ABSTRACT
Novel 1,8-naphthalimide-based fluorescent probes NI-1 and NI-2 were designed and screened for use as chemosensors for detection of heavy metal ions. Two moieties, methylpyridine (NI-1) and hydroxyphenyl (NI-2), were attached via piperazine at the C-4 position of the napthalimide core resulting in a notable effect on their spectroscopic properties. NI-1 and NI-2 are pH sensitive and show an increase in fluorescence intensity at around 525 nm (switch "on") in the acidic environment, with pKa values at 4.98 and 2.91, respectively. Amongst heavy metal ions only Cu2+ and Hg2+ had a significant effect on the spectroscopic properties. The fluorescence of NI-1 is quenched in the presence of either Cu2+ or Hg2+ which is attributed to the formation of 1:1 metal-ligand complexes with binding constants of 3.6 × 105 and 3.9 × 104, respectively. The NI-1 chemosensor can be used for the quantification of Cu2+ ions in sub-micromolar quantities, with a linear range from 250 nM to 4.0 µM and a detection limit of 1.5 × 10-8 M. The linear range for the determination of Hg2+ is from 2 µM to 10 µM, with a detection limit of 8.8 × 10-8 M. Conversely, NI-2 behaves like a typical photoinduced electron transfer (PET) sensor for Hg2+ ions. Here, the formation of a complex with Hg2+ (binding constant 8.3 × 103) turns the green fluorescence of NI-2 into the "on" state. NI-2 showed remarkable selectivity towards Hg2+ ions, allowing for determination of Hg2+ concentration over a linear range of 1.3 µM to 25 µM and a limit of detection of 4.1 × 10-7 M.
ABSTRACT
In this work, a series of novel 1,2,3-triazolyl-coumarin hybrid systems were designed as potential antitumour agents. The structural modification of the coumarin ring was carried out by Cu(I)-catalysed Huisgen 1,3-dipolar cycloaddition of 7-azido-4-methylcoumarin and terminal aromatic alkynes to obtain 1,4-disubstituted 1,2,3-triazolyl-coumarin conjugates 2a-g, bis(1,2,3-triazolyl-coumarin)benzenes 2h-i and coumarin-1,2,3-triazolyl-benzazole hybrids 4a-b. The newly synthesised hybrid molecules were investigated for in vitro antitumour activity against five human cancer cell lines, colon carcinoma HCT116, breast carcinoma MCF-7, lung carcinoma H 460, human T-lymphocyte cells CEM, cervix carcinoma cells HeLa, as well as human dermal microvascular endothelial cells (HMEC-1). Most of these compounds showed moderate to pronounced cytotoxic activity, especially towards MCF-7 cell lines with IC50 = 0.3-32 µM. In addition, compounds 2a-i and 4a-b were studied by UV-Vis absorption and fluorescence spectroscopy and their basic photophysical parameters were determined.
ABSTRACT
This work presents a systematic evaluation of 2-amino, 5-amino and 2,5-diamino substituted benzimidazo[1,2-a]quinoline-6-carbonitriles as novel pH probes with a potential application in pH sensing materials or as H+ fluoroionophores in bulk optode membranes. The study was carried out by varying the length, type and position of amino substituents in ten fluorescent dyes with the same benzimidazo[1,2-a]quinoline-6-carbonitrile core. The photophysical and acid-base properties of the dyes were investigated by the UV/Vis absorption and fluorescence spectroscopies, and interpreted by the electronic structure DFT calculations. pH sensing mechanisms and structure-property relations affecting the fluorescence response were discussed through a detailed analysis of the piperidine substituted derivatives 1-4. Push-pull donor-acceptor interactions stimulate strong fluorescence in the visible spectral range (up to Φâ¯=â¯0.65 for 7) and induce significant changes in the photophysical properties associated with the acid-base equilibria (up to a 50-fold increase in the fluorescence intensity). pKa values in aqueous and mixed solutions (v/v H2O:EtOH 99:1, 50:50), appear suitable for monitoring acidic pH in solution. The most promising candidates were immobilised in thin polymer matrices by the spin coating technique to form fluorescent sensing materials - optodes, and examined as novel pH-sensitive fluoroionophores. In the liquid membrane environment, dyes exhibited significant increase of the apparent pKas by almost 4 units. Bright and blue emissive thin films showed pH response and dynamic range around pKaâ¯=â¯5, making them suitable for a wide range of optical sensing applications.
ABSTRACT
A simple, low-cost paper-based potassium ion-selective optode that exhibits fully reversible sensing properties is presented. A classic optode formulation consisting of valinomycin as the ionophore and a lipophilic pH indicator has been successfully transferred to a paper substrate and characterised in a flow-through cell with reflectometric optical detection. The optode exhibits high repeatability, reversibility, and stability and can detect potassium in the physiologically relevant concentration range from 10-4 to 10-1 M. This new paper-based optode shows high potential for general application in paper microfluidic systems and for integration into wearable systems for perspiration monitoring due to its reversible and repeatable response. In general, we have demonstrated that ionophore-based optical sensors on paper can successfully be used for continuous ion-concentration monitoring.
