A gold nanocluster/MIL-100(Fe) bimodal nanovector for the therapy of inflammatory disease through attenuation of Toll-like receptor signaling.

A better understanding of the molecular and cellular events involved in the inflammation process has opened novel perspectives in the treatment of inflammatory diseases, particularly through the development of well-designed nanomedicines. Here we describe the design of a novel class of anti-inflammatory nanomedicine (denoted as Au@MIL) synthesized through a one-pot, cost-effective and green approach by coupling a benchmark mesoporous iron(III) carboxylate metal organic framework (MOF) (i.e. MIL-100(Fe)) and glutathionate protected gold nanoclusters (i.e. Au25SG18 NCs). This nano-carrier exhibits low toxicity and excellent colloidal stability combined with the high loading capacity of the glucocorticoid dexamethasone phosphate (DexP) whose pH-dependent delivery was observed. The drug loaded Au@MIL nanocarrier shows high anti-inflammatory activity due to its capacity to specifically hinder inflammatory cell growth, scavenge intracellular reactive oxygen species (ROS) and downregulate pro-inflammatory cytokine secretion. In addition, this formulation has the capacity to inhibit the Toll-like receptor (TLR) signaling cascade namely the nuclear factor kappa B (NF-κB) and the interferon regulatory factor (IRF) pathways. This not only provides a new avenue for the nanotherapy of inflammatory diseases but also enhances our fundamental knowledge of the role of nanoMOF based nanomedicine in the regulation of innate immune signaling.

Interfacing metal organic frameworks with polymers or carbon-based materials: from simple to hierarchical porous and nanostructured composites.

In the past few years, metal organic frameworks (MOFs) have been assembled with (bio)polymers and a series of carbon-based materials (graphene, graphene oxide, carbon nanotubes, carbon quantum dots, etc.) leading to a wide range of composites differing in their chemical composition, pore structure and functionality. The objective was mainly to overcome the limitations of MOFs in terms of mechanical properties, chemical stability and processability while imparting novel functionality (electron conductivity, (photo)catalytic activity, etc.) and hierarchical porosity. These composites were considered for numerous applications including gas/liquid adsorption and separation, (photo)catalysis, biomedicine, energy storage, conversion and so on. The performance of such composites depends strongly on their microstructural and physico-chemical properties which are mainly driven by the chemical strategies used to design and process such composites. In this perspective article, we propose to cover this topic and provide a useful survey of recent progress in the synthesis and design of MOFs-carbon material composites. This article will describe the development of composites with increasing complexity in terms of porous architecture, spatial structuration and organisation, and functionality.

Metal-organic frameworks for the capture of α-pinene traces.

A dual computational/experimental approach enabled ranking of the performance of a series of MOFs for α-pinene capture in terms of affinity and uptake. UiO-66(Zr) is demonstrated to be a good candidate for adsorbing α-pinene at sub-ppm levels, while MIL-125(Ti)-NH2 shows ideal performances for abating α-pinene at concentrations encountered in indoor air.

Hierarchical superparamagnetic metal-organic framework nanovectors as anti-inflammatory nanomedicines.

Among a plethora of drug nanocarriers, biocompatible nanoscale metal-organic frameworks (nanoMOFs) with a large surface area and an amphiphilic internal microenvironment have emerged as promising drug delivery platforms, mainly for cancer therapy. However, their application in biomedicine still suffers from shortcomings such as a limited chemical and/or colloidal stability and/or toxicity. Here, we report the design of a hierarchically porous nano-object (denoted as USPIO@MIL) combining a benchmark nanoMOF (that is, MIL-100(Fe)) and ultra-small superparamagnetic iron oxide (USPIO) nanoparticles (that is, maghemite) that is synthesized through a one-pot, cost-effective and environmentally friendly protocol. The synergistic coupling of the physico-chemical and functional properties of both nanoparticles confers to these nano-objects valuable features such as high colloidal stability, high biodegradability, low toxicity, high drug loading capacity as well as stimuli-responsive drug release and superparamagnetic properties. This bimodal MIL-100(Fe)/maghemite nanocarrier once loaded with anti-tumoral and anti-inflammatory drugs (doxorubicin and methotrexate) shows high anti-inflammatory and anti-tumoral activities. In addition, the USPIO@MIL nano-object exhibits excellent relaxometric properties and its applicability as an efficient contrast agent for magnetic resonance imaging is herein demonstrated. This highlights the high potential of the maghemite@MOF composite integrating the functions of imaging and therapy as a theranostic anti-inflammatory formulation.

