Molecular mechanism of flocculation self-recognition in yeast and its role in mating and survival.

UNLABELLED: We studied the flocculation mechanism at the molecular level by determining the atomic structures of N-Flo1p and N-Lg-Flo1p in complex with their ligands. We show that they have similar ligand binding mechanisms but distinct carbohydrate specificities and affinities, which are determined by the compactness of the binding site. We characterized the glycans of Flo1p and their role in this binding process and demonstrate that glycan-glycan interactions significantly contribute to the cell-cell adhesion mechanism. Therefore, the extended flocculation mechanism is based on the self-interaction of Flo proteins and this interaction is established in two stages, involving both glycan-glycan and protein-glycan interactions. The crucial role of calcium in both types of interaction was demonstrated: Ca(2+) takes part in the binding of the carbohydrate to the protein, and the glycans aggregate only in the presence of Ca(2+). These results unify the generally accepted lectin hypothesis with the historically first-proposed "Ca(2+)-bridge" hypothesis. Additionally, a new role of cell flocculation is demonstrated; i.e., flocculation is linked to cell conjugation and mating, and survival chances consequently increase significantly by spore formation and by introduction of genetic variability. The role of Flo1p in mating was demonstrated by showing that mating efficiency is increased when cells flocculate and by differential transcriptome analysis of flocculating versus nonflocculating cells in a low-shear environment (microgravity). The results show that a multicellular clump (floc) provides a uniquely organized multicellular ultrastructure that provides a suitable microenvironment to induce and perform cell conjugation and mating. IMPORTANCE: Yeast cells can form multicellular clumps under adverse growth conditions that protect cells from harsh environmental stresses. The floc formation is based on the self-interaction of Flo proteins via an N-terminal PA14 lectin domain. We have focused on the flocculation mechanism and its role. We found that carbohydrate specificity and affinity are determined by the accessibility of the binding site of the Flo proteins where the external loops in the ligand-binding domains are involved in glycan recognition specificity. We demonstrated that, in addition to the Flo lectin-glycan interaction, glycan-glycan interactions also contribute significantly to cell-cell recognition and interaction. Additionally, we show that flocculation provides a uniquely organized multicellular ultrastructure that is suitable to induce and accomplish cell mating. Therefore, flocculation is an important mechanism to enhance long-term yeast survival.

Characterization of polymer monolithic columns for small-molecule separations using total-pore-blocking conditions.

This study involves the investigation of the meso- and micropores in polymer monolithic materials and the performance characterization of polymer monoliths for the separation of small molecules. Pore-blocking experiments, that involve the blocking of the stagnant pores with a solvent which is immiscible with the mobile phase, were conducted to determine interstitial volumes of a commercially-available polymer monolithic column. After blocking the meso- and micropores a clear reduction in the column void time was observed. Using this approach, the internal porosity (defined as the sum of the meso- and micropores with respect to the volume of the monolithic material) was determined at 12.5%. Peak-dispersion measurements were conducted by applying reversed-phase (RP) conditions. The high plate-height values for small-molecule separations are mainly attributed to the large eddy-diffusion and mobile-phase mass-transfer contributions to band broadening, related to the inhomogeneous structure and presence of parabolic profiles in the macropores. The C-term contribution of early eluting (retained) compounds was higher than that of the late eluting compounds. This could be attributed to the low zone-retention factors of early-eluting compounds and consequently a large stationary-phase mass-transfer contribution. However, peak-dispersion measurements with blocked meso- and micropores carried out at RP conditions indicated that the Cs-contribution alone is likely not be the main cause of peak broadening. Finally, (1)H spin-spin (T2) relaxometry NMR measurements were conducted with water and ACN in the monolithic material.

Cryptogein-induced transcriptional reprogramming in tobacco is light dependent.

