Rich oxygen vacancy and amorphous/crystalline ruthenium-doped CoCu -layered double hydroxide electrocatalysts for enhanced oxygen evolution reactions.

Reinforcing the development of efficient and robust electrocatalysts is pivotal in addressing the challenges associated with oxygen evolution reactions (OER) in water splitting technology. Here, an amorphous/crystalline low-ruthenium-doped bimetallic layered double hydroxide (LDH) electrocatalyst (a/c-CoCu + Rux-LDH/NF) with massive oxygen vacancy on nickel foam was fabricated via ion-exchange and chemical etching, facilitating efficient OER. Among the various catalyst materials tested, the a/c-CoCu + Ru10-LDH/NF exhibits remarkable performance in the OER when employed in an alkaline electrolyte containing 1 M KOH. Achieving a minimal overpotential at 10 mA cm-2 of 214 mV, exhibiting a low Tafel slope value of 64.3 mV dec-1 and exceptional durability lasting for over 100 h. Theoretical calculations demonstrate that the electron structure and d-band center of CoCu-LDH can be effectively regulated through the utilization of a strategy possessing abundant oxygen vacancies and a Ru-doped crystalline/amorphous heterostructure. It will lead to optimized adsorption free energy of reactants and reduced energy barriers for OER. The construction strategy proposed in this paper for catalysts with amorphous/crystalline heterointerfaces offer a novel opportunity to achieve highly efficient OER.

Two-point immobilization of M3 muscarinic receptor: a method for recognizing receptor antagonists in natural products.

In the investigation of active ingredients from natural products, current technologies relying on drug-target affinity recognition analysis face significant challenges. This is primarily due to their limited specificity and inability to provide downstream pharmacodynamic information, such as agonistic or antagonistic activity. In this study, a two-point method was developed by immobilizing M3 acetylcholine receptor (M3R) through the combination of the conformation-specific peptide BJ-PRO-13a and the HaloTag trap system. We systematically assessed the specificity of the immobilized M3R using known M3R antagonists (pirenzepine and atropine) and agonists (cevimeline and pilocarpine). By frontal analysis and nonlinear chromatography, the performance of immobilized M3R was evaluated in terms of binding kinetics and thermodynamics of four drugs to the immobilized M3R. Additionally, we successfully identified two M3R antagonists within an extract from Daturae Flos (DF), specifically hyoscyamine and scopolamine. Our findings demonstrate that this immobilization method effectively captures receptor-ligand binding interactions and can discern receptor agonists from antagonists. This innovation enhances the efficiency of receptor chromatography to determine binding-affinity in the development of new drugs, offering promise for the screening and characterization of active compounds, particularly within complex natural products.

Decoration of Ag nanoparticle on MXene sheets for SERS studies.

MXene sheets with the unique electrical and optical properties show the excellent potential for surface-enhanced Raman spectroscopy (SERS) applications. In this study, we chose Ti3C2Tx, a type of MXene, to decorate silver nanoparticles (Ag NPs) on the ultrathin two-dimensional (2D) MXene sheets. The designed Ag-MXene substrates with SERS activity showed high sensitivity, high stability, and reproducibility. The SERS signal was enhanced by the synergistic contribution of both charge-transfer (CT) and surface plasmon resonance (SPR) involving the Ag NPs and the MXene sheets. Due to the strong interaction between the probe molecules and Ag NPs which provided the nanoscale gap, the substrate exhibited remarkable SERS performance. A novel experimental strategy was developed to facilitate the controlled synthesis of noble metal NPs and MXene sheets and provide insights for further improving the practical applications of these materials in SERS detection.

Screening and analysis of key genes in the biological behavior of bone mesenchymal stem cells seeded on gradient nanostructured titanium compared with native pure Ti.

