ABSTRACT
PURPOSE: Intramedullary (IM) screw fixation is gaining popularity in the treatment of metacarpal fractures. Despite its rapid adoption, there is a paucity of evidence regarding parameters to optimize effectiveness. This study aimed to quantify the relationship between stability, IM screw size, and canal fill using a cadaveric model. METHODS: Thirty cadaveric metacarpals (14 index, 13 middle, and three ring fingers; mean age: 58.3 years, range: 48-70) were selected to allow for canal fill ratios of 0.7-1.1 for screws sized 3.0, 3.5, and 4.5 mm. Metacarpals underwent a 45° volar-dorsal osteotomy at the midpoint before fixation with an IM screw. Specimens were subjected to 100 cycles of loading at 10 N, 20 N, and 30 N before load-to-failure testing. Correlation coefficients for angular displacement on the final cycle at each load, peak load to failure, and average stiffness were assessed. RESULTS: Correlation coefficients for the angular displacement on the 100th cycle were as follows: 10 N, R = 0.62, 20 N, R = 0.57, and 30N, R = 0.58. Correlation values for peak load to failure as a function of canal fit were as follows: 3.0 mm, R = 0.5, 3.5 mm, R = 0.17, and 4.5 mm, R = 0.44. The canal fill ratio that intersected the line-of-best fit at an angular deformity of 10° was 0.74. Average peak forces for 3.0-, 3.5-, and 4.5-mm screws were 79.5, 136.5, and 179.6 N, respectively. Average stiffness for each caliber was 14.8, 33.4, and 52.3 N/mm. CONCLUSIONS: Increasing screw diameter and IM fill resulted in more stable fixation, but marginal gains were seen in ratios >0.9. A minimum fill ratio of 0.74 was sufficient to withstand forces of early active motion with angular deformity <10°. CLINICAL RELEVANCE: An understanding of the relationship of IM fill ratio of metacarpal screws to fracture stability may provide a framework for clinicians to optimally size these implants.
ABSTRACT
BACKGROUND: Early detection of Lisfranc injury is critical for improving clinical outcomes, but diagnosing subtle injury can be difficult. Weightbearing computed tomography (WBCT) allows evaluation of such injuries in 3 dimensions (3D) under physiologic load. This study aimed to assess the utility of 1-, 2-, and 3-dimensional measurements on WBCT to diagnose subtle injury in isolated ligamentous Lisfranc injuries. METHODS: Ten cadaveric specimens underwent WBCT evaluation of the Lisfranc joint complex in the intact state and subsequently with sequential sectioning of the dorsal Lisfranc ligament and interosseous Lisfranc ligament (IOL) to create subtle Lisfranc injury, and finally after transectioning of plantar Lisfranc ligament (PLL) to create the injury conditions for complete ligamentous Lisfranc injury. Measurements under static vertical tibial load of 80 kg were performed on WBCT images including (1) Lisfranc joint (medial cuneiform-base of second metatarsal) volume, (2) Lisfranc joint area, (3) C1-C2 intercuneiform area, (4) C1-M2 distance, (5) C1-C2 distance, (6) M1-M2 intermetatarsal distance, (7) first tarsometatarsal (TMT1) alignment, (8) second tarsometatarsal (TMT2) alignment, (9) TMT1 dorsal step-off distance, and (10) TMT2 dorsal step-off distance. RESULTS: In the subtle Lisfranc injury state, Lisfranc joint volume and area, C1-M2 distance, and M1-M2 distance measurements on WBCT significantly increased, when compared with the intact state (P values .001 to .014). Additionally, Lisfranc joint volume and area, C1-M2 distance, M1-M2 distance, TMT2 alignment, and TMT2 dorsal step-off measurements were increased in the complete Lisfranc injury state. Of all measurements, C1-M2 distance had the largest area under the curve (AUC) of 0.96 (sensitivity = 90%; specificity = 90%), followed by Lisfranc volume (AUC = 0.90; sensitivity = 80%; specificity = 80%) and Lisfranc area (AUC = 0.89; sensitivity = 80%; specificity = 100%). CONCLUSION: In a cadaveric model we found that WBCT scan can increase the diagnostic accuracy for subtle Lisfranc injury. Among the measurements, C1-M2 distance exhibited the highest level of accuracy. The 2D joint area and 3D joint volume also proved to be accurate, with 3D volume measurements of the Lisfranc joint displaying the most significant absolute difference between the intact state and increasing severity of Lisfranc injury. These findings suggest that 2D joint area and 3D joint volume may have potential as supplementary measurements to more accurately diagnose subtle Lisfranc injuries. CLINICAL RELEVANCE: WBCT may help surgeons detect subtle Lisfranc injuries.
