Design of a sustainable system for wastewater treatment and generation of biofuels based on the biomass of the aquatic plant Eichhornia Crassipes.

Colombia's continuous contamination of water resources and the low alternatives to produce biofuels have affected the fulfillment of the objectives of sustainable development, deteriorating the environment and affecting the economic productivity of this country. Due to this reality, projects on environmental and economic sustainability, phytoremediation, and the production of biofuels such as ethanol and hydrogen were combined. The objective of this article was to design and develop a sustainable system for wastewater treatment and the generation of biofuels based on the biomass of the aquatic plant Eichhornia crassipes. A system that simulates an artificial wetland with live E. crassipes plants was designed and developed, removing organic matter contaminants; subsequently, and continuing the sustainability project, bioreactors were designed, adapted, and started up to produce bioethanol and biohydrogen with the hydrolyzed biomass used in the phytoremediation process, generating around 12 g/L of bioethanol and around 81 ml H2/g. The proposed research strategy suggests combining two sustainable methods, bioremediation and biofuel production, to preserve the natural beauty of water systems and their surroundings.

Factors for the implementation of the circular economy in Big Data environments in service companies in post pandemic times of COVID-19: The case of Colombia.

In emerging economies, Big Data (BD) analytics has become increasingly popular, particularly regarding the opportunities and expected benefits. Such analyzes have identified that the production and consumption of goods and services, while unavoidable, have proven to be unsustainable and inefficient. For this reason, the concept of the circular economy (CE) has emerged strongly as a sustainable approach that contributes to the eco-efficient use of resources. However, to develop a circular economy in DB environments, it is necessary to understand what factors influence the intention to accept its implementation. The main objective of this research was to assess the influence of attitudes, subjective norms, and perceived behavioral norms on the intention to adopt CE in BD-mediated environments. The methodology is quantitative, cross-sectional with a descriptive correlational approach, based on the theory of planned behavior and a Partial Least Squares Structural Equation Model (PLS-SEM). A total of 413 Colombian service SMEs participated in the study. The results show that managers' attitudes, subjective norms, and perceived norms of behavior positively influence the intentions of organizations to implement CB best practices. Furthermore, most organizations have positive intentions toward CE and that these intentions positively influence the adoption of DB; however, the lack of government support and cultural barriers are perceived as the main limitation for its adoption. The research leads to the conclusion that BD helps business and government develop strategies to move toward CE, and that there is a clear positive will and intent toward a more restorative and sustainable corporate strategy.

Osteotomies of the second phalanx of the great toe: A clinical experience.

BACKGROUND: At the time of the first report on the feasibility of corrective osteotomies of the distal phalanx (DP) of the great toe there were no published studies addressing this type of surgery. Along this line, and throughout our clinical experience, this paper tries to show the clinical benefits of hallux DP osteotomies when correcting interphalangeal valgus deformities (IHV) of the great toe, either with open or percutaneous procedure. MATERIAL AND METHODS: This is a review of 18 cases in which a DP osteotomy was performed in 2 different institutions, 8 cases were performed using open technique and 10 cases percutaneously. The correction obtained was analyzed by measuring the distal articular set angle (DASA), obliquity angle (AP1), asymmetry angle (AP2), and global distal phalanx deviation (GDPD) angle before and after the surgery on dorso-plantar weight-bearing radiographs in all cases. Clinical results were also recorded. RESULTS: Excellent clinical and radiological results were achieved with both techniques in all patients with no complications. The average DP angular deformity correction in terms of AP1, AP2 and GDPD angles were 4.58º ± 5.55º, 8.95º ± 4.77º and 16.53º ± 7.26 respectively. In 10 cases an Akin osteotomy was associated. CONCLUSION: In cases with valgus deviation in the hallux DP, a corrective osteotomy of the DP alone or associated to osteotomy of the PP should be considered as a useful tool. The technique is feasible and has no technical difficulties for an orthopedic surgeon with experience on feet surgery.