In Operando Spectroscopic Ellipsometry Investigation of MOF Thin Films for the Selective Capture of Acetic Acid.

The emission of polar volatile organic compounds (VOCs) is a major worldwide concern of air quality and equally impacts the preservation of cultural heritage (CH). The challenge is to design highly efficient adsorbents able to selectively capture traces of VOCs such as acetic acid (AA) in the presence of relative humidity (RH) normally found at storage in museums (40-80%). Although the selective capture of VOCs over water is still challenging, metal-organic frameworks (MOFs) possess highly tunable features (Lewis, Bronsted, or redox metal sites, functional groups, hydrophobicity, etc.) suitable to selectively capture a large variety of VOCs. In this context, we have explored the adsorption efficiency of a series of MOFs thin films (ZIF-8(Zn), MIL-101(Cr), and UiO-66(Zr)-2CF3) for the selective capture of AA based on a UV/vis and FT-IR spectroscopic ellipsometry in operando study (2-6% of relative pressure of AA under 40% of RH), namely conditions close to the realistic environmental storage conditions of cultural artifacts. For that purpose, optical quality thin films of MOFs were prepared by dip-coating, and their AA adsorption capacity and selectivity were evaluated under humid conditions by measuring the variation of the refractive index as a function of the vapor pressures while the chemical nature of the coadsorbed analytes (water and AA) was identified by FT-IR ellipsometry. While thin films of ZIF-8(Zn) strongly degraded upon exposure to AA/water vapors, films of MIL-101(Cr) and UiO-66(Zr)-2CF3 present a high chemical stability under those conditions. It was shown that MIL-101(Cr) presents a high AA adsorption capacity due to its high pore volume but exhibits a poor AA adsorption selectivity under humid conditions. In contrast, UiO-66(Zr)-2CF3 was shown to overpass MIL-101(Cr) in terms of AA/H2O adsorption selectivity and AA adsorption/desorption cycling stability because of its high hydrophobic character, suitable pore size for adequate confinement, and specific interactions.

Growth of Fe-BDC Metal-Organic Frameworks onto Functionalized Si (111) Surfaces.

The realization of metal-organic framework (MOF) layers onto solid surfaces is a prerequisite for their integration into devices. This work reports the direct growth of Fe3+ /benzene di-carboxylate MOFs onto functionalized silicon surfaces, compatible with a wide range of MOF synthesis conditions. The co-nucleation and growth of different crystalline phases are evidenced, whose coverage depends on the surface chemistry and/or the solution composition. Three structural phases - the cubic MIL-101(Fe), a hexagonal phase with a structure close to MOF-235 and a MIL-53(Fe) with a monoclinic symmetry - are identified through characteristic crystal shapes and their structural parameters inferred from X-Ray Diffraction. In addition to the oriented growth of 3D crystallites, the formation of two-dimensional MIL-101 nano-crystallites or thin layers/islands exhibiting extended monocrystalline domains with (111) texture is also demonstrated through high-resolution atomic force microscopy. Post-synthesis treatments reveal a weak adhesion of the hexagonal phase, indicating a different surface anchoring.

MIL-101(Cr) MOF as an Effective Siloxane Sensor.

Volatile methylsiloxanes (VMSs) are common silicone degradation byproducts that cause serious concern for the contamination of sensitive electronics and optics, among others. With the goal of fast, online detection of VMS, we herein highlight the mesoporous MIL-101(Cr) MOF as a promising mass sensing layer for integration with a quartz crystal microbalance (QCM), using an in-house modified gravimetric adsorption system capable of achieving extremely low concentrations of siloxane D4 (down to 0.04 ppm), targeting applications for monitoring in indoor spaces and spacecraft. Our developed MIL-101(Cr)@QCM sensor achieves near-perfect reversibility with no hysteresis alongside excellent repeatability over cycling and fast response/recovery times under 1 min. We attribute this capability to optimum host/guest interactions as uncovered through molecular simulations.

Robust ionic liquid@MOF composite as a versatile superprotonic conductor.

