ABSTRACT
Effective dewatering of sewage sludge could potentially address the issues of high energy consumption and large carbon footprint inherent in the sludge treatment process, advancing toward carbon neutrality in environmental remediation. Yet, the surface hydrophilic characteristics and water-holding interfacial affinity in sludge led to dwindled sludge-water separation performance. Here, the integration of in-situ generation of iron from zero-valent scrap iron (ZVSI) and sodium percarbonate (SPC) was attempted to attenuate the water-retaining interfacial affinity within sludge, thus achieving superior sludge dewatering performance. Results showed that under the optimal conditions, the ZVSI + SPC system led to a remarkable decline of 76.09 % in the specific resistance to filtration of the sludge, accompanied by a notable decline of 34.96 % in the water content. Moreover, the utilization of ZVSI + SPC system could be a viable alternative to the traditional strategies in terms of enhanced sludge dewaterability, offering application potential with stable operating performance, economic feasibility, and reduced carbon emissions. Investigation into dewatering mechanism revealed that ZVSI could maintain the Fe3+/Fe2+ in a stable dynamic cycle and continuously in-situ generate Fe2+, thereby efficaciously fostering the SPC activation for the ceaseless yield of reactive oxygen species. The predominant â¢OH and 1O2 efficiently decomposed the hydrophilic biopolymers, therefore minimizing the hydrophilic protein secondary structures, along with the hydrogen and disulfide bonds within proteins. Subsequently, the water-holding interfacial affinity was profoundly diminished, leading to intensified hydrophobicity, self-flocculation, and dewaterability. These findings have important implications for the advancement of efficacious ZVSI + SPC conditioning techniques toward sustainable energy and low-carbon prospects.
ABSTRACT
Bioleaching technologies have been shown to be an environmentally friendly and economically beneficial tool for extracting metals from spent lithium-ion batteries (LIBs). However, conventional bioleaching methods have exhibited low efficiency in recovering metals from spent LIBs. Therefore, relied on the sustainability principle of using waste to treat waste, this study employed pyrite (FeS2) as an energy substance with reducing properties and investigated its effects in combination with elemental sulfur (S0) or FeSO4 on metals bioleaching from spent LIBs. Results demonstrated that the bioleaching efficiency was significantly higher in the leaching system constructed with FeS2 + S0, than in the FeS2 + FeSO4 or FeS2 system. When the pulp densities of FeS2, S0 and spent LIBs were 10 g L-1, 5 g L-1 and 10 g L-1, respectively, the leaching efficiency of Li, Ni, Co and Mn all reached 100%. Mechanistic analysis reveals that in the FeS2 + S0 system, the activity and acid-producing capabilities of iron-sulfur oxidizing bacteria were enhanced, promoting the generation of Fe (â ¡) and reducible sulfur compounds. Simultaneously, bio-acids were shown to disrupt the structure of the LIBs, thereby increasing the contact area between Fe (â ¡) and sulfur compounds containing high-valence metals. This effectively promoted the reduction of high-valence metals, thereby enhancing their leaching efficiency. Overall, the FeS2 + S0 bioleaching process constructed in this study, improved the leaching efficiency of LIBs while also effectively utilizing waste, providing technical support for the comprehensive and sustainable management of solid waste.
Subject(s)
Iron , Lithium , Sulfides , Lithium/chemistry , Metals , Sulfur , Sulfur Compounds , Electric Power Supplies , RecyclingABSTRACT
In this study, catalytic ozonation by Fe-Al2O3 was used to investigate the defluorination of PFOA and PFOS, assessing the effects of different experimental conditions on the defluorination efficiency of the system. The oxidation mechanism of the Fe-Al2O3/O3 system and the specific degradation and defluorination mechanisms for PFOA and PFOS were determined. Results showed that compared to the single O3 system, the defluorination rates of PFOA and PFOS increased by 2.32- and 5.92-fold using the Fe-Al2O3/O3 system under optimal experimental conditions. Mechanistic analysis indicated that in Fe-Al2O3, the variable valence iron (Fe) and functional groups containing C and O served as important reaction sites during the catalytic process. The co-existence of 1O2, OH, O2- and high-valence Fe(IV) constituted a synergistic oxidation system consisting of free radicals and non-radicals, promoting the degradation and defluorination of PFOA and PFOS. DFT theoretical calculations and the analysis of intermediate degradation products suggested that the degradation pathways of PFOA and PFOS involved Kolbe decarboxylation, desulfonation, alcoholization and intramolecular cyclization reactions. The degradation and defluorination pathways of PFOA and PFOS consisted of the stepwise removal of -CF2-, with PFOS exhibiting a higher defluorination rate than PFOA due to its susceptibility to electrophilic attack. This study provides a theoretical basis for the development of heterogeneous catalytic ozonation systems for PFOA and PFOS treatment.
