ABSTRACT
The present work focuses on the surface coating of VAR technical fibers, consisting of 64% viscose (cellulose), 24% Kevlar, 10% other types of polyamides, and 2% antistatic polymers. Kevlar is an aramid material exhibiting excellent mechanical properties, while cellulose is a natural linear polymer composed of repeating ß-d-glucose units, having several applications in the materials industry. Herein, we synthesized novel, tailor-designed organic molecules possessing functional groups able to anchor on VAR fabrics and cellulose materials, thus altering their properties on demand. To this end, we utilized methyl-α-d-glucopyranose as a model compound, both to optimize the reaction conditions, before applying them to the material and to understand the chemical behavior of the material at the molecular level. The efficient coating of the VAR fabric with the tailor-made compounds was then implemented. Thorough characterization studies using Raman and IR spectroscopies as well as SEM imaging and thermogravimetric analysis were also carried out. The wettability and water repellency and antibacterial properties of the modified VAR fabrics were also investigated in detail. To the best of our knowledge, such an approach has not been previously explored, among other factors regarding the understanding of the anchoring mechanism at the molecular level. The proposed modification protocol holds the potential to improve the properties of various cellulose-based materials beyond VAR fabrics.
ABSTRACT
The current study emphasizes the minimal toxicity observed in vitro and in vivo for carbon nanohorns (CNHs) modified with third generation polyamidoamine (PAMAM) dendrimers. Initially, we investigated the interactions between CNH-PAMAM and lipid bilayers, which were utilized as representative models of cellular membranes for the evaluation of their toxicity in vitro. We found that the majority of those interactions occur between the modified CNHs and the polar groups of phospholipids, meaning that CNH-PAMAM does not incorporate into the lipid chains, and thus, disruption of the lipid bilayer structure is avoided. This outcome is a very important observation for further evaluation of CNH-PAPAM in cell lines and in animal models. Next, we demonstrated the potential of CNH-PAMAM for complexation with insulin, as a proof of concept for its employment as a delivery platform. Importantly, our study provides comprehensive evidence of low toxicity for CNH-PAMAM both in vitro and in vivo. The assessment of cellular toxicity revealed that the modified CNHs exhibited minimal toxicity, with concentrations of 151 µg mL-1 and 349 µg mL-1, showing negligible harm to EO771 cells and mouse embryonic fibroblasts (MEFs), respectively. Moreover, the histological analysis of the mouse livers demonstrated no evidence of tissue necrosis and inflammation, or any visible signs of severe toxicity. These findings collectively indicate the safe profile of CNH-PAMAM and further contribute to the growing body of knowledge on the safe and efficient utilization of CNH-based nanomaterials in drug and protein delivery applications.
ABSTRACT
The covalent modification of the metallic phase of MoS2 with a Hamilton-type ligand is presented, transforming MoS2 to a recognition platform which is able to embrace barbiturate moieties via hydrogen bonding. The successful hydrogen bonding formation is easily monitored by simple electrochemical assessments, if a ferrocene-labeled barbiturate analogue is utilized as a proof of concept. Full spectroscopic, thermal, and electron microscopy imaging characterization is provided for the newly formed recognition system, along with valuable insights concerning the electrochemical sensing. The given methodology expands beyond the sensing applications, confidently entering the territory of supramolecular interactions on the surface of 2D transition metal dichalcogenides. The well-designed host-guest chemistry presented herein, constitutes a guide and an inspiration for hosting customized-structured functional building blocks on MoS2 and its relatives via hydrogen bonding, opening up new opportunities regarding potential applications.
