Oxygen-Mediated (0D) Cs4PbX6 Formation during Open-Air Thermal Processing Improves Inorganic Perovskite Solar Cell Performance.

The desire to commercialize perovskite solar cells continues to mount, motivating the development of scalable production. Evaluations of the impact of open-air processing have revealed a variety of physical changes in the fabricated devices─with few changes having the capacity to be functionalized. Here, we highlight the beneficial role of ambient oxygen during the open-air thermal processing of metastable γ-CsPbI3-based perovskite thin films and devices. Physiochemical-sensitive probes elucidate oxygen intercalation and the formation of Pb-O bonds in the CsPbI3 crystal, entering via iodine vacancies at the surface, creating superoxide (O2-) through electron transfer reactions with molecular oxygen, which drives the formation of a zero-dimensional Cs4PbI6 capping layer during annealing (>330 °C). The chemical conversion permanently alters the film structure, helping to shield the subsurface perovskite from moisture and introduces lattice anchoring sites, stabilizing otherwise unstable γ-CsPbI3 films. This functional modification is demonstrated in γ-CsPbI2Br perovskite solar cells, boosting the operational stability and photoconversion efficiency of champion devices from 12.7 to 15.4% when annealed in dry air. Such findings prompt a reconsideration of glovebox-based perovskite solar cell research and establish a scenario where device fabrication can in fact greatly benefit from ambient oxygen.

Noble-Metal-Free High-Entropy Alloy Nanoparticles for Efficient Solar-Driven Photocatalytic CO2 Reduction.

Metal nanoparticle (NP) cocatalysts are widely investigated for their ability to enhance the performance of photocatalytic materials; however, their practical application is often limited by the inherent instability under light irradiation. This challenge has catalyzed interest in exploring high-entropy alloys (HEAs), which, with their increased entropy and lower Gibbs free energy, provide superior stability. In this study, 3.5 nm-sized noble-metal-free NPs composed of a FeCoNiCuMn HEA are successfully synthesized. With theoretic calculation and experiments, the electronic structure of HEA in augmenting the catalytic CO2 reduction has been uncovered, including the individual roles of each element and the collective synergistic effects. Then, their photocatalytic CO2 reduction capabilities are investigated when immobilized on TiO2. HEA NPs significantly enhance the CO2 photoreduction, achieving a 23-fold increase over pristine TiO2, with CO and CH4 production rates of 235.2 and 19.9 µmol g-1 h-1, respectively. Meanwhile, HEA NPs show excellent stability under simulated solar irradiation, as well high-energy X-ray irradiation. This research emphasizes the promising role of HEA NPs, composed of earth-abundant elements, in revolutionizing the field of photocatalysis.

A Universal Perovskite/C60 Interface Modification via Atomic Layer Deposited Aluminum Oxide for Perovskite Solar Cells and Perovskite-Silicon Tandems.

The primary performance limitation in inverted perovskite-based solar cells is the interface between the fullerene-based electron transport layers and the perovskite. Atomic layer deposited thin aluminum oxide (AlOX) interlayers that reduce nonradiative recombination at the perovskite/C60 interface are developed, resulting in >60 millivolts improvement in open-circuit voltage and 1% absolute improvement in power conversion efficiency. Surface-sensitive characterizations indicate the presence of a thin, conformally deposited AlOx layer, functioning as a passivating contact. These interlayers work universally using different lead-halide-based absorbers with different compositions where the 1.55 electron volts bandgap single junction devices reach >23% power conversion efficiency. A reduction of metallic Pb0 is found and the compact layer prevents in- and egress of volatile species, synergistically improving the stability. AlOX-modified wide-bandgap perovskite absorbers as a top cell in a monolithic perovskite-silicon tandem enable a certified power conversion efficiency of 29.9% and open-circuit voltages above 1.92 volts for 1.17 square centimeters device area.

Understanding and Mitigating Atomic Oxygen-Induced Degradation of Perovskite Solar Cells for Near-Earth Space Applications.