Blood Pressure Monitoring and Perinatal Outcomes in Normotensive Women with Gestational Diabetes Mellitus.

Alterations in ambulatory blood pressure detected by monitoring (ABPM) have been associated with perinatal complications in hypertensive pregnant women. AIM: To establish the relationships between the blood pressure (BP) profiles detected by ABPM and adverse perinatal outcomes in normotensive women with gestational diabetes mellitus (GDM). METHODS: A prospective study of normotensive women in whom 24 h ABPM was performed at 28-32 weeks of pregnancy. The obstetric and perinatal outcomes were evaluated. RESULTS: Two hundred patients were included. Thirty-seven women with GDM and obesity had significantly higher mean systolic BP (SBP) and nocturnal SBP and diastolic BP (DBP) compared to women with only GDM (n = 86). Nocturnal SBP (OR = 1.077; p = 0.015) and obesity (OR = 1.131; p = 0.035) were risk factors for the development of hypertensive disorders of pregnancy (HDPs). Mothers of newborns with neonatal complications (n = 27) had higher nocturnal SBP (103.8 vs. 100 mmHg; p = 0.047) and DBP (62.7 vs. 59.4; p = 0.016). Women who delivered preterm (n = 10) had higher BP and a non-dipper pattern (p = 0.005). CONCLUSIONS: Nocturnal SBP was a predictor of HDPs in normotensive women with obesity or GDM. Alterations in ABPM in these patients were associated with poor obstetric and perinatal outcomes.

Risk Factors of DAIR Failure and Validation of the KLIC Score: A Multicenter Study of Four Hundred Fifty-Five Patients.

Background: Debridement, antibiotic agents, and implant retention (DAIR) is a currently accepted approach for the treatment of early prosthetic joint infections (PJI). The success of a DAIR procedure has shown variable results throughout the published literature. Scoring systems such as the Kidney, Liver, Index surgery, Cemented prosthesis, and C-reactive protein value (KLIC) score for the selection of patients that are likely to benefit from DAIR have proved to be helpful in decision making. Our study aims to further validate the KLIC score using a large external multicentric cohort and to evaluate other risk factors for failure. Patients and Methods: A retrospective analysis of patients with an early acute PJI who were treated with DAIR and recorded in a database of eight Spanish university hospitals was performed. According to pre-operative variables of the KLIC study, patients were categorized into five groups: group A, ≤2 points; group B, 2.5-3.5 points; group C, 4-5 points; group D, 5.5-6.5 points; and group E, ≥7 points. Failure rates were compared between groups at 60 days and after 60 days of DAIR. Further variables for risk of failure were also analyzed. Results: A total of 455 patients with early acute PJI were included in the analyses. At 60 days, patients presenting with pre-operative elevated C-reactive protein serum levels, Staphylococcus aureus, and polymicrobial infections were associated with failure. Failure rates recorded were 12% for group A (n = 210), 18% for group B (n = 83), 26% for group C (n = 89), 24% for group D (n = 66), and 0% for group E (n = 7). Univariable analysis between consecutive groups of the KLIC score showed no differences for failure before 60 days of the DAIR procedure. Scheduled surgery and having the procedure performed by a specialized unit were also identified as important factors for DAIR success. Conclusions: Our results suggest the KLIC score was not useful for predicting failure in our cohort. Furthermore, our results indicate a specialized unit should conduct DAIR procedures.

La neuroendoscopia: una técnica revolucionaria en el campo de la neurocirugía / Neuroendoscopy: a revoluciotionary technique in neurosurgery

La neuroendoscopia es un procedimiento mínimamente invasivo que se desarrolló a principios del siglo pasado y tiene importancia en el campo de la neurocirugía, representa un método innovador ya que aporta una amplia visualización de las estructuras anatómicas con mínimo traumatismo del tejido nervioso, contribuyendo al diagnóstico y tratamiento de diversas afecciones intra y extracerebral. Se realizó una búsqueda bibliográfica con el propósito de identificar, analizar y describir algunas patologías neuroquirúrgicas que se han tratado bajo neuroendoscopia, así como los aportes más relevantes en cirugía pediátrica y de columna, con el fin de exponer el impacto que ha tenido esta técnica en el desarrollo de la cirugía moderna.

