. A comparison of the effects with those of L. plantarum (L) and SeNPs isolated from LS revealed that LS could more effectively alleviate hepatic oxidative stress and reduce the intrahepatic inflammatory responses of the liver, further protecting against cadmiuminduced liver injury. These findings suggest that the development of LS may be effective at protecting the liver and intestinal tract from cadmium-induced damage.

Integrating Photoelectrochemical Feature on a Hydrovoltaic Chip with High-Salinity Adaption as a Self-Powered Device for Formaldehyde Monitoring.

Alternative energy sources are required due to the decline in fossil fuel resources. Therefore, devices that utilize hydrovoltaic technology and light energy have drawn widespread attention because they are emission-free and solar energy is inexhaustible. However, previous investigations mainly focused on accelerating the water evaporation rate at the electrode interface. Here, a cooperative photoelectrochemical effect on a hydrovoltaic chip is achieved using NH2-MIL-125-modified TiO2 nanotube arrays (NTs). This device demonstrated significantly improved evaporation-triggered electricity generation. Under LED illumination, the open-circuit voltage (VOC) of the NH2-MIL-125/TiO2NTs active layer of the hydrovoltaic chip was enhanced by 90.3% (up to 400.2 mV). Furthermore, the prepared hydrovoltaic chip showed good high-salinity tolerance, maintaining 74.6% of its performance even in 5 M NaCl. By introducing a Schiff-based reaction between the active layer and formaldehyde, a fully integrated flexible sensor was successfully fabricated for formaldehyde monitoring, and a low limit of detection of 5.2 × 10-9 M was achieved. This novel strategy for improving the performance of hydrovoltaic devices offers a completely new general approach to construct self-powered devices for point-of-care sensing.

Homochiral light-sensitive metal-organic framework photoelectrochemical gated transistor for enantioselective discrimination of monosaccharides.

As pure antipodes may differ in biological interactions, pharmacology, and toxicity, discrimination of enantiomers is important in the pharmaceutical and agrochemical industries. Two major challenges in enantiomer determination are transducing and amplifying the distinct chiral-recognition signals. In this study, a light-sensitive organic photoelectrochemical transistor (OPECT) with homochiral character is developed for enantiomer discrimination. Demonstrated with the discrimination of glucose enantiomers, the photoelectrochemically active gate electrode is prepared by integrating Au nanoparticles (AuNPs) and a chiral Cu(II)-metal-organic framework (c-CuMOF) onto TiO2 nanotube arrays (TNT). The captured glucose enantiomers are oxidized to hydrogen peroxide (H2O2) by the oxidase-mimicking AuNPs-loaded c-CuMOF. Based on the confinement effect of the mesopocket structure of the c-CuMOF and the remarkable charge transfer ability of the 1D nanotubular architecture, variations in H2O2 yield are translated into significant changes in OPECT drain currents (ID) by inducing a catalytic precipitation reaction. Variations in ID confer a sensitive discrimination of glucose enantiomers with a limit of detection (LOD) of 0.07 µM for L-Glu and 0.05 µM for D-Glu. This enantiomer-driven gate electrode response strategy not only provides a new route for enantiomer identification, but also helps to understand the origin of the high stereoselectivity in living systems.

Structure-regulated enhanced Raman scattering on a semiconductor to study temperature-influenced enantioselective identification.

Surface-enhanced Raman scattering (SERS) spectroscopy is an effective technique that can reveal molecular structure and molecular interaction details. Semiconductor-based SERS platforms exhibit multifaceted tunability and unique selectivity to target molecules as well as high spectral reproducibility. However, the detection sensitivity of semiconductors is impeded by inferior SERS enhancement. Herein, a surface and interference co-enhanced Raman scattering (SICERS) platform based on corrugated TiO2 nanotube arrays (c-TiO2 NTs) was developed, and the coupling of structural regulation and photo-induced charge transfer (PICT) effectively optimized the SERS performance of the semiconductor substrate. Due to the regularly oscillating optical properties of the c-TiO2 NTs, well-defined interference patterns were generated and the local electric field was significantly increased, which greatly promoted both the electromagnetic mechanism and PICT processes. The c-TiO2 NTs were subsequently applied as a highly sensitive SICERS substrate to investigate the mechanism of temperature influence on enantioselective identification. This identification process is related to the existence of temperature-sensitive hydrogen bonds and π-π interaction. This work demonstrates a simply prepared, low-cost, and sensitive SERS substrate that enables better investigation into molecular identification.