Combining high efficiency with good radiation tolerance, perovskite solar cells (PSCs) are promising candidates to upend expanding space photovoltaic (PV) technologies. Successful employment in a Near-Earth space environment, however, requires high resistance against atomic oxygen (AtOx). This work unravels AtOx-induced degradation mechanisms of PSCs with and without phenethylammonium iodide (PEAI) based 2D-passivation and investigates the applicability of ultrathin silicon oxide (SiO) encapsulation as AtOx barrier. AtOx exposure for 2 h degraded the average power conversion efficiency (PCE) of devices without barrier encapsulation by 40% and 43% (w/o and with 2D-PEAI-passivation) of their initial PCE. In contrast, devices with a SiO-barrier retained over 97% of initial PCE. To understand why 2D-PEAI passivated devices degrade faster than less efficient non-passivated devices, various opto-electrical and structural characterications are conducted. Together, these allowed to decouple different damage mechanisms. Notably, pseudo-J-V curves reveal unchanged high implied fill factors (pFF) of 86.4% and 86.2% in non-passivated and passivated devices, suggesting that degradation of the perovskite absorber itself is not dominating. Instead, inefficient charge extraction and mobile ions, due to a swiftly degrading PEAI interlayer are the primary causes of AtOx-induced device performance degradation in passivated devices, whereas a large ionic FF loss limits non-passivated devices.

Accelerated Redox Reactions Enable Stable Tin-Lead Mixed Perovskite Solar Cells.

The facile oxidation of Sn2+ to Sn4+ poses an inherent challenge that limits the efficiency and stability of tin-lead mixed (Sn-Pb) perovskite solar cells (PSCs) and all-perovskite tandem devices. In this work, we discover the sustainable redox reactions enabling self-healing Sn-Pb perovskites, where their intractable oxidation degradation can be recovered to their original state under light soaking. Quantitative and operando spectroscopies are used to investigate the redox chemistry, revealing that metallic Pb0 from the photolysis of perovskite reacts with Sn4+ to regenerate Pb2+ and Sn2+ spontaneously. Given the sluggish redox reaction kinetics, V3+ /V2+ ionic pair is designed as an effective redox shuttle to accelerate the recovery of Sn-Pb perovskites from oxidation. The target Sn-Pb PSCs enabled by V3+ /V2+ ionic pair deliver an improved power conversion efficiency (PCE) of 21.22 % and excellent device lifespan, retaining nearly 90 % of its initial PCE after maximum power point tracking under light for 1,000 hours.

Interfacial alloying between lead halide perovskite crystals and hybrid glasses.

The stellar optoelectronic properties of metal halide perovskites provide enormous promise for next-generation optical devices with excellent conversion efficiencies and lower manufacturing costs. However, there is a long-standing ambiguity as to whether the perovskite surface/interface (e.g. structure, charge transfer or source of off-target recombination) or bulk properties are the more determining factor in device performance. Here we fabricate an array of CsPbI3 crystal and hybrid glass composites by sintering and globally visualise the property-performance landscape. Our findings reveal that the interface is the primary determinant of the crystal phases, optoelectronic quality, and stability of CsPbI3. In particular, the presence of a diffusion "alloying" layer is discovered to be critical for passivating surface traps, and beneficially altering the energy landscape of crystal phases. However, high-temperature sintering results in the promotion of a non-stoichiometric perovskite and excess traps at the interface, despite the short-range structure of halide is retained within the alloying layer. By shedding light on functional hetero-interfaces, our research offers the key factors for engineering high-performance perovskite devices.

Interface passivation for 31.25%-efficient perovskite/silicon tandem solar cells.

Silicon solar cells are approaching their theoretical efficiency limit of 29%. This limitation can be exceeded with advanced device architectures, where two or more solar cells are stacked to improve the harvesting of solar energy. In this work, we devise a tandem device with a perovskite layer conformally coated on a silicon bottom cell featuring micrometric pyramids-the industry standard-to improve its photocurrent. Using an additive in the processing sequence, we regulate the perovskite crystallization process and alleviate recombination losses occurring at the perovskite top surface interfacing the electron-selective contact [buckminsterfullerene (C60)]. We demonstrate a device with an active area of 1.17 square centimeters, reaching a certified power conversion efficiency of 31.25%.

Near-Field Localization of the Boson Peak on Tantalum Films for Superconducting Quantum Devices.

Superconducting circuits are among the most advanced quantum computing technologies; however, their performance is limited by losses found in surface oxides and disordered materials. In this work, we demonstrate the identification and spatial localization of a near-field signature of loss centers on tantalum films using terahertz scattering-type scanning near-field optical microscopy. By utilizing terahertz nanospectroscopy, we observe a localized excess vibrational mode around 0.5 THz and identify this resonance as the boson peak, a signature of amorphous materials. Grazing-incidence wide-angle X-ray scattering reveals that oxides on freshly solvent-cleaned samples are amorphous, whereas crystalline phases emerge after aging in air. Through nanoscale localization of defect centers, our findings provide valuable insights for the optimization of fabrication procedures for new low-loss superconducting circuits.

