Tuning Ion Mobility in Lithium Argyrodite Solid Electrolytes via Entropy Engineering.

The development of improved solid electrolytes (SEs) plays a crucial role in the advancement of bulk-type solid-state battery (SSB) technologies. Recently, multicomponent or high-entropy SEs are gaining increased attention for their advantageous charge transport and (electro)chemical properties. However, a comprehensive understanding of how configurational entropy affects ionic conductivity is largely lacking. Herein we have investigated a series of multication-substituted lithium argyrodites with the general formula Li6+x[M1aM2bM3cM4d]S5I, with M being P, Si, Ge, and Sb. Structure-property relationships related to ion mobility were probed using a combination of diffraction techniques, solid-state nuclear magnetic resonance spectroscopy, and charge-transport measurements. We present, to the best of our knowledge, the first experimental evidence of a direct correlation between occupational disorder in the cationic host lattice and lithium transport. By controlling the configurational entropy through the composition, high bulk ionic conductivities up to 18 mS cm-1 at room temperature were achieved for optimized lithium argyrodite compositions. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors via entropy engineering, unlocking the compositional limitations for the design of advanced electrolytes and opening up new avenues in the field.

Synthetic Tailoring of Ionic Conductivity in Multicationic Substituted, High-Entropy Lithium Argyrodite Solid Electrolytes.

Superionic conductors are key components of solid-state batteries (SSBs). Multicomponent or high-entropy materials, offering a vast compositional space for tailoring properties, have recently attracted attention as novel solid electrolytes (SEs). However, the influence of synthetic parameters on ionic conductivity in compositionally complex SEs has not yet been investigated. Herein, the effect of cooling rate after high-temperature annealing on charge transport in the multicationic substituted lithium argyrodite Li6.5[P0.25Si0.25Ge0.25Sb0.25]S5I is reported. It is demonstrated that a room-temperature ionic conductivity of ∼12 mS cm-1 can be achieved upon cooling at a moderate rate, superior to that of fast- and slow-cooled samples. To rationalize the findings, the material is probed using powder diffraction, nuclear magnetic resonance and X-ray photoelectron spectroscopy combined with electrochemical methods. In the case of moderate cooling rate, favorable structural (bulk) and compositional (surface) characteristics for lithium diffusion evolve. Li6.5[P0.25Si0.25Ge0.25Sb0.25]S5I is also electrochemically tested in pellet-type SSBs with a layered Ni-rich oxide cathode. Although delivering larger specific capacities than Li6PS5Cl-based cells at high current rates, the lower (electro)chemical stability of the high-entropy Li-ion conductor led to pronounced capacity fading. The research data indicate that subtle changes in bulk structure and surface composition strongly affect the electrical conductivity of high-entropy lithium argyrodites.

High-Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All-Solid-State Batteries.

Superionic solid electrolytes (SEs) are essential for bulk-type solid-state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge-transport properties, however a thorough understanding of how configurational entropy (ΔSconf ) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen-rich lithium argyrodites with the general formula Li5.5 PS4.5 Clx Br1.5-x (0≤x≤1.5). Using neutron powder diffraction and 31 P magic-angle spinning nuclear magnetic resonance spectroscopy, the S2- /Cl- /Br- occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li-ion dynamics, leading to a room-temperature ionic conductivity of 22.7 mS cm-1 (9.6 mS cm-1 in cold-pressed state) for Li5.5 PS4.5 Cl0.8 Br0.7 (ΔSconf =1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li5.5 PS4.5 Cl0.8 Br0.7 SE allowed for stable cycling of single-crystal LiNi0.9 Co0.06 Mn0.04 O2 (s-NCM90) composite cathodes in SSB cells, emphasizing that dual-substituted lithium argyrodites hold great promise in enabling high-performance electrochemical energy storage.

Transition-metal interdiffusion and solid electrolyte poisoning in all-solid-state batteries revealed by cryo-TEM.

Using scanning transmission electron microscopy, along with electron energy loss spectroscopy, under cryogenic conditions, we demonstrate transition-metal dissolution from a layered Ni-rich oxide cathode material and subsequent diffusion into the bulk of a lithium thiophosphate solid electrolyte during electrochemical cycling. This problem has previously only been considered for liquid-electrolyte-based batteries.

Probing the Lithium Substructure and Ionic Conductivity of the Solid Electrolyte Li4PS4I.

