Emergence of CuInS2 derived photocatalyst for environmental remediation and energy conversion.

Hydrogen production, catalytic organic synthesis, carbon dioxide reduction, environmental purification, and other major fields have all adopted photocatalytic technologies due to their eco-friendliness, ease of use, and reliance on sunlight as the driving force. Photocatalyst is the key component of photocatalytic technology. Thus, it is of utmost importance to produce highly efficient, stable, visible-light-responsive photocatalysts. CIS stands out among other visible-light-response photocatalysts for its advantageous combination of easy synthesis, non-toxicity, high stability, and suitable band structure. In this study, we took a brief glance at the synthesis techniques for CIS after providing a quick introduction to the fundamental semiconductor features, including the crystal and band structures of CIS. Then, we discussed the ways doping, heterojunction creation, p-n heterojunction, type-II heterojunction, and Z-scheme may be used to modify CIS's performance. Subsequently, the applications of CIS towards pollutant degradation, CO2 reduction, water splitting, and other toxic pollutants remediation are reviewed in detail. Finally, several remaining problems with CIS-based photocatalysts are highlighted, along with future potential for constructing more superior photocatalysts.

Integrating K and P co-doped g-C3N4 with ZnFe2O4 and graphene oxide for S-scheme-based enhanced adsorption coupled photocatalytic real wastewater treatment.

Recently, there has been a significant increase in the interest of using photocatalysis for environmental clean-up applications. In this research, potassium, and phosphorus co-doped graphitic carbon nitride (KPCN) photocatalyst modified with graphene oxide (GO) and heterostructured with ZnFe2O4 was synthesized via the hydrothermal method (KPCN/GO/ZnFe2O4). The photoactivity of KPCN/GO/ZnFe2O4 photocatalyst was examined for the photocatalytic degradation of target pollutants such as methylene blue (MB) dye, rhodamine B (RhB) dye, and tetracycline (TC) antibiotic. Furthermore, the chemical oxygen demand (COD) removal efficiency for real wastewater was determined to explore the practical application of KPCN/GO/ZnFe2O4 photocatalyst. The degradation efficiencies of bare graphitic carbon nitride, KPCN, KPCN/GO, and KPCN/GO/ZnFe2O4 photocatalysts for tetracycline antibiotics were 30%, 42%, 57%, and 87% within 60 min, respectively. Moreover, KPCN/GO/ZnFe2O4 photocatalyst showed 71% COD removal efficiency within 240 min. The •OH and •O2- were the major reactive species in the photocatalytic process. Results showed that the degradation efficiencies of graphitic carbon nitride were greatly enhanced upon doping and further improved with the addition of GO and ZnFe2O4. Doping improved light harvesting, GO enhanced the adsorption ability and heterojunction with ZnFe2O4 enhanced the charge separation as well as the reusability of synthesized KPCN/GO/ZnFe2O4 photocatalyst.

Potential of novel dual Z-scheme carbon quantum dots decorated MnIn2S4/CdS/Bi2S3 heterojunction for environmental applications.

In this work, CQDs decorated MnIn2S4/CdS/Bi2S3 heterojunction was prepared successfully by hydrothermal technique for photocatalytic disinfection of Escherichia coli (E. coli) and mineralization of methyl orange (MO) dye. The charge transferal route and mineralization process in CQDs-MnIn2S4/CdS/Bi2S3 heterojunction were comprehensively investigated by advanced spectroscopic techniques. The improved visible-light activity and enhanced photo-generated charge transferal efficacy caused dual Z-scheme CQDs-MnIn2S4/CdS/Bi2S3 heterojunction to achieve boosted photodegradation ability. The catalytic degradation trend was followed as CQDs-MnIn2S4/CdS/Bi2S3 > MnIn2S4 > CdS > Bi2S3. The dye was mineralized within 180 min under visible light irradiation. The effect of reaction parameters, pH effect, catalyst dosage, and H2O2 addition on MO degradation was also investigated. The degradation rate was maximal at pH 4 with a pseudo-first-order rate constant, 0.0438 min-1. The assessment of antibacterial properties revealed that CQDs-MnIn2S4/CdS/Bi2S3 composite effectively inactivated E. coli under visible light. Scavenging experiments, transient photocurrent response, and electron spin resonance spectroscopy suggested that •[Formula: see text] and holes were the dominant reactive species. The Z-scheme heterojunction is recyclable up to ten photocatalytic cycles according to recycling experiments. This research indicates the importance of dual Z-scheme CQDs decorated MnIn2S4/CdS/Bi2S3 heterojunction in wastewater remediation.