Single-particle optical study on the effect of chloride post-treatment of MAPbI3 nano/microcrystals.

Surface passivation by post-treatment with methylammonium chloride (MACl) is regarded as a promising strategy to suppress surface defects in organic-inorganic lead halide perovskites and elevate the efficiency of solar cells based on these materials. However, traditional MACl post-treatment methods often impede the performance of the final device, due to the creation of additional unwanted defects. Herein, we report a novel approach for chloride post-treatment by applying a mixed ethanol/toluene solvent and validate its beneficial effect on the structure, composition, and optical properties of methylammonium lead iodide nano/microcrystals and related photosensitive devices. An optimized (mild) Cl content improves the crystallinity, enhances photoluminescence (PL) intensity, provides longer PL lifetimes, and induces brighter and longer ON-states in single-particle emission trajectories. On top of a reduction in the population percentage of crystals showing gradual photodegradation, our Cl-treatment method even leads to photobrightening. Additionally, the extent of carrier communication throughout spatially distant nanodomains enhances after MACl-based post-modification. Our results demonstrate that surface-bound Cl significantly reduces the trap density induced by under-coordinated lead ions or iodide vacancies and reveal the importance of a careful consideration of the applied Cl content to avoid the generation of high-bandgap MAPbCl3 heterojunctions upon excessive Cl treatment. Importantly, significant trap passivation upon MACl treatment translates into a more stable and elevated photocurrent in the corresponding photodetector device. We anticipate these findings will be beneficial for designing durable, high-performance lead halide perovskite photonic devices.

Tethered Small-Molecule Acceptors Simultaneously Enhance the Efficiency and Stability of Polymer Solar Cells.

For polymer solar cells (PSCs), the mixture of polymer donors and small-molecule acceptors (SMAs) is fine-tuned to realize a favorable kinetically trapped morphology and thus a commercially viable device efficiency. However, the thermodynamic relaxation of the mixed domains within the blend raises concerns related to the long-term operational stability of the devices, especially in the record-holding Y-series SMAs. Here, a new class of dimeric Y6-based SMAs tethered with differential flexible spacers is reported to regulate their aggregation and relaxation behavior. In their polymer blends with PM6, it is found that they favor an improved structural order relative to that of Y6 counterpart. Most importantly, the tethered SMAs show large glass transition temperatures to suppress the thermodynamic relaxation in mixed domains. For the high-performing dimeric blend, an unprecedented open circuit voltage of 0.87 V is realized with a conversion efficiency of 17.85%, while those of regular Y6-base devices only reach 0.84 V and 16.93%, respectively. Most importantly, the dimer-based device possesses substantially reduced burn-in efficiency loss, retaining more than 80% of the initial efficiency after operating at the maximum power point under continuous illumination for 700 h. The tethering approach provides a new direction to develop PSCs with high efficiency and excellent operating stability.

An embedded interfacial network stabilizes inorganic CsPbI3 perovskite thin films.

The black perovskite phase of CsPbI3 is promising for optoelectronic applications; however, it is unstable under ambient conditions, transforming within minutes into an optically inactive yellow phase, a fact that has so far prevented its widespread adoption. Here we use coarse photolithography to embed a PbI2-based interfacial microstructure into otherwise-unstable CsPbI3 perovskite thin films and devices. Films fitted with a tessellating microgrid are rendered resistant to moisture-triggered decay and exhibit enhanced long-term stability of the black phase (beyond 2.5 years in a dry environment), due to increasing the phase transition energy barrier and limiting the spread of potential yellow phase formation to structurally isolated domains of the grid. This stabilizing effect is readily achieved at the device level, where unencapsulated CsPbI3 perovskite photodetectors display ambient-stable operation. These findings provide insights into the nature of phase destabilization in emerging CsPbI3 perovskite devices and demonstrate an effective stabilization procedure which is entirely orthogonal to existing approaches.

Simultaneous photocatalytic H2 generation and organic synthesis over crystalline-amorphous Pd nanocube decorated Cs3Bi2Br9.

Cs3Bi2Br9 decorated with crystalline-amorphous Pd nanocubes as cocatalysts is reported to photocatalytically coproduce ca. 1400 µmol h-1 g-1 of H2 and benzaldehyde from the selective benzyl alcohol oxidation. This route offers an alternative for photocatalytic H2 generation using metal halide perovskites under mild conditions.

