Mechanism of Single-Stranded DNA Activation of Recombinase Intein Splicing.

Inteins, or intervening proteins, are mobile genetic elements translated within host polypeptides and removed through protein splicing. This self-catalyzed process breaks two peptide bonds and rejoins the flanking sequences, called N- and C-exteins, with the intein scarlessly escaping the host protein. As these elements have traditionally been viewed as purely selfish genetic elements, recent work has demonstrated that the conditional protein splicing (CPS) of several naturally occurring inteins can be regulated by a variety of environmental cues relevant to the survival of the host organism or crucial to the invading protein function. The RadA recombinase from the archaeon Pyrococcus horikoshii represents an intriguing example of CPS, whereby protein splicing is inhibited by interactions between the intein and host protein C-extein. Single-stranded DNA (ssDNA), a natural substrate of RadA as well as signal that recombinase activity is needed by the cell, dramatically improves the splicing rate and accuracy. Here, we investigate the mechanism by which ssDNA exhibits this influence and find that ssDNA strongly promotes a specific step of the splicing reaction, cyclization of the terminal asparagine of the intein. Interestingly, inhibitory interactions between the host protein and intein that block splicing localize to this asparagine, suggesting that ssDNA binding alleviates this inhibition to promote splicing. We also find that ssDNA directly influences the position of catalytic nucleophiles required for protein splicing, implying that ssDNA promotes assembly of the intein active site. This work advances our understanding of how ssDNA accelerates RadA splicing, providing important insights into this intriguing example of CPS.

SufB intein of Mycobacterium tuberculosis as a sensor for oxidative and nitrosative stresses.

Inteins are mobile genetic elements that self-splice at the protein level. Mycobacteria have inteins inserted into several important genes, including those corresponding to the iron-sulfur cluster assembly protein SufB. Curiously, the SufB inteins are found primarily in mycobacterial species that are potential human pathogens. Here we discovered an exceptional sensitivity of Mycobacterium tuberculosis SufB intein splicing to oxidative and nitrosative stresses when expressed in Escherichia coli. This effect results from predisposition of the intein's catalytic cysteine residues to oxidative and nitrosative modifications. Experiments with a fluorescent reporter system revealed that reactive oxygen species and reactive nitrogen species inhibit SufB extein ligation by forcing either precursor accumulation or N-terminal cleavage. We propose that splicing inhibition is an immediate, posttranslational regulatory response that can be either reversible, by inducing precursor accumulation, or irreversible, by inducing N-terminal cleavage, which may potentially channel mycobacteria into dormancy under extreme oxidative and nitrosative stresses.

Structure of catalytically competent intein caught in a redox trap with functional and evolutionary implications.

Here we describe self-splicing proteins, called inteins, that function as redox-responsive switches in bacteria. Redox regulation was achieved by engineering a disulfide bond between the intein's catalytic cysteine and a cysteine in the flanking 'extein' sequence. This interaction was validated by an X-ray structure, which includes a transient splice junction. A natural analog of the designed system was identified in Pyrococcus abyssi, suggesting an unprecedented form of adaptive, post-translational regulation.

Homing endonuclease I-TevIII: dimerization as a means to a double-strand break.

Homing endonucleases are unusual enzymes, capable of recognizing lengthy DNA sequences and cleaving site-specifically within genomes. Many homing endonucleases are encoded within group I introns, and such enzymes promote the mobility reactions of these introns. Phage T4 has three group I introns, within the td, nrdB and nrdD genes. The td and nrdD introns are mobile, whereas the nrdB intron is not. Phage RB3 is a close relative of T4 and has a lengthier nrdB intron. Here, we describe I-TevIII, the H-N-H endonuclease encoded by the RB3 nrdB intron. In contrast to previous reports, we demonstrate that this intron is mobile, and that this mobility is dependent on I-TevIII, which generates 2-nt 3' extensions. The enzyme has a distinct catalytic domain, which contains the H-N-H motif, and DNA-binding domain, which contains two zinc fingers required for interaction with the DNA substrate. Most importantly, I-TevIII, unlike the H-N-H endonucleases described so far, makes a double-strand break on the DNA homing site by acting as a dimer. Through deletion analysis, the dimerization interface was mapped to the DNA-binding domain. The unusual propensity of I-TevIII to dimerize to achieve cleavage of both DNA strands underscores the versatility of the H-N-H enzyme family.

Localization, mobility and fidelity of retrotransposed Group II introns in rRNA genes.