Pore-Forming Toxin-Driven Recovery of Peroxidase-Mimicking Activity in Biomass Channels for Label-Free Electrochemical Bacteria Sensing.

The development of sensitive, selective, and rapid methods to detect bacteria in complex media is essential to ensuring human health. Virulence factors, particularly pore-forming toxins (PFTs) secreted by pathogenic bacteria, play a crucial role in bacterial diseases and serve as indicators of disease severity. In this study, a nanochannel-based label-free electrochemical sensing platform was developed for the detection of specific pathogenic bacteria based on their secreted PFTs. In this design, wood substrate channels were functionalized with a Fe-based metal-organic framework (FeMOF) and then protected with a layer of phosphatidylcholine (PC)-based phospholipid membrane (PM) that serves as a peroxidase mimetic and a channel gatekeeper, respectively. Using Staphylococcus aureus (S. aureus) as the model bacteria, the PC-specific PFTs secreted by S. aureus perforate the PM layer. Now exposed to the FeMOF, uncharged 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) molecules in the electrolyte undergo oxidation to cationic products (ABTS•+). The measured transmembrane ionic current indicates the presence of S. aureus and methicillin-resistant S. aureus (MRSA) with a low detection limit of 3 cfu mL-1. Besides excellent specificity, this sensing approach exhibits satisfactory performance for the detection of target bacteria in the complex media of food.

Evaluation of the effectiveness and safety of sequential vaccination with inactivated SARS-CoV-2 vaccine and Ad5-nCoV booster in pediatric liver transplant recipients.

Amidst the COVID-19 pandemic, uncertainty persists among caregivers regarding the vaccination of pediatric liver transplant recipients (PLTRs). This study evaluates the immunogenicity and safety of COVID-19 vaccination in this vulnerable population. A cohort of 30 PLTRs underwent sequential vaccinations with an inactivated SARS-CoV-2 vaccine followed by an Ad5-nCoV booster. We collected and analyzed blood samples pre-vaccination and four weeks post-vaccination to quantify antibody and IGRA (IFN-γ Release Assay) levels. We also documented any adverse reactions occurring within seven days post-vaccination and monitored participants for infections over six months post-vaccination, culminating in a comprehensive statistical analysis. The Ad5-nCoV booster substantially elevated IgG (T1: 18.01, 20%; T2: 66.61, 55%) and nAb (T1: 119.29, 8%; T2: 3799.75, 80%) levels, as well as T-cell responses, in comparison to the initial dose. The first dose was associated with some common adverse reactions, such as injection site pain (13.3%) and fever (16.6%), but a low rate of systemic reactions (16.0%). There was no significant difference in Omicron infection rates or RTPCR conversion times between vaccinated and unvaccinated groups. Notably, following Omicron infection, vaccinated individuals exhibited significantly higher SARS-CoV-2 IgG and nAb titers (average IgG: 231.21 vs. 62.09 S/CO, p = 0.0003; nAb: 5246.11 vs. 2592.07 IU/mL, p = 0.0002). The use of inactivated vaccines followed by an Ad5-nCoV booster in PLTRs is generally safe and elicits a robust humoral response, albeit with limited T-cell responses.

Atomic-Level Tailoring of the Electronic Metal-Support Interaction Between Pt-Co3O4 Interfaces for High Hydrogen Evolution Performance.

Atomic-level modulation of the metal-oxide interface is considered an effective approach to optimize the electronic structure and catalytic activity of metal catalysts but remains highly challenging. Here, we employ the atomic layer deposition (ALD) technique together with a heteroatom doping strategy to effectively tailor the electronic metal-support interaction (EMSI) at the metal-oxide interface on the atomic level, thereby achieving high hydrogen evolution performance and Pt utilization. Theoretical calculations reveal that the doping of N atoms in Co3O4 significantly adjusts the EMSI between Pt-Co3O4 interfaces and, consequently, alters the d-band center of Pt and optimizes the adsorption/desorption of reaction intermediates. This work sheds light on the atomic-level regulation and mechanistic understanding of the EMSI in metal-oxide, while providing guidance for the development of advanced EMSI electrocatalysts for various future energy applications.

