ABSTRACT
Light-emitting electrochemical cells (LECs) promise low-cost, large-area luminescence applications with air-stabilized electrodes and a versatile fabrication that enables the use of solution processes. Nevertheless, the commercialization of LECs is still encountering many obstacles, such as low electroluminescence (EL) efficiencies of the ionic materials. In this paper, we propose five blue to yellow ionic Ir complexes possessing 4-fluoro-4'-pyrazolyl-(1,1'-biphenyl)-2-carbonitrile (ppfn) as a novel cyclometalating ligand and use them in LECs. In particular, the device within di[4-fluoro-4'-pyrazolyl-(1,1'-biphenyl)-2-carbonitrile]-4,4'-di-tert-butyl-2,2'-bipyridyl iridium(III) hexafluorophosphate (DTBP) shows a remarkable photoluminescence quantum yield (PLQY) of 70%, and by adjusting the emissive-layer thickness, the maximal external quantum efficiency (EQE) reaches 22.15% at 532 nm under the thickness of 0.51 µm, showing the state-of-the-art value for the reported blue-green LECs.
ABSTRACT
Two binuclear heteroleptic CuI complexes, namely Cu-NIR1 and Cu-NIR2, bearing rigid chelating diphosphines and π-conjugated 2,5-di(pyridin-2-yl)thiazolo[5,4-d]thiazole as the bis-bidentate ligand are presented. The proposed dinuclearization strategy yields a large bathochromic shift of the emission when compared to the mononuclear counterparts (M1-M2) and enables shifting luminescence into the near-infrared (NIR) region in both solution and solid state, showing emission maximum at ca. 750 and 712â nm, respectively. The radiative process is assigned to an excited state with triplet metal-to-ligand charge transfer (3 MLCT) character as demonstrated by in-depth photophysical and computational investigation. Noteworthy, X-ray analysis of the binuclear complexes unravels two interligand π-π-stacking interactions yielding a doubly locked structure that disfavours flattening of the tetrahedral coordination around the CuI centre in the excited state and maintain enhanced NIR luminescence. No such interaction is present in M1-M2. These findings prompt the successful use of Cu-NIR1 and Cu-NIR2 in NIR light-emitting electrochemical cells (LECs), which display electroluminescence maximum up to 756â nm and peak external quantum efficiency (EQE) of 0.43 %. Their suitability for the fabrication of white-emitting LECs is also demonstrated. To the best of our knowledge, these are the first examples of NIR electroluminescent devices based on earth-abundant CuI emitters.
ABSTRACT
A series of ten cationic complexes of the general formula [(C^C)Au(P^P)]X, where C^C = 4,4'-di-tert-butyl-1,1'-biphenyl, P^P is a diphosphine ligand, and X is a noncoordinating counteranion, have been synthesized and fully characterized by means of chemical and X-ray structural methods. All the complexes display a remarkable switch-on of the emission properties when going from a fluid solution to a solid state. In the latter, long-lived emission with lifetime τ = 1.8-83.0 µs and maximum in the green-yellow region is achieved with moderate to high photoluminescence quantum yield (PLQY). This emission is ascribed to an excited state with a mainly triplet ligand-centered (3LC) nature. This effect strongly indicates that rigidification of the environment helps to suppress nonradiative decay, which is mainly attributed to the large molecular distortion in the excited state, as supported by density functional theory (DFT) and time-dependent DFT (TD-DFT) computation. In addition, quenching intermolecular interactions of the emitter are avoided thanks to the steric hindrance of the substituents. Emissive properties are therefore restored efficiently. The influence of both diphosphine and anion has been investigated and rationalized as well. Using two complexes as examples and owing to their enhanced optical properties in the solid state, the first proof-of-concept of the use of gold(III) complexes as electroactive materials for the fabrication of light-emitting electrochemical cell (LEC) devices is herein demonstrated. The LECs achieve peak external quantum efficiency, current efficiency, and power efficiency up to ca. 1%, 2.6 cd A-1, and 1.1 lm W-1 for complex 1PF6 and 0.9%, 2.5 cd A-1, and 0.7 lm W-1 for complex 3, showing the potential use of these novel emitters as electroactive compounds in LEC devices.