ABSTRACT
Covalent functionalization of tungsten disulfide (WS2 ) with photo- and electro-active nickel-porphyrin (NiP) is reported. Exfoliated WS2 interfacing NiP moieties with 1,2-dithiolane linkages is assayed in the oxygen evolution reaction under both dark and illuminated conditions. The hybrid material presented, WS2 -NiP, is fully characterized with complementary spectroscopic, microscopic, and thermal techniques. Standard yet advanced electrochemical techniques, such as linear sweep voltammetry, electrochemical impedance spectroscopy, and calculation of the electrochemically active surface area, are used to delineate the catalytic profile of WS2 -NiP. In-depth study of thin films with transient photocurrent and photovoltage response assays uncovers photo-enhanced electrocatalytic behavior. The observed photo-enhanced electrocatalytic activity of WS2 -NiP is attributed to the presence of Ni centers coordinated and stabilized by the N4 motifs of tetrapyrrole rings at the tethered porphyrin derivative chains, which work as photoreceptors. This pioneering work opens wide routes for water oxidation, further contributing to the development of non-noble metal electrocatalysts.
ABSTRACT
The oxygen reduction reaction (ORR) 2e- pathway provides an alternative and green route for industrial hydrogen peroxide (H2 O2 ) production. Herein, the ORR photo/electrocatalytic activity in the alkaline electrolyte of manganese and iron porphyrin (MnP and FeP, respectively) electrostatically associated with modified 1T/2H MoS2 nanosheets is reported. The best performing catalyst, MnP/MoS2 , exhibits excellent electrocatalytic performance towards selective H2 O2 formation, with a low overpotential of 20 mV for the 2e- ORR pathway (Eons = 680 mV vs RHE) and an H2 O2 yield up to 99%. Upon visible light irradiation, MnP/MoS2 catalyst shows significant activity enhancement along with good stability. Electrochemical impedance spectroscopy assays suggest a reduced charge transfer resistance value at the interface with the electrolyte, indicating an efficient intra-ensemble transfer process of the photo-excited electrons through the formation of a type II heterojunction or Schottky contact, and therefore justifies the boosted electrochemical activities in the presence of light. Overall, this work is expected to inspire the design of novel advanced photo/electrocatalysts, paving the way for sustainable industrial H2 O2 production.
Subject(s)
Molybdenum , Porphyrins , Disulfides , Hydrogen Peroxide , Iron , Manganese , Molybdenum/chemistry , Peroxides , SulfidesABSTRACT
A non-metal covalent hybrid of fullerene and graphene was synthesized in one step via fluorographene chemistry. Its electrocatalytic performance for the hydrogen evolution reaction and durability was ascribed to intrahybrid charge-transfer phenomena, exploiting the electron-accepting properties of C60 and the high conductivity and large surface area of graphene.
ABSTRACT
Easy and effective modification approaches for transition metal dichalcogenides are highly desired in order to make them active toward electrocatalysis. In this manner, we report functionalized molybdenum diselenide (MoSe2) and tungsten diselenide (WSe2) via metal-ligand coordination with pyridine rings for the subsequent covalent grafting of a cobalt-porphyrin. The new hybrid materials were tested towards an electrocatalytic hydrogen evolution reaction in both acidic and alkaline media and showed enhanced activity compared to intact MoSe2 and WSe2. Hybrids exhibited lower overpotential, easier reaction kinetics, higher conductivity, and excellent stability after 10,000 ongoing cycles in acidic and alkaline electrolytes compared to MoSe2 and WSe2. Markedly, MoSe2-based hybrid material showed the best performance and marked a significantly low onset potential of -0.17 V vs RHE for acidic hydrogen evolution reaction. All in all, the ease and fast modification route provides a versatile functionalization procedure, extendable to other transition metal dichalcogenides, and can open new pathways for the realization of functional nanomaterials suitable in electrocatalysis.