Neuroendoscopy is a minimally-invasive procedure that was developed at the beginning of the last century and plays an important role in neurosurgery. It is an innovative method since it enables a broad visualization of the anatomical structures with minimal damage to the nervous tissue, contributing to the diagnosis and treatment of a variety of intra and extracerebral conditions. A bibliographic search was carried out to identify, analyze and describe some neurological pathologies that have been treated using neuroendoscopic surgery. The most relevant contributions to pediatric and spine surgery are also outlined to show the impact that this technique has had in the progress of modern surgery.

Cemented Dual Mobility Cup for Primary Total Hip Arthroplasty in Elder Patients with High-Risk Instability.

Several studies have shown that double mobility (DM) cups reduce postoperative dislocations. Does the cemented dual mobility cup reduce dislocations in a specific cohort of elder patients with a high dislocation risk? Our hypothesis is that this implant is optimal for elder patients because it reduces early dislocation. We have retrospectively reviewed elder patients who underwent total hip arthroplasty (THA) with cemented double mobility cup between March 2009 and January 2018. The inclusion criteria were patients (>75 years) who were operated on for primary THA (osteoarthritis or necrosis) with a cemented dual mobility cup and a high-risk instability (at least two patient-dependent risk factors for instability). The exclusion criteria were revision surgeries or hip fracture. In all the cases, the same surgical approach was performed with a Watson Jones modified approach in supine position. We have collected demographic data, instability risk factors. Patients were classified using the Devane's score, Merle d'Aubigné score and the patient's likelihood of falling with the Morse Fall Scale. Surgical and follow-up complications were collected from their medical history. Sixty-eight arthroplasties (68 patients) were included in the study. The median age was 81.7 years (SD 6.4), and the American Society of Anesthesiologists (ASA) score showed a distribution: II 27.94%, III 63.24% and IV 8.82%. Devane's score was less than five in all of the cases. At least two patient-dependent risk factors for instability (87% had three or more) were present in each case. The median follow-up time was 49.04 months (SD 22.6). Complications observed were two cases of infection and one case of aseptic loosening at 15 months which required revision surgery. We did not observe any prosthetic dislocation. The cemented dual mobility cup is an excellent surgical option on primary total hip arthroplasties for elder patients with high-risk instability.

Split-type fractures of the spine: a new minimally invasive percutaneous technique / Fraturas tipo split da coluna: nova técnica percutânea minimamente invasiva / Fracturas tipo split de la columna: nueva técnica percutánea mínimamente invasiva

ABSTRACT Objective: This research presents a biomechanical analysis performed in the lumbar spine of a porcine animal model, considering a minimally invasive technique for the treatment of split fractures. Methods: Porcine spines were used to perform compression tests, considering three different approaches. Three groups were defined in order to verify and validate the proposed technique: a control group (1); spines with split fractures (2); and a treatment group (3). For the first group (control), spines were axially compressed until any kind of fracture occurred, in order to verify the strength of the structure. In the second group, split fractures were created to obtain the mechanical failure pattern of the model. In the third group, the split fractures were submitted to the proposed treatment, to verify the resistance achieved. The three groups were compared by means of axial compression tests. Statistical analysis was performed by ANOVA. Results: The control group (intact spine) and the treated split fracture group presented similar results (p>0.05), differing from the results for the untreated split fracture group (p<0.05). Conclusions: The tests performed in order to determine the behavior and strength of the lumbar spine when subjected to axial compression provided positive data for the development of a minimally invasive technique capable of restoring split fractures of the spine. Level of evidence III; Experimental research.

