Ingenious Architecture and Coloration Generation in Enamel of Rodent Teeth.

Teeth exemplify architectures comprising an interplay of inorganic and organic constituents, resulting in sophisticated natural composites. Rodents (Rodentia) showcase extraordinary adaptations, with their continuously growing incisors surpassing human teeth in functional and structural optimizations. In this study, employing state-of-the-art direct atomic-scale imaging and nanoscale spectroscopies, we present compelling evidence that the release of material from ameloblasts and the subsequent formation of iron-rich enamel and surface layers in the constantly growing incisors of rodents are complex orchestrated processes, intricately regulated and independent of environmental factors. The synergistic fusion of three-dimensional tomography and imaging techniques of etched rodent́s enamel unveils a direct correlation between the presence of pockets infused with ferrihydrite-like material and the acid resistant properties exhibited by the iron-rich enamel, fortifying it as an efficient protective shield. Moreover, observations using optical microscopy shed light on the role of iron-rich enamel as a microstructural element that acts as a path for color transmission, although the native color remains indistinguishable from that of regular enamel, challenging the prevailing paradigms. The redefinition of "pigmented enamel" to encompass ferrihydrite-like infusion in rodent incisors reshapes our perception of incisor microstructure and color generation. The functional significance of acid-resistant iron-rich enamel and the understanding of the underlying coloration mechanism in rodent incisors have far-reaching implications for human health, development of potentially groundbreaking dental materials, and restorative dentistry. These findings enable the creation of an entirely different class of dental biomaterials with enhanced properties, inspired by the ingenious designs found in nature.

Controlled Formation of Nanoribbons and Their Heterostructures via Assembly of Mass-Selected Inorganic Ions.

Control of nanomaterial dimensions with atomic precision through synthetic methods is essential to understanding and engineering of nanomaterials. For single-layer inorganic materials, size and shape controls have been achieved by self-assembly and surface-catalyzed reactions of building blocks deposited at a surface. However, the scope of nanostructures accessible by such approach is restricted by the limited choice of building blocks that can be thermally evaporated onto surfaces, such as atoms or thermostable molecules. Herein this limitation is bypassed by using mass-selected molecular ions obtained via electrospray ionization as building blocks to synthesize nanostructures that are inaccessible by conventional evaporation methods. As the first example, micron-scale production of MoS2 and WS2 nanoribbons and their heterostructures on graphene are shown by the self-assembly of asymmetrically shaped building blocks obtained from the electrospray. It is expected that judicious use of electrospray-generated building blocks would unlock access to previously inaccessible inorganic nanostructures.

Preparation of High-Quality Samples for MEMS-Based In-Situ (S)TEM Experiments.

A novel focused ion beam (FIB)-based methodology for the preparation of clean and artifact-free specimens on micro-electro-mechanical-system (MEMS)-based chips for in-situ electrical and electro-thermal experiments in a (scanning) transmission electron microscope ((S)TEM) is introduced. Owing to an alternative geometry, the lamellae are attached to a MEMS-based chip directly after the lift-out procedure and afterward further treated or thinned to electron transparency. The quality of produced lamellae on a chip resembles the quality of a classical FIB-prepared sample that is here demonstrated by high-resolution STEM imaging and analytical techniques. Various sample preparation parameters and the performance of in-situ prepared samples have been evaluated through electrical-biasing experiments.

Multi-scale characterization of Developmental Defects of Enamel and their clinical significance for diagnosis and treatment.