The fungal elicitor cryptogein triggers a light-dependent hypersensitive response in tobacco (Nicotiana tabacum). To assess the effect of light on this nonhost resistance in more detail, we studied various aspects of the response under dark and light conditions using the tobacco-cryptogein experimental system. Here, we show that light drastically alters the plant's transcriptional response to cryptogein, notably by dampening the induction of genes involved in multiple processes, such as ethylene biosynthesis, secondary metabolism, and glutathione turnover. Furthermore, chlorophyll fluorescence measurements demonstrated that quantum yield and functioning of the light-harvesting antennae decreased simultaneously, indicating that photoinhibition underlies the observed decreased photosynthesis and that photooxidative damage might be involved in the establishment of the altered response. Analysis of the isomer distribution of hydroxy fatty acids illustrated that, in the light, lipid peroxidation was predominantly due to the production of singlet oxygen. Differences in (reduced) glutathione concentrations and the rapid development of symptoms in the light when cryptogein was coinfiltrated with glutathione biosynthesis inhibitors suggest that glutathione might become a limiting factor during the cryptogein-induced hypersensitive response in the dark and that this response might be modified by an increased antioxidant availability in the light.

High-resolution peptide separations using nano-LC at ultra-high pressure.

We report on the optimization of nano-LC gradient separations of proteomic samples that vary in complexity. The gradient performance limits were visualized by kinetic plots depicting the gradient time needed to achieve a certain peak capacity, while using the maximum system pressure of 80 MPa. The selection of the optimal particle size/column length combination and corresponding gradient steepness was based on scouting the performance of 75 µm id capillary columns packed with 2, 3, and 5 µm fully porous silica C18 particles. At optimal gradient conditions, peak capacities up to 500 can be obtained within a 120 min gradient using 2 µm particle-packed capillary columns. Separations of proteomic samples including a cytochrome c tryptic digest, a bovine serum albumin tryptic digest, a six protein mix digest, and an Escherichia coli digest are demonstrated while operating at the kinetic-performance limit, i.e. using 2-µm packed columns, adjusting the column length and scaling the gradient steepness according to sample complexity. Finally, good run-to-run retention time stability (RSD values below 0.18%) was demonstrated applying ultra-high pressure conditions.

Visualization procedures for proteins and peptides on flat-bed monoliths and their effects on matrix-assisted laser-desorption/ionization time-of-flight mass spectrometric detection.

The present study concerns the application of visualization methods, i.e. coomassie-brilliant-blue-R staining (CBB-R), silver-nitrate staining, and fluorescamine labeling, and subsequent MALDI-MS analysis of intact proteins and peptides on the surface of flat-bed monoliths, intended for spatial two-dimensional chromatographic separations. The use of 100-µm thick macroporous poly(butyl methacrylate-co-ethylene dimethacrylate) flat-bed monoliths renders a fixation step obsolete, so that CBB-R and silver-nitrate staining and destaining could be achieved in 10-15 min as opposed to up to 24h, as is typical on 2D-PAGE gels. The detection limits remained comparable. The compatibility of the monolithic layer with subsequent MALDI-MS analysis of individual proteins and peptide spots was investigated with regards to mass accuracy, mass precision, resolution, and signal intensity. When comparing results from MALDI-MS analysis of proteins and peptides on a flat-bed monolith to results obtained directly on stainless-steel target plates, significant losses in mass precision, signal intensity, and an increased variation in resolution were observed. In addition, a loss in signal intensity up to two orders of magnitude was observed when using monolithic layers. After CCB-R and silver-nitrate staining and destaining to disrupt the protein-dye complexes no MALDI spectra with significant S/N ratios could be achieved. After fluorescamine labeling heterogeneous signals were observed, which resulted from a distribution in the number of fluorescence-labeled lysine groups and from the presence of labeled derivatives that had undergone condensation reactions.

A universal fixation method based on quaternary ammonium salts (RNAlater) for omics-technologies: Saccharomyces cerevisiae as a case study.