ABSTRACT
Solid-state light-emitting electrochemical cells (LECs) show promising advantages of simple device architecture, low operation voltage, and insensitivity to the electrode work functions such that they have high potential in low-cost display and lighting applications. In this work, novel white LECs based on phosphor-sensitized thermally activated delayed fluorescence (TADF) are proposed. The emissive layer of these white LECs is composed of a blue-green phosphorescent host doped with a deep-red TADF guest. Efficient singlet-to-triplet intersystem crossing (ISC) on the phosphorescent host and the subsequent Förster energy transfer from the host triplet excitons to guest singlet excitons can make use of both singlet and triplet excitons on the host. With the good spectral overlap between the host emission and the guest absorption, 0.075â wt.% guest doping is sufficient to cause substantial energy transfer efficiency (ca. 40 %). In addition, such a low guest concentration also reduces the self-quenching effect and a high photoluminescence quantum yield of up to 84 % ensures high device efficiency. The phosphor-sensitized TADF white LECs indeed show a high external quantum efficiency of 9.6 %, which is comparable with all-phosphorescent white LECs. By employing diffusive substrates to extract the light trapped in the substrate, the device efficiency can be further improved by ca. 50 %. In the meantime, the intrinsic EL spectrum and device lifetime of the white LECs recover since the microcavity effect is destroyed. This work successfully demonstrates that the phosphor-sensitized TADF white LECs are potential candidates for efficient white light-emitting devices.
ABSTRACT
Long-wavelength light-emitting electrochemical cells (LECs) are potential deep-red and near infrared light sources with solution-processable simple device architecture, low-voltage operation, and compatibility with inert metal electrodes. Many scientific efforts have been made to material design and device engineering of the long-wavelength LECs over the past two decades. The materials designed the for long-wavelength LECs cover ionic transition metal complexes, small molecules, conjugated polymers, and perovskites. On the other hand, device engineering techniques, including spectral modification by adjusting microcavity effect, light outcoupling enhancement, energy down-conversion from color conversion layers, and adjusting intermolecular interactions, are also helpful in improving the device performance of long-wavelength LECs. In this review, recent advances in the long-wavelength LECs are reviewed from the viewpoints of materials and device engineering. Finally, discussions on conclusion and outlook indicate possible directions for future developments of the long-wavelength LECs. This review would like to pave the way for the researchers to design materials and device engineering techniques for the long-wavelength LECs in the applications of displays, bio-imaging, telecommunication, and night-vision displays.
ABSTRACT
In this study, we firstly propose an optical approach to investigate the ion profile of organic films in light-emitting electrochemical cells (LECs) without any invasive sputtering processes. In contrast to previous literatures, this pure optical strategy allows us to record clear and non-destructive ion profile images in the (Ru(dtb-bpy)3(PF6)2) consisted organic layer without interferences of complex collisions from the bombardment of secondary sputter induced ions in a conventional time-of-flight secondary ion mass spectrometry. By using the advanced position sensitive detector (PSD)-based Nanoscale Confocal Microscope, ion distribution profiles were successfully acquired based on the observation of nanoscale optical path length difference by measuring the refractive-index variation while the thickness of the LEC layer was fixed. Dynamic time-dependent ion profile displayed clear ion migration process under a 100â V applied bias at two ends of the LEC. This technique opens up a new avenue towards the future investigations of ion distributions inside organic/inorganic materials, Li-ion batteries, or micro-fluid channels without damaging the materials or disturbing the device operation.
ABSTRACT
Invited for the cover of this issue are Chin-Wei Lu, Zu-Po Yang, Hai-Ching Su, and co-workers at National Yang Ming Chiao Tung University and Providence University. The image depicts electron transport for light-emitting electrochemical cells. Read the full text of the article at 10.1002/chem.202103739.
ABSTRACT
Recently, perovskites have attracted intense attention due to their high potential in optoelectronic applications. Employing perovskites as the emissive materials of light-emitting electrochemical cells (LECs) shows the advantages of simple fabrication process, low-voltage operation, and compatibility with inert electrodes, along with saturated electroluminescence (EL) emission. Unlike in previously reported perovskite LECs, in which salts are incorporated in the emissive layer, the ion-transport layer was separated from the emissive layer in this work. The layer of ionic transition metal complex (iTMC) not only provides mobile ions but also serves as an electron-injection/transport layer. Orthogonal solvents are used in spin coating to prevent the intermixing of stacked perovskite and iTMC layers. The blue iTMC with high ionization potential is effective in blocking holes from the emissive layer and thus ensures EL color saturation. In addition, the carrier balance of the perovskite/iTMC LECs can be optimized by adjusting the iTMC layer thickness. The optimized external quantum efficiency of the CsPbBr3 /iTMC LEC reaches 6.8 %, which is among the highest reported values for perovskite LECs. This work successfully demonstrates that, compared with mixing all components in a single emissive layer, separating the layer of ion transport, electron injection and transport from the perovskite emissive layer is more effective in adjusting device carrier balance. As such, solution-processable perovskite/iTMC LECs open up a new way to realize efficient perovskite LECs.