Developmental Defects of Enamel (DDE) such as Dental Fluorosis (DF) and Molar Incisor Hypomineralization (MIH) are a major public health problem. Their clinical aspects are extremely variable, challenging their early and specific diagnosis and hindering progresses in restorative treatments. Here, a combination of macro-, micro- and nano-scale structural and chemical methods, including, among others, Atom Probe Tomography recently applied on tooth enamel, were used to study and compare MIH, DF and healthy teeth from 89 patients. Globally, we show that DF is characterized by an homogenous loss of mineral content and crystallinity mainly disrupting outside layer of enamel, whereas MIH is associated with localized defects in the depth of enamel where crystalline mineral particles are embedded in an organic phase. Only minor differences in elemental composition of the mineral phase could be detected at the nanoscale such as increased F and Fe content in both severe DDE. We demonstrate that an improved digital color measurement of clinical relevance can discriminate between DF and MIH lesions, both in mild and severe forms. Such discriminating ability was discussed in the light of enamel composition and structure, especially its microstructure, organics presence and metal content (Fe, Zn). Our results offer additional insights on DDE characterization and pathogenesis, highlight the potentiality of colorimetric measurements in their clinical diagnosis and provide leads to improve the performance of minimally invasive restorative strategies. STATEMENT OF SIGNIFICANCE: Developmental Defects of Enamel (DDE) are associated to caries and tooth loose affecting billions of people worldwide. Their precise characterization for adapted minimally invasive care with optimized materials is highly expected. Here In this study, first we propose the use of color parameters measured by a spectrophotometer as a means of differential clinical diagnosis. Second, we have used state-of-the-art techniques to systematically characterize the structure, chemical composition and mechanical optical properties of dental enamel teeth affected by two major DDE, Dental Fluorosis (DF) or Molar Incisor Hypomineralization (MIH). We evidence specific enamel structural and optical features for DF and MIH while chemical modifications of the mineral nanocrystals were mostly correlated with lesion severity. Our results pave the way of the concept of personalized dentistry. In the light of our results, we propose a new means of clinical diagnosis for an adapted and improved restoration protocol for these patients.

Synthesis, Characterization, and Electronic Properties of ZnO/ZnS Core/Shell Nanostructures Investigated Using a Multidisciplinary Approach.

ZnO/ZnS core/shell nanostructures, which are studied for diverse possible applications, ranging from semiconductors, photovoltaics, and light-emitting diodes (LED), to solar cells, infrared detectors, and thermoelectrics, were synthesized and characterized by XRD, HR-(S)TEM, and analytical TEM (EDX and EELS). Moreover, band-gap measurements of the ZnO/ZnS core/shell nanostructures have been performed using UV/Vis DRS. The experimental results were combined with theoretical modeling of ZnO/ZnS (hetero)structures and band structure calculations for ZnO/ZnS systems, yielding more insights into the properties of the nanoparticles. The ab initio calculations were performed using hybrid PBE0 and HSE06 functionals. The synthesized and characterized ZnO/ZnS core/shell materials show a unique three-phase composition, where the ZnO phase is dominant in the core region and, interestingly, the auxiliary ZnS compound occurs in two phases as wurtzite and sphalerite in the shell region. Moreover, theoretical ab initio calculations show advanced semiconducting properties and possible band-gap tuning in such ZnO/ZnS structures.

Metal-Organic Framework-Derived Nanoconfinements of CoF2 and Mixed-Conducting Wiring for High-Performance Metal Fluoride-Lithium Battery.

Metal fluoride (MF) conversion cathodes theoretically show higher gravimetric and volumetric capacities than Ni- or Co-based intercalation oxide cathodes, which makes metal fluoride-lithium batteries promising candidates for next-generation high-energy-density batteries. However, their high-energy characteristics are clouded by low-capacity utilization, large voltage hysteresis, and poor cycling stability of transition MF cathodes. A variety of reasons is responsible for this: poor reaction kinetics, low conductivities, unstable MF/electrolyte interfaces and dissolution of active species upon cycling. Herein, we combine the synthesis of the metal-organic-framework (MOF) with the low-temperature fluorination to prepare MOF-shaped CoF2@C nanocomposites that exhibit confinement of the CoF2 nanoparticles and efficient mixed-conducting wiring in the produced architecture. The ultrasmall CoF2 nanoparticles (5-20 nm on average) are uniformly covered by graphitic carbon walls and embedded in the porous carbon framework. Within the CoF2@C nanocomposite, the cross-linked carbon wall and interconnected nanopores serve as electron- and ion-conducting pathways, respectively, enabling a highly reversible conversion reaction of CoF2. As a result, the produced CoF2@C composite cathodes successfully restrain the above-mentioned challenges and demonstrate high-capacity utilization of ∼500 mAh g-1 at 0.2C, good rate capability (up to 2C), and long-term cycle stability over 400 cycles. Overall, the presented study not only reports on a simple composite design to achieve high-energy characteristics in CoF2-Li batteries but also may provide a general solution for many other metal fluoride-lithium batteries.

