ABSTRACT
Phosphate-loaded industrial wastewaters have resulted in numerous environmental issues that have hard hit the Gulf of Gabes-Tunisia, making the environmental protection one of the most compelling priorities. Consequently, this study aimed first to compare the amounts of phosphate adsorbed by two types of Tunisian activated clays. The second goal was to assess and optimize the phosphate removal efficiency of these clays, using Box-Behnken design (BBD) under response surface methodology. Results showed that the highest adsorption amounts of 130.16 mg g-1 , 125.42 mg g-1 were yielded for Jebel Haidoudi clay and Douiret clay, respectively. These values demanded an initial phosphate concentration of 300 mg L-1 , a contact time of 5 h, and a pH of 2). Thus, kinetic and isotherm studies of phosphate elimination from synthetic solutions demonstrated that for both activated clays, the pseudo-second-order and Langmuir equation fitted very well the experimental data, respectively. These results indicate that phosphate adsorption might be mainly a chimisorption phenomenon and a monolayer process. All these findings confirmed that both activated clays could be considered as a competent, cost-effective, efficient and ecological alternative for the elimination of phosphate from industrial wastewaters. PRACTITIONER POINTS: Activated clay could be adopted as an efficient and cost-effective adsorbent. The optimum conditions were nominated as 300 mg L-1 of initial phosphate concentration, 5 h contact times and pH = 2. The probable uptake mechanism of phosphate followed predominantly the acid-base interaction and hydrogen bond.
Subject(s)
Wastewater , Water Pollutants, Chemical , Clay , Phosphates/chemistry , Research Design , Water Pollutants, Chemical/chemistry , Hydrogen-Ion Concentration , Adsorption , KineticsABSTRACT
Many of therapeutic treatments in spas are concentrated on mud therapy. Clays are included in the formulation of thermal mud as vehicles of the mineral medicinal water. To be suitable for therapeutic use, some mineralogical, rheological and thermal properties should be respected in order to be topically applied. Our objective is to explore the suitability of three Tunisian commercial green clays traditionally used as facial and body masks by women in the region of Douiret (CD), Tozeur (CT) and Korbous (CK) in terms of their physicochemical structure chemical composition, heavy metals risk assessment, thermal properties, plasticity, rheology and their potential application as peloid with distilled and sodium chloride-rich sulfated thermal waters from hot spring in the region of hammam Lif and Korbous and sea waters. The mineralogy of samples (clay fraction and associated minerals) was determined by X-ray powder diffraction and FT-IR analysis, and the chemical composition was obtained by ICP. The main clay fraction of the samples was smectite and illite with significant amount of kaolinite. Regarding their mineralogical properties, the samples with a high amount of smectite fraction are more suitable for use in Tunisian spas and for the application as peloids. The thermal analyses of clay powders shows a specific heat value comparable to those use used in spas. Also the muds showed a low cooling rate which is necessary for therapeutic use. Rheological properties of peloids prove their thixotropic characteristics.
Subject(s)
Mud Therapy , Clay , Humans , Rheology , Seawater , Spectroscopy, Fourier Transform InfraredABSTRACT
Magnetic hydrogels (ferrogels) are soft materials with a wide range of applications, especially in biomedicine because (i) they can be provided with the required biocompatibility; (ii) their heterogeneous structure allows their use as scaffolds for tissue engineering; (iii) their mechanical properties can be modified by changing different design parameters or by the action of magnetic fields. These characteristics confer them unique properties for acting as patterns that mimic the architecture of biological systems. In addition, and (iv) given their high porosity and aqueous content, ferrogels can be loaded with drugs and guided towards specific targets for local (non-systemic) pharmaceutical treatments. The ferrogels prepared in this work contain magnetic particles obtained by precipitation of magnetite nanoparticles onto the porous surface of bentonite platelets. Then, the particles were functionalized by adsorption of alginate molecules and dispersed in an aqueous solution of sodium alginate. Finally, the gelation was promoted by cross-linking the alginate molecules with Ca2+ ions. The viscoelastic properties of the ferrogels were measured in the absence/presence of external magnetic fields, showing that these ferrogels exhibited a strong enough magnetorheological effect. This behaviour is explained considering the field-induced strengthening of the heterogeneous (particle-polymer) network generated inside the ferrogel. This article is part of the theme issue 'Patterns in soft and biological matters'.