RESUMO Objetivo: Esta pesquisa apresenta uma análise biomecânica realizada na coluna lombar em modelo animal suíno, considerando uma técnica minimamente invasiva para o tratamento de fraturas vertebrais do tipo split. Métodos: Foram usadas colunas de suínos para a realização de testes de compressão, considerando três diferentes abordagens. Para verificar e validar a técnica proposta, foram definidos três grupos: grupo controle (1); colunas com fraturas do tipo split (2) e grupo tratamento (3). No o primeiro grupo (controle), as colunas foram comprimidas axialmente até que ocorresse qualquer tipo de fratura, a fim de verificar a resistência da estrutura. No segundo grupo, foram criadas fraturas do tipo split para obter o padrão de falha mecânica do modelo. No terceiro grupo, as fraturas do tipo split foram submetidas ao tratamento proposto, para verificar a resistência alcançada. Os três grupos foram comparados por meio de testes de compressão axial. A análise estatística foi realizada por ANOVA. Resultados: O grupo controle (coluna íntegra) e o grupo com fratura do tipo split tratada apresentaram resultados semelhantes (p > 0,05), diferentemente dos resultados do grupo com fratura do tipo split não tratada (p < 0,05). Conclusões: Os testes para determinar o comportamento e a força da coluna lombar quando é submetida à compressão axial forneceram dados positivos para o desenvolvimento de uma técnica minimamente invasiva capaz de restaurar fraturas tipo split da coluna vertebral. Nível de evidência III; Pesquisa experimental.

RESUMEN Objetivo: Esta investigación presenta un análisis biomecánico realizado en la columna lumbar de un modelo animal porcino, considerando una técnica mínimamente invasiva para el tratamiento de fracturas vertebrales del tipo split. Métodos: Fueron usadas columnas de porcinos para la realización de tests de compresión, considerando tres diferentes abordajes. Para verificar y validar la técnica propuesta, fueron definidos tres grupos: grupo control (1); columnas con fracturas del tipo split (2) y grupo tratamiento (3). En el primer grupo (control), las columnas fueron comprimidas axialmente hasta que ocurriera cualquier tipo de fractura, a fin de verificar la resistencia de la estructura. En el segundo grupo, fueron creadas fracturas del tipo split para obtener el patrón de falla mecánica del modelo. En el tercer grupo, las fracturas del tipo split fueron sometidas al tratamiento propuesto, para verificar la resistencia alcanzada. Los tres grupos fueron comparados por medio de tests de compresión axial. El análisis estadístico fue realizado por ANOVA. Resultados: El grupo control (columna íntegra) y el grupo con fractura del tipo split tratada presentaron resultados semejantes (p>0,05), a diferencia de los resultados del grupo con fractura del tipo Split no tratada (p<0,05). Conclusiones: Los tests para determinar el comportamiento y la fuerza de la columna lumbar cuando es sometida a la compresión axial suministraron datos positivos para el desarrollo de una técnica mínimamente invasiva, capaz de restaurar fracturas del tipo Split de la columna vertebral. Nivel de evidencia III; Investigación experimental.

Proximal tibiofibular joint changes after closed-wedge high tibial osteotomy. Are they relevant?

BACKGROUND: There is some controversy about how the proximal tibiofibular joint (PTFJ) capsulotomy changes PTFJ anatomy in closed-wedge high tibial osteotomy (CW-HTO) and about how this affects ankle and knee mobility and the onset of lateral knee pain. The aim of this study is to evaluate changes in PTFJ after CW-HTO, and its possible clinical significance. METHODS: This study includes 50 patients who underwent CW-HTO with tibiofibular capsulotomy from 2000 to 2018 in our hospital. A clinical evaluation was conducted to evaluate pain location. The degrees of osteoarthritis and the proximal fibular subluxation were evaluated on radiographs. A dynamic analysis of the PTFJ was also performed comparing proximal fibular head subluxation on anteroposterior knee radiographs with the ankle placed in neutral position and dorsiflexed. RESULTS: The clinical evaluation revealed that two patients had a sore scar, five had pain on the PTFJ with manual compression, and none referred lateral compartment pain. The radiological analysis revealed an average proximal subluxation of the fibular head after the osteotomy of 9.64 (range: 0-29) mm, which was greater in oblique PTFJ (p < 0.05). After the surgery, all the patients developed some degree of PTFJ arthritis. There was no correlation between lateral pain and proximal fibular subluxation, tibiofibular arthritis, or lateral compartment arthritis. The dynamic analysis revealed no significant changes. CONCLUSIONS: After CW-HTO all the patients developed proximal subluxation of the fibular head and a variable degree of PTFJ osteoarthritis, but these changes seem to be unrelated with lateral knee pain.