In search of high-performance solid electrolytes, various materials have been discovered in the past, approaching or even exceeding the ionic conductivity of conventional liquid electrolytes. Among the reported classes of superionic electrolytes for solid-state battery applications, lithium thiophosphates appear to be the most promising owing to their high ionic conductivity and mechanical softness. A recent example is the Li4PS4I phase (P4/nmm). Surprisingly, this material shows a comparatively low ionic conductivity at room temperature ranging from 10-4 to 10-5 S cm-1 despite having favorable structural characteristics. Because of discrepancies between experiment and theory regarding the Li-ion conductivity and polymorphism in Li4PS4I, we herein examine the crystal structure over a broad temperature range using ex situ and in situ X-ray and neutron powder diffraction techniques. We demonstrate the absence of polymorphic transitions, with a lithium redistribution at low temperatures though, and confirm the relatively poor room-temperature ionic conductivity despite the presence of a three-dimensional (3D) percolation network for facile charge transport.

Influence of synthesis parameters on crystallization behavior and ionic conductivity of the Li4PS4I solid electrolyte.

Superionic solid electrolytes are key to the development of advanced solid-state Li batteries. In recent years, various materials have been discovered, with ionic conductivities approaching or even exceeding those of carbonate-based liquid electrolytes used in high-performance Li-ion batteries. Among the different classes of inorganic solid electrolytes under study, lithium thiophosphates are one of the most promising due to their high Li-ion conductivity at room temperature and mechanical softness. Here, we report about the effect of synthesis parameters on the crystallization behavior and charge-transport properties of Li4PS4I. We show that thermally induced crystallization of Li4PS4I (P4/nmm), starting from the glassy phase 1.5Li2S-0.5P2S5-LiI, adversely affects the material's conductivity. However, both conductivity and crystallization temperature can be significantly increased by applying pressure during the preparation.

Effect of surface carbonates on the cyclability of LiNbO3-coated NCM622 in all-solid-state batteries with lithium thiophosphate electrolytes.

While still premature as an energy storage technology, bulk solid-state batteries are attracting much attention in the academic and industrial communities lately. In particular, layered lithium metal oxides and lithium thiophosphates hold promise as cathode materials and superionic solid electrolytes, respectively. However, interfacial side reactions between the individual components during battery operation usually result in accelerated performance degradation. Hence, effective surface coatings are required to mitigate or ideally prevent detrimental reactions from occurring and having an impact on the cyclability. In the present work, we examine how surface carbonates incorporated into the sol-gel-derived LiNbO3 protective coating on NCM622 [Li1+x(Ni0.6Co0.2Mn0.2)1-xO2] cathode material affect the efficiency and rate capability of pellet-stack solid-state battery cells with ß-Li3PS4 or argyrodite Li6PS5Cl solid electrolyte and a Li4Ti5O12 anode. Our research data indicate that a hybrid coating may in fact be beneficial to the kinetics and the cycling performance strongly depends on the solid electrolyte used.

Li2ZrO3-Coated NCM622 for Application in Inorganic Solid-State Batteries: Role of Surface Carbonates in the Cycling Performance.

All-inorganic solid-state batteries (SSBs) currently attract much attention as next-generation high-density energy-storage technology. However, to make SSBs competitive with conventional Li-ion batteries, several obstacles and challenges must be overcome, many of which are related to interface stability issues. Protective coatings can be applied to the electrode materials to mitigate side reactions with the solid electrolyte, with lithium transition metal oxides, such as LiNbO3 or Li2ZrO3, being well established in research. In addition, it has been recognized lately that carbonates incorporated into the coating may also positively affect the interface stability. In this work, we studied the effect that surface carbonates in case of Li2ZrO3-coated Li1+x(Ni0.6Co0.2Mn0.2)1-xO2 (NCM622) cathode material have on the cyclability of pellet stack SSB cells with Li6PS5Cl and Li4Ti5O12 as a solid electrolyte and an anode, respectively. Both carbonate-rich and carbonate-poor hybrid coatings were produced by altering the synthesis conditions. The best cycling performance was achieved for carbonate-deficient Li2ZrO3-coated NCM622 due to decreased degradation of the argyrodite solid electrolyte at the interfaces, as determined by ex situ X-ray photoelectron spectroscopy and in situ differential electrochemical mass spectrometry. The results emphasize the importance of tailoring the composition and nature of protective coatings to improve the cyclability of bulk SSBs.

Li7GeS5Br-An Argyrodite Li-Ion Conductor Prepared by Mechanochemical Synthesis.