Fluorinated Perylene-Diimides: Cathode Interlayers Facilitating Carrier Collection for High-Performance Organic Solar Cells.

Organic solar cells (OSCs) have experienced rapid progress with the innovation of near-infrared (NIR)-absorbing small-molecular acceptors (SMAs), while the unique electronic properties of the SMAs raise new challenges in relation to cathode engineering for effective electron collection. To address this issue, two fluorinated perylene-diimides (PDIs), PDINN-F and PDINN-2F, are synthesized by a simple fluorination method, for application as cathode interlayer (CIL) materials. The two bay-fluorinated PDI-based CILs possess a lower lowest unoccupied molecular orbital (LUMO) energy level of ≈-4.0 eV, which improves the energy level alignment at the NIR-SMAs (such as BTP-eC9)/CIL for a favorable electron extraction efficiency. The monofluorinated PDINN-F shows higher electron mobility and better improved interfacial compatibility. The PDINN-F-based OSCs with PM6:BTP-eC9 as active layer exhibit an enhanced fill factor and larger short-circuit current density, leading to a high power conversion efficiency (PCE) exceeding 18%. The devices with PDINN-F CIL retain more than 80% of their initial PCE after operating at the maximum power point under continuous illumination for 750 h. This work prescribes a facile, cost-effective, and scalable method for the preparation of stable, high-performance fluorinated CILs, and instilling promise for the NIR-SMAs-based OSCs moving forward.

Terbium-Doped and Dual-Passivated γ-CsPb(I1- x Brx )3 Inorganic Perovskite Solar Cells with Improved Air Thermal Stability and High Efficiency.

Realizing photoactive and thermodynamically stable all-inorganic perovskite solar cells (PSCs) remains a challenging task within halide perovskite photovoltaic (PV) research. Here, a dual strategy for realizing efficient inorganic mixed halide perovskite PV devices based on a terbium-doped solar absorber, that is, CsPb1- x Tbx I2 Br, is reported, which undertakes a bulk and surface passivation treatment in the form of CsPb1- x Tbx I2 Br quantum dots, to maintain a photoactive γ-phase under ambient conditions and with significantly improved operational stability. Devices fabricated from these air-processed perovskite thin films exhibit an air-stable power conversion efficiency (PCE) that reaches 17.51% (small-area devices) with negligible hysteresis and maintains >90% of the initial efficiency when operating for 600 h under harsh environmental conditions, stemming from the combined effects of the dual-protection strategy. This approach is further examined within large-area PSC modules (19.8 cm2 active area) to realize 10.94% PCE and >30 days ambient stability, as well as within low-bandgap γ-CsPb0.95 Tb0.05 I2.5 Br0.5 (Eg  = 1.73 eV) materials, yielding 19.01% (18.43% certified) PCE.

Site-Sensitive Selective CO2 Photoreduction to CO over Gold Nanoparticles.

We demonstrate a new case of materials-gene engineering to precisely design photocatalysts with the prescribed properties. Based on theoretical calculations, a phase-doping strategy was proposed to regulate the pathways of CO2 conversion over Au nanoparticles (NPs) loaded TiO2 photocatalysts. As a result, the thermodynamic bottleneck of CO2 -to-CO conversion is successfully unlocked by the incorporation of stable twinning crystal planes into face-centered cubic (fcc) phase Au NPs. Compared to bare pristine TiO2 , the activity results showed that the loading of regular fcc-Au NPs raised the CO production by 18-fold but suppressed the selectivity from 84 % to 75 %, whereas Au NPs with twinning (110) and (100) facets boosted the activity by nearly 40-fold and established near unity CO selectivity. This enhancement is shown to originate from a beneficial shift in the surface reactive site energetics arising at the twinned stacking fault, whereby both the CO reaction energy and desorption energy were significantly reduced.

Photothermal Suzuki Coupling Over a Metal Halide Perovskite/Pd Nanocube Composite Catalyst.

The development of improved catalysts capable of performing the Suzuki coupling reaction has attracted considerable attention. Recent findings have shown that the use of photoactive catalysts improves the performance, while the reaction mechanism and temperature-dependent performance of such systems are still under debate. Herein, we report Pd nanocubes/CsPbBr3 as an efficient catalyst for the photothermal Suzuki reaction. The photo-induced and thermal contribution to the overall catalytic performance has been investigated. Light controls the activity at temperatures around and below 30 °C, while thermal catalysis determines the reactivity at higher temperatures. The Pd/CsPbBr3 catalyst exhibits 11 times higher activity than pure CsPbBr3 at 30 °C due to reduced activation barrier and facilitated charge carrier dynamics. Furthermore, the alkoxide radicals (R-O-) for the Suzuki reaction are experimentally and theoretically confirmed, and photogenerated holes are proven to be crucial for cleaving C-B bonds of phenylboronic acids to drive the reaction. This work prescribes a general strategy to study photothermal catalysis and offers a mechanistic guideline for photothermal Suzuki reactions.