Akin osteotomy: Is the type of staple fixation relevant?

BACKGROUND: Although different fixation techniques for the Akin osteotomy have been described in the literature, there are no many studies trying to analyze the differences between the types of fixation available. The aim of this study is to analyze if there are any differences between three types of staple fixation available in the market. METHOD: We present a retrospective study of 145 cases in which an Akin osteotomy was performed and fixed with three different kinds of implants staple A (28%), staple B (45%), and staple C (27%). Staple A is made out of stainless steel, and the surgeon mechanically controls the compression applied. Staple B increases the compression when heat is applied to it. Staple C has an intrinsic elastic memory that closes the osteotomy. In all cases, distal articular set angle, interphalangeal joint obliquity angle, and metatarsophalangeal angle were measured pre-operatively and 1.5 months post-operatively on dorsoplantar weight-bearing radiographs. Other details such as post-operative complications, implant migration, osteolysis, or fracture of the lateral cortex during surgery were also recorded. RESULTS: Clinical and radiological results show no relevant differences between the three types of fixation. The mean angular corrections of DASA, interphalangeal joint obliquity angle, and metatarsophalangeal angle were 5, 12, and 21, respectively, for staple A; 4, 10, and 19, respectively, for staple B; and 7, 10, and 23, respectively, for staple C. The rates of intra-operative and post-operative complications were similar for all groups. There was one case of infection per group. We had five cases of delayed union two with staple A and three with staple C. In four cases, there was a loss of correction, two of them fixed with staple A and two with staple C. Seven cases developed a Südeck's syndrome, four of them fixed with staple A and three with staple C. Fifteen patients suffered an uncontrolled fracture of the lateral cortex of the phalanx when performing the osteotomy (3, 8, and 4 cases fixed with staples A, B, and C, respectively), and 87.5% of the patients that developed a plantar displacement of the osteotomy had an uncontrolled fracture of the lateral cortex (p < 0.05). All three staples achieved a rigid internal fixation and minimal periosteum damage and provided a good bone-bone contact. CONCLUSIONS: According to our results, the radiological differences are minimal, and although the thermal compression staple had less complication, clinical differences were also not statistically significant. This means the choice of implant could be left to the surgeon's preferences or made according to cost.

Extending the Battery Life of the ZigBee Routers and Coordinator by Modifying Their Mode of Operation.

Wireless sensor networks proliferate more and more in all social scopes and sectors. Such networks are implemented in smart homes, smart cities, security systems, medical resources, agriculture, automotive industry, etc. Communication devices and sensors of such networks are powered with batteries: the enlarging of battery life is a hot research topic. We focus on wireless sensor networks based on ZigBee technology. While sleep standard operation mode is defined for end devices, it is not the case for the rest of devices (routers and Coordinator), which usually always remain in active mode. We designed a formal optimization model for maximizing the enlarging of the battery life of routers and Coordinator, allowing us to delimit practical successful conditions. It was successfully tested with a standard ZigBee datasheet comprising technical data for sensors, routers, and coordinators. It was tested in a practical wireless sensor network assembly with XBee S2C devices. We derived, from the previous model, a novel but simple protocol of communication among routers and coordinators. It was tested in different use cases. We showed that when end devices generate traffic at regular intervals, the enlarging of the battery life of routers and Coordinator was possible only under certain use cases.