We previously showed that the group II Lactococcus lactis Ll.LtrB intron could retrotranspose into ectopic locations on the genome of its native host. Two integration events, which had been mapped to unique sequences, were localized in the present study to separate copies of the six L.lactis 23S rRNA genes, within operon B or D. Although further movement within the bacterial chromosome was undetectable, the retrotransposed introns were able to re-integrate into their original homing site provided on a plasmid. This finding indicates not only that retrotransposed group II introns retain mobility properties, but also that movement occurs back into sequence that is heterologous to the sequence of the chromosomal location. Sequence analysis of the retrotransposed introns and the secondary mobility events back to the homing site showed that the introns retain sequence integrity. These results are illuminating, since the reverse transcriptase (RT) of the intron-encoded protein, LtrA, has no known proofreading function, yet the mobility events have a low error rate. Enzymatic digests were used to monitor sequence changes from the wild-type intron. The results indicate that retromobility events have approximately 10(-5) misincorporations per nucleotide inserted. In contrast to the high RT error rates for retroviruses that must escape host defenses, the infrequent mutations of group II introns would ensure intron spread through retention of sequences essential for mobility.

Coincidence of cleavage sites of intron endonuclease I-TevI and critical sequences of the host thymidylate synthase gene.

To maximize spread of their host intron or intein, many homing endonucleases recognize nucleotides that code for important and conserved amino acid residues of the target gene. Here, we examine the cleavage requirements for I-TevI, which binds a stretch of thymidylate synthase (TS) DNA that codes for functionally critical residues in the TS active site. Using an in vitro selection scheme, we identified two base-pairs in the I-TevI cleavage site region as important for cleavage efficiency. These were confirmed by comparison of I-TevI cleavage efficiencies on mutant and on wild-type substrates. We also showed that nicking of the bottom strand by I-TevI is not affected by mutation of residues surrounding the bottom-strand cleavage site, unlike other homing endonucleases. One of these two base-pairs is universally conserved in all TS sequences, and is identical with a previously identified cleavage determinant of I-BmoI, a related GIY-YIG endonuclease that binds a homologous stretch of TS-encoding DNA. The other base-pair is conserved only in a subset of TS genes that includes the I-TevI, but not the I-BmoI, target sequence. Both the I-TevI and I-BmoI cleavage site requirements correspond to functionally critical residues involved in an extensive hydrogen bond network within the TS active site. Remarkably, these cleavage requirements correlate with TS phylogeny in bacteria, suggesting that each endonuclease has individually adapted to efficiently cleave distinct TS substrates.

Intron-encoded homing endonuclease I-TevI also functions as a transcriptional autorepressor.

Customary binding sites of intron-encoded homing endonucleases lie within cognate intronless alleles, at the so-called homing sites. Here, we describe a novel, high-affinity binding site for I-TevI endonuclease, encoded within the group I td intron of phage T4. This site is an operator that overlaps the T4 late promoter, which drives I-TevI expression from within the td intron. I-TevI binds the operator and homing sites with equal affinity, and functions as a transcriptional autorepressor. Distinct sequence and spacing requirements of the catalytic domain result in reduced cleavage activity on operator DNA. Crystallographic studies showed that the overall interactions of the DNA-binding domain with the operator and homing sites are similar, but have some different hydrogen-bonding contacts. We present a model in which the flexibility in protein-DNA interactions allows I-TevI to bind variant intronless alleles to promote intron mobility while facilitating its function in autorepression, and thereby persistence in its host.

Importance of a single base pair for discrimination between intron-containing and intronless alleles by endonuclease I-BmoI.

Homing endonucleases initiate mobility of their host group I introns by binding to and cleaving lengthy recognition sequences that are typically centered on the intron insertion site (IS) of intronless alleles. Because the intron interrupts the endonucleases' recognition sequence, intron-containing alleles are immune to cleavage by their own endonuclease. I-TevI and I-BmoI are related GIY-YIG endonucleases that bind a homologous stretch of thymidylate synthase (TS)-encoding DNA but use different strategies to distinguish intronless from intron-containing substrates. I-TevI discriminates between substrates at the level of DNA binding, as its recognition sequence is centered on the intron IS. I-BmoI, in contrast, possesses a very asymmetric recognition sequence with respect to the intron IS, binds both intron-containing and intronless TS-encoding substrates, but efficiently cleaves only intronless substrate. Here, we show that I-BmoI is extremely tolerant of multiple substitutions around its cleavage sites and has a low specific activity. However, a single G-C base pair, at position -2 of a 39-base pair recognition sequence, is a major determinant for cleavage efficiency and distinguishes intronless from intron-containing alleles. Strikingly, this G-C base pair is universally conserved in phylogenetically diverse TS-coding sequences; this finding suggests that I-BmoI has evolved exquisite cleavage requirements to maximize the potential to spread to variant intronless alleles, while minimizing cleavage at its own intron-containing allele.