ABSTRACT
Herein, a facile combination approach of chalcopyrite and sodium percarbonate (CuFeS2+ SPC) was established to augment both TCC removal efficiency and sludge dewatering. Results showed that utilizing the CuFeS2 dosage of 600 mg/g total solids (TS) under the optimal condition, along with the SPC dosage of 12.5 mg/g TS, an initial pH of 4.0, and a reaction duration of 40 min, led to a substantial reduction of 53.9% in the TCC content within the sludge, accompanied by a notable decrease of 36.9% in the water content. Compared to well-studied iron-based advanced oxidation processes, CuFeS2 + SPC treatment proved to be more cost-effective and environmentally friendly. Mechanistic findings demonstrated that â¢OH oxidation played a significant role in TCC removal, with O2â¢- and 1O2 acting as secondary factors. During the CuFeS2 + SPC process, the received â¢OH, O2â¢-, and 1O2 destroyed the main binding sites of extracellular polymeric substances to TCC, including tryptophan-like protein, amide, CO stretch, and -COO- functional groups. As a result, approximately 50% of TCC was partially degraded within the solid sludge phase after the attack of radicals. Meanwhile, the decreased macromolecular organic compounds in solid sludge attenuated the binding efficacy of TCC, giving rise to the transfer of partial TCC to the liquid phase. Ultimately, the TCC in sludge was successfully removed, and five transformation products were identified. This study significantly contributes to our understanding regarding TCC transformation and removal in the sludge conditioning process.
Subject(s)
Carbonates , Sewage , Sewage/chemistry , Oxidation-Reduction , Water , Waste Disposal, FluidABSTRACT
Partial nitrification is a key aspect of efficient nitrogen removal, although practically it suffers from long start-up cycles and unstable long-term operational performance. To address these drawbacks, this study investigated the effect of low intensity ultrasound treatment combined with hydroxylamine (NH2OH) on the performance of partial nitrification. Results show that compared with the control group, low-intensity ultrasound treatment (0.10 W/mL, 15 min) combined with NH2OH (5 mg/L) reduced the time required for partial nitrification initiation by 6 days, increasing the nitrite accumulation rate (NAR) and ammonia nitrogen removal rate (NRR) by 20.4% and 6.7%, respectively, achieving 96.48% NRR. Mechanistic analysis showed that NH2OH enhanced ammonia oxidation, inhibited nitrite-oxidizing bacteria (NOB) activity and shortened the time required for partial nitrification initiation. Furthermore, ultrasonication combined with NH2OH dosing stimulated EPS (extracellular polymeric substances) secretion, increased carbonyl, hydroxyl and amine functional group abundances and enhanced mass transfer. In addition, 16S rRNA gene sequencing results showed that ultrasonication-sensitive Nitrospira disappeared from the ultrasound + NH2OH system, while Nitrosomonas gradually became the dominant group. Collectively, the results of this study provide valuable insight into the enhancement of partial nitrification start-up during the process of wastewater nitrogen removal.