A highly performing proton conducting composite was prepared through the impregnation of EMIMCl ionic liquid in the mesoporous MIL-101(Cr)-SO3H MOF. The resulting EMIMCl@MIL-101(Cr)-SO3H composite displays high thermal and chemical stability, alongside retention of a high amount of EMIMCl even at temperatures as high as 500 K, as well as under moisture conditions. Remarkably, this composite exhibits outstanding proton conductivity not only at the anhydrous state (σ473 K = 1.5 × 10-3 S cm-S) but also under humidity (σ(343 K/60%-80%RH) ≥ 0.10 S cm-1) conditions. This makes EMIMCl@MIL-101(Cr)-SO3H a unique candidate to act as a solid state proton conductor for PEMFC applications under versatile conditions.

Formation of a Single-Crystal Aluminum-Based MOF Nanowire with Graphene Oxide Nanoscrolls as Structure-Directing Agents.

An innovative strategy is proposed to synthesize single-crystal nanowires (NWs) of the Al3+ dicarboxylate MIL-69(Al) MOF by using graphene oxide nanoscrolls as structure-directing agents. MIL-69(Al) NWs with an average diameter of 70±20 nm and lengths up to 2 µm were found to preferentially grow along the [001] crystallographic direction. Advanced characterization methods (electron diffraction, TEM, STEM-HAADF, SEM, XPS) and molecular modeling revealed the mechanism of formation of MIL-69(Al) NWs involving size-confinement and templating effects. The formation of MIL-69(Al) seeds and the self-scroll of GO sheets followed by the anisotropic growth of MIL-69(Al) crystals are mediated by specific GO sheets/MOF interactions. This study delivers an unprecedented approach to control the design of 1D MOF nanostructures and superstructures.

Enzyme Encapsulation in Mesoporous Metal-Organic Frameworks for Selective Biodegradation of Harmful Dye Molecules.

Microperoxidase-8, a small, peroxidase-type enzyme was immobilized into nanoparticles of the mesoporous and ultra-stable metal-organic framework (MOF) MIL-101(Cr). The immobilized enzyme fully retained its catalytic activity and exhibited enhanced resistance to acidic conditions. The biocatalyst was reusable and showed a long-term stability. By exploiting the properties of the MOF's framework, we demonstrated, for the first time, that the MOF matrix could act in synergy with the enzyme (Microperoxidase-8) and enhance selectivity the oxidation reaction of dyes. The oxidation rate of the harmful negatively charged dye (methyl orange) was significantly increased after enzyme immobilization, probably as a result of the pre-concentration of the methyl orange reactant owing to a charge matching between this dye and the MOF.

A phase transformable ultrastable titanium-carboxylate framework for photoconduction.

Porous titanium oxide materials are attractive for energy-related applications. However, many suffer from poor stability and crystallinity. Here we present a robust nanoporous metal-organic framework (MOF), comprising a Ti12O15 oxocluster and a tetracarboxylate ligand, achieved through a scalable synthesis. This material undergoes an unusual irreversible thermally induced phase transformation that generates a highly crystalline porous product with an infinite inorganic moiety of a very high condensation degree. Preliminary photophysical experiments indicate that the product after phase transformation exhibits photoconductive behavior, highlighting the impact of inorganic unit dimensionality on the alteration of physical properties. Introduction of a conductive polymer into its pores leads to a significant increase of the charge separation lifetime under irradiation. Additionally, the inorganic unit of this Ti-MOF can be easily modified via doping with other metal elements. The combined advantages of this compound make it a promising functional scaffold for practical applications.

Metal-Organic Frameworks for Cultural Heritage Preservation: The Case of Acetic Acid Removal.

The removal of low concentrations of acetic acid from indoor air at museums poses serious preservation problems that the current adsorbents cannot easily address owing to their poor affinity for acetic acid and/or their low adsorption selectivity versus water. In this context, a series of topical water-stable metal-organic frameworks (MOFs) with different pore sizes, topologies, hydrophobic characters, and functional groups was explored through a joint experimental-computational exploration. We demonstrate how a subtle combination of sufficient hydrophobicity and optimized host-guest interactions allows one to overcome the challenge of capturing traces of this very polar volatile organic compound in the presence of humidity. The optimal capture of acetic acid was accomplished with MOFs that do not show polar groups in the inorganic node or have lipophilic but polar (e.g., perfluoro) groups functionalized to the organic linkers, that is, the best candidates from the list of explored MOFs are MIL-140B and UiO-66-2CF3. These two MOFs present the appropriate pore size to favor a high degree of confinement, together with organic spacers that allow an enhancement of the van der Waals interactions with the acetic acid. We establish in this work that MOFs can be a viable solution to this highly challenging problem in cultural heritage protection, which is a new field of application for this type of hybrid materials.

