ABSTRACT
Drafting strategic plans for dental school departments traditionally involves a committee-led or leadership-driven process, often overlooking input from the majority of departmental members. In this manuscript, the authors advocate for a novel approach wherein departmental activities undergo comprehensive review and analysis, and the establishment of novel objectives through diverse forums of engagement with both faculty and staff, conducted collectively and individually over a concise time limit. This methodology endeavors to solicit input from all departmental constituents through varied channels, fostering an environment wherein all members feel empowered to express their viewpoints, resulting in a strategic plan that resonates with the entire department and enhances the likelihood of successful implementation.
ABSTRACT
Purpose: To quantify the cumulative oral implant survival rates and changes in radiographic bone levels based on the configuration of the implant-abutment connection type over time. Materials and Methods: An electronic literature search was conducted in four databases (PubMed/MEDLINE, Cochrane Library, Web of Science, and Embase), and records were refereed by two independent reviewers based on the inclusion criteria. Data from included articles were grouped by implant-abutment connection type into four categories ([1] external hex; [2] bone level, internal, narrow cone < 45 degrees; [3] bone level, internal wide cone ≥ 45 degrees or flat; and [4] tissue level) and duration of follow-up (short-term 1 to 2 years, mid-term 2 to 5 years, and long-term > 5 years). Meta-analyses were performed for cumulative survival rate (CSR) and changes in marginal bone level (ΔMBL) from baseline (loading) to last reported follow-up. Studies were split or merged as appropriate based on the implants and follow-up duration in the study and trial design. The study was compiled under PRISMA 2020 guidelines and registered in the PROSPERO database. Results: A total of 3,082 articles were screened. Full-text review of 465 articles resulted in a total of 270 articles (representing 16,448 subjects with 45,347 implants) included for quantitative synthesis and analysis. Mean ΔMBL (95% CI) was as follows: short-term external hex = 0.68 mm (0.57, 0.79); short-term bone level, internal, narrow cone < 45 degrees = 0.34 mm (0.25, 0.43); short-term bone level, internal wide cone ≥ 45 degrees = 0.63 mm (0.52, 0.74); short-term tissue level = 0.42 mm (0.27, 0.56); mid-term external hex = 1.03 mm (0.72, 1.34); mid-term bone level, internal, narrow cone < 45 degrees = 0.45 mm (0.34, 0.56); mid-term bone level, internal wide cone ≥ 45 degrees = 0.73 mm (0.58, 0.88); mid-term tissue level = 0.4 mm (0.21, 0.61); long-term external hex = 0.98 mm, 0.70, 1.25); long-term bone level, internal, narrow cone < 45 degrees = 0.44 mm (0.31, 0.57); long-term bone level, internal wide cone ≥ 45 degrees = 0.95 mm (0.68, 1.22); and long-term tissue level = 0.43 mm (0.24, 0.61). CSRs (95% CI) were: short-term external hex = 97% (96%, 98%); short-term bone level, internal, narrow cone < 45 degrees = 99% (99%, 99%); short-term bone level, internal wide cone ≥ 45 degrees = 98% (98%, 99%); short-term tissue level = 99% (98%, 100%); mid-term external hex = 97% (96%, 98%); mid-term bone level, internal, narrow cone < 45 degrees = 98% (98%, 99%); mid-term bone level, internal wide cone ≥ 45 degrees = 99% (98%, 99%); mid-term tissue level = 98% (97%, 99%); long-term external hex = 96% (95%, 98%); long-term bone level, internal, narrow cone < 45 degrees = 98% (98%, 99%); long-term bone level, internal wide cone ≥ 45 degrees = 99% (98%, 100%); and long-term tissue level = 99% (98%, 100%). Conclusion: The configuration of the implant-abutment interface has a measurable effect on the ΔMBL over time. These changes can be observed over a period of at least 3 to 5 years. At all measured time intervals, similar ΔMBL was noted for external hex and internal wide cone ≥ 45-degree connections, as were internal, narrow cone < 45-degree and tissue-level connections.