An optimized TEM specimen preparation method of quantum nanostructures.

Electron transparent TEM lamella with unaltered microstructure and chemistry is the prerequisite for successful TEM explorations. Currently, TEM specimen preparation of quantum nanostructures, such as quantum dots (QDs), remains a challenge. In this work, we optimize the sample-preparation routine for achieving high-quality TEM specimens consisting of SrRuO3 (SRO) QDs grown on SrTiO3 (STO) substrates. We demonstrate that a combination of ion-beam-milling techniques can produce higher-quality specimens of quantum nanostructures compared to TEM specimens prepared by a combination of tripod polishing followed by Ar+ ion milling. In the proposed method, simultaneous imaging in a focused ion-beam device enables accurate positioning of the QD regions and assures the presence of dots in the thin lamella by cutting the sample inclined by 5° relative to the dots array. Furthermore, the preparation of TEM lamellae with several large electron-transparent regions that are separated by thicker walls effectively reduces the bending of the specimen and offers broad thin areas. The final use of a NanoMill efficiently removes the amorphous layer without introducing any additional damage.

Probing Charge Accumulation at SrMnO3/SrTiO3 Heterointerfaces via Advanced Electron Microscopy and Spectroscopy.

The last three decades have seen a growing trend toward studying the interfacial phenomena in complex oxide heterostructures. Of particular concern is the charge distribution at interfaces, which is a crucial factor in controlling the interface transport behavior. However, the study of the charge distribution is very challenging due to its small length scale and the intricate structure and chemistry at interfaces. Furthermore, the underlying origin of the interfacial charge distribution has been rarely studied in-depth and is still poorly understood. Here, by a combination of aberration-corrected scanning transmission electron microscopy (STEM) and spectroscopy techniques, we identify the charge accumulation in the SrMnO3 (SMO) side of SrMnO3/SrTiO3 heterointerfaces and find that the charge density attains the maximum of 0.13 ± 0.07 e-/unit cell (uc) at the first SMO monolayer. Based on quantitative atomic-scale STEM analyses and first-principle calculations, we explore the origin of interfacial charge accumulation in terms of epitaxial strain-favored oxygen vacancies, cationic interdiffusion, interfacial charge transfer, and space-charge effects. This study, therefore, provides a comprehensive description of the charge distribution and related mechanisms at the SMO/STO heterointerfaces, which is beneficial for the functionality manipulation via charge engineering at interfaces.

Structural, Electronic and Magnetic Properties of a Few Nanometer-Thick Superconducting NdBa2Cu3O7 Films.

Epitaxial films of high critical temperature ( T c ) cuprate superconductors preserve their transport properties even when their thickness is reduced to a few nanometers. However, when approaching the single crystalline unit cell (u.c.) of thickness, T c decreases and eventually, superconductivity is lost. Strain originating from the mismatch with the substrate, electronic reconstruction at the interface and alteration of the chemical composition and of doping can be the cause of such changes. Here, we use resonant inelastic x-ray scattering at the Cu L 3 edge to study the crystal field and spin excitations of NdBa 2 Cu 3 O 7 - x ultrathin films grown on SrTiO 3 , comparing 1, 2 and 80 u.c.-thick samples. We find that even at extremely low thicknesses, the strength of the in-plane superexchange interaction is mostly preserved, with just a slight decrease in the 1 u.c. with respect to the 80 u.c.-thick sample. We also observe spectroscopic signatures for a decrease of the hole-doping at low thickness, consistent with the expansion of the c-axis lattice parameter and oxygen deficiency in the chains of the first unit cell, determined by high-resolution transmission microscopy and x-ray diffraction.

Enhanced Pseudo-Capacitive Contributions to High-Performance Sodium Storage in TiO2/C Nanofibers via Double Effects of Sulfur Modification.