ABSTRACT
We describe the basal plane functionalization of chemically exfoliated molybdenum disulfide (ce-MoS2) nanosheets with a benzo-15-crown-5 ether (B15C5), promoted by the chemistry of diazonium salts en route to the fabrication and electrochemical assessment of an ion-responsive electrode. The success of the chemical modification of ce-MoS2 nanosheets was investigated by infrared and Raman spectroscopy, and the amount of the incorporated crown ether was estimated by thermogravimetric analysis. Raman spatial mapping at on-resonance excitation allowed us to disclose the structural characteristics of the functionalized B15C5-MoS2 nanosheets and the impact of basal plane functionalization to the stabilization of the 1T phase of ce-MoS2. Morphological investigation of the B15C5-MoS2 hybrid was implemented by atomic force microscopy and high-resolution transmission electron microscopy. Furthermore, fast-Fourier-transform analysis and in situ energy dispersive X-ray spectroscopy revealed the crystal lattice of the modified nanosheets and the presence of crown-ether addends, respectively. Finally, B15C5-MoS2 electrodes were constructed and evaluated as ion-selective electrodes for sodium ions in aqueous solution and an artificial sweat matrix.
Subject(s)
Crown Ethers , Molybdenum , Electrodes , Ions , Microscopy, Electron, TransmissionABSTRACT
In this study, a highly efficient photocatalytic H2 production system is developed by employing porphyrins as photocatalysts. Palladium and platinum tetracarboxyporphyrins (PdTCP and PtTCP) are adsorbed or coadsorbed onto TiO2 nanoparticles (NPs), which act as the electron transport medium and as a scaffold that promotes the self-organization of the porphyrinoids. The self-organization of PdTCP and PtTCP, forming H- and J-aggregates, respectively, is the key element for H2 evolution, as in the absence of TiO2 NPs no catalytic activity is detected. Notably, J-aggregated PtTCPs are more efficient for H2 production than H-aggregated PdTCPs. In this approach, a single porphyrin, which self-organizes onto TiO2 NPs, acts as the light harvester and simultaneously as the catalyst, whereas TiO2 serves as the electron transport medium. Importantly, the concurrent adsorption of PdTCP and PtTCP onto TiO2 NPs results in the most efficient catalytic system, giving a turnover number of 22,733 and 30.2 mmol(H2 ) g(cat)-1 .
ABSTRACT
A study on electron transfer in three electron donor-acceptor complexes is reported. These architectures consist of a zinc phthalocyanine (ZnPc) as the excited-state electron donor and a fullerene (C60 ) as the ground-state electron acceptor. These complexes are brought together by axial coordination at ZnPc. The key variable in our design is the length of the molecular spacer, namely, oligo-p-phenylenevinylenes. The lack of appreciable ground-state interactions is in accordance with strong excited-state interactions, as inferred from the quenching of ZnPc centered fluorescence and the presence of a short-lived fluorescence component. Full-fledged femtosecond and nanosecond transient absorption spectroscopy assays corroborated that the ZnPc â + -C60 â - charge-separated state formation comes at the expense of excited-state interactions following ZnPc photoexcitation. At a first glance, the ZnPc â + -C60 â - charge-separated state lifetime increased from 0.4 to 86.6â ns as the electron donor-acceptor separation increased from 8.8 to 29.1â Å. A closer look at the kinetics revealed that the changes in charge-separated state lifetime are tied to a decrease in the electronic coupling element from 132 to 1.2â cm-1 , an increase in the reorganization energy of charge transfer from 0.43 to 0.63â eV, and a large attenuation factor of 0.27â Å-1 .
ABSTRACT
In the present work, the convergence of two different drug delivery systems is investigated, namely the combination of carbon nanohorns (CNHs) and liposomes. Our effort initially included the synthesis of two conversely charged carbon nanohorns and their subsequent analysis through various methods. The study of their effect on the thermotropic behavior of artificial membranes provided an essential assistance for the upcoming liposome preparation, which were estimated for their physicochemical properties. The presence of CNHs alters the calorimetric parameters of the lipids. We also prepared CNHs:liposome systems. The characteristic morphology and secondary spherical superstructure of CNHs is retained in the chimeric materials, suggesting that the interactions with the liposomes do not alter the dahlia-flower-like aggregation of CNHs. Both CNHs-liposome systems exhibit a relatively small cellular cytotoxicity in vitro, tested in mouse embryonic fibroblasts. To summarize, we developed CNHs:liposome platforms with a complete knowledge of their thermotropic, physicochemical, morphological and nanotoxicological characteristics.