ABSTRACT
BACKGROUND: Bentonite is a natural clay composed mainly of montmorillonite with other associated minerals such as feldspar, calcite and quartz. Owing to its high cation exchange, large surface area and ability to form thixotropic gels with water and to absorb large quantities of gas, it presents a large medicinal application. OBJECTIVE: This review focuses on the promising potential of bentonite clays for biomaterial design and for therapeutic purposes. METHODS: PubMed, ACS publications and Elsevier were searched for relevant papers. We have also evaluated the references of some pertinent articles. RESULTS: Healing properties of bentonite are derived from the crystalline structure of the smectite group, which is composed of two octahedral alumina sheets localized between two tetrahedral silica sheets. This structure is behind the ability to intercalate cationic bioactive agents and undergoes interaction with various toxic species and exchanging in return species such as Fe3+, Cu2+, Al3+ Ca2+ or Na+, presenting antibacterial activity and providing essential minerals to the body. Furthermore, due to to its layered structure, bentonite has wide application for the design of biomaterials providing, thus, the stability of bioactive agents and preventing them from aggregation. CONCLUSION: Numerous publications have cited bentonite extensive applications as an alternative and complementary treatment for numerous health conditions as a detoxifying agent and for the preparation of several bionanocomposites.
Subject(s)
Bentonite/pharmacology , Biocompatible Materials , Clay , Cations , WaterABSTRACT
An expeditious synthesis of a wide range of phenanthro[9,10-b]thiophene derivatives, which are a class of polyaromatic hydrocarbon (PAH) containing a sulfur atom, is reported. The synthetic scheme involves only two operations from commercially available thiophenes, 2-bromobenzenesulfonyl chlorides and aryl bromides. In the first step, palladium-catalyzed desulfitative arylation using 2-bromobenzenesulfonyl chlorides allows the synthesis of thiophene derivatives, which are substituted at the C4 position by an aryl group containing an ortho-bromo substituent. Then, a palladium-catalyzed one-pot cascade intermolecular C5-arylation of thiophene using aryl bromides followed by intramolecular arylation led to the corresponding phenanthro[9,10-b]thiophenes in a single operation. In addition, PAHs containing two or three sulfur atoms, as well as both sulfur and nitrogen atoms, were also designed by this strategy.
ABSTRACT
Three natural clayey soils from Tunisia were studied to assess their suitability for use as a liner for an acid waste disposal site. An investigation of the effect of the mineral composition and mechanical compaction on the hydraulic conductivity and fluoride and phosphate removal of three different soils is presented. The hydraulic conductivity of these three natural soils are 8.5 × 10(-10), 2.08 × 10(-9) and 6.8 × 10(-10)m/s for soil-1, soil-2 and soil-3, respectively. Soil specimens were compacted under various compaction strains in order to obtain three wet densities (1850, 1950 and 2050 kg/m(3)). In this condition, the hydraulic conductivity (k) was reduced with increasing density of sample for all soils. The test results of hydraulic conductivity at long-term (>200 days) using acidic waste solution (pH=2.7, charged with fluoride and phosphate ions) shows a decrease in k with time only for natural soil-1 and soil-2. However, the specimens of soil-2 compressed to the two highest densities (1950 and 2050 kg/m(3)) are cracked after 60 and 20 days, respectively, of hydraulic conductivity testing. This damage is the result of a continued increase in the internal stress due to the swelling and to the effect of aggressive wastewater. The analysis of anions shows that the retention of fluoride is higher compared to phosphate and soil-1 has the highest sorption capacity.
Subject(s)
Aluminum Silicates/analysis , Soil/analysis , Waste Management , Carbon/analysis , Chlorine/analysis , Clay , Ferrous Compounds/analysis , Metals, Heavy/analysis , Sulfur/analysisABSTRACT
Phosphate ions are usually considered to be responsible for the algal bloom in receiving water bodies and aesthetic problems in water. From the environmental point of view, the management of such contaminant and valuable resource is very important. The present work deals with the removal of phosphate ions from aqueous solutions using kaolinitic and smectic clay minerals and synthetic zeolite as adsorbent. The pH effect and adsorption kinetic were studied. It was found that phosphate could be efficiently removed at acidic pH (between 4 and 6) and the second order model of kinetics is more adopted for all samples. The isotherms of adsorption of phosphate ions by the two clays and the zeolite samples show that the zeolite has the highest rate of uptake (52.9 mg P/g). Equilibrium data were well fitted with Langmuir and Freundlich isotherm.