Pseudo-capacitive mechanisms can provide higher energy densities than electrical double-layer capacitors while being faster than bulk storage mechanisms. Usually, they suffer from low intrinsic electronic and ion conductivities of the active materials. Here, taking advantage of the combination of TiS2 decoration, sulfur doping, and a nanometer-sized structure, as-spun TiO2/C nanofiber composites are developed that enable rapid transport of sodium ions and electrons, and exhibit enhanced pseudo-capacitively dominated capacities. At a scan rate of 0.5 mV s-1, a high pseudo-capacitive contribution (76% of the total storage) is obtained for the S-doped TiS2/TiO2/C electrode (termed as TiS2/S-TiO2/C). Such enhanced pseudo-capacitive activity allows rapid chemical kinetics and significantly improves the high-rate sodium storage performance of TiO2. The TiS2/S-TiO2/C composite electrode delivers a high capacity of 114 mAh g-1 at a current density of 5000 mA g-1. The capacity maintains at high level (161 mAh g-1) even after 1500 cycles and is still characterized by 58 mAh g-1 at the extreme condition of 10,000 mA g-1 after 10,000 cycles.

3D Honeycomb Architecture Enables a High-Rate and Long-Life Iron (III) Fluoride-Lithium Battery.

Metal fluoride-lithium batteries with potentially high energy densities, even higher than lithium-sulfur batteries, are viewed as very promising candidates for next-generation lightweight and low-cost rechargeable batteries. However, so far, metal fluoride cathodes have suffered from poor electronic conductivity, sluggish reaction kinetics and side reactions causing high voltage hysteresis, poor rate capability, and rapid capacity degradation upon cycling. Herein, it is reported that an FeF3 @C composite having a 3D honeycomb architecture synthesized by a simple method may overcome these issues. The FeF3 nanoparticles (10-50 nm) are uniformly embedded in the 3D honeycomb carbon framework where the honeycomb walls and hexagonal-like channels provide sufficient pathways for the fast electron and Li-ion diffusion, respectively. As a result, the as-produced 3D honeycomb FeF3 @C composite cathodes even with high areal FeF3 loadings of 2.2 and 5.3 mg cm-2 offer unprecedented rate capability up to 100 C and remarkable cycle stability within 1000 cycles, displaying capacity retentions of 95%-100% within 200 cycles at various C rates, and ≈85% at 2C within 1000 cycles. The reported results demonstrate that the 3D honeycomb architecture is a powerful composite design for conversion-type metal fluorides to achieve excellent electrochemical performance in metal fluoride-lithium batteries.

Magnetic Properties of Epitaxially Grown SrRuO3 Nanodots.

We present the fabrication and exploration of arrays of nanodots of SrRuO3 with dot sizes between 500 and 15 nm. Down to the smallest dot size explored, the samples were found to be magnetic with a maximum Curie temperature TC achieved by dots of 30 nm diameter. This peak in TC is associated with a dot-size-induced relief of the epitaxial strain, as evidenced by scanning transmission electron microscopy.

3D Nanofabrication of High-Resolution Multilayer Fresnel Zone Plates.

Focusing X-rays to single nanometer dimensions is impeded by the lack of high-quality, high-resolution optics. Challenges in fabricating high aspect ratio 3D nanostructures limit the quality and the resolution. Multilayer zone plates target this challenge by offering virtually unlimited and freely selectable aspect ratios. Here, a full-ceramic zone plate is fabricated via atomic layer deposition of multilayers over optical quality glass fibers and subsequent focused ion beam slicing. The quality of the multilayers is confirmed up to an aspect ratio of 500 with zones as thin as 25 nm. Focusing performance of the fabricated zone plate is tested toward the high-energy limit of a soft X-ray scanning transmission microscope, achieving a 15 nm half-pitch cut-off resolution. Sources of adverse influences are identified, and effective routes for improving the zone plate performance are elaborated, paving a clear path toward using multilayer zone plates in high-energy X-ray microscopy. Finally, a new fabrication concept is introduced for making zone plates with precisely tilted zones, targeting even higher resolutions.

Cross-Linking Hollow Carbon Sheet Encapsulated CuP2 Nanocomposites for High Energy Density Sodium-Ion Batteries.