An overview on ZnO-based sonophotocatalytic mitigation of aqueous phase pollutants.

Over the past several decades, the increase in industrialization provoked the discharge of harmful pollutants into the environment, affecting human beings and ecosystems. ZnO-based photocatalysts seem to be the most promising photocatalysts for treating harmful pollutants. However, fast charge carrier recombination, photo corrosion, and long reaction time are the significant factors that reduce the photoactivity of ZnO-based photocatalysts. In order to enhance the photoactivity of such photocatalysts, a combined process i.e., sonocatalysis + photocatalysis = sonophotocatalysis was used. Sonophotocatalysis is one of several different AOP methods that have recently drawn considerable interest, as it produces high reactive oxygen species (ROS) which helps in the oxidation of pollutants by acoustic cavitation. This combined technique enhanced the overall efficiency of the individual method by overcoming its limiting factors. The current review aims to present the theoretical and fundamental aspects of sonocatalysis and photocatalysis along with a detailed discussion on the benefits that can be obtained by the combined process i.e., US + UV (sonophotocatalysis). Also, we have provided a comparison of the excellent performance of ZnO to that of the other metal oxides. The purpose of this study is to discuss the literature concerning the potential applications of ZnO-based sonophotocatalysts for the degradation of pollutants i.e., dyes, antibiotics, pesticides, phenols, etc. That are carried out for future developments. The role of the produced ROS under light and ultrasound stimulation and the degradation mechanisms that are based on published literature are also discussed. In the end, future perspectives are suggested, that are helpful in the development of the sonophotocatalysis process for the remediation of wastewater containing various pollutants.

Constructing α-Fe2O3/g-C3N4/SiO2 S-scheme-based heterostructure for photo-Fenton like degradation of rhodamine B dye in aqueous solution.

This work successfully fabricated graphitic carbon nitride and magnetically recoverable α-Fe2O3/g-C3N4/SiO2 photo-Fenton catalysts using thermal polycondensation and in situ-simple precursor drying-calcination process, respectively, was examined for model synthetic rhodamine B (RhB) dye in the presence of H2O2 and acidic pH under simulated visible light irradiation. An aqueous suspension of the reaction mixture of dye-containing wastewater was fully degraded and reached 97% of photo-Fenton degradation efficiency within 120 min followed by the production of hydroxyl radical (•OH). The dominant hydroxyl radical position generated surface charge, electrostatic potential distribution, and average local ionization potential, which contributed to the complete mineralization of RhB dye, according to the density functional theory (DFT) calculations. HPLC and GCMS experiments were performed to examine the degradation fragments of RhB and draw a plausible mechanistic pathway which showed that RhB degradation generated a series of N-deethylated products, followed by a one-time ring-opening, which indicated that photosensitization induced a photocatalysis reaction mechanism.

Recent advances in cellulose supported photocatalysis for pollutant mitigation: A review.

In recent times, green chemistry or "green world" is a new and effective approach for sustainable environmental remediation. Among all biomaterials, cellulose is a vital material in research and green chemistry. Cellulose is the most commonly used natural biopolymer because of its distinctive and exceptional properties such as reproducibility, cost-effectiveness, biocompatibility, biodegradability, and universality. Generally, coupling cellulose with other nanocomposite materials enhances the properties like porosity and specific surface area. The polymer is environment-friendly, bioresorbable, and sustainable which not only justifies the requirements of a good photocatalyst but boosts the adsorption ability and degradation efficiency of the nanocomposite. Hence, knowing the role of cellulose to enhance photocatalytic activity, the present review is focused on the properties of cellulose and its application in antibiotics, textile dyes, phenol and Cr(VI) reduction, and degradation. The work also highlighted the degradation mechanism of cellulose-based photocatalysts, confirming cellulose's role as a support material to act as a sink and electron mediator, suppressing the charge carrier's recombination rate and enhancing the charge migration ability. The review also covers the latest progressions, leanings, and challenges of cellulose biomaterials-based nanocomposites in the photocatalysis field.

Graphitic carbon nitride based immobilized and non-immobilized floating photocatalysts for environmental remediation.