Influence of Filler Pore Structure and Polymer on the Performance of MOF-Based Mixed-Matrix Membranes for CO2 Capture.

To gain insight into the influence of metal-organic framework (MOF) fillers and polymers on membrane performance, eight different composites were studied by combining four MOFs and two polymers. MOF materials (NH2 -MIL-53(Al), MIL-69(Al), MIL-96(Al) and ZIF-94) with various chemical functionalities, topologies, and dimensionalities of porosity were employed as fillers, and two typical polymers with different permeability-selectivity properties (6FDA-DAM and Pebax) were selected as matrices. The best-performing MOF-polymer composites were prepared by loading 25 wt % of MIL-96(Al) as filler, which improved the permeability and selectivity of 6FDA-DAM to 32 and 10 %, while for Pebax they were enhanced to 25 and 18 %, respectively. The observed differences in membrane performance in the separation of CO2 from N2 are explained on the basis of gas solubility, diffusivity properties, and compatibility between the filler and polymer phases.

Titanium coordination compounds: from discrete metal complexes to metal-organic frameworks.

Owing to their promise in photocatalysis and optoelectronics, titanium based metal-organic frameworks (MOFs) are one of the most appealing classes of MOFs reported to date. Nevertheless, Ti-MOFs are still very scarce because of their challenging synthesis associated with a poor degree of control of their chemistry and crystallization. This review aims at giving an overview of the recent progress in this field focusing on the most relevant existing titanium coordination compounds as well as their promising photoredox properties. Not only Ti-MOFs but also Ti-oxo-clusters will be discussed and particular interest will be dedicated to highlight the different successful synthetic strategies allowing to overcome the still "unpredictable" reactivity of titanium ions, particularly to afford crystalline porous coordination polymers.

Synthesis Optimization, Shaping, and Heat Reallocation Evaluation of the Hydrophilic Metal-Organic Framework MIL-160(Al).

The energy-storage capacities of a series of water-stable porous metal-organic frameworks, based on high-valence metal cations (Al3+ , Fe3+ , Cr3+ , Ti4+ , Zr4+ ) and polycarboxylate linkers, were evaluated under the typical conditions of seasonal energy-storage devices. The results showed that the microporous hydrophilic Al-dicarboxylate MIL-160(Al) exhibited one of the best performances. To assess the properties of this material for space-heating applications on a laboratory pilot scale with an open reactor, a new synthetic route involving safer, greener conditions was developed. This led to the production of MIL-160(Al) on a 400 g scale, before the material was shaped into pellets through a wet-granulation method. The material exhibited a very high energy-storage capacity for a physical-sorption material (343 Wh kg-1 ), which is in full agreement with the predicted value.

Toward an Understanding of the Microstructure and Interfacial Properties of PIMs/ZIF-8 Mixed Matrix Membranes.

A study integrating advanced experimental and modeling tools was undertaken to characterize the microstructural and interfacial properties of mixed matrix membranes (MMMs) composed of the zeolitic imidazolate framework ZIF-8 nanoparticles (NPs) and two polymers of intrinsic microporosity (PIM-1 and PIM-EA-TB). Analysis probed both the initial ZIF-8/PIM-1 colloidal suspensions and the final hybrid membranes. By combination of dynamic light scattering (DLS) and transmission electron microscopy (TEM) analytical and imaging techniques with small-angle X-ray scattering (SAXS), the colloidal suspensions were shown to consist mainly of two distinct kinds of particles, namely, polymer aggregates of about 200 nm in diameter and densely packed ZIF-8-NP aggregates of a few 100 nm in diameter with a 3 nm thick polymer top-layer. Such aggregates are likely to impart the granular texture of ZIF-8/PIMs MMMs as shown by SEM-XEDS analysis. At the molecular scale, modeling studies showed that the surface coverage of ZIF-8 NPs by both polymers appears not to be optimal with the presence of microvoids at the interfaces that indicates only a moderate compatibility between the polymer and ZIF-8. This study shows that the microstructure of MMMs results from a complex interplay between the ZIF-8/PIM compatibility, solvent, surface chemistry of the ZIF-8 NPs, and the physicochemical properties of the polymers such as molecular structure and rigidity.

Design of Laccase-Metal Organic Framework-Based Bioelectrodes for Biocatalytic Oxygen Reduction Reaction.