Titanium (Ti) and Ti-based alloy materials are ideal brackets that restore bone defect, and the mechanism of related genes inducing bone mesenchymal stem cells (BMSCs) to osteogenic differentiation is currently a hot research topic. In order to screen key genes of BMSCs during the osteogenic expression process, we acquired data sets (GSE37237 and GSE84500) which were in the database Gene Expression Omnibus (GEO). Investigations on differentially expressed genes (DEGs) and their enrichment of functions were conducted. We constructed relative protein-protein interaction (PPI) network by using Search Tool for the Retrieval of Interacting Genes (STRING) and visualized the expression of DEGs with Cytoscape. A total of 279 DEGs were discerned, which could be divided into 177 down regulated genes and 102 up regulated genes. In addition, the DEGs' enrichment and pathways included regulation of actin cytoskeleton, inflammatory mediator regulation of transient receptor potential (TRP) channels, peroxisome proliferator-activated receptors (PPAR) pathway, cell cycle, Rheumatoid arthritis, mitogen-activated protein kinases (MAPK) signaling pathway and Ras signaling pathway ect. It showed that 10 notable up regulated genes were mainly in AMP-activated protein kinase (AMPK) pathway. Then we used a technology named surface mechanical attrition treatment (SMAT) to prepare gradient nanostructured (GNS) surface Ti and seeded well-growing BMSCs on the surface of SMAT Ti and native pure Ti. Cell Counting Kits-8 (CCK-8), apoptosis experiment, immunofluorescence technology and staining experiments for alka-line phosphatase (ALP) and alizarin red staining (ARS) were used to research the proliferation, adhesion and differentiation ability of BMSCs seeded on SMAT Ti compared with native pure Ti. We used quantitative real-time PCR (qRT-PCR) technology so as to verify the expression of the most significant 5 genes. In summary, these results indicated novel point of views into candidate genes and potential mechanism for the further study of BMSCs' behaviors seeded on SMAT Ti.

Simultaneous Prediction, Determination, and Extraction of Four Polycyclic Aromatic Hydrocarbons in the Environment Using a UCON-NaH2PO4 Aqueous Two-Phase Extraction System Combined with High-Performance Liquid Chromatography-Ultraviolet Detection.

In this paper, a new aqueous two-phase extraction system(ATPES) consisting of UCON (poly(ethylene glycol-ran-propylene glycol) monobutyl ether)-NaH2PO4 was established, and four trace polycyclic aromatic hydrocarbons (PAHs: fluorene, anthracene, pyrene and phenanthrene) in water and soil were analyzed by high-performance liquid chromatography (HPLC)-ultraviolet detection. In the multi-factor experiment, the central composite design (CCD) was used to determine the optimum technological conditions. The final optimal conditions were as follows: the concentration of UCON was 0.45 g·mL-1, the concentration of NaH2PO4 was 3.5 mol·L-1, and the temperature was 30 °C. The recovery of the four targets was 98.91-99.84% with a relative standard deviation of 0.3-2.1%. Then UCON recycling and cyclic tests were designed in the experiment, and the results showed that the recovery of PAHs gradually increased in the three extractions because of the remaining PAHs in the salt phase of last extraction. The recovery of PAHs in the UCON recycling test was less than that in the extraction test due to the wastage of UCON. In addition, a two-phase aqueous extraction model was established based on the random forest (RF) model. The results obtained were compared with the experimental data, and the root mean square error (RMSE) was 0.0371-0.0514 and the correlation coefficient R2 was 96.20-98.53%, proving that the model is robust and reliable.

Bandgap Engineering of an Aryl-Fused Tetrathianaphthalene for Visible-Blind Organic Field-Effect Transistors.

Stability problem of organic semiconductors (OSCs) because of photoabsorption has become a major barrier to large scale applications in organic field-effect transistors (OFETs). It is imperative to design OSCs which are insensitive to visible and near-infrared (VNIR) light to obtain both environmental and operational stability. Herein, taking a 2,3,8,9-tetramethoxy [1,4]benzodithiino[2,3-b][1,4]benzodithiine (TTN2) as an example, we show that controlling molecular configuration is an effective strategy to tune the bandgaps of OSCs for visible-blind OFETs. TTN2 adopts an armchair-like configuration, which is different from the prevailing planar structure of common OSCs. Because of the large bandgap, TTN2 exhibits no photoabsorption in the VNIR region and OFETs based on TTN2 show high environmental stability. The devices worked well after being stored in ambient air, (i.e. in the presence of oxygen and water) and light for over two years. Moreover, the OFETs show no observable response to light irradiation from 405-1,020 nm, which is also favorable for high operational stability.

Fabrication and Characterization of Viton@FOX-7@Al Spherical Composite with Improved Thermal Decomposition Property and Safety Performance.