Subject(s)
Dental Implants , Maxillofacial Prosthesis , Humans , Survival RateABSTRACT
PURPOSE: The objective of this study was to compare patient-reported outcomes (PROs) of periimplant soft tissue inflammation and aesthetics around single-tooth implants in the anterior maxillary region with three different implant-abutment interface designs. METHODS: Participants were randomized to one of three different types of implant-abutment interface designs [Conical (CI), flat-to-flat (FI), and Platform Switched (PS)]. Implants and provisional crowns with prefabricated titanium abutments were placed 5 months following extraction and/or ridge augmentation. Permanent ceramic crowns with zirconia abutments were placed after 12 weeks. To assess PROs, appearance and inflammation questionnaires were completed from provisional crown placement to the 3-year follow-up. RESULTS: Tooth appearance at the 3-year follow-up revealed a difference amongst CI, FI and PS implants (p=0.049; Kruskal-Wallis test). PS was rated better than FI (p=0.047) at 1 year for appearance of soft-tissue and satisfaction with colour. There were no differences for self-consciousness, smile and pain/discomfort while eating/hard food items. CONCLUSIONS: Although participants tended to rate the health of mucosa around PS implants as slighty better than the other two implant systems, the differences were minimal and inconsistent. Thus, patient satisfaction in terms self-perceived gingival health and esthetics was high for all 3 systems tested, suggesting that patients are unable to detect mucosal inflammation. CLINICAL SIGNIFICANCE: Patients find it difficult to perceive mucosal inflammation; hence, it is recommended that patients attend implant follow-up visits, even if they do not perceive inflammation. The study suggests that there is a relationship between the PROs and the clinical outcomes of tested implants.
Subject(s)
Dental Implants, Single-Tooth , Tooth , Humans , Esthetics, Dental , Dental Implantation, Endosseous/adverse effects , Dental Implantation, Endosseous/methods , Crowns , Zirconium , Inflammation , Dental AbutmentsABSTRACT
The landscape of dental education is undergoing a paradigm shift from both the learner's and teacher's perspectives. Evolving technologies, including artificial intelligence, virtual reality, augmented reality, and mixed reality, are providing synergistic opportunities to create new and exciting educational platforms. The evolution of these platforms will likely play a significant role in dental education. This is especially true in the wake of calamities like the COVID-19 pandemic during which educational activities had to be shutdown or moved online. This experience demonstrated that it is prudent to develop curricula that are both agile and efficient via creating hybrid courses that provide effective learning experiences regardless of the mode of delivery. Although there is growing interest in incorporating technology into dental education, there are few examples of how to actually manage the implementation of technology into the curriculum. In this paper, we provide a road map for incorporating technology into the dental curriculum to create agility and discuss challenges and possible solutions.
Subject(s)
COVID-19 , Education, Dental , Humans , Pandemics , Artificial Intelligence , COVID-19/epidemiology , Curriculum , TechnologyABSTRACT
Purpose: The purpose of this study was to describe the prevalence of radiographically identifiable developmental dental anomalies (DDA) in a university-based pediatric dental clinic and to assess for associations between DDA and health status. Methods: Retrospective data, obtained from the electronic dental records of a three-year pediatric patient cohort, were evaluated by two trained and calibrated examiners. Strict inclusion/ exclusion criteria were applied. A validated image quality grading system was used for radiograph assessment, and the physical status classification of the American Academy of Anesthesiology was utilized. A chi-square test and bivariate logistic regression were used for statistical analysis. The inter- and intraexaminer reliability was assessed using Cohen's Kappa. Results: A total of 1,478 subjects (69 percent medically healthy) were enrolled. DDA were identified in 25 percent of the subjects, with hyperdontia, hypodontia, and microdontia being more common. A statistically significant association was found between the presence of DDA and health status (P<0.001) and between DDA and asthma (P=0.035). Patients with systemic disturbances showed 2.12 times greater odds of having DDA (P<0.001, 95 percent confidence interval equals 1.7-2.7). Conclusions: The prevalence of developmental dental anomalies was high, with one in four patients affected. DDA in number were the most common. Patients with systemic disturbances had greater odds of having DDA.