Subject(s)
Ammonia , Nitrification , Hydroxylamine , Nitrites , Feasibility Studies , RNA, Ribosomal, 16S , Oxidation-Reduction , Bioreactors/microbiology , Hydroxylamines , Bacteria/genetics , Nitrogen , SewageABSTRACT
Biochar is a valuable adsorbent for the removal of heavy metals from water, and it is important to explore ways to increase its heavy metal adsorption capacity. In this study, Mg/Fe bimetallic oxide was loaded onto sewage sludge-derived biochar to enhance its heavy metal adsorption capacity. Batch adsorption experiments for the removal of Pb(II) and Cd(II) were performed to evaluate the removal efficiency of Mg/Fe layer bimetallic oxide-loaded sludge-derived biochar ((Mg/Fe)LDO-ASB). The physicochemical properties of (Mg/Fe)LDO-ASB and corresponding adsorption mechanisms were studied. The maximum adsorption capacities of (Mg/Fe)LDO-ASB for Pb(II) and Cd(II), which were calculated by isotherm model, were 408.31 and 270.41 mg/g, respectively. Adsorption kinetics and isotherms analysis showed that the dominant adsorption process of Pb(II) and Cd(II) uptake by (Mg/Fe)LDO-ASB was spontaneous chemisorption and heterogeneous multilayer adsorption, and film diffusion was the rate-limiting step. SEM-EDS, FTIR, XRD, and XPS analyses revealed that the Pb and Cd adsorption processes of (Mg/Fe)LDO-ASB involved oxygen-containing functional group complexation, mineral precipitation, electron-π-metal interactions, and ion exchange. The order of their contribution was as follows: mineral precipitation (Pb: 87.92% and Cd: 79.91%) > ion exchange (Pb: 9.84% and Cd: 16.45%) > metal-π interaction (Pb: 0.85% and Cd: 0.73%) > oxygen-containing functional group complexation (Pb: 1.39% and Cd: 2.91%). Mineral precipitation was the main adsorption mechanism, and ion exchange played a crucial role in Pb and Cd adsorption.
Subject(s)
Metals, Heavy , Water Pollutants, Chemical , Sewage , Cadmium/analysis , Lead , Kinetics , Adsorption , Oxides , Charcoal/chemistry , Minerals , Water Pollutants, Chemical/analysisABSTRACT
Despite the growing demand for resource recovery from spent lithium-ion batteries (LIBs) by bioleaching, low Co leaching efficiency has hindered the development and application of this technology. Therefore, a novel process was designed, combining gallic acid (GA) and mixed culture bioleaching (MCB), to enhance the removal of metals from spent LIBs. Results indicated that the GA + MCB process achieved 98.03% Co and 98.02% Li leaching from spent LIBs, simultaneously reducing the biotoxicity, phytotoxicity and leaching toxicity of spent LIBs under optimal conditions. The results of mechanism analysis demonstrated that functional microorganisms adapted to the leaching system through various strategies, including oxidative stress reduction, DNA damage repair, heavy metal resistance and biofilm formation, maintaining normal physiological activities and the continuous production of biological acid. The biological acid erodes the surface of waste LIBs, causing some Co and a large amount of Li to be released, while also increasing the contact area between GA and Co(III). Therefore, GA is beneficial for reducing insoluble Co(III), forming soluble Co(II). Finally, biological acid can effectively promote Co(II) leaching. Collectively, the results of this study provide valuable insight into the simultaneous enhancement of metal extraction and the mitigation of environmental pollution from spent LIBs.
Subject(s)
Lithium , Recycling , Solubility , Metals , Electric Power SuppliesABSTRACT
The co-combustion synergy of post-phytoremediation biomass may be optimized to cultivate a variety of benefits from reducing dependence on fossil fuels to stabilizing heavy metals in a small quantity of ash. This study characterized the thermo-kinetic parameters, gas-to-ash products, and energetically and environmentally optimal conditions for the co-combustions of aboveground (PG-A) and belowground (PG-B) biomass of Pfaffia glomerata (PG) with pulverized coal (PC). The mono-combustions of PG-A and PG-B involved the decompositions of cellulose and hemicellulose in the range of 162-400 °C and of lignin in the range of 400-600 °C. PG improved the combustion performance of PC, with the blends of 30 % PG-A and 70 % (PAC37) and 10 % PG-B and 90 % PC (PBC19) exhibiting the strongest synergy. Both PG-A and PG-B interacted with PC in the range of 160-440 °C, while PC positively affected PG in the range of 440-600 °C. PC decreased the apparent activation energy (Eα) of PG, with PBC19 having the lowest Eα value (107.85 kJ/mol). The reaction order models (Fn) best elucidated the co-combustion mechanisms of the main stages. Adding >50 % PC reduced the alkali metal content of PG, prevented the slagging and fouling depositions, and mitigated the Cd and Zn leaching toxicity. The functional groups, volatiles, and N- and S-containing gases fell with PAC37 and PBC19, while CO2 emission rose. Energetically and environmentally multiple objectives for the operational conditions were optimized via artificial neural networks. Our study presents controls over the co-circularity and co-combustion of the soil remediation plant and coal.