To achieve a uniform distribution of the components and a better performance of aluminized composite explosives, Viton (dipolymers of hexafluoropropylene and vinylidene fluoride) @ FOX-7 (1,1-diamino-2,2-dinitroethylene) @Al microspheres and FOX-7/Viton@Al were synthesized by spray-drying strategy contrastively. Viton@FOX-7@Al owned porous and loose morphology and good sphericity with a retained crystal phase of FOX-7 and aluminum. The 23.56% fluorine content on Viton@FOX-7@Al surface indicated that Viton was completely coated on the surface of the particles. Nanosized aluminum (nAl) in Viton@FOX-7@Al had a certain catalytic activity on the thermal decomposition process of FOX-7 resulting in a depressed exothermic peak temperature and reduced apparent activation energy relative to nAl in FOX-7/Viton@Al. Because of the specific structure and the synergies between each individual component, Viton@FOX-7@Al showed reduced impact sensitivity and friction sensitivity than those of FOX-7/Viton@Al. In brief, Viton@FOX-7@Al with multilevel coating structure possessed comparatively low thermal decomposition energy requirement and improved safety performance.

Effects of reduced seawater pH on nematode community composition and diversity in sandy sediments.

The present study investigated the potential effects of seawater acidification on the taxonomic structure and diversity of nematode communities using a microcosm experiment. Nematode samples for the microcosm experiment were collected from the low tidal zone of two sandy beaches with different sediment compositions (medium sand vs. very fine sand) in Qingdao (China). In the microcosm, nematode communities were exposed to nine experimental treatments comprising two pH levels for 56 days: 8.0 (ambient control) and 7.3. Communities were exposed for 0, 7, 14, 28, or 56 days. Results showed that the most distinguishable differences in nematode community structure and diversity indices were caused by sediment type. Reduced pH changed the taxonomic structure of nematode communities in medium sand sediments. An increase in species with higher tolerance to lowered pH occurred as a response and resulted in increased diversity in medium sand sediments. Nematode communities in finer sediments appeared less sensitive to reduced pH.

A "Phase Separation" Molecular Design Strategy Towards Large-Area 2D Molecular Crystals.

2D molecular crystals (2DMCs) have attracted considerable attention because of their unique optoelectronic properties and potential applications. Taking advantage of the solution processability of organic semiconductors, solution self-assembly is considered an effective way to grow large-area 2DMCs. However, this route is largely blocked because a precise molecular design towards 2DMCs is missing and little is known about the relationship between 2D solution self-assembly and molecular structure. A "phase separation" molecular design strategy towards 2DMCs is proposed and layer-by-layer growth of millimeter-sized monolayer or few-layer 2DMCs is realized. High-performance organic phototransistors are constructed based on the 2DMCs with unprecedented photosensitivity (2.58 × 107 ), high responsivity (1.91 × 104 A W-1 ), and high detectivity (4.93 × 1015 Jones). This "phase separation" molecular design strategy provides a guide for the design and synthesis of novel organic semiconductors that self-assemble into large-area 2DMCs for advanced organic (opto)electronics.

A bioinformatics investigation into the pharmacological mechanisms of the effect of Fufang Danshen on pain based on methodologies of network pharmacology.

Fufang Danshen (FFDS), a Chinese medicine formula widely used in the clinic, has proven therapeutic effects on pain relief. However, the mechanisms of these effects have not been elucidated. Here, we performed a systematic analysis to discover the mechanisms of FFDS in attenuating pain to gain a better understanding of FFDS in the treatment of other diseases accompanied by pain. Relevance analysis showed that Salvia miltiorrhizae was the best studied herb in FFDS. Most compounds in FFDS have good bioavailability, and we collected 223 targets for 35 compounds in FFDS. These targets were significantly enriched in many pathways related to pain and can be classified as signal transduction, endocrine system, nervous system and lipid metabolism. We compared Salvia miltiorrhizae and Panax notoginseng and found that they can significantly affect different pathways. Moreover, ten pain disease proteins and 45 therapeutic targets can be directly targeted by FFDS. All 45 therapeutic targets have direct or indirect connections with pain disease proteins. Forty-six pain disease proteins can be indirectly affected by FFDS, especially through heat shock cognate 71 kDa protein (HSPA8) and transcription factor AP-1 (JUN). A total of 109 targets of FFDS were identified as significant targets.