ABSTRACT
Light-emitting electrochemical cells (LECs) show high technical potential for display and lighting utilizations owing to the superior properties of solution processability, low operation voltage, and employing inert cathodes. For maximizing the device efficiency, three approaches including development of efficient emissive materials, optimizing the carrier balance, and maximizing the light extraction have been reported. However, most reported works focused on only one of the three optimization approaches. In this work, a combinational approach is demonstrated to optimize the device efficiency of LECs. A sophisticatedly designed yellow complex exhibiting a superior steric hindrance and a good carrier balance is proposed as the emissive material of light-emitting electrochemical cells and thus the external quantum efficiency (EQE) is up to 13.6%. With an improved carrier balance and reduced self-quenching by employing the host-guest strategy, the device EQE can be enhanced to 16.9%. Finally, a diffusive layer embedded between the glass substrate and the indium-tin-oxide layer is utilized to scatter the light trapped in the layered device structure, and consequently, a high EQE of 23.7% can be obtained. Such an EQE is impressive and consequently proves that the proposed combinational approach including adopting efficient emissive materials, optimizing the carrier balance, and maximizing the light extraction is effective in realizing highly efficient LECs.
ABSTRACT
Solid-state white light-emitting electrochemical cells (LECs) show promising advantages of simple solution fabrication processes, low operation voltage, and compatibility with air-stable cathode metals, which are required for lighting applications. To date, white LECs based on ionic transition metal complexes (iTMCs) have shown higher device efficiencies than white LECs employing other types of materials. However, lower emission efficiencies of red iTMCs limit further improvement in device performance. As an alternative, efficient red CdZnSeS/ZnS core/shell quantum dots were integrated with a blue iTMC to form a hybrid white LEC in this work. By achieving good carrier balance in an appropriate device architecture, a peak external quantum efficiency and power efficiency of 11.2 % and 15.1â lm W-1, respectively, were reached. Such device efficiency is indeed higher than those of the reported white LECs based on host-guest iTMCs. Time- and voltage-dependent electroluminescence (EL) characteristics of the hybrid white LECs were studied by means of the temporal evolution of the emission-zone position extracted by fitting the simulated and measured EL spectra. The working principle of the hybrid white LECs was clarified, and the high device efficiency makes potential new white-emitting devices suitable for solid-state lighting technology possible.
ABSTRACT
Solid-state light-emitting electrochemical cells (LECs) have several advantages, such as low-voltage operation, compatibility with inert metal electrodes, large-area flexible substrates, and simple solution-processable device architectures. However, most of the studies on saturated red LECs show low or moderate device efficiencies (external quantum efficiency (EQE) <3.3 %). In this work, we demonstrate a series of five red-emitting cationic iridium complexes (RED1--RED5) with 2,2'-biquinoline ligands and test their electroluminescence (EL) characteristics in LECs. The Commission Internationale de l'Eclairage (CIE) 1931 coordinates for the LECs based on these complexes are all beyond the National Television System Committee (NTSC) red standard point (0.67, 0.33). The maximal EQE of the neat-film RED1-based LECs reaches 7.4 %. The reddest complex, RED3, is doped in the blue-emitting host complex, BG, to fabricate host-guest LECs. The maximal EQE of the host-guest LECs (1â wt % complex RED3) reaches 9.4 %, which is among the highest reported for the saturated red LECs.
ABSTRACT
Solid-state near-infrared (NIR) light-emitting devices have recently received considerable attention as NIR light sources that can penetrate deep into human tissue and are suitable for bioimaging and labeling. In addition, solid-state NIR light-emitting electrochemical cells (LECs) have shown several promising advantages over NIR organic light-emitting devices (OLEDs). However, among the reported NIR LECs based on ionic transition-metal complexes (iTMCs), there is currently no iridium-based LEC that displays NIR electroluminescence (EL) peaks near to or above 800â nm. In this report we demonstrate a simple method for adjusting the energy gap between the highest-occupied molecular orbital (HOMO) and the lowest-unoccupied molecular orbital (LUMO) of iridium-based iTMCs to generate NIR emission. We describe a series of novel ionic iridium complexes with very small energy gaps, namely NIR1-NIR6, in which 2,3-diphenylbenzo[g]quinoxaline moieties mainly take charge of the HOMO energy levels and 2,2'-biquinoline, 2-(quinolin-2-yl)quinazoline, and 2,2'-bibenzo[d]thiazole moieties mainly control the LUMO energy levels. All the complexes exhibited NIR phosphorescence, with emission maxima up to 850â nm, and have been applied as components in LECs, showing a maximum external quantum efficiency (EQE) of 0.05 % in the EL devices. By using a host-guest emissive system, with the iridium complex RED as the host and the complex NIR3 or NIR6 as guest, the highest EQE of the LECs can be further enhanced to above 0.1 %.