Subject(s)
Coal Ash , Coal , Coal/analysis , Biomass , Coal Ash/analysis , Soil , GasesABSTRACT
In this study, a suite of Fe-rich biochars derived from Fenton-like treated digestate (Fe-BC) were fabricated under different pyrolysis temperatures (300, 500, and 800 °C), which were firstly utilized as peroxymonosulfate (PMS) activators for promoting digestate dewaterability with wide applicability. Results showed that compared to the Fe-BC300/Fe-BC500 + PMS treatments, Fe-BC800 + PMS process performed superior digestate dewaterability in which specific resistance to filtration reduction and water content reduction improved by > 12.5% and > 130%, respectively, under the optimal conditions. Mechanistic results demonstrated that in Fe-BC800 + PMS system, HO⢠and SO4â¢- oxidation played a pivotal role on promoted digestate dewaterability, while HO⢠and 1O2 oxidation was dominated in Fe-BC300/Fe-BC500 + PMS treatments. Fe-BC800 containing higher Fe and CO contents could efficiently interact with PMS to generate numerous HO⢠and SO4â¢- via iron cycle. These highly reactive oxygen species proficiently reduced the hydrophilic biopolymers, protein molecules, and amino acids in extracellular polymeric substances, leading to remarkable decrease in particle size, hydrophilicity, adhesion, network strength, and bound water of digestate. Consequently, the flowability and dewaterability of digestate could be significantly enhanced. The cost-benefit result indicated the Fe-BC + PMS treatment possessed desirable reusability, applicability, and economic viability. Collectively, the Fe-BC + PMS is a high-performance and eco-friendly technique for digestate dewatering, which opens a new horizon towards a closed-loop of digestate reutilization.
Subject(s)
Iron , Waste Disposal, Fluid , Iron/chemistry , Waste Disposal, Fluid/methods , Sewage/chemistry , Anaerobiosis , Peroxides/chemistry , Oxidation-Reduction , Water/chemistryABSTRACT
S and Cl distribution patterns and their evolution pathways were quantified during the co-combustions of textile dyeing sludge (TDS) and waste biochar (BC). S in the flue gas rose from 10.60% at 700 °C to 45.09% at 1000 °C for the mono-combustion of TDS in the air atmosphere. At 1000 °C, S in the bottom slag and flue gas grew by 2.65% and fell by 2.11%, respectively, for the TDS mono-combustion in the 30%O2/70%CO2 atmosphere. The 40% BC addition increased the S retention in the bottom slag by 30.39% and decreased its release to the flue gas by 34.50% by changing the evolution of CaSO4 and enabling more K to fix S as K2SO4. The decomposition of inorganic Cl was the main source of the Cl-containing gases. The 20%O2/80%CO2 atmosphere (36.29%) and 40% BC addition (27.26%) had higher Cl in the bottom slag than did TDS mono-combusted at 1000 °C (25.60%) by inhibiting the decomposition of organic Cl. Our study provides insights into the co-combustion of TDS and BC and controls on S and Cl for a cleaner production. Future research remains to conducted to verify scale-up experiments.
Subject(s)
Carbon Dioxide , Sewage , Atmosphere , Charcoal , Gases , Temperature , TextilesABSTRACT
Heterogeneous catalytic ozonation (HCO) has been widely applied for the treatment of wastewater. In order to maintain the structural stability and surface catalytic activity of heterogeneous catalysts during the HCO treatment of electroless nickel plating effluent (ENPE), a MnFe2O4-C@Al2O3 catalyst with a core-shell structure was synthesized. MnFe2O4-C@Al2O3 was characterized and applied in the removal of total nickel (TNi) and organic contaminants from actual ENPE, using a coupled system of HCO combined with a magnetic dithiocarbamate chelating resin (MnFe2O4-C@Al2O3/O3-MDCR). Results show that embedding Al2O3 with C and MnFe2O4 significantly increased the TNi removal efficiency (99.3%), enhanced the O3-utilization efficiency and improved the generation of reactive oxygen species (ROS). The reaction rate (k = 0.7641 min-1) and O3-utilization efficiency established for TNi removal (ΔTNi/ΔO3 =0.221) by the MnFe2O4-C@Al2O3/O3-MDCR system, were 220% and 140% higher than the Al2O3/O3-MDCR system, respectively. Catalytic mechanism analysis demonstrated that surface hydroxyl groups, oxygen vacancy, metals, the carbon surface and its functional groups, can all potentially serve as catalytic active sites, with 1O2 and â¢OH considered to the predominant ROS. Overall, these findings verify that the synthesized MnFe2O4-C@Al2O3 catalyst possesses excellent catalytic capabilities and outstanding structural stability, making it suitable for practical application in the treatment of wastewater effluent.