Metal Halide Perovskite Based Heterojunction Photocatalysts.

With fascinating photophysical properties and a strong potential to utilize solar energy, metal halide perovskites (MHPs) have become a prominent feature within photocatalysis research. However, the effectiveness of single MHP photocatalysts is relatively poor. The introduction of a second component to form a heterojunction represents a well-established route to accelerate carrier migration and boost reaction rates, thus increasing the photoactivity. Recently, there have been several scientific advances related to the design of MHP-based heterojunction photocatalysts, including Schottky, type II, and Z-scheme heterojunctions. In this Review, we systematically discuss and critically appraise recent developments in MHP-based heterojunction photocatalysis. In addition, the techniques for identifying the type of active heterojunctions are evaluated and we conclude by briefly outlining the ongoing challenges and future directions for promising photocatalysts based on MHP heterojunctions.

Solar-to-Chemical Fuel Conversion via Metal Halide Perovskite Solar-Driven Electrocatalysis.

Sunlight is an abundant and clean energy source, the harvesting of which could make a significant contribution to society's increasing energy demands. Metal halide perovskites (MHP) have recently received attention for solar fuel generation through photocatalysis and solar-driven electrocatalysis. However, MHP photocatalysis is limited by low solar energy conversion efficiency, poor stability, and impractical reaction conditions. Compared to photocatalysis, MHP solar-driven electrocatalysis not only exhibits higher solar conversion efficiency but also is more stable when operating under practical reaction conditions. In this Perspective, we outline three leading types of MHP solar-driven electrocatalysis device technologies now in the research spotlight, namely, (1) photovoltaic-electrochemical (PV-EC), (2) photovoltaic-photoelectrochemical (PV-PEC), and (3) photoelectrochemical (PEC) approaches for solar-to-fuel reactions, including water-splitting and the CO2 reduction reaction. In addition, we compare each technology to show their relative technical advantages and limitations and highlight promising research directions for the rapidly emerging scientific field of MHP-based solar-driven electrocatalysis.

Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters.

Molecular additives are widely utilized to minimize non-radiative recombination in metal halide perovskite emitters due to their passivation effects from chemical bonds with ionic defects. However, a general and puzzling observation that can hardly be rationalized by passivation alone is that most of the molecular additives enabling high-efficiency perovskite light-emitting diodes (PeLEDs) are chelating (multidentate) molecules, while their respective monodentate counterparts receive limited attention. Here, we reveal the largely ignored yet critical role of the chelate effect on governing crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses. Specifically, we discover that the chelate effect enhances lead-additive coordination affinity, enabling the formation of thermodynamically stable intermediate phases and inhibiting halide coordination-driven perovskite nucleation. The retarded perovskite nucleation and crystal growth are key to high crystal quality and thus efficient electroluminescence. Our work elucidates the full effects of molecular additives on PeLEDs by uncovering the chelate effect as an important feature within perovskite crystallization. As such, we open new prospects for the rationalized screening of highly effective molecular additives.

Trojans That Flip the Black Phase: Impurity-Driven Stabilization and Spontaneous Strain Suppression in γ-CsPbI3 Perovskite.

The technological progress and widespread adoption of all-organic CsPbI3 perovskite devices is hampered by its thermodynamic instability at room temperature. Because of its inherent tolerance toward deep trap formation, there has been no shortage to exploring which dopants can improve the phase stability. While the relative size of the dopant is important, an assessment of the literature suggests that its relative size and impact on crystal volume do not always reveal what will beneficially shift the phase transition temperature. In this perspective, we analyze the changes in crystal symmetry of CsPbI3 perovskite as it transforms from a thermodynamically stable high-temperature cubic (α) structure into its distorted low-temperature tetragonal (ß) and unstable orthorhombic (γ) perovskite structures. Quantified assessment of the symmetry-adapted strains which are introduced due to changes in temperature and composition show that the stability of γ-CsPbI3 is best rationalized from the point of view of crystal symmetry. In particular, improved thermal-phase stability is directly traced to the suppression of spontaneous strain formation and increased crystal symmetry at room temperature.