Subject(s)
Tooth Abnormalities , Child , Health Status , Humans , Prevalence , Reproducibility of Results , Retrospective Studies , Tooth Abnormalities/diagnostic imaging , Tooth Abnormalities/epidemiologyABSTRACT
BACKGROUND: The dental office potentially possesses all transmission risk factors for severe acute respiratory syndrome coronavirus 2. Anticipating the future widespread use of COVID-19 testing in dental offices, the authors wrote this article as a proactive effort to provide dental health care providers with current and necessary information surrounding the topic. METHODS: The authors consulted all relevant and current guidelines from the Centers for Disease Control and Prevention and the US Food and Drug Administration, as well as online resources and review articles. RESULTS: Routine COVID-19 screening and triage protocols are unable to detect all infected people. With the advancements in diagnostic tools and techniques, COVID-19 testing at home or in the dental office may provide dentists with the ability to evaluate the disease status of their patients. At-home or point-of-care (POC) tests, providing results within minutes of being administered, would allow for appropriate measures and rapid decisions about dental patients' care process. In this review, the authors provide information about available laboratory and POC COVID-19 screening methods and identify and elaborate on the options available for use by dentists as well as the regulatory requirements of test administration. CONCLUSIONS: Dentists need to be familiar with COVID-19 POC testing options. In addition to contributing to public health, such tests may deliver rapid, accurate, and actionable results to clinical and infection control teams to enhance the safe patient flow in dental practices. PRACTICAL IMPLICATIONS: Oral health care must continue to offer safety in this or any future pandemics. Testing for severe acute respiratory syndrome coronavirus 2 at the POC offers a control mechanism contributing to and enhancing the real and perceived safety of care in the dental office setting.
Subject(s)
COVID-19 Testing , COVID-19 , Dental Offices , Humans , Laboratories , Point-of-Care Systems , SARS-CoV-2ABSTRACT
Knowledge about the detection potential and detection rates of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in various body fluids and sites is important for dentists since they, directly or indirectly, deal with many of these fluids/sites in their daily practices. In this study, we attempt to review the latest evidence and meta-analysis studies regarding the detection rate of SARS-CoV-2 in different body specimens and sites as well as the characteristics of these sample. The presence/detection of SARS-CoV-2 viral biomolecules (nucleic acid, antigens, antibody) in different clinical specimens depends greatly on the specimen type and timing of collection. These specimens/sites include nasopharynx, oropharynx, nose, saliva, sputum, bronchoalveolar lavage, stool, urine, ocular fluid, serum, plasma and whole blood. The relative detection rate of SARS-CoV-2 viral biomolecules in each of these specimens/sites is reviewed in detail within the text. The infectious potential of these specimens depends mainly on the time of specimen collection and the presence of live replicating viral particles.
ABSTRACT
COVID-19, caused by the SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) virus, has been rapidly spreading worldwide since December 2019, causing a public health crisis. Recent studies showed SARS-CoV-2's ability to infect humans via airborne routes. These motivated the study of aerosol and airborne droplet transmission in a variety of settings. This study performs a large-scale numerical simulation of a real-world dentistry clinic that contains aerosol-generating procedures. The simulation tracks the dispersion of evaporating droplets emitted during ultrasonic dental scaling procedures. The simulation considers 25 patient treatment cubicles in an open plan dentistry clinic. The droplets are modeled as having a volatile (evaporating) and nonvolatile fraction composed of virions, saliva, and impurities from the irrigant water supply. The simulated clinic's boundary and flow conditions are validated against experimental measurements of the real clinic. The results evaluate the behavior of large droplets and aerosols. We investigate droplet residence time and travel distance for different droplet diameters, surface contamination due to droplet settling and deposition, airborne aerosol mass concentration, and the quantity of droplets that escape through ventilation. The simulation results raise concerns due to the aerosols' long residence times (averaging up to 7.31 min) and travel distances (averaging up to 24.45 m) that exceed social distancing guidelines. Finally, the results show that contamination extends beyond the immediate patient treatment areas, requiring additional surface disinfection in the clinic. The results presented in this research may be used to establish safer dental clinic operating procedures, especially if paired with future supplementary material concerning the aerosol viral load generated by ultrasonic scaling and the viral load thresholds required to infect humans.