Subject(s)
Ozone , Water Pollutants, Chemical , Catalysis , Nickel , Ozone/chemistry , Reactive Oxygen Species , Wastewater/chemistry , Water Pollutants, Chemical/chemistryABSTRACT
The recovery of metals from spent LiCoO2 batteries (SLBs) is essential to avoid resource wastage and the production of hazardous waste. However, the major challenge in regard to recovering metals from SLBs using traditional bioleaching is the low Co yield. To overcome this issue, a mixed culture of Acidithiobacillus caldus and Sulfobacillus thermosulfidooxidans was designed for use in SLBs leaching in this study. With the assistance of Fe2+ as a reductant, 99% of Co and 100% of Li were leached using the above mixed-culture bioleaching (MCB) process, thus solving the problem of low metal leaching efficiency from SLBs. Analysis of the underlying mechanism revealed that the effective extraction of metals from SLBs by the Fe2+-MCB process relied on Fe2+-releasing electrons to reduce refractory Co(III) to Co(II) that can be easily bioleached. Finally, the hazardous SLBs was transformed into a non-toxic material after treatment utilizing the Fe2+-MCB process. However, effective SLBs leaching was not achieved by the addition of Fe0 to the MCB system. Only 25% Co and 31% Li yields were obtained, as the addition of Fe0 caused acid consumption and bacterial apoptosis. Overall, this study revealed that reductants that cause acid consumption and harm bacteria should be ruled out for use in reductant-assisted bioleaching processes for extracting metals from SLBs.
Subject(s)
Cobalt/isolation & purification , Lithium , Oxides/chemistry , Reducing Agents , Bacteria , Cobalt/chemistry , Electric Power Supplies , Feasibility Studies , Ions , Iron , MetalsABSTRACT
Unwieldy fine sulfide ores are produced during mining; without being appropriately disposed of, they can cause environmental pollution and waste resources. This study investigated the leaching performance of a moderately thermophilic consortia (Leptospirillum ferriphilum + Acidithiobacillus caldus + Sulfobacillus benefaciens) for fine lead-zinc sulfide raw ore. The results showed this microbial community created a low pH, high ORP, and high cell concentration environment for mineral leaching, improving bioleaching efficiency. Under the action of this consortia, the zinc leaching rate reached 96.44 in 8 days, and reached 100% after 12 days. EPS analysis indicated that the consortia could mediate the secretion of more polysaccharides to ensure leaching efficiency. EPS levels and amino acids were the main factors affecting bioleaching. An analysis of mineral surface characteristics showed the consortia effectively leached pyrite and sphalerite from the fine sulfide ore, and prevented the mineral surface forming the jarosite that could hinder bioleaching. This study found that bioleaching reduced the potential environmental toxicity of the minerals, providing an important reference for guiding the bioleaching of unwieldy fine sulfide raw ore.
Subject(s)
Copper , Zinc , Lead , Sulfides , Zinc CompoundsABSTRACT
The torrefaction pretreatment is of great significance to the efficient conversion of biomass residues into bioenergy. In this study, the effects of the three torrefaction temperatures (200, 250, and 300 °C) on the pyrolysis performance and products of coffee grounds (CG) were quantified. The torrefaction treatment increased the initial devolatilization and maximum peak temperatures of the CG pyrolysis. Activation energy of CG250 was lower than that of CG and more conducive to the pyrolysis. Torrefaction altered the distributions of the pyrolytic products and promoted the generation of C=C. Torrefaction changed the composition ratio of the pyrolytic bio-oils although cyanoacetic acid and 2-butene still dominated the bio-oils. The joint optimization pointed to pyrolysis temperature > 600 °C and torrefaction temperature ≤ 270 °C as the optimal conditions. Our experimental results also verified that torrefaction of CG may be more suitable at 200 and 250 °C than 300 °C.