ABSTRACT
BACKGROUND: The objective of this study was to examine the effect of wrist rotation on the scapholunate interval in the posteroanterior radiograph and to identify radiographic landmarks on the posteroanterior projection that can be used to assess position. METHODS: Eleven healthy cadaveric wrists were radiographed in the neutral position and subsequently were rotated and imaged from 30° pronation to 30° supination in 10° intervals. At each interval, the scapholunate interval was measured as well as the following landmarks: (1) the visible perimeter of the base of the hook of the hamate; (2) the radial-ulnar distribution of the dorsal nonarticular surface of the distal third metacarpal head; (3) the radial-ulnar distribution of the pisiform about the longitudinal axis of the ulna; and (4) the overlap of the pisiform and triquetrum. RESULTS: The scapholunate interval was largest in the neutral position and linearly decreased by 34% for every 10° of pronation and decreased nonlinearly by 86% after the first 10° of supination. The appearance of the distal third metacarpal head was shown to be sensitive to both pronation and supination. The perimeter of the hook of the hamate and the distribution of the pisiform compared to the ulna were both shown to be sensitive to supination, whereas overlap of the pisiform and triquetrum was not shown to be sensitive to either direction of rotation. CONCLUSIONS: Our results highlight the significant effect of rotation on radiographic landmarks at the wrist, indicating that 10° of supination can drastically alter the developed radiograph.
ABSTRACT
BACKGROUND: In recent years, ChatGPT has become a popular source of information online. Physicians need to be aware of the resources their patients are using to self-inform of their conditions. This study investigates physician-graded accuracy and completeness of ChatGPT regarding various questions patients are likely to ask the artificial intelligence (AI) system concerning common upper limb orthopedic conditions. METHODS: ChatGPT 3.5 was interrogated concerning 5 common orthopedic hand conditions: carpal tunnel syndrome, Dupuytren contracture, De Quervain tenosynovitis, trigger finger, and carpal metacarpal arthritis. Questions evaluated conditions' symptoms, pathology, management, surgical indications, recovery time, insurance coverage, and workers' compensation possibility. Each topic had 12 to 15 questions and was established as its own ChatGPT conversation. All questions regarding the same diagnosis were presented to the AI, and its answers were recorded. Each question was then graded for both accuracy (Likert scale of 1-6) and completeness (Likert scale of 1-3) by 10 fellowship trained hand surgeons. Descriptive statistics were performed. RESULTS: Overall, the mean accuracy score for ChatGPT's answers to common orthopedic hand diagnoses was 4.83 out of 6 ± 0.95. The mean completeness of answers was 2 out of 3 ± 0.59. CONCLUSIONS: Easily accessible online AI such as ChatGPT is becoming more advanced and thus more reliable in its ability to answer common medical questions. Physicians can anticipate such online resources being mostly correct, however incomplete. Patients should beware of relying on such resources in isolation.
ABSTRACT
Concerns about implant durability and technical difficulty continue to make total wrist arthroplasties a specialized procedure with a narrow scope of indications. As a result, more routinely performed total or partial wrist arthrodesis continues to maintain popularity over arthroplasty. However, wrist motion preservation is undoubtedly preferable for patients and current literature is trending to more favorable outcomes for total wrist arthroplasties. In the setting of the evolving role of wrist arthroplasties in clinical practice, it is important to focus on providing hand surgeons a practical approach to incorporating total wrist arthroplasty into the treatment toolbox available to them when treating patients with painful wrist arthritis.