Genomics, transcriptomics, proteomics and fluxomics are powerful omics-technologies that play a major role in today's research. For each of these techniques good sample quality is crucial. Major factors contributing to the quality of a sample is the actual sampling procedure itself and the way the sample is stored directly after sampling. It has already been described that RNAlater can be used to store tissues and cells in a way that the RNA quality and quantity are preserved. In this paper, we demonstrate that quaternary ammonium salts (RNAlater) are also suitable to preserve and store samples from Saccharomyces cerevisiae for later use with the four major omics-technologies. Moreover, it is shown that RNAlater also preserves the cell morphology and the potential to recover growth, permitting microscopic analysis and yeast cell culturing at a later stage.

High-resolution separations of tryptic digest mixtures using core-shell particulate columns operated at 1,200 bar.

Combining two recent advances in instrumentation and column technology (ultra-high-pressure LC instruments and core-shell particles), the current peak-capacity generation limits in one-dimensional LC have been explored for the case of tryptic digest separations. To operate as close as possible to the Knox and Saleem limit of the particles, and hence to operate the 2.6 µm core-shell particles at their kinetic optimum, the separations were conducted in a coupled column systems at 1200 bar. Using coupled columns with a total length of 450 mm at 1,200 bar and applying 40 and 120 min gradients (t(G)/t(0)=17 and 52, respectively), peak capacities of n(c)=480 and 760 were measured. The kinetic performance was further improved by coupling six 150 mm long columns and applying 1,200 bar, yielding a flow rate close to the optimum of the van Deemter curve while scaling the gradient volume. At t(G)/t(0)=52 a peptide separation yielding a peak capacity of 1360 was achieved, applying a 480 min gradient. The observed increase of peak capacity with column length agrees well with the theoretical expectations based on the linear solvent strength (LSS) model.

The influence of microgravity on invasive growth in Saccharomyces cerevisiae.

This study investigates the effects of microgravity on colony growth and the morphological transition from single cells to short invasive filaments in the model eukaryotic organism Saccharomyces cerevisiae. Two-dimensional spreading of the yeast colonies grown on semi-solid agar medium was reduced under microgravity in the Σ1278b laboratory strain but not in the CMBSESA1 industrial strain. This was supported by the Σ1278b proteome map under microgravity conditions, which revealed upregulation of proteins linked to anaerobic conditions. The Σ1278b strain showed a reduced invasive growth in the center of the yeast colony. Bud scar distribution was slightly affected, with a switch toward more random budding. Together, microgravity conditions disturb spatially programmed budding patterns and generate strain-dependent growth differences in yeast colonies on semi-solid medium.

The N-terminal domain of the Flo1 flocculation protein from Saccharomyces cerevisiae binds specifically to mannose carbohydrates.

Saccharomyces cerevisiae cells possess a remarkable capacity to adhere to other yeast cells, which is called flocculation. Flocculation is defined as the phenomenon wherein yeast cells adhere in clumps and sediment rapidly from the medium in which they are suspended. These cell-cell interactions are mediated by a class of specific cell wall proteins, called flocculins, that stick out of the cell walls of flocculent cells. The N-terminal part of the three-domain protein is responsible for carbohydrate binding. We studied the N-terminal domain of the Flo1 protein (N-Flo1p), which is the most important flocculin responsible for flocculation of yeast cells. It was shown that this domain is both O and N glycosylated and is structurally composed mainly of ß-sheets. The binding of N-Flo1p to D-mannose, α-methyl-D-mannoside, various dimannoses, and mannan confirmed that the N-terminal domain of Flo1p is indeed responsible for the sugar-binding activity of the protein. Moreover, fluorescence spectroscopy data suggest that N-Flo1p contains two mannose carbohydrate binding sites with different affinities. The carbohydrate dissociation constants show that the affinity of N-Flo1p for mono- and dimannoses is in the millimolar range for the binding site with low affinity and in the micromolar range for the binding site with high affinity. The high-affinity binding site has a higher affinity for low-molecular-weight (low-MW) mannose carbohydrates and no affinity for mannan. However, mannan as well as low-MW mannose carbohydrates can bind to the low-affinity binding site. These results extend the cellular flocculation model on the molecular level.