Subject(s)
Heating , Pyrolysis , Biofuels/analysis , Biomass , Coffee , Hot Temperature , Plant Oils , TemperatureABSTRACT
Temperature is considered to be one of the main factors affecting bioleaching, but few studies have assessed the effects of diurnal temperature range (DTR) on the bioleaching process. This study investigates the effects of different bioleaching temperatures (30 and 40 °C) and DTR on the bioleaching of metal sulfide ores by microbial communities. The results showed that DTR had an obvious inhibitory effect on the bioleaching efficiency of the artificial microbial community, although this effect was mainly concentrated in the early and middle stages (0-18 days) of exposure, gradually decreasing until almost disappearing in the late stage (18-24 days). Extracellular polymeric substance (EPS) analysis showed that DTR did not change the composition of the EPS matrix (humic acid-like substances, polysaccharides and protein-like substances), but had a significant effect on the generative behavior of EPS, inhibiting the secretion of EPS during the early and middle stages of the bioleaching process. However, the continual increase in EPS secretion in the bioleaching system gradually reduced the adverse effects of DTR on mineral dissolution. X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Scanning electron microscopy- energy dispersive spectrometry (SEM-EDS) analysis of the bioleached residue showed that DTR had no obvious effect on the mineralogical characteristics of sulfide ore. Therefore, in industrial sulfide ore bioleaching applications, in order to accelerate the artificial microbial community start-up process, temperature control measures should be increased in the bioleaching process to reduce the adverse effects of DTR on mineral dissolution.
Subject(s)
Extracellular Polymeric Substance Matrix , Microbial Consortia , Minerals , Sulfides , TemperatureABSTRACT
Electrokinetic (EK) remediation has been widely studied at laboratory scales. However, field-scale research is far less. In this study, a 14-day EK remediation was carried out, in a field pilot (4 m2) test and a full-scale (200 m2) application for the first time, in a cadmium (Cd) contaminated paddy agricultural field near a mining area. A low voltage of 20 V was applied at both scales; voltage gradient was 20 V m-1 and 4 V m-1 at the pilot and full scales, respectively. Samples were taken from near the anode and cathode, and in the middle of the electric field, in the soil layers 0-10 cm, 10-20 cm, and 40-50 cm. After the EK remediation, a significant portion of the total Cd was removed in all the layers at the pilot scale, by 87%, 72%, and 54% from the top down, but only in the 0-10 cm layer at the full scale by 74%. As for the plant available (exchangeable and soluble) Cd, significant removal (64%) was only observed in the 0-10 cm layer at the pilot scale. The percentage reduction of the electrical conductivity and removal efficiency of the total Cd was higher near the anode than the cathode. The soil pH was elevated near the cathode but stayed below pH 6 due to the sufficient supply of lactic acid. After the EK remediation, the concentration of the total Cd dropped below the hazard threshold, i.e. 0.4 mg (kg dry wt soil)-1 for agricultural paddy fields in China. A total energy of 2 kW·h and 0.6 kW·h was consumed at the pilot and full scales, respectively. This study showed a successful in situ EK remediation of Cd contaminated paddy agricultural soil, especially in the surface layer, with low voltage and energy demand.
ABSTRACT
The stabilization and dewaterability of waste activated sludge (WAS) are essential factors for downstream disposal or reuse. Herein, two types of zero-valent metals, zero-valent iron (Fe0) and zero-valent aluminum (Al0), were compared for their ability to activate peroxymonosulfate (PMS) during the WAS conditioning process, with the effects of PMS activation by these two metals on WAS dewaterability and the potential environmental risks evaluated. Results showed that compared to Al0/PMS treatment, Fe0/PMS treatment achieved superior WAS dewaterability and reduced operational costs. Using PMS combined with Fe0 and Al0 treatments under optimal conditions, the water content (Wc) of dewatered sludge decreased to 55.7 ± 2.7 wt% and 59.4 ± 1.3 wt%, respectively. Meanwhile, application of the Fe0/PMS treatment system reduced the total annual cost by approximately 33.1%, compared to the Al0/PMS treatment. Analysis of the dewatering mechanism demonstrated that in the Fe0/PMS treatment, Fe3+/Fe2+ flocculation played an important role in the enhancement of WAS dewatering, while sulfate radical (SO4â¢-) oxidation was the dominant factor for WAS dewaterability improvement in Al0/PMS treatment. The greater enhancement of WAS dewaterability by Fe0/PMS treatment, was mainly attributed to more efficient reduction of hydrophilic extracellular polymeric substances (EPS) and an increase in surface charge neutralization. Environmental risk evaluation results indicated that Fe0/PMS and Al0/PMS treatments both effectively alleviated the environmental risks of heavy metals and faecal coliforms in dewatered sludge. Overall, this study proposes a novel perspective for the selection of an optimal PMS activator in sludge treatment.