Hardware Mechanism for Energy Saving in WiFi Access Points.

Wireless fidelity (WiFi) networks are deployed in several varied environments all around the World. Usually, the wireless fidelity access points are always on in houses and other small companies. In buildings of large companies and public organizations and in university campuses the number of access points is elevated; they are powered using power over the ethernet and are always on. Consequently, they consume a considerable amount of electric energy. The last versions of the International Electric and Electronic Engineers 802.11 standardized procedures to save energy in a wireless fidelity terminal but not in the access point. We designed a formal method to show when energy can be saved in wireless fidelity access points considering different power supplies for the access point: an electric energy battery and a standard voltage supply. We use an external battery that stores electric energy during an interval of time from a standard voltage supply (Charge period). After that interval (Discharge period), the energy supply for the access point is the external battery. Those intervals of time are repeated sequentially (Charge and Discharge cycles). We verified our formal model implementing a hardware circuit that controls the power supply for the access point. The amount of energy saving for a large number of of access points during a long period of time is considerably high.

Anatomical evaluation of the pedicle of the axis through computerized tomography in adults / Avaliação anatômica do pedículo do áxis através de tomografia computadorizada em adultos / Evaluación anatómica del pedículo del axis a través de la tomografía computarizada en adultos

ABSTRACT Objectives: The topography of the high cervical spine involves several traumatic, degenerative, and rheumatologic pathologies. With the evolution of surgical techniques and synthesis materials available for use in such region, an optimization of the anatomical understanding of this area is required. Methods: Therefore, this study evaluated 62 computed tomographies of the high cervical spine in an adult population, aiming at the study of the anatomical parameters of the axis pedicle. The measures analyzed in this observational study were pedicle length at axial section, pedicle length at sagittal section, pedicle thickness at axial section and interpedicular angulation. Results: Computed tomography is a necessary exam for the programming of C2 pedicle screws and is useful for determining the anatomical changes and evaluating the length of the screws that will be used. Furthermore, no statistically significant difference was observed in the length, angulation, and diameter of the pedicles of the axis in relation to sex or age. Conclusion: Regarding sex and age, no statistically significant difference on length, angulation, and pedicle diameter occur. There is an urgent need for computed tomography for surgical planning. Level of Evidence II; Transversal Diagnostic Studies - Investigation of a Diagnosis Test.

RESUMO Objetivos: A topografia da coluna cervical alta envolve diversas patologias de cunho traumático, degenerativo e reumatológico. Com a evolução de técnicas cirúrgicas e de materiais de síntese disponíveis para uso em tal região, é necessária uma otimização do entendimento anatômico desta área. Métodos: Assim, este estudo avaliou 62 tomografias computadorizadas da coluna cervical alta na população adulta, visando o estudo dos parâmetros anatômicos do pedículo do Áxis. Comprimento do pedículo no corte axial, comprimento do pedículo no corte sagital, espessura do pedículo no corte axial e angulação interpedicular foram as medidas analisadas neste estudo observacional. Resultados: A tomografia computadorizada mostra-se como um exame necessário para a programação da passagem de parafusos pediculares de C2, sendo útil para determinar as alterações anatômicas e avaliar o comprimento dos parafusos que irão ser utilizados. Também, não foram observadas diferenças estatisticamente significantes no comprimento, angulação e diâmetro dos pedículos do áxis em relação ao sexo. Conclusão: Não foram observadas diferenças estatisticamente significantes no comprimento, na angulação e no diâmetro dos pedículos. Urge a necessidade da Tomografia Computadorizada para o planejamento cirúrgico. Nível de Evidência II; Estudos Transversais de diagnósticos - Investigação de um exame para diagnóstico.