In recent years, the search for glassy and ceramic Li+ superionic conductors has received significant attention, mainly due to the renaissance of interest in all-solid-state batteries. Here, we report the mechanochemical synthesis of metastable Li7GeS5Br, which is, to the best of our knowledge, the first compound of the Li2S-GeS2-LiBr system. Applying combined synchrotron X-ray diffraction and neutron powder diffraction, we show Li7GeS5Br to crystallize in the F4̅3m space group and to be isostructural with argyrodite-type Li6PS5Br, but with a distinct difference in the S2-/Br- site disorder (and improved anodic stability). Electrochemical impedance spectroscopy indicates an electrical (ionic) conductivity of 0.63 mS cm-1 at 298 K, with an activation energy for conduction of 0.43 eV. This is supported by temperature-dependent 7Li pulsed-field gradient-nuclear magnetic resonance spectroscopy measurements. Overall, the results demonstrate that novel (metastable) argyrodite-type solid electrolytes can be prepared via mechanochemistry that are not accessible by conventional solid-state synthesis routes.

Gas Evolution in Lithium-Ion Batteries: Solid versus Liquid Electrolyte.

Gas evolution in conventional lithium-ion batteries using Ni-rich layered oxide cathode materials presents a serious issue that is responsible for performance decay and safety concerns, among others. Recent findings revealed that gas evolution also occurred in bulk-type solid-state batteries. To further clarify the effect that the electrolyte has on gassing, we report in this work-to the best of our knowledge-the first study comparing gas evolution in lithium-ion batteries with NCM622 cathode material and different electrolyte types, specifically solid (ß-Li3PS4 and Li6PS5Cl) versus liquid (LP57). Using isotopic labeling, acid titration, and in situ gas analysis, we show the presence of O2 and CO2 evolution in both systems, albeit with different cumulative amounts, and possible SO2 evolution for the lithium thiophosphate-based cells. Our results demonstrate the importance of considering gas evolution in solid-state batteries, especially the formation and release of highly corrosive SO2, due to side reactions with the electrolyte.

Influence of electronically conductive additives on the cycling performance of argyrodite-based all-solid-state batteries.

All-solid-state batteries (SSBs) are attracting widespread attention as next-generation energy storage devices, potentially offering increased power and energy densities and better safety than liquid electrolyte-based Li-ion batteries. Significant research efforts are currently underway to develop stable and high-performance bulk-type SSB cells by optimizing the cathode microstructure and composition, among others. Electronically conductive additives in the positive electrode may have a positive or negative impact on cyclability. Herein, it is shown that for high-loading (pelletized) SSB cells using both a size- and surface-tailored Ni-rich layered oxide cathode material and a lithium thiophosphate solid electrolyte, the cycling performance is best when low-surface-area carbon black is introduced.

Indirect state-of-charge determination of all-solid-state battery cells by X-ray diffraction.

Determining the state-of-charge of all-solid-state batteries via both ex situ and operando X-ray diffraction, rather than by electrochemical testing (may be strongly affected by electrically isolated/inactive material, irreversible side reactions, etc.), is reported. Specifically, we focus on bulk-type cells and use X-ray diffraction data obtained on a liquid electrolyte-based Li-ion cell as the reference standard for changes in lattice parameters with (de)lithiation.

Room temperature, liquid-phase Al2O3 surface coating approach for Ni-rich layered oxide cathode material.

A room temperature, atomic-layer-deposition-like coating strategy for NCM811 (80% Ni) is reported. Trimethylaluminum is shown to readily react with adsorbed moisture, leading both to Al2O3 surface layer formation on NCM811 and to trace H2O removal in a single treatment step. Even more importantly, the cycling performance of pouch cells at 45 °C is greatly improved.

In-situ Measurement of Self-Atom Diffusion in Solids Using Amorphous Germanium as a Model System.

We present in-situ self-diffusion experiments in solids, which were carried out by Focussing Neutron Reflectometry on isotope multilayers. This new approach offers the following advantages in comparison to classical ex-situ measurements: (1) Identification and continuous measurement of a time dependence of diffusivities, (2) significant reduction of error limits of diffusivities, and (3) substantial reduction of the necessary experimental time. In the framework of a case study, yet unknown self-diffusivities in amorphous germanium are measured at various temperatures quasi-continuously, each during isothermal annealing. A significant decrease of diffusivities as a function of annealing time by one order of magnitude is detected that is attributed to structural relaxation accompanied by defect annihilation. In metastable equilibrium the diffusivities follow the Arrhenius law between 375 and 412 °C with an activation energy of Q = (2.11 ± 0.12) eV. The diffusivities are five orders of magnitude higher than in germanium single crystals at 400 °C, mainly due to the lower activation energy.

Impact of Structural Polymorphism on Ionic Conductivity in Lithium Copper Pyroborate Li6CuB4O10.