ABSTRACT
Solid-state white light-emitting electrochemical cells (LECs) are potential candidates in solid-state lighting due to their promising advantages of simple device structure, low-voltage operation and compatibility with inert cathode metals. Adjusting the correlated color temperature (CCT) of background illumination is highly desired for modern smart lighting systems. In this work, a novel technique to tune the CCT of electroluminescence (EL) from white LECs is proposed. Color tuning is based on adjusting the applied voltage pulse period on the host-guest white LECs and the working mechanism is illustrated. A shorter voltage pulse period is insufficient to completely charge the capacitive LEC device and thus the effective voltage applied on the device is lower. Since the host-guest energy level offsets favor carrier trapping, a lower effective applied voltage results in a more pronounced guest emission, rendering redder white EL with a lower CCT. On the other hand, a longer voltage pulse period facilitates more complete charging and the effective voltage applied on the white LEC is higher. A higher bias facilitates direct exciton formation on the host molecule and subsequent partial host-guest energy transfer generates bluer white EL with a higher CCT. By tuning the voltage pulse period from 0.2 to 20 ms, the CCT of EL resulting from white LECs ranges from 2482 to 5723 K. The CCT tuning range is sufficient for general lighting applications. In contrast to color tuning of white LECs under constant-voltage driving, in which >10× brightness enhancement is accompanied by higher-CCT white EL, the discharging half-period in pulse-voltage driving provides relaxation time to turn off the device and reduces the average brightness of the white LECs driven under a longer voltage pulse period. Therefore, similar brightness can be achieved for white EL with different CCTs. No additional optical filtering device is needed for this novel color tuning technique and it has potential for use in solid-state lighting.
ABSTRACT
The development of white-light-emitting electrochemical cells (LECs) has attracted great attention owing to their numerous advantages. Recently, perovskite materials have also shown many outstanding optoelectronic properties in light absorption and emission, and hence they are suitable for serving as the color conversion layers (CCLs) in solid-state white-light-emitting diodes (LEDs). Here, white LECs were fabricated by integrating non-doped blue-green LECs with CCLs made of a single composition of perovskite nanocrystal (NCs). Moreover, the correlated color temperatures (CCTs) of the white LECs can be tuned by modifying the optical properties of the perovskite NCs, in the same way as so as the color conversion properties of CCLs are tuned, through laser scan. By controlling the laser power, scanning number, and duty cycle of the scanned grating patterns on perovskite-NC CCLs, the CCTs of the white LECs can be tuned from 2502â K to nearly 4300â K. Since this method is much different from that used with conventional CCLs, which use multiple compositions of perovskite NCs to produce white light, the inherent anion-exchange issue of perovskite NCs can be avoided.
ABSTRACT
The concept of solid-state light-emitting electrochemical cells (LECs), proposed in 1995, opened a new field in display and lighting technologies. The key advantage of this technology derives from a single emissive layer containing an emissive material and an ionic salt. Mobile ions in the emissive layer induce electrochemical doping at electrodes and thus the operation voltage can be reduced even if using air-stable electrodes. Since the first demonstration of LECs, many materials-oriented efforts have been made in improving device performance of LECs. However, some difficulties arising from material properties limit further optimizing the device characteristics of LECs. Recently, optical techniques have been shown to achieve better device properties without using new materials. Light extraction techniques recycle the light trapped in layered device structure and thus enhance the light output and efficiency of LECs. Recombination zone probing techniques offer direct evidence of carrier balance in LECs and is helpful in optimizing device performance. Spectral filtering based on microcavity effects and localized surface plasmon resonance from metal nanoparticles have the advantages of easy fabrication and compatibility with device processing of LECs. This Minireview provides an overview of the three categories of recent advances in optical techniques for LECs.
ABSTRACT
The miniaturization of metal tracks in integrated circuits (ICs) can cause abnormal heat dissipation, resulting in electrostatic discharge, overvoltage breakdown, and other unwanted issues. Unfortunately, locating areas of abnormal heat dissipation is limited either by the spatial resolution or imaging acquisition speed of current thermal analytical techniques. A rapid, non-contact approach to the thermal imaging of ICs with sub-µm resolution could help to alleviate this issue. In this work, based on the intensity of the temperature-dependent two-photon fluorescence (TPF) of Rhodamine 6G (R6G) material, we developed a novel fast and non-invasive thermal microscopy with a sub-µm resolution. Its application to the location of hotspots that may evolve into thermally induced defects in ICs was also demonstrated. To the best of our knowledge, this is the first study to present high-resolution 2D thermal microscopic images of ICs, showing the generation, propagation, and distribution of heat during its operation. According to the demonstrated results, this scheme has considerable potential for future in situ hotspot analysis during the optimization stage of IC development.