RESUMEN Objetivos: La topografía de la columna cervical alta involucra diversas patologías de origen traumático, degenerativo y reumatológico. Con la evolución de técnicas quirúrgicas y de materiales de síntesis disponibles para uso en tal región, es necesaria una optimización del entendimiento anatómico de esta área. Métodos: Así, este estudio evaluó 62 tomografías computarizadas de columna cervical alta en una población adulta, visando el estudio de los parámetros anatómicos del pedículo de axis. Las medidas analizadas en este estudio observacional fueron la longitud del pedículo en corte axial, la longitud del pedículo en corte sagital, el espesor del pedículo en corte axial y la angulación interpedicular. Resultados: La tomografía computarizada se muestra como un examen necesario para la programación del paso de tornillos pediculares de C2, siendo útil para determinar los cambios anatómicos y evaluar la longitud de los tornillos que se van a utilizar. Además, no se observó diferencias estadísticamente significativas en la longitud, angulación y diámetro de los pedículos del áxis en relación al sexo. Conclusión: En relación al sexo y edad no ocurren diferencias estadísticamente significativas en la longitud, la angulación y el diámetro de los pedículos. Urge la necesidad de la tomografía computarizada para la planificación quirúrgica. Nivel de Evidencia II; Estudios transversales de diagnóstico - Investigación de un examen para diagnóstico.

Identificación bioinformática de Polimorfismos de Nucleótido Simple (PNSs) en genes candidatos para las características de la fibra en alpacas (Vicugna pacos) / Bioinformatic identification of Single Nucleotide Polymorphisms (SNPs) in candidate genes for fiber characteristics in alpacas (Vicugna pacos)

El objetivo fue identificar y predecir la ubicación de polimorfismos de nucleótido simple (PNSs) en genes relacionados al crecimiento de la fibra. Se realizó el estudio con un total de 31 genes de queratina (KRT9, KRT12, KRT13, KRT14, KRT16, KRT18, KRT20, KRT25, KRT1, KRT3, KRT5, KRT6a, KRT6b, KRT6c, KRT7, KRT8, KRT71, KRT80, KRT31, KRT32, KIRT40, KRT81, KRT82, KRT10, KRT15, KRT17, KRT19, KRT2, KRT4, KRT79 y KRT83) asociados con las características de lana, fibra y pelo en ovinos, cabras y humanos respectivamente, cuyas secuencias fueron encontradas en la base de datos del National Center for Biotechnology Information (NCBI). Mediante el uso de bases de datos y herramientas bioinformáticas como el Conserved Domains Database, Spling, y MegaBlast se logró ubicar secuencias únicas para cada gen. Estas secuencias fueron comparadas con los genomas de referencia Vicugna_pacos-2.0.2 y Vi_pacos_V1.0. Se identificaron 48 PNSs ubicados en las regiones intrónicas y exónicas de 22 genes. No se localizaron PNSs en o alrededor de los genes KRT10, KRT15, KRT17, KRT19, KRT2, KRT4, KRT6b, KRT6c y KRT79. El análisis comparativo entre las cuatro especies estudiadas permitió observar que los genes KRT81, KRT6b y KRT6c no están presentes en los genomas de referencia de alpaca, los genes KRT31, KRT14, KRT81, KRT83, KRT6b y KRT6c no están presentes en el genoma de referencia de ovino y los genes KRT31, KRT13, KRT81, KRT83, KRT6b y KRT6c no están presentes en el genoma de referencia de cabra.