The search for high Li-ion conducting ceramics has regained tremendous interest triggered by the renaissance of the all-solid-state battery. Within this context we herein reveal the impact of structural polymorphism of lithium copper pyroborate Li6CuB4O10 on its ionic conductivity. Using combined in situ synchrotron X-ray and neutron powder diffraction, a structural and synthetic relationship between α- and ß-Li6CuB4O10 could be established and its impact on ionic conductivity evolution was followed using electrochemical impedance spectroscopy. We show that the high temperature form of Li6CuB4O10 exhibits a high Li-ion conductivity (2.7 mS cm-1 at 350 °C) and solve its crystal structure for the first time. Our results emphasize the significant impact of structural phase transitions on ionic conductivity and show possible high Li-ion mobility within borate based compounds.

Electrochemical behavior of Bi4B2O9 towards lithium-reversible conversion reactions without nanosizing.

Conversion type materials, in particular metal fluorides, have emerged as attractive candidates for positive electrodes in next generation Li-ion batteries (LIBs). However, their practical use is being hindered by issues related to reversibility and large polarization. To minimize these issues, a few approaches enlisting the anionic network have been considered. We herein report the electrochemical properties of bismuth oxyborate Bi4B2O9 and show that this compound reacts with lithium via a conversion reaction leading to a sustained capacity of 140 mA h g-1 when cycled between 1.7 and 3.5 V vs. Li+/Li0 while having a surprisingly small polarization (∼300 mV) in the presence of solely 5% in weight of a carbon additive. These observations are rationalized in terms of charge transfer kinetics via complementary XRD, HRTEM and NMR measurements. This finding demonstrates that borate based conversion type materials display rapid charge transfer with limited carbon additives, hence offering a new strategy to improve their overall cycling efficiency.

Synthesis, Structure, and Electrochemical Properties of Na3MB5O10 (M = Fe, Co) Containing M2+ in Tetrahedral Coordination.

In the search for new cathode materials for sodium ion batteries, the exploration of polyanionic compounds has led to attractive candidates in terms of high redox potential and cycling stability. Herein we report the synthesis of the two new sodium transition-metal pentaborates Na3MB5O10 (M = Fe, Co), where Na3FeB5O10 represents the first sodium iron borate reported at present. By means of synchrotron X-ray diffraction, we reveal a layered structure consisting of pentaborate B5O10 groups connected through M2+ in tetrahedral coordination, providing possible three-dimensional Na-ion migration pathways. Inspired by these structural features, we examined the electrochemical performances versus sodium and showed that Na3FeB5O10 is active at an average potential of 2.5 V vs Na+/Na0, correlated to the Fe3+/Fe2+ redox couple as deduced from ex situ Mössbauer measurements. This contrasts with the case for Na3CoB5O10, which is electrochemically inactive. Moreover, we show that their electrochemical performances are kinetically limited, as deduced by complementary ac/dc conductivity measurements, hence confirming once again the complexity in designing high-performance borate-based electrodes.

Electrochemical activity and high ionic conductivity of lithium copper pyroborate Li6CuB4O10.

In the search for new cathode materials for Li-ion batteries, borate (BO3(3-)) based compounds have gained much interest during the last two decades due to the low molecular weight of the borate polyanions which leads to active materials with increased theoretical capacities. In this context we herein report the electrochemical activity versus lithium and the ionic conductivity of a diborate or pyroborate B2O5(4-) based compound, Li6CuB4O10. By combining various electrochemical techniques with in situ X-ray diffraction, we show that this material can reversibly insert/deinsert limited amounts of lithium (∼0.3 Li(+)) in a potential window ranging from 2.5 to 4.5 V vs. Li(+)/Li(0). We demonstrate, via electron paramagnetic resonance (EPR), that such an electrochemical activity centered near 4.25 V vs. Li(+)/Li(0) is associated with the Cu(3+)/Cu(2+) redox couple, confirmed by density functional theory (DFT) calculations. Another specificity of this compound lies in its different electrochemical behavior when cycled down to 1 V vs. Li(+)/Li(0) which leads to the extrusion of elemental copper via a conversion type reaction as deduced by transmission electron microscopy (TEM). Lastly, we probe the ionic conductivity by means of AC and DC impedance measurements as a function of temperature and show that Li6CuB4O10 undergoes a reversible structural transition around 350 °C, leading to a surprisingly high ionic conductivity of ∼1.4 mS cm(-1) at 500 °C.

Self-Diffusion in Amorphous Silicon.

The present Letter reports on self-diffusion in amorphous silicon. Experiments were done on ^{29}Si/^{nat}Si heterostructures using neutron reflectometry and secondary ion mass spectrometry. The diffusivities follow the Arrhenius law in the temperature range between 550 and 700 °C with an activation energy of (4.4±0.3) eV. In comparison with single crystalline silicon the diffusivities are tremendously higher by 5 orders of magnitude at about 700 °C, which can be interpreted as the consequence of a high diffusion entropy.