CMR feature tracking-based left atrial mechanics predicts response to cardiac resynchronization therapy and adverse outcomes.

BACKGROUND: Cardiac resynchronization therapy (CRT) is an established therapy for advanced heart failure (HF) with prolonged QRS duration. However, 30% of patients have shown no benefit from the treatment. OBJECTIVE: This study aimed to examine the value of left atrial (LA) mechanics by cardiac magnetic resonance (CMR) to predict response to CRT and clinical outcomes. METHODS: A total of 163 CRT recipients with preimplantation CMR examination were retrospectively recruited. CMR feature tracking was used to evaluate LA size and function. The end points include (1) improvement of at least 5% in left ventricular ejection fraction combined with a reduction of at least 1 New York Heart Association functional class at 6-month follow-up and (2) any all-cause death or HF hospitalization during follow-up. RESULTS: Overall, 82 (50.3%) were CRT responders. CRT nonresponders had larger LA and worse LA reservoir and booster pump function than did responders (P < .001 for all). LA structural (maximum volume index < 47 mL/m2) and functional (booster pump strain > 8.5%) criteria were incremental to traditional indicators in detecting CRT response (χ2, 40.83 vs 9.98; P < .001). During follow-up (median 41 months), survival free from death or HF hospitalization increased with the number of positive LA criteria (log-rank, P < .001). After adjustment for clinical confounders, the absence of the 2 criteria remained associated with a considerably increased risk of death or HF hospitalization (adjusted hazard ratio 6.2; 95% confidence interval 2.15-17.88; P = .001). CONCLUSION: The preprocedure LA mechanics evaluated using CMR may be useful to predict response to CRT and improve risk stratification in CRT recipients.

The Challenges and Opportunities for TiO2 Nanostructures in Gas Sensing.

Chemiresistive gas sensors based on metal oxides have been widely applied in industrial monitoring, medical diagnosis, environmental pollutant detection, and food safety. To further enhance the gas sensing performance, researchers have worked to modify the structure and function of the material so that it can adapt to different gas types and environmental conditions. Among the numerous gas-sensitive materials, n-type TiO2 semiconductors are a focus of attention for their high stability, excellent biosafety, controllable carrier concentration, and low manufacturing cost. This Perspective first introduces the sensing mechanism of TiO2 nanostructures and composite TiO2-based nanomaterials and then analyzes the relationship between their gas-sensitive properties and their structure and composition, focusing also on technical issues such as doping, heterojunctions, and functional applications. The applications and challenges of TiO2-based nanostructured gas sensors in food safety, medical diagnosis, environmental detection, and other fields are also summarized in detail. Finally, in the context of their practical application challenges, future development technologies and new sensing concepts are explored, providing new ideas and directions for the development of multifunctional intelligent gas sensors in various application fields.

Customizing Wettability of Defect-Rich CeO2/TiO2 Nanotube Arrays for Humidity-Resistant, Ultrafast, and Sensitive Ammonia Response.

In all their applications, gas sensors should satisfy several requirements, including low cost, reduced energy consumption, fast response/recovery, high sensitivity, and reliability in a broad humidity range. Unfortunately, the fast response/recovery and sensing reliability under high humidity conditions are often still missing, especially those working at room temperature. In this study, a humidity-resistant gas sensor with an ultrafast response/recovery rate was designed by integrating a defect-rich semiconducting sensing interface and a self-assembled monolayer (SAM) with controllable wettability. As a proof-of-concept application, ammonia (NH3), one of the atmospheric and indoor pollutants, was selected as the target gas. The decoration of interconnected defective CeO2 nanowires on spaced TiO2 nanotube arrays (NTAs) provided superior NH3 sensing performances. Moreover, we showed that manipulating the functional end group of SAMs is an efficient and simple method to adjust the wettability, by which 86% sensitivity retention with an ultrafast response (within 5 s) and a low limit of detection (45 ppb) were achieved even at 75% relative humidity and room temperature. This work provides a new route toward the comprehensive design and application of metal oxide semiconductors for trace gas monitoring under harsh conditions, such as those of agricultural, environmental, and industrial fields.