ABSTRACT
Recently, the control of correlated color temperature (CCT) of artificial solid-state white-light sources starts to attract more attention since CTs affect human physiology and health profoundly. In this work, we proposed and demonstrated a method that can widely tune the CCTs of electroluminescence (EL) from white-light-emitting electrochemical cells (LECs) by employing plasmonic filters. These integrated on-chip plasmonic filters are composed of semicontinuous thin Ag film or Ag nanoparticles (NPs) both included in the indium tin oxide anode contact, which have different characteristics of plasmonic resonant absorptions that can tune the EL spectra of white LECs. The CCTs of EL from white LECs integrated with semicontinuous thin Ag film and randomly distributed Ag NPs are 5778 and 2350 K, respectively. A commercially available laser scanning system was used to locally thermal anneal the semicontinuous thin Ag film to form the randomly distributed Ag NPs on the scanned areas. Hence, these two kinds of filters can be integrated on the same chip of white LEC, giving more freedom to control the CCTs of white EL and more potential applications. In addition, the laser scanning system used here is quite often used in display manufactures so that our proposed method can be immediately adopted by the light-emitting diode industry.
ABSTRACT
Solid-state near-infrared (NIR) light-emitting electrochemical cells (LECs) possess great potential in applications of NIR light sources due to their simple device structure, compatibility with large area and flexible substrates and low operating voltage. However, common host-guest NIR LECs suffer from the problem of significantly enhanced residual host emission upon increasing the bias voltage to achieve a higher NIR light output. A higher NIR light output can only be obtained at the expense of spectral purity in host-guest NIR LECs. To enhance the NIR light output of LECs without sacrificing the spectral purity significantly, a novel approach to generate NIR EL from host-only red-emitting LECs by adjusting the device thickness to modify the microcavity effect is proposed. NIR EL from host-only red-emitting LECs can be realized by adjusting the device thickness to shift the peak wavelength for constructive interference at the NIR spectral region. NIR EL resulting from the microcavity effect is relatively insensitive to bias voltage. Therefore, without losing spectral purity significantly, a 20× enhancement in the NIR output has been obtained in comparison to the previously reported value from host-guest NIR LECs. These results reveal that tailoring the EL spectra of host-only red-emitting LECs via modifying the microcavity effect would be a promising way to generate a higher NIR light output without suffering from the residual host emission problem of host-guest NIR LECs.
ABSTRACT
Solid-state light-emitting electrochemical cells (LECs) based on ionic transition metal complexes (iTMCs) have several advantages such as high efficiency, low operation voltage and simple device structure. To improve the device efficiency of iTMC-based LECs for practical applications, improving the carrier balance to achieve a centered recombination zone would be an important issue. In this work, incorporating a hole-transport material (HTM) into the emissive layer of iTMC-based LECs is shown to improve device performance. When mixed with an HTM (12%), the LECs based on a Ru complex exhibit 1.9× and 1.5× enhancement in peak light output and peak external quantum efficiency (EQE) as compared to neat-film devices. Furthermore, over 2× enhancement in stabilized EQE can be achieved in LECs mixed with an HTM. It is attributed to that a more centered recombination zone in LECs mixed with an HTM is beneficial in reducing exciton quenching in the recombination zone approaching extended doped layers. Estimating the temporal evolution of the recombination zone in the LECs mixed with an HTM by employing the microcavity effect is demonstrated to confirm the physical origin for improved device performance. These results reveal that incorporating of an HTM in the emissive layer of LECs based on an iTMC is a feasible way to improve carrier balance and thus enhance light output and device efficiency.
ABSTRACT
Solid-state white light-emitting electrochemical cells (LECs) have attracted research attention owing to their advantages of simple device structure, low operation voltage and compatibility with solution processes. In this work, we demonstrate a simple approach to obtain white electroluminescence (EL) from non-doped LECs based on a blue-emitting complex. With a relatively thicker emissive layer, red emission can be additionally enhanced by the microcavity effect when the recombination zone moves to appropriate positions. Hence, white EL can be harvested by combining blue emission from the complex and red emission from the microcavity effect. These non-doped white LECs show external quantum efficiencies and power efficiencies up to 5% and 12 lm W(-1), respectively. These results show that efficient white EL can be obtained in simple non-doped LECs.