ABSTRACT
Heterocyclic donor-π-acceptor molecular systems based on an N,N-dimethylamino phenylacrylonitrile benzimidazole skeleton have been characterised and are proposed for potential use in sensing applications. The benzimidazole moiety introduces a broad spectrum of useful multifunctional properties to the system including electron accepting ability, pH sensitivity and compatibility with biomolecules. The photophysical characterisation of the prototropic forms of these chromophores has been carried out in both solution and on immobilisation in polymer films. The experimental results are further supported by computational determination of pKa values. It is noticed that compound 3 forms nanoaggregates in aqueous solutions with aggregation-induced emission (AIE) at 600nm. All the systems demonstrate spectral pH sensitivity in acidic media which shifts towards near-neutral values upon immobilisation in polymer films or upon aggregation in an aqueous environment (compound 3). The structure-property relationships of these functional chromophores, involving their spectral characteristics, acid-base equilibria, pKa values and aggregation effects have been determined. Potential applications of the molecules as pH and biomolecular sensors are proposed based on their pH sensitivity and AIE properties.
Subject(s)
Acrylonitrile/chemistry , Benzimidazoles/chemistry , Fluorescent Dyes/chemistry , Protons , Water/chemistry , Animals , Benzimidazoles/chemical synthesis , Cattle , DNA/chemistry , Hydrogen-Ion Concentration , Polymers/chemistry , Solutions , Spectrometry, FluorescenceABSTRACT
Wireless chemical sensors are used as analytical devices in homeland defence, home-based healthcare, food logistics and more generally for the Sensor Internet of Things (SIoT). Presented here is a battery-powered and highly portable credit-card size potentiostat that is suitable for performing mobile and wearable amperometric electrochemical measurements with seamless wireless data transfer to mobile computing devices. The mobile electrochemical analytical system has been evaluated in the laboratory with a model redox system - the reduction of hexacyanoferrate(III) - and also with commercially available enzymatic blood-glucose test-strips. The potentiostat communicates wirelessly with mobile devices such as tablets or Smartphones by near-field communication (NFC) or with personal computers by radio-frequency identification (RFID), and thus provides a solution to the 'missing link' in connectivity that often exists between low-cost mobile and wearable chemical sensors and ubiquitous mobile computing products. The mobile potentiostat has been evaluated in the laboratory with a set of proof-of-concept experiments, and its analytical performance compared with a commercial laboratory potentiostat (R(2)=0.9999). These first experimental results demonstrate the functionality of the wireless potentiostat and suggest that the device could be suitable for wearable and point-of-sample analytical measurements. We conclude that the wireless potentiostat could contribute significantly to the advancement of mobile chemical sensor research and adoption, in particular for wearable sensors in healthcare and sport physiology, for wound monitoring and in mobile point-of-sample diagnostics as well as more generally as a part of the Sensor Internet of Things.
Subject(s)
Biosensing Techniques/instrumentation , Chemistry Techniques, Analytical/instrumentation , Electrochemistry/instrumentation , Wireless Technology , Electrodes , Equipment Design , Ferricyanides/chemistry , Glucose/analysis , Hydrodynamics , Radio WavesABSTRACT
Instrumental approaches to remotely and wirelessly monitoring chemical species are increasingly needed. Together with the electronic developments, efforts to optimize and validate the performance of these new devices are required. In this work, the analytical performance of a recently developed potentiometer-radiofrequency tag connected to ion-selective electrodes is evaluated. This credit card sized and extremely low power consumption device yield results that are comparable to those obtained with more sophisticated, lab-based tools. Advantages such as portability and autonomy, together with unique features, such as the ability to be read through the walls in a closed vessel are demonstrated. Future perspectives opened by this new generation of devices, such as their use in wearable devices and in decentralized settings are discussed.
ABSTRACT
Solid-state optical sensor membranes based on immobilised chromogenic radicals for the assessment of antioxidant activity have been studied. Two stable lipophilic chromogenic radicals, DPPH (2,2-diphenyl-1-picrylhydrazyl radical) and galvinoxyl radical, GV, (2,6-di-tert-butyl-alpha-(3,5-di-tert-butyl-oxo-2,5-cyclohexadien-1-ylidene)-p-tolyloxy radical), were immobilised in plasticised PVC films and screened for suitability as indicators of antioxidative activity. The spectrophotometric characterisation of the polymer films containing immobilised free radicals was performed, and the response of the immobilised free radicals toward standard antioxidants was studied. It has been demonstrated that the immobilised radicals retain their reactivity towards antioxidants and the results suggest that the reactivity of immobilised radicals is comparable to standard solution-based DPPH assays. Polymer films containing immobilised DPPH radical respond to standard antioxidants in aqueous solutions by changing colour irreversibly from purple (absorption maximum at 520nm) to yellow. The initial slopes of the response curves to the phenolic antioxidant gallic acid, obtained in the 1-50mM concentration range, gave a linear calibration plot in a 1min exposure cuvette test. The polymer films were used to screen antioxidative activity of beverage and food samples known to contain antioxidants, such as black and green tea, coffee, red wine, fruit juice, olive oil and sunflower oil. It has been demonstrated that a rapid and simple qualitative screening test of untreated samples is possible using a test strip based on immobilised DPPH radical.