Laccase in combination with 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as a mediator is a well-known bioelectrocatalyst for the 4-electron oxygen reduction reactions (ORR). The present work deals with the first exploitation of mesoporous iron(III) trimesate-based metal organic frameworks (MOF) MIL-100(Fe) (MIL stands for materials from Institut Lavoisier) as a new and efficient immobilization matrix of laccase for the building up of biocathodes for ORR. First, the immobilization of ABTS in the pores of the MOF was studied by combining micro-Raman spectroscopy, X-ray powder diffraction (XRPD), and N2 porosimetry. The ABTS-MIL-100(Fe)-based modified electrode presents excellent properties in terms of charge transfer kinetics and ionic conductivity as well as a very stable and reproducible electrochemical response, showing that MIL-100(Fe) provides a suitable and stabilizing microenvironment for electroactive ABTS molecules. In a second step, laccase was further immobilized on the MIL-100(Fe)-ABTS matrix. The Lac-ABTS-MIL-100(Fe)-CIE bioelectrode presents a high electrocatalytic current density of oxygen reduction and a reproducible electrochemical response characterized by a high stability over a long period of time (3 weeks). These results constitute a significant advance in the field of laccase-based bioelectrocatalysts for ORR. According to our work, it appears that the high catalytic efficiency of Lac-ABTS-MIL-100(Fe) for ORR may result from a synergy of chemical and catalytic properties of MIL-100(Fe) and laccase.

Single-Molecule Magnet Behavior of Individual Polyoxometalate Molecules Incorporated within Biopolymer or Metal-Organic Framework Matrices.

The chemically and structurally highly stable polyoxometalate (POM) single-molecule magnet (SMM) [(FeW9 O34 )2 Fe4 (H2 O)2 ](10-) (Fe6 W18 ) has been incorporated by direct or post-synthetic approaches into a biopolymer gelatin (Gel) matrix and two crystalline metal-organic frameworks (MOFs), including one diamagnetic (UiO-67) and one magnetic (MIL-101(Cr)). Integrity of the POM in the Fe6 W18 @Gel, Fe6 W18 @UiO-67 and Fe6 W18 @MIL-101(Cr) composites was confirmed by a set of complementary techniques. Magnetic studies indicate that the POMs are magnetically well isolated. Remarkably, in Fe6 W18 @Gel, the SMM properties of the embedded molecules are close to those of the crystals, with clear quantum tunneling steps in the hysteresis loops. For the Fe6 W18 @UiO-67 composite, the molecules retain their SMM properties, the energy barrier being slightly reduced in comparison to the crystalline material and the molecules exhibiting a tunneling rate of magnetization significantly faster than for Fe6 W18 @Gel. When Fe6 W18 is introduced into MIL-101(Cr), the width of the hysteresis loops is drastically reduced and the quantum tunneling steps are smeared out because of the magnetic interactions between the antiferromagnetic matrix and the SMM guest molecules.

Design of metal organic framework-enzyme based bioelectrodes as a novel and highly sensitive biosensing platform.

Nanocomposites combining the mesoporous iron(iii) trimesate MIL-100(Fe) (MIL: Matériaux Institut Lavoisier) and platinum nanoparticles (Pt-NPs) have been used as immobilization matrices of glucose oxidase (GOx). Due to the physico-chemical properties of Pt-NPs (electroactivity) and MIL-100(Fe) (high specific surface area and pore volume, biocompatibility), the resulting GOx-MIL-100(Fe)-PtNP bioelectrode exhibits excellent electrocatalytic performances for glucose detection. This novel glucose biosensor presents a high sensitivity of 71 mA M-1 cm-2 under optimum conditions and a low limit of detection of 5 µM with low response time (<5 s). In contrast, substitution of iron by chromium or aluminum in MIL-100 leads to a much lower sensitivity and higher response time values, suggesting that the iron centres of MIL-100(Fe) may be involved in a synergistic effect which indeed enhances the catalytic oxidation of glucose and biosensor activity. Thus, this work extends the scope of MOF nanoparticles with engineered cores and surface to the field of highly sensitive, durable glucose biosensors.

A rare example of a porous Ca-MOF for the controlled release of biologically active NO.

A 1D-microporous 3D calcium tetracarboxylate MOF has been solvothermally prepared and its structure solved from single crystal data. It exhibits coordinatively unsaturated Ca(2+) Lewis acid sites able to trap and deliver nitric oxide at a biological level.