In solar photocatalysis, light utilization and recycling of powder from reaction solution are the main obstructions that hinder the photocatalytic efficacy of any photocatalyst. In this respect, a floatable system is effective for efficient solar photocatalysis by light utilization. Due to the maximum solar light absorption property, floating nanocomposite photocatalyst is an appealing substitute for effective wastewater treatment. Floating photocatalysts are a non-oxygenated and non-stirred solution that is a good light harvester, stable, non-toxic, biodegradable, naturally abundant in nature. They also have low density, a simple preparation process, no need to stir, and high porosity. Due to these characteristics, floating photocatalysts are widely favored and ideal candidates for practical environmental remediation. Several researchers have come up with new and innovative ways for immobilizing capable photocatalyst on a floatable substrate to produce floating nanocomposite photocatalytic material. In recent decades, g-C3N4-based floating photocatalysts have gained a lot of attention as g-C3N4 is a visible light active photocatalyst with unique and exceptional properties. It also has good photocatalytic activity in waste water treatment and environmental remediation. Many previous reports have studied the logical design and manufacturing method for heterojunction floating photocatalysts and immobilized floating photocatalysts. Based on those studies, we have focused on the g-C3N4 based immobilized and non-immobilized floating photocatalysts for pollutant degradation. We have also categorized immobilized floating photocatalyst based on several lightweight substrates such as expanded perlite and glass microbead. In addition, future challenges have been discussed to maximize solar light absorption and to improve the efficiency of broadband response floating photocatalysts. Floating photocatalysis is an advanced technique in energy conversion and environmental remediation thus requires special consideration.

The practicality and prospects for disinfection control by photocatalysis during and post-pandemic: A critical review.

The prevalence of global health implications from the COVID-19 pandemic necessitates the innovation and large-scale application of disinfection technologies for contaminated surfaces, air, and wastewater as the significant transmission media of disease. To date, primarily recommended disinfection practices are energy exhausting, chemical driven, and cause severe impact on the environment. The research on advanced oxidation processes has been recognized as promising strategies for disinfection purposes. In particular, semiconductor-based photocatalysis is an effective renewable solar-driven technology that relies on the reactive oxidative species, mainly hydroxyl (•OH) and superoxide (•O2-) radicals, for rupturing the capsid shell of the virus and loss of pathogenicity. However, the limited understanding of critical aspects such as viral photo-inactivation mechanism, rapid virus mutagenicity, and virus viability for a prolonged time restricts the large-scale application of photocatalytic disinfection technology. In this work, fundamentals of photocatalysis disinfection phenomena are addressed with a reviewed remark on the reported literature of semiconductor photocatalysts efficacies against SARS-CoV-2. Furthermore, to validate the photocatalysis process on an industrial scale, we provide updated data on available commercial modalities for an effective virus photo-inactivation process. An elaborative discussion on the long-term challenges and sustainable solutions is suggested to fill in the existing knowledge gaps. We anticipate this review will ignite interest among researchers to pave the way to the photocatalysis process for disinfecting virus-contaminated environments and surfaces for current and future pandemics.

Strategies based review on near-infrared light-driven bismuth nanocomposites for environmental pollutants degradation.

Recently, solar energy has been considered the most vulnerable source to resolve environmental pollution and energy scarcity problems. Researchers have made intense research efforts to convert solar energy into chemical energy through photocatalysis processes as it is a green, clean and renewable energy source. Numerous discovered photocatalysts show absorption in the ultraviolet-visible (UV∼5% and visible ∼43%) region and are devoid of near-infrared (NIR ∼52%) light utilization. As infrared (IR) light contains a top portion of the solar spectrum; therefore, many alluring and attractive practical strategies have been explored to improve photocatalytic reactions and to harness full solar spectrum (including NIR light). Among those strategies, bandgap engineering, coupling with carbon quantum dots, heterostructure formation, mingling with plasmonic and upconversion (UC) NPs are more worthwhile. In different visible light-assisted photocatalysts, bismuth typically covers a distinctive, favorable, and earth-abundant group of freshly discovered innovative photocatalytic nanomaterials. Bi-based photocatalysts have suitable/good optoelectronic properties, crystalline geometric conformations, amendable electronic structure, and outstanding visible-light responsive range, helpful in environmental remediation and energy transformation. Due to the outstanding photo-oxidization/photodegradation capability of NIR-driven photocatalysts, bismuth-based nanomaterials have been considered suitable photocatalysts for inclusive solar energy utilization. Henceforth, keeping in mind the benefits of bismuth nanomaterials, the present review is focused on NIR-based modification strategies to upgrade solar light absorption of bismuth-based photocatalysts in the NIR region by making it NIR responsive photocatalyst. We have also discussed the photocatalytic applications of bismuth-based NIR responsive photocatalysts in pollutant degradation.