ABSTRACT
BACKGROUND: Lignocellulosic biomass is recognized as a promising renewable feedstock for the production of biofuels. However, current methods for converting biomass into fermentable sugars are considered too expensive and inefficient due to the recalcitrance of the secondary cell wall. Biomass composition can be modified to create varieties that are efficiently broken down to release cell wall sugars. This study focused on identifying the key biomass components influencing plant cell wall recalcitrance that can be targeted for selection in sugarcane, an important and abundant source of biomass. RESULTS: Biomass composition and the amount of glucan converted into glucose after saccharification were measured in leaf and culm tissues from seven sugarcane genotypes varying in fiber composition after no pretreatment and dilute acid, hydrothermal and ionic liquid pretreatments. In extractives-free sugarcane leaf and culm tissue, glucan, xylan, acid-insoluble lignin (AIL) and acid-soluble lignin (ASL) ranged from 20 to 32%, 15% to 21%, 14% to 20% and 2% to 4%, respectively. The ratio of syringyl (S) to guaiacyl (G) content in the lignin ranged from 1.5 to 2.2 in the culm and from 0.65 to 1.1 in the leaf. Hydrothermal and dilute acid pretreatments predominantly reduced xylan content, while the ionic liquid (IL) pretreatment targeted AIL reduction. The amount of glucan converted into glucose after 26 h of pre-saccharification was highest after IL pretreatment (42% in culm and 63.5% in leaf) compared to the other pretreatments. Additionally, glucan conversion in leaf tissues was approximately 1.5-fold of that in culm tissues. Percent glucan conversion varied between genotypes but there was no genotype that was superior to all others across the pretreatment groups. Path analysis revealed that S/G ratio, AIL and xylan had the strongest negative associations with percent glucan conversion, while ASL and glucan content had strong positive influences. CONCLUSION: To improve saccharification efficiency of lignocellulosic biomass, breeders should focus on reducing S/G ratio, xylan and AIL content and increasing ASL and glucan content. This will be key for the development of sugarcane varieties for bioenergy uses.
ABSTRACT
Metal-organic frameworks (MOFs) are a class of hybrid materials with unique optical and electronic properties arising from rational self-assembly of the organic linkers and metal ions/clusters, yielding myriads of possible structural motifs. The combination of order and chemical tunability, coupled with good environmental stability of MOFs, are prompting many research groups to explore the possibility of incorporating these materials as active components in devices such as solar cells, photodetectors, radiation detectors, and chemical sensors. Although this field is only in its incipiency, many new fundamental insights relevant to integrating MOFs with such devices have already been gained. In this review, we focus our attention on the basic requirements and structural elements needed to fabricate MOF-based devices and summarize the current state of MOF research in the area of electronic, opto-electronic and sensor devices. We summarize various approaches to designing active MOFs, creation of hybrid material systems combining MOFs with other materials, and assembly and integration of MOFs with device hardware. Critical directions of future research are identified, with emphasis on achieving the desired MOF functionality in a device and establishing the structure-property relationships to identify and rationalize the factors that impact device performance.
ABSTRACT
Bismuth telluride nanoparticles (NPs) have been synthesized using a low-temperature wet-chemical approach from bismuth(III) oleate and tri-n-octylphosphine telluride. The size and shape of the NPs can be controlled by adjusting the temperature, reaction time, and nature of the surfactants and solvents. Aromatic hydrocarbons (toluene, xylenes) and ethers (phenyl- and benzyl-ether) favor the formation of stoichiometric Bi2Te3 NPs of platelike morphology, whereas the presence of oleylamine and 1-dodecanethiol yields Bi-rich Bi2Te3 spherical NPs. XRD, IR, SEM, TEM, and SAED techniques have been used to characterize the obtained products. We show that the surfactants can be efficiently removed from the surface of the NPs using a two-step process employing nitrosonium tetrafluoroborate and hydrazine hydrate. The surfactant-free NPs were further consolidated into high density pellets using cold-pressing and field-assisted sintering techniques. The sintered surfactant-free Bi2Te3 showed electrical and thermal properties comparable to Bi2Te3 materials processed through conventional solid state techniques, and greatly improved over other nanostructured Bi2Te3 materials synthesized by wet-chemical approaches.
ABSTRACT
There are several approaches being investigated to improve the efficiency of biomass conversion into fermentable sugars, including those that engineer the feedstocks to enhance digestibility. In this study it was evaluated the impact of genotype modifications of three mutants of Eucalyptus globulus L., and of the corresponding wild type on cellulose hydrolyzability before and after ionic liquid (IL) pretreatment. Both untreated and IL-treated samples were chemically characterized and tested for cellulose hydrolizability. Results obtained indicate that genetic modifications altered wood lignin-S/G ratio. This alteration resulted in a different hydrolyzability of cellulose for untreated samples, i.e. high lignin-S/G ratio produced low glucose yield (r=-0.97; P<0.03; n=4), but did not affect glucose yield after IL pretreatment. IL pretreated samples had increased glucose yields compared to that of untreated samples due to the modification of microcrystalline cellulose I to mixtures of more hydrolysable cellulose II and amorphous cellulose, and to the partial removal of the steric impediment, or removal of the lignin "sheath" protecting cellulose, to enzymes. The efficiency of the IL pretreatment used in this study does not appear to be affected by the S/G content of the E. globulus.