ABSTRACT
PURPOSE: This study sought to define the tissue responses at different implant-abutment interfaces by studying bone and peri-implant mucosal changes using a 5-year prospective randomized clinical trial design study. The conus interface was compared with the flat-to-flat interface and platform-switched implant-abutment systems. MATERIALS AND METHODS: One hundred forty-one subjects were recruited and randomized to the three treatment groups according to defined inclusion and exclusion criteria. Following implant placement and immediate provisionalization in healed alveolar ridges, clinical, photographic, and radiographic parameters were measured at 6 months and annually for 5 years. The calculated changes in marginal bone levels, peri-implant mucosal zenith location, papillae lengths, and peri-implant Plaque Index and bleeding on probing were statistically compared. RESULTS: Forty-eight conus interface implants, 49 flat-to-flat interface implants, and 44 platform-switched implants were placed in 141 subjects. Six platform-switched interface and eight flatto- flat interface implants failed, most of them within 3 months. After 5 years, 33 conical interface, 28 flat-to-flat interface, and 27 platform-switched interface implants remained for evaluation. Calculation of marginal bone level change showed a mean marginal bone loss of -0.16 ± 0.45 (-1.55 to 0.65), -0.92 ± 0.70 (-2.90 to 0.20), and -0.81 ± 1.06 (-3.35 to 1.35) mm for conical interface, flat-to-flat interface, and platform-switched interface implants, respectively (P < .0005). The peri-implant mucosal zenith changes were minimal for all three interface designs (0.10 mm and +0.08 mm, P > .60). Only 16% to 19% of the surfaces had presence of bleeding on probing, with no significant differences (P > .81) between groups. Interproximal tissue changes were positive and similar among the implant interface designs. CONCLUSION: Over 5 years, the immediate provisionalization protocol resulted in stable peri-implant mucosal responses for all three interfaces. Compared with the flat-to-flat and platform-switched interfaces, the conical interface implants demonstrated significantly less early marginal bone loss. The relationship of marginal bone responses and mucosal responses requires further experimental consideration.
Subject(s)
Alveolar Bone Loss , Dental Implants, Single-Tooth , Alveolar Bone Loss/diagnostic imaging , Alveolar Bone Loss/etiology , Crowns , Esthetics, Dental , Humans , Maxilla/diagnostic imaging , Maxilla/surgery , Prospective StudiesABSTRACT
OBJECTIVE: The aim of this multicenter, randomized controlled trial was to compare the clinical and radiographic outcomes of 6-mm or 11-mm implants, placed in the posterior maxilla and mandible, during a 5-year follow-up period. MATERIALS AND METHODS: Ninety-five patients with adequate bone height for 11-mm implants, were randomly allocated to a 6-mm group (test group with short implants) or an 11-mm group (control group with standard-length implants). Two or three implants of the same length were placed in each patient and after 6 weeks loaded with a splinted provisional restoration. This was followed by definitive splinted restoration 6 months after implant placement. Clinical and radiographic parameters, including the occurrence of complications were recorded. RESULTS: A total of 49 patients were enrolled to receive 6-mm implants (n = 108) and 46 patients to receive 11-mm implants (n = 101). Three implants (two of 6 mm and one of 11 mm in length) were lost before loading and one 6-mm implant after 15 months of function, and one 11-mm implant was lost during the first year of function. The 5-year survival rates were 96.0% and 98.9% in the 6-mm and 11-mm group, respectively. The mean marginal bone level changes 5 years post-loading were 0.01 ± 0.45 mm (bone gain) in the 6-mm group and -0.12 ± 0.93 mm (bone loss) in the 11-mm group (p = .7670). Clinical parameters, including plaque, bleeding on probing and pocket probing depth were not significantly different between the groups, and also technical complications were low. CONCLUSION: The clinical and radiographic outcomes of 6-mm short and 11-mm standard-length implants were not different during a 5-year evaluation period.