Detection and Identification of Estrogen Based on Surface-Enhanced Resonance Raman Scattering (SERRS).

Many studies have shown that it is important to consider the harmful effects of phenolic hormones on the human body. Traditional UV detection has many limitations, so there is a need to develop new detection methods. We demonstrated a simple and rapid surface-enhanced resonance Raman scattering (SERRS) based detection method of trace amounts of phenolic estrogen. As a result of the coupling reaction, there is the formation of strong SERRS activity of azo compound. Therefore, the detection limits are as low as 0.2 × 10-4 for estrone (E1), estriol (E3), and bisphenol A (BPA). This method is universal because each SERRS fingerprint of the azo dyes a specific hormone. The use of this method is applicable for the testing of phenolic hormones through coupling reactions, and the investigation of other phenolic molecules. Therefore, this new method can be used for efficient detection.

Self-Assembled Ag-Cu2O Nanocomposite Films at Air-Liquid Interfaces for Surface-Enhanced Raman Scattering and Electrochemical Detection of H2O2.

We employ a facile and novel route to synthesize multifunctional Ag-Cu2O nanocomposite films through the self-assembly of nanoparticles at an air-liquid interface. In the ethanol-water phase, AgNO3 and Cu(NO3)2 were reduced to Ag-Cu2O nanoparticles by NaBH4 in the presence of cinnamic acid. The Ag-Cu2O nanoparticles were immediately trapped at the air-liquid interface to form two-dimensional nanocomposite films after the reduction reaction was finished. The morphology of the nanocomposite films could be controlled by the systematic regulation of experimental parameters. It was found that the prepared nanocomposite films serving as the substrates exhibited strong surface-enhanced Raman scattering (SERS) activity. 4-aminothiophenol (4-ATP) molecules were used as the test probes to examine the SERS sensitivity of the nanocomposite films. Moreover, the nanocomposite films synthesized by our method showed enhanced electrocatalytic activity towards hydrogen peroxide (H2O2) and therefore could be utilized to fabricate a non-enzymatic electrochemical H2O2 sensor.

Enhanced Catalytic Reduction of 4-Nitrophenol Driven by Fe3O4-Au Magnetic Nanocomposite Interface Engineering: From Facile Preparation to Recyclable Application.

In this work, we report the enhanced catalytic reduction of 4-nitrophenol driven by Fe3O4-Au magnetic nanocomposite interface engineering. A facile solvothermal method is employed for Fe3O4 hollow microspheres and Fe3O4-Au magnetic nanocomposite synthesis via a seed deposition process. Complementary structural, chemical composition and valence state studies validate that the as-obtained samples are formed in a pure magnetite phase. A series of characterizations including conventional scanning/transmission electron microscopy (SEM/TEM), Mössbauer spectroscopy, magnetic testing and elemental mapping is conducted to unveil the structural and physical characteristics of the developed Fe3O4-Au magnetic nanocomposites. By adjusting the quantity of Au seeds coating on the polyethyleneimine-dithiocarbamates (PEI-DTC)-modified surfaces of Fe3O4 hollow microspheres, the correlation between the amount of Au seeds and the catalytic ability of Fe3O4-Au magnetic nanocomposites for 4-nitrophenol (4-NP) is investigated systematically. Importantly, bearing remarkable recyclable features, our developed Fe3O4-Au magnetic nanocomposites can be readily separated with a magnet. Such Fe3O4-Au magnetic nanocomposites shine the light on highly efficient catalysts for 4-NP reduction at the mass production level.

Highly Efficient, Low-Cost, and Magnetically Recoverable FePt⁻Ag Nanocatalysts: Towards Green Reduction of Organic Dyes.

