High temperature corrosion and oxide scale formation of nickel in molten NaOH at various basicity levels.

The corrosion behavior of alloy Ni 201 in molten sodium hydroxide (NaOH) at 600 °C was investigated at varying basicity levels of the molten NaOH. The ability for Ni 201 to form passivating oxides was investigated after immersion tests varying from 70 to 340 h under atmospheres of argon and argon with different partial pressure of water. Morphology and thicknesses of the corrosion products were characterized by Scanning Electron Microscopy (SEM) and crystallography of the corrosion products by X-ray Diffraction (XRD). Dynamic polarizations were made to investigate the effects of basicity and electrochemical potential. The results showed that Ni 201 corroded at a reduced rate in molten acidic NaOH compared to neutral NaOH due to the formation of NiO. The oxide scales formed on Ni 201 in acidic NaOH were shown to grow non-parabolically and did not result in full corrosion protection as the oxide scales showed crack development over time.

Comparison of Gold Yield with Traditional Amalgamation and Direct Smelting in Artisanal Small-Scale Gold Mining in Uganda.

BACKGROUND: The amalgamation method used by artisanal small-scale miners is the single largest source of global mercury emission. The goal of the 'Free Your Mine' project is to stop mercury use in artisanal and small-scale mining. OBJECTIVES: The aim of the present study was to compare gold recovery and time consumption between the amalgamation method and direct smelting, using borax for smelting under standardized conditions. MATERIALS AND METHODS: This was an experimental study in a pragmatic setting in the mining community of Tiira, Uganda. Standardized amounts of gold ore of equal quality were processed with the local amalgamation method and with the Philippine mercury-free method as practiced by miners from Benguet in the Philippines, and the gold yield and time consumption were compared. RESULTS: The amalgamation method took 53 minutes and recovered 1.0 g of pure gold. The miners used 4 g of mercury in the processing. The Philippine mercury-free method took 62 minutes and recovered 1.4 g of pure gold. CONCLUSIONS: The Philippine mercury-free method recovered 40% more gold than the amalgamation method but took 9 minutes longer. The Philippine mercury-free method is a viable alternative to amalgamation. COMPETING INTERESTS: The authors declare no competing financial interests.

Introduction of Mercury-Free Gold Extraction to Small-Scale Miners in the Cabo Delgado Province in Mozambique.

BACKGROUND: The majority of small-scale gold miners worldwide, including those in Mozambique, use mercury to extract gold. Over the last fifty years, gold production from small-scale mining has been accelerating and consequently the amount of mercury released to the environment has increased dramatically, causing major global health problems. In 2018, a team from the Danish non-governmental organization Diálogos introduced the mercury-free gold extraction method in the Cabo Delgado province in Mozambique in the villages of Waqueia and Nanlia. OBJECTIVES: The objective of this project was to teach local miners this method to reduce mercury pollution. An additional objective was to compare the local gold extraction method and the mercury-free gold extraction method in terms of gold recovery. The hypothesis was that the level of gold recovery would be higher with the mercury-free method compared to the locally used amalgamation method. MATERIALS AND METHODS: An experimental study comparing the two gold extraction methods was carried out where local miners processed gold-bearing ore using their standard procedures with the amalgamation method and the Diálogos team processed an equivalent amount of gold-bearing ore with the mercury-free gold extraction method. The tests were carried out once at each mining site. RESULTS: Under even circumstances in a controlled setting, the mercury-free method yielded up to 78% more gold than the amalgamation method normally used by the miners. CONCLUSIONS: The strengths of the mercury-free gold extraction method include low costs, higher gold yield, benign environmental impact, legality and needed chemicals are more readily available compared with the amalgamation method. However, the mercury-free method may be more time consuming than the amalgamation method, especially for beginners. Borax is typically available in developed urban areas, as it is commonly used in the welding industry and by jewelers, but can be hard to find in more remote villages. COMPETING INTERESTS: The authors declare no competing financial interests.