Subject(s)
Carbon/chemistry , Drug Compounding , Liposomes/chemistry , Nanostructures/chemistry , Toxicity Tests , Animals , Cell Survival , Embryo, Mammalian/cytology , Fibroblasts/cytology , Imaging, Three-Dimensional , Lipid Bilayers/chemistry , Lipids/chemistry , Liposomes/ultrastructure , Mice, Inbred C57BL , TemperatureABSTRACT
We report on the synthesis, characterization and photophysical properties of a donor-bridge-acceptor supramolecular hybrid system, consisting of a tetrapyridyl fullerene derivative (C60-tpyr) as electron acceptor, with the four pyridyl groups as part of oligophenyleneethynylene/phenylenevinylene bridges, and zinc porphyrin dimers (ZnP)2 as electron donor species. Based on the metal-to-ligand coordination between the zinc metal centers of (ZnP)2 and the four pyridyl entities of C60-tpyr, a strong binding constant (5 × 105 M-1) for the formation of C60-tpyr·[(ZnP)2]2 was evidenced. Insights into the electronic interactions between the photoactive (ZnP)2 units and C60-tpyr emanated from complementary physicochemical assays, which were further supported by theoretical calculations. Notably, the absorption and emission titration assays revealed strong interactions between the electron donor and acceptor species within C60-tpyr·[(ZnP)2]2, both in the ground and excited state. Moreover, femtosecond and nanosecond laser photolysis transient absorption measurements were performed and provided solid evidence for intramolecular electron transfer processes derived from the singlet excited state of (ZnP)2 to C60-tpyr. Comparison with systems in which either four monomeric zinc porphyrins (ZnP) were complexed with C60-tpyr or a (ZnP)2 was coordinated with a dipyridylfullerene revealed the beneficial role of C60-tpyr in increasing the lifetime of charge-separation.
ABSTRACT
Ammonium-modified MoS2 and WS2 were prepared and characterized by complementary spectroscopic, thermal, and microscopic means. The positive charges on functionalized MoS2 and WS2, due to the presence of ammonium units, were exploited to electrostatically bring in contact an anionic porphyrin bearing a carboxylate moiety, yielding porphyrin/MoS2 and porphyrin/WS2 ensembles, 5a and 5b, respectively. Efficient photoluminescence quenching of porphyrin's emission by MoS2 and WS2 within nanoensembles 5a and 5b, in combination with time-resolved photoluminescence assays, revealed transduction of energy from the photoexcited porphyrin to MoS2 or WS2.
ABSTRACT
This study reports the synthesis of two novel zinc porphyrin families bearing four or eight alkoxy chains at their peripheral phenyl rings, with the length of the alkoxy chains ranging from 2, to 6, and to 12 carbon atoms. All zinc porphyrin derivatives were fully characterized with respect to their photophysical and electrochemical features. The zinc porphyrins could be processed into thin films which, depending on the length of the alkoxy chains on the aryl substituents, were found to be either of an ordered or a disordered nature, as it is revealed by spectroscopic and microscopic techniques. The films containing ordered self-assemblies displayed significantly enhanced electrical conductivity compared to the disordered films. This led to remarkable differences regarding their electroluminescence response that occurs at lower bias. Furthermore, their luminous efficiency was of almost one order of magnitude higher than that of disordered films.
