ABSTRACT
Fused filament fabrication (FFF) represents a straightforward additive manufacturing technique applied in the medical sector for personalized patient treatment. However, frequently processed biopolymers lack sufficient thermal stability to be used as auxiliary devices such as surgical guides. The aim of this study was to evaluate the dimensional accuracy of experimental biocopolyester blends with improved thermal characteristics after printing, annealing and sterilization. A total of 160 square specimens and 40 surgical guides for oral implant placement were printed. One subgroup of each material (n = 10) underwent thermal annealing before both subgroups were subjected to steam sterilization (134 °C; 5 min). Specimens were digitized and the deviation from the original file was calculated. The thermal behavior was analyzed using differential scanning calorimetry and thermogravimetric analysis. A one-way ANOVA and t-tests were applied for statistical analyses (p < 0.05). All biocopolyester blends showed warpage during steam sterilization. However, the material modification with mineral fillers (21-32 wt%) and nucleating agents in combination with thermal annealing showed a significantly reduced warpage of printed square specimens. Geometry of the printing object seemed to affect dimensional accuracy, as printed surgical guides showed less distortion between the groups. In summary, biocopolyesters did benefit from fillers and annealing to improve their dimensional stability.
Subject(s)
Printing, Three-Dimensional , Steam , Humans , SterilizationABSTRACT
Exposure to beryllium (Be) can lead to lung pathologies, such as chronic beryllium disease (CBD). This occupational illness has been more prevalent among dental technicians compared to the non-exposed population. Although most manufacturers state that dental materials are Be-free, this prevalence raises the question of whether the materials are completely devoid of Be-traces. Thus, the objective of the present study was to analyze the elemental composition, with emphasis on Be, of a wide range of commercially available dental materials frequently used by dental laboratories. Samples of 32 different materials were collected and analyzed using inductively coupled plasma-optical emission spectrometry (ICP-OES) and X-ray fluorescence spectroscopy. The results showed that the Be content was below the limit of quantification in all included samples (< 0.00005 mass-%). Therefore, it can be concluded that possible traces of Be were below clinical relevance in dental materials. Exposure of dental technicians to alternative Be sources should be further evaluated.
Subject(s)
Beryllium , Occupational Exposure , Beryllium/analysis , Spectrometry, X-Ray Emission/methods , Dental Materials , Occupational Exposure/analysisABSTRACT
PURPOSE: Based on the excellent long-term data, dental implants made of titanium are considered the international implantological standard for replacing missing teeth. However, ceramic implants made of zirconia (ZrO2) have experienced a renaissance in the last 15 years due to constant innovations in materials and products, with material properties and soft tissue- and osseointegration behavior comparable to those of titanium. However, one limitation concerning ceramic implants is the lack of reliable long-term data, especially in the case of two-piece implant systems. As there is an increasing demand for ceramic implants from practitioners and patients, the German Society for Implantology (DGI) has decided to develop a guideline on the use of dental ceramic implants at the highest available evidence level with the involvement of experts in this field. METHODS: Statements and recommendations were prepared after conducting a systematic literature search and an independent assessment process involving the relevant clinical literature from 2008 to 2021. The adopted recommendations and statements are summarized in this guideline. RESULTS AND CONCLUSIONS: It confirms the feasible use of one-piece zirconia implants as an addendum/alternative to titanium implants. No final conclusion regarding the application of two-piece ceramic implant systems could be drawn on the basis of the existing data, thus its use can only be recommended after the patient has been informed in detail about the lack of long-term clinical data.
Subject(s)
Dental Implants , Ceramics , Dental Materials , Humans , Titanium , ZirconiumABSTRACT
To determine the survival rate and marginal bone loss (MBL) of zirconia dental implants restored with single crowns or fixed dental prostheses. An electronic search was conducted up to November 2015 (without any restriction regarding the publication time) through the databases MEDLINE (PubMed), Cochrane Library, and EMBASE to identify randomized controlled clinical trials and prospective clinical trials including >15 patients. Primary outcomes were survival rate and MBL. Furthermore, the influence of several covariates on MBL was evaluated. Qualitative assessment and statistical analyses were performed. This review was conducted according to preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines for systematic reviews. With the applied search strategy, 4,196 titles could be identified. After a screening procedure, 2 randomized controlled clinical trials and 7 prospective clinical trials remained for analyses. In these trials, a total of 326 patients received 398 implants. The follow-up ranged from 12 to 60 mo. Implant loss was mostly reported within the first year, especially within the healing period. Thereafter, nearly constant survival curves could be observed. Therefore, separate meta-analyses were performed for the first and subsequent years, resulting in an implant survival rate of 95.6% (95% confidence interval: 93.3% to 97.9%) after 12 mo and, thereafter, an expected decrease of 0.05% per year (0.25% after 5 y). Additionally, a meta-analysis was conducted for the mean MBL after 12 mo, resulting in 0.79 mm (95% confidence interval: 0.73 to 0.86 mm). Implant bulk material and design, restoration type, and the application of minor augmentation procedures during surgery, as well as the modes of temporization and loading, had no statistically significant influence on MBL. The short-term cumulative survival rates and the MBL of zirconia implants in the presented systematic review are promising. However, additional data are still needed to confirm the long-term predictability of these implants.
Subject(s)
Dental Implants , Zirconium/therapeutic use , Dental Implants/adverse effects , Dental Prosthesis, Implant-Supported/adverse effects , Dental Prosthesis, Implant-Supported/methods , Dental Restoration Failure , Humans , Treatment Outcome , Zirconium/adverse effectsABSTRACT
The objective of this study was to determine the clinical, radiographic, and patient-reported outcomes of a 1-piece alumina-toughened zirconia implant restored with single crowns (SCs) or 3-unit fixed dental prostheses (FDPs) after 3 y of observation. Forty patients received 53 implants, placed in a 1-stage operation with immediate temporization. Finally, 50 implants were restored with 24 SCs and 13 FDPs. To evaluate peri-implant bone loss, standardized radiographs were taken at implant insertion, at final restoration delivery, and after 1 and 3 y. Additionally, several soft tissue parameters and patient-reported outcome measures were evaluated. Linear mixed models with random intercept for each patient and patients as clusters were used to compare subgroups. Three patients did not receive a SC due to early implant loss, and 1 patient died. As a result, 36 patients with 49 implants were followed-up for 3 y, giving a cumulative survival rate of 94.2%. The average marginal bone loss amounted to 0.79 mm (SCs, 0.47 mm; FDPs, 1.07 mm; P < 0.001). After the delivery of the final prosthetic restoration, further bone loss was not statistically significant (0.09 mm; P = 0.700). Probing depth, clinical attachment level, and modified bleeding index increased significantly at the implant sites, whereas gingival recession decreased significantly. Compared with the pretreatment questionnaires, the patient-reported outcome measures showed a permanently improved perception of function, aesthetics, sense, speech and self-esteem. The survival rate of the investigated ceramic implant system seems to be comparable to reported survival rates of titanium implants when immediately restored. The recorded parameters suggest its potential for clinical utilization.