The objective was to identify and predict the location of single nucleotide polymorphisms (SNPs) in genes related to fiber growth. The study was carried out with 31 keratin genes (KRT9, KRT12, KRT13, KRT14, KRT16, KRT18, KRT20, KRT25, KRT1, KRT3, KRT5, KRT6a, KRT6b, KRT6c, KRT7, KRT8, KRT71, KRT80, KRT31, KRT32, KIRT40, KRT81, KRT82, KRT10, KRT15, KRT17, KRT19, KRT2, KRT4, KRT79 y KRT83) associated with wool, fiber and hair characteristics in sheep, goat and human, respectively. These gene sequences were retrieved from the National Center for Biotechnology Information (NCBI) database. Using databases and bioinformatics tools such as the Conserved Domains database, Spling and Megablast, unique sequences for each gene were identified. These sequences were compared to the reference genomes: Vicugna_pacos-2.0.2 and Vi_pacos_V1.0 to identify single nucleotide polymorphisms (SNPs). In this manner, 48 SNPs were identified and localized in both intronic and exonic regions of 22 genes. We did not identify SNPs for KRT10, KRT15, KRT17, KRT19, KRT2, KRT4, KRT6b, KRT6c and KRT79. Comparative analysis among the four species studied allow to identify that sequences for KRT81, KRT6b and KRT6c genes are not present in the alpaca reference genomes. Similarly, genes KRT31, KRT14, KRT81, KRT83, KRT6b and KRT6c are not present in the ovine reference genome and, genes KRT31, KRT13, KRT81, KRT83, KRT6b and KRT6c are not present in the goat reference genome.

Low Cost Efficient Deliverying Video Surveillance Service to Moving Guard for Smart Home.

Low-cost video surveillance systems are attractive for Smart Home applications (especially in emerging economies). Those systems use the flexibility of the Internet of Things to operate the video camera only when an intrusion is detected. We are the only ones that focus on the design of protocols based on intelligent agents to communicate the video of an intrusion in real time to the guards by wireless or mobile networks. The goal is to communicate, in real time, the video to the guards who can be moving towards the smart home. However, this communication suffers from sporadic disruptions that difficults the control and drastically reduces user satisfaction and operativity of the system. In a novel way, we have designed a generic software architecture based on design patterns that can be adapted to any hardware in a simple way. The implanted hardware is of very low economic cost; the software frameworks are free. In the experimental tests we have shown that it is possible to communicate to the moving guard, intrusion notifications (by e-mail and by instant messaging), and the first video frames in less than 20 s. In addition, we automatically recovered the frames of video lost in the disruptions in a transparent way to the user, we supported vertical handover processes and we could save energy of the smartphone's battery. However, the most important thing was that the high satisfaction of the people who have used the system.

Interference Effects Redress over Power-Efficient Wireless-Friendly Mesh Networks for Ubiquitous Sensor Communications across Smart Cities.

Ubiquitous sensing allows smart cities to take control of many parameters (e.g., road traffic, air or noise pollution levels, etc.). An inexpensive Wireless Mesh Network can be used as an efficient way to transport sensed data. When that mesh is autonomously powered (e.g., solar powered), it constitutes an ideal portable network system which can be deployed when needed. Nevertheless, its power consumption must be restrained to extend its operational cycle and for preserving the environment. To this end, our strategy fosters wireless interface deactivation among nodes which do not participate in any route. As we show, this contributes to a significant power saving for the mesh. Furthermore, our strategy is wireless-friendly, meaning that it gives priority to deactivation of nodes receiving (and also causing) interferences from (to) the rest of the smart city. We also show that a routing protocol can adapt to this strategy in which certain nodes deactivate their own wireless interfaces.

Mobile sensing systems.

Rich-sensor smart phones have made possible the recent birth of the mobile sensing research area as part of ubiquitous sensing which integrates other areas such as wireless sensor networks and web sensing. There are several types of mobile sensing: individual, participatory, opportunistic, crowd, social, etc. The object of sensing can be people-centered or environment-centered. The sensing domain can be home, urban, vehicular… Currently there are barriers that limit the social acceptance of mobile sensing systems. Examples of social barriers are privacy concerns, restrictive laws in some countries and the absence of economic incentives that might encourage people to participate in a sensing campaign. Several technical barriers are phone energy savings and the variety of sensors and software for their management. Some existing surveys partially tackle the topic of mobile sensing systems. Published papers theoretically or partially solve the above barriers. We complete the above surveys with new works, review the barriers of mobile sensing systems and propose some ideas for efficiently implementing sensing, fusion, learning, security, privacy and energy saving for any type of mobile sensing system, and propose several realistic research challenges. The main objective is to reduce the learning curve in mobile sensing systems where the complexity is very high.