Constructing the Polymer Molecules to Regulate the Electrode/Electrolyte Interface to Enhance Lithium-Metal Battery Performance.

Lithium-ion batteries, with high energy density and long cycle life, have become the battery of choice for most vehicles and portable electronic devices; however, energy density, safety and cycle life require further improvements. Single-functional group electrolyte additives are very limited in practical applications, a ternary polymer bifunctional electrolyte additive copolymer (acrylonitrile-butyl hexafluoro methacrylate- poly (ethylene glycol) methacrylate- methyl ether) (PMANHF) was synthesized by free radical polymerization of acrylonitrile, 2, 2, 3, 4, 4, 4-hexafluorobutyl methacrylate and poly (ethylene glycol) methyl ether methacrylate. A series of characterizations show that in Li metal anodes, the preferential reduction of PMANHF is conducive to the formation of a uniform and stable solid electrolyte interphase layer, and Li deposition is uniform and dense. At the NCM811 cathode, a film composed of LiF- and Li3N-rich is formed at the cathode-electrolyte interface, mitigating the side reaction at the interface. At 1.0 mA cm-2, the Li/Li cell can be stabilized for 1000 cycles. In addition, the Li/NCM811 cell can stabilize 200 cycles with a cathode capacity of 153.7 mAh g-1, with the capacity retention of 89.93 %, at a negative/positive capacity ratio of 2.5. This study brings to light essential ideas for the fabrication of additives for lithium-metal batteries.

Solid Electrolyte Interphase Structure Regulated by Functional Electrolyte Additive for Enhancing Li Metal Anode Performance.

Lithium (Li) metal anodes have become an important component of the next generation of high energy density batteries. However, the Li metal anode still has problems such as Li dendrite growth and unstable solid electrolyte interface layer. Herein, we present a functional electrolyte additive (PANHF) successfully synthesized from acrylonitrile and hexafluorobutyl methacrylate via a polymerization reaction. With extensive analytical characterization, it is found that the PANHF can improve the reversibility and Coulombic efficiency of the Li deposition/dissolution reaction and prevent the growth of Li dendrites by forming a solid electrolyte interphase rich in organic matter on the outer layer and LiF on the inner layer. The results show that the cycling performance of the Li/Li cell was greatly improved in the electrolyte containing 0.5 wt % PANHF. Specifically, the cycling stability of more than 700 cycles was achieved at a current density of 1.0 mA cm-2. Moreover, the Li/NCM811 cell with 0.5 wt % PANHF has a higher capacity of 137.7 mA h g-1 at 1.0 C and a capacity retention of 83.41% after 200 cycles. This work highlights the importance of protecting the Li metal anode with functional bipolymer additives for next-generation Li metal batteries.

Surface modification using heptafluorobutyric acid to produce highly stable Li metal anodes.

The Li metal is an ideal anode material owing to its high theoretical specific capacity and low electrode potential. However, its high reactivity and dendritic growth in carbonate-based electrolytes limit its application. To address these issues, we propose a novel surface modification technique using heptafluorobutyric acid. In-situ spontaneous reaction between Li and the organic acid generates a lithiophilic interface of lithium heptafluorobutyrate for dendrite-free uniform Li deposition, which significantly improves the cycle stability (Li/Li symmetric cells >1200 h at 1.0 mA cm-2) and Coulombic efficiency (>99.3%) in conventional carbonate-based electrolytes. This lithiophilic interface also enables full batteries to achieve 83.2% capacity retention over 300 cycles under realistic testing condition. Lithium heptafluorobutyrate interface acts as an electrical bridge for uniform lithium-ion flux between Li anode and plating Li, which minimizes the occurrence of tortuous lithium dendrites and lowers interface impedance.