Sodium-ion batteries (SIB) are regarded as the most promising competitors to lithium-ion batteries in spite of expected electrochemical disadvantages. Here a "cross-linking" strategy is proposed to mitigate the typical SIB problems. We present a SIB full battery that exhibits a working potential of 3.3 V and an energy density of 180 Wh kg-1 with good cycle life. The anode is composed of cross-linking hollow carbon sheet encapsulated CuP2 nanoparticles (CHCS-CuP2) and a cathode of carbon coated Na3V2(PO4)2F3 (C-NVPF). For the preparation of the CHCS-CuP2 nanocomposites, we develop an in situ phosphorization approach, which is superior to mechanical mixing. Such CHCS-CuP2 nanocomposites deliver a high reversible capacity of 451 mAh g-1 at 80 mA g-1, showing an excellent capacity retention ratio of 91% in 200 cycles together with good rate capability and stable cycling performance. Post mortem analysis reveals that the cross-linking hollow carbon sheet structure as well as the initially formed SEI layers are well preserved. Moreover, the inner electrochemical resistances do not significantly change. We believe that the presented battery system provides significant progress regarding practical application of SIB.

Structural optimization and amorphous calcium phosphate mineralization in sensory setae of a terrestrial crustacean (Isopoda: Oniscidea).

Terrestrial isopods possess large sensory setae on their walking legs. Increased fracture resistance of these elongated structures is of crucial importance, making the exoskeleton forming the setae an interesting durable material that may inspire biomimetic designs. We studied the cuticle of the sensory setae with analytical electron microscopy in order to gain detailed insights into its structure and composition at the nanometer scale and identify features that increase the fracture resistance of these minute skeletal elements. The setae are stiff structures formed by mineralized cuticle that are connected to the leg exoskeleton by a non-mineralized joint membrane. Our results demonstrate that different layers of the setal cuticle display contrasting organizations of the chitin-protein fibers and mineral particles. While in the externally positioned exocuticle organic fibers shift their orientation helicoidally in sequential layers, the fibers are aligned axially in the internally positioned endocuticle. In the setal cuticle, layers of structurally anisotropic cuticle likely providing strength in the axial direction are combined with layers of isotropic cuticle which may allow the setae to better resist perpendicular loading. They are further strengthened with amorphous calcium phosphate, a highly fracture resistant mineral rarely observed in invertebrate skeletons.

Correcting the linear and nonlinear distortions for atomically resolved STEM spectrum and diffraction imaging.

Specimen and stage drift as well as scan distortions can lead to a mismatch between true and desired electron probe positions in scanning transmission electron microscopy (STEM) which can result in both linear and nonlinear distortions in the subsequent experimental images. This problem is intensified in STEM spectrum and diffraction imaging techniques owing to the extended dwell times (pixel exposure time) as compared to conventional STEM imaging. As a consequence, these image distortions become more severe in STEM spectrum/diffraction imaging. This becomes visible as expansion, compression and/or shearing of the crystal lattice, and can even prohibit atomic resolution and thus limits the interpretability of the results. Here, we report a software tool for post-correcting the linear and nonlinear image distortions of atomically resolved 3D spectrum imaging as well as 4D diffraction imaging. This tool improves the interpretability of distorted STEM spectrum/diffraction imaging data.

A Sulfur-Limonene-Based Electrode for Lithium-Sulfur Batteries: High-Performance by Self-Protection.

The lithium-sulfur battery is considered as one of the most promising energy storage systems and has received enormous attentions due to its high energy density and low cost. However, polysulfide dissolution and the resulting shuttle effects hinder its practical application unless very costly solutions are considered. Herein, a sulfur-rich polymer termed sulfur-limonene polysulfide is proposed as powerful electroactive material that uniquely combines decisive advantages and leads out of this dilemma. It is amenable to a large-scale synthesis by the abundant, inexpensive, and environmentally benign raw materials sulfur and limonene (from orange and lemon peels). Moreover, owing to self-protection and confinement of lithium sulfide and sulfur, detrimental dissolution and shuttle effects are successfully avoided. The sulfur-limonene-based electrodes (without elaborate synthesis or surface modification) exhibit excellent electrochemical performances characterized by high discharge capacities (≈1000 mA h g-1 at C/2) and remarkable cycle stability (average fading rate as low as 0.008% per cycle during 300 cycles).