ABSTRACT
Sequential photoinduced energy transfer followed by electron transfer leading to the formation of charge separated states in a newly assembled series of supramolecular triads comprised of boron dipyrromethenes (BODIPY or BDP), aluminum porphyrin (AlTPP) and C60 is demonstrated. In the present strategy, the energy donor (BDP) and electron acceptor (C60) were axially positioned to the plane of AlTPP via the central metal. The structural integrity of the newly synthesized compounds and self-assembled systems were fully established using spectral, electrochemical and computational methods. Thermodynamic feasibility of energy transfer from 1BDP* to AlTPP and subsequent electron transfer from 1AlTPP* to generate BDP-AlTPPâ¢+-C60â¢- charge separated states was derived from free-energy calculations. Occurrence of ultrafast energy transfer from 1BDP* to AlTPP was established from studies involving steady-state and time-resolved emission, as well as femtosecond transient spectroscopic techniques. The BDP-AlTPPâ¢+-C60â¢- charge separated states persisted for several nanoseconds prior returning to the ground state.
ABSTRACT
Oligo(p-phenylenevinylene) (oPPV) wires of various lengths featuring pyridyls at one terminal and C60 moieties at the other, have been used as molecular building blocks in combination with porphyrins to construct a novel class of electron donor-acceptor architectures. These architectures, which are based on non-covalent, directional interactions between the zinc centers of the porphyrins and the pyridyls, have been characterized by nuclear magnetic resonance spectroscopy and mass spectrometry. Complementary physico-chemical assays focused on the interactions between electron donors and acceptors in the ground and excited states. No appreciable electron interactions were noted in the ground state, which was being probed by electrochemistry, absorption spectroscopy, etc.; the electron acceptors are sufficiently decoupled from the electron donors. In the excited state, a different picture evolved. In particular, steady-state and time-resolved fluorescence and transient absorption measurements revealed substantial electron donor-acceptor interactions. These led, upon photoexcitation of the porphyrins, to tunable intramolecular electron-transfer processes, that is, the oxidation of porphyrin and the reduction of C60. In this regard, the largest impact stems from a rather strong distance dependence of the total reorganization energy in stark contrast to the distance independence seen for covalently linked conjugates.
ABSTRACT
Two novel "spider-shaped" porphyrins, meso-tetraaryl-substituted 1PV-Por and zinc-metalated 1PV-Zn-Por, bearing four oligo(p-phenylenevinylene) (oPPV) pyridyl groups with long dodecyloxy chains on the phenyl groups, have been synthesized. The presence of four pyridyl groups in both porphyrins, which allow them to act as anchoring groups upon coordination to various Lewis acid sites, the conjugated oPPV bridges, which offer the possibility of electronic communication between the porphyrin core and the pyridyl groups, and the dodecyloxy groups, which offer the advantage of high solubility in a variety of organic solvents of different polarities and could prevent porphyrin aggregation, renders porphyrins 1PV-Por and 1PV-Zn-Por very promising sensitizers for dye-sensitized solar cells (DSSCs). Photophysical measurements, together with electrochemistry experiments and density functional theory calculations, suggest that both porphyrins have frontier molecular orbital energy levels that favor electron injection and dye regeneration in DSSCs. Solar cells sensitized by 1PV-Por and 1PV-Zn-Por were fabricated, and it was found that they show power conversion efficiencies (PCEs) of 3.28 and 5.12%, respectively. Photovoltaic measurements (J-V curves) together with incident photon-to-electron conversion efficiency spectra of the two cells reveal that the higher PCE value of the DSSC based on 1PV-Zn-Por is ascribed to higher short-circuit current (Jsc), open-circuit voltage (Voc), and dye loading values. Emission spectra and electrochemistry experiments suggest a greater driving force for injection of the photogenerated electrons into the TiO2 conduction band for 1PV-Zn-Por rather than its free-base analogue. Furthermore, electrochemical impedance spectroscopy measurements prove that the utilization of 1PV-Zn-Por as a sensitizer offers a high charge recombination resistance and, therefore, leads to a longer electron lifetime.