Subject(s)
Alveolar Bone Loss , Dental Implants , Immediate Dental Implant Loading , Alveolar Bone Loss/diagnostic imaging , Alveolar Bone Loss/etiology , Dental Implantation, Endosseous , Dental Prosthesis Design , Dental Prosthesis, Implant-Supported , Dental Restoration Failure , Follow-Up Studies , Humans , Treatment OutcomeABSTRACT
Purpose: This pilot study aimed to evaluate the association between women's depression risk and their children's return for dental treatment. Methods: A total of 175 female caregivers of children presenting for an initial dental examination between May and October 2019 at a university clinic answered demographic questions and a validated survey on depression risk. An analysis of caregiver's depression risk relative to children's attendance at the next treatment appointment was made. Results: One hundred and eight female caregivers were included in the analysis. Average age was 33 years (standard deviation ± 6.5 years), and 52 percent were Hispanic. The rate of risk for depression was 17.5 percent. Most women at risk lived at least 20 miles away, had an income of less than $29,999, were unemployed or employed part-time, and had no help with childcare. White caregivers were more likely to fail to attend their child's appointment (chi-square [X²] = 7.80, P=0.02) while Hispanic women were more likely to return (X² = 4.10, P=0.04). Caregivers with low depression risk were more likely to return for the child's scheduled appointment (X² = 13.37, P<0.001). Thus, there was a positive association between high depression risk and failed appointments (r=0.474, P<0.01). Conclusion: Children of women at risk for depression are more likely to fail to attend their dental appointment.
Subject(s)
Caregivers , Depression , Adult , Appointments and Schedules , Child , Female , Humans , Pilot Projects , Surveys and QuestionnairesABSTRACT
PURPOSE: The autogenous bone block graft is regarded as the gold standard material due to reported osteoconductive, osteoinductive, and osteogenic properties. Various intraoral donor sites for autogenous block grafts are presented in the literature. The aim of this study was to radiographically evaluate the maximum dimensions, volume, and bone quality values of these sites. MATERIALS AND METHODS: According to the inclusion criteria, 50 cone beam computed tomography (CBCT) images from 50 subjects were evaluated. The maximum length, width, height, and volume of autogenous regions where block grafts could be harvested were measured. Radiographic bone quality was calculated by using Hounsfield units derived from CBCT (CBCT-HU). RESULTS: The mean age of 50 subjects (19 men and 31 women) was 55.84 ± 15.9 years. In this study, the symphysis was the largest potential donor site (3.14 ± 1.05 cm3), while maxillary tuberosity was the smallest (0.53 ± 0.34 cm3). These results correlated with bone density values, where the symphysis retained the highest values (937.31 ± 160.59 CBCT-HU) and the maxillary tuberosity had the lowest values (360.87 ± 141.48 CBCT-HU). CONCLUSION: Intraoral bone blocks have restrictions due to surrounding vital anatomical structures. The surgeons should consider these vital structures using accurate CBCT evaluation. The volume and density of the maximal bone harvest from the symphysis was statistically higher in comparison with ramus, palatal, and maxillary tuberosity bone blocks.
Subject(s)
Bone Transplantation , Cone-Beam Computed Tomography , Adult , Aged , Autografts , Female , Humans , Male , Maxilla , Middle Aged , Transplant Donor SiteABSTRACT
An international advisory group met at the National Institutes of Health in Bethesda, Maryland in 2017, to discuss a new classification system for the ectodermal dysplasias (EDs) that would integrate both clinical and molecular information. We propose the following, a working definition of the EDs building on previous classification systems and incorporating current approaches to diagnosis: EDs are genetic conditions affecting the development and/or homeostasis of two or more ectodermal derivatives, including hair, teeth, nails, and certain glands. Genetic variations in genes known to be associated with EDs that affect only one derivative of the ectoderm (attenuated phenotype) will be grouped as non-syndromic traits of the causative gene (e.g., non-syndromic hypodontia or missing teeth associated with pathogenic variants of EDA "ectodysplasin"). Information for categorization and cataloging includes the phenotypic features, Online Mendelian Inheritance in Man number, mode of inheritance, genetic alteration, major developmental pathways involved (e.g., EDA, WNT "wingless-type," TP63 "tumor protein p63") or the components of complex molecular structures (e.g., connexins, keratins, cadherins).