Polyphosphate-accumulating bacterial community colonizing the calcium bodies of terrestrial isopod crustaceans Titanethes albus and Hyloniscus riparius.

Terrestrial isopods from the group Trichoniscidae accumulate calcium in specialized organs, known as the calcium bodies. These consist of two pairs of epithelial sacs located alongside the digestive system. These organs contain various forms of calcium and constantly present bacteria. To elucidate their origin and role, we analyzed the bacteria of the calcium bodies in the cave-dwelling isopod Titanethes albus and the epigean species Hyloniscus riparius, by microscopy, histochemistry, energy dispersive X-ray spectrometry, 16S rRNA analysis and in situ hybridization. The calcium bodies of both species comprise numerous and diverse bacterial communities consisting of known soil bacteria. Despite their diversity, these bacteria share the polyphosphate-accumulation ability. We present the model of phosphorous dynamics in the calcium bodies during the molting cycle and potentially beneficial utilization of the symbiotic phosphate by the host in cyclic regeneration of the cuticle. Although not fully understood, this unique symbiosis represents the first evidence of polyphosphate-accumulating bacterial symbionts in the tissue of a terrestrial animal.

Magnesium-Assisted Continuous Growth of Strongly Iron-Enriched Incisors.

Teeth are an excellent example where optimally designed nanoarchitectures with precisely constructed components consist of simple compounds. Typically, these simple constituent phases with insignificant properties show mechanical property amplifications when formed into composite architectures. Material properties of functional composites are generally regulated on the nanoscale, which makes their characterization particularly demanding. Using advanced analytical and imaging transmission electron microscopy techniques, we identified innovative microstructural adjustments combined with astonishing compositional adaptations in incisors of coypu. Unique constituents, recognized as an additional amorphous Fe-rich surface layer followed by a transition zone covering pigmented enamel, provide the required structural stability to withstand repeated mechanical load. The chemically diverse Fe-rich surface layer, including ferrihydrite and iron-calcium phosphates, gives the typical orange-brown coloration to the incisors. Within the spaces between elongated hydroxyapatite crystals in the pigmented enamel, only ferrihydrite was found, implying that enamel pigmentation is a very strictly controlled process. Most significantly, an unprecedentedly high amount of Mg was measured in the amorphous flake-like material within the dentinal tubules of the incisors, suggesting the presence of a (Mg,Ca) phosphate phase. This unusually high influx of Mg into the dentin of incisors, but not molars, suggests a substantial functionality of Mg in the initial formation stages and constant growth of incisors. The present results emphasize the strong mutual correlation among the microstructure, chemical composition, and mechanical properties of mineralized dental tissues.

Axially aligned organic fibers and amorphous calcium phosphate form the claws of a terrestrial isopod (Crustacea).

Skeletal elements that are exposed to heavy mechanical loads may provide important insights into the evolutionary solutions to mechanical challenges. We analyzed the microscopic architecture of dactylus claws in the woodlice Porcellio scaber and correlated these observations with analyses of the claws' mineral composition with energy dispersive X-ray spectrometry (EDX), electron energy loss spectroscopy (EELS) and selected area electron diffraction (SAED). Extraordinarily, amorphous calcium phosphate is the predominant mineral in the claw endocuticle. Unlike the strongly calcified exocuticle of the dactylus base, the claw exocuticle is devoid of mineral and is highly brominated. The architecture of the dactylus claw cuticle is drastically different from that of other parts of the exoskeleton. In contrast to the quasi-isotropic structure with chitin-protein fibers oriented in multiple directions, characteristic of the arthropod exoskeleton, the chitin-protein fibers and mineral components in the endocuticle of P. scaber claws are exclusively axially oriented. Taken together, these characteristics suggest that the claw cuticle is highly structurally anisotropic and fracture resistant and can be explained as adaptations to predominant axial loading of the thin, elongated claws. The nanoscale architecture of the isopod claw may inspire technological solutions in the design of durable machine elements subjected to heavy loading and wear.