Subject(s)
Sewage , Waste Disposal, Fluid , Iron , Oxidation-Reduction , Peroxides , WaterABSTRACT
In this study, a new method for economical utilization of coffee grounds was developed and tested. The resulting materials were characterized by proximate and elemental analyses, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and N2 adsorption-desorption at 77 K. The experimental data show bio-oil yields reaching 42.3%. The optimal activated carbon was obtained under vacuum pyrolysis self-activation at an operating temperature of 450 °C, an activation temperature of 600 °C, an activation time of 30 min, and an impregnation ratio with phosphoric acid of 150 wt.%. Under these conditions, the yield of activated carbon reached 27.4% with a BET surface area of 1420 m2·g-1, an average pore size of 2.1 nm, a total pore volume of 0.747 cm3·g-1, and a t-Plot micropore volume of 0.428 cm3·g-1. In addition, the surface of activated carbon looked relatively rough, containing mesopores and micropores with large amounts of corrosion pits.
Subject(s)
Charcoal/chemistry , Coffee/chemistry , Plant Oils/chemistry , Polyphenols/chemistry , AdsorptionABSTRACT
In this study, a simple to produce, low-cost and environment-friendly sludge based adsorbent, prepared from municipal dewatered sludge and modified by calcium oxide (CaO), is described. The enhancement effect of CaO modification on the adsorption capacity and mechanical strength of sludge based adsorbents (CaO-SA), and the modification mechanism of CaO on activated sludge are discussed. Also, the Cd(II) adsorption conditions are optimized using surface optimization experiment. The results indicated that CaO had a good effect on improving the adsorption capacity and mechanical strength of the sludge-based adsorbent. The CaO-SA adsorbent showed best performance with respect to the mechanical strength and Cd(II) adsorption capacity when prepared under 5% CaO dosage and 60 °C drying temperature. CaO modification can increase the specific surface area and calcium ion content of the sludge-based adsorbent and remove the proton of the carboxylic acid in the sludge. The Box-Behnken experimental design results revealed that the importance of operating conditions for CaO-SA adsorption of Cd(II) can be arranged in the order of adsorption time > dosage> pH> temperature. The results also indicated that the interactions between adsorption time and CaO-SA dosage, adsorption time and pH, adsorption time and temperature are all important factors affecting the Cd(II) adsorption. The optimal conditions (adsorption time of 90 min, CaO-SA dosage of 1 g/L, pH of 5 and adsorption temperature of 40 °C) for CaO-SA to adsorb Cd(II) were obtained by surface optimization, at which the Cd(II) adsorption rate could reach a value of 99.74%.
Subject(s)
Cadmium/chemistry , Water Pollutants, Chemical/chemistry , Adsorption , Cadmium/analysis , Calcium Compounds/chemistry , Hydrogen-Ion Concentration , Kinetics , Models, Chemical , Oxides/chemistry , Temperature , Waste Management , Water Pollutants, Chemical/analysisABSTRACT
The production of large volumes of waste flotation tailings results in environmental pollution and presents a major ecological and environmental risk. This study investigates bioleaching of waste flotation tailings using Acidithiobacillus ferrooxidans. The experiments were performed with 5.00% solid concentration, pH 2.0 with 100 mL medium for 25 d in the lab. The pH, OPR, metal concentration, dissolved organic matter (DOM) in leachate and extracellular polymeric substances (EPS) were recorded. Bioleaching tailing materials were finally characterized. Results showed that microorganisms, acclimating with mine tailings, effectively accelerated the bioleaching process, achieving maximum Zn and Fe extraction efficiencies of 95.45% and 83.98%, respectively, after 25 days. Compared with raw mine tailings, bioleaching could reduce 96.36% and 95.84% leachable Zn and Pb, and Pb presented a low risk (4.13%), while Zn, Cu, and Cr posed no risk (0.34%, 0.64%, and 0%). Toxicity and environmental risk analysis revealed bioleaching process significantly reduced the environmental risk associated with mine tailings. EPS analysis indicated that the loosely-bound EPS (LB-EPS) and tightly-bound EPS (TB-EPS) fractions contained different organic substances, which played different roles in the bioleaching process. Pearson correlation analysis revealed that EPS was highly correlated with bioleaching behavior (p < 0.05), and EPS was the main factor affecting the bioleaching process, promoting bioleaching in the LB-EPS and TB-EPS fractions.