Nowadays, synthetic organic dyes and pigments discharged from numerous industries are causing unprecedentedly severe water environmental pollution, and conventional water treatment processes are hindered due to the corresponding sophisticated aromatic structures, hydrophilic nature, and high stability against light, temperature, etc. Herein, we report an efficient fabrication strategy to develop a new type of highly efficient, low-cost, and magnetically recoverable nanocatalyst, i.e., FePt⁻Ag nanocomposites, for the reduction of methyl orange (MO) and rhodamine B (RhB), by a facile seed deposition process. X-ray diffraction results elaborate that the as-synthesized FePt⁻Ag nanocomposites are pure disordered face-centered cubic phase. Transmission electron microscopy studies demonstrate that the amount of Ag seeds deposited onto the surfaces of FePt nanocrystals increases when increasing the additive amount of silver colloids. The linear correlation of the MO and RhB concentration versus reaction time catalyzed by FePt⁻Ag nanocatalysts is in line with pseudo-first-order kinetics. The reduction rate constants of MO and RhB increase with the increase of the amount of Ag seeds. FePt⁻Ag nanocomposites show good separation ability and reusability, and could be repeatedly applied for nearly complete reduction of MO and RhB for at least six successive cycles. Such cost-effective and recyclable nanocatalysts provide a new material family for use in environmental protection applications.

[Study on quality control of Holotrichia diomphalia larvae by TLC and HPLC].

The TLC method was established for identification of Holotricha diomphalia larvae and the HPLC method was used to determine the content of inosine and guanosine in H. diomphalia larvae. The HPLC analysis was performed on a Waters HSS T3（4.6 mm×250 mm, 5 µm） column of with mobile phase consisting of acetonitrile (A) and 0.08% trifluoroacetic acid (B) in gradient elution. The detection wavelength was 260 nm. The flow rate was 1.0 mL·min⁻¹. The column temperature was 30 °C. As a result, TLC identification method had a good reproducibility and highly specificity. The linear equations of inosine and guanosine were in good linear range (r>0.999 8). The average recovery of inosine and guanosine was 96.53% (RSD=1.6%), 99.71% (RSD=2.7%). The method is simple, accurate and reproducible, which can provide a basis for quality standard improvement H. diomphalia larvae.

SERS study of surface plasmon resonance induced carrier movement in Au@Cu2O core-shell nanoparticles.

A plasmon induced carrier movement enhanced mechanism of surface-enhanced Raman scattering (SERS) was investigated using a charge-transfer (CT) enhancement mechanism. Here, we designed a strategy to study SERS in Au@Cu2O nanoshell nanoparticles with different shell thicknesses. Among the plasmonically coupled nanostructures, Au spheres with Cu2O shells have been of special interest due to their ultrastrong electromagnetic fields and controllable carrier transfer properties, which are useful for SERS. Au@Cu2O nanoshell nanoparticles (NPs) with shell thicknesses of 48-56nm are synthesized that exhibit high SERS activity. This high activity originates from plasmonic-induced carrier transfer from Au@Cu2O to 4-mercaptobenzoic acid (MBA). The CT transition from the valence band (VB) of Cu2O to the second excited π-π* transition of MBA, and is of b2 electronic symmetry, which was enhanced significantly. The Herzberg-Teller selection rules were employed to predict the observed enhanced b2 symmetry modes. The system constructed in this study combines the long-range electromagnetic effect of Au NPs, localized surface plasmon resonance (LSPR) of the Au@Cu2O nanoshell, and the CT contribution to assist in understanding the SERS mechanism based on LSPR-induced carrier movement in metal/semiconductor nanocomposites.

Trichalcogenasumanene ortho-Quinones: Synthesis, Properties, and Transformation into Various Heteropolycycles.

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a,b at peripheral butoxy groups afforded trichalcogenasumanene ortho-quinones 2 a,b. Compounds 2 a,b are distinct from 1 a,b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a,b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a-6 a, planar π-systems 3 b-6 b, and highly twisted [7-6-6]-fused systems 7 a,b. These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm2 V-1 s-1 , 6 a displayed red emission in both solution and the solid state, and 7 a,b formed tight stacks of the curved π-surface.

Dissecting Trichalcogenasumanenes: π-Bowl to Planar, Invertible Curvature, and Chiral Polycycles.

The buckybowl trichalcogenasumanenes show cleavage of flanking benzene ring upon oxidation, which leads their dissection by fusing various amidine moieties onto peripheral region. By gradually increasing the ring size of amidine from five- to six- and seven-membered, the molecule engineering results in the [7-5-6]-, [7-6-6]-, and [7-7-6]-fused polycycles. Three systems are distinct in the molecular geometries, packing motifs, and optoelectronic properties. The [7-5-6]-fused case adopts the flat backbone, displays strong emission with the fluorescence quantum yield up to 52.3 %, and undergoes a two-photon absorption process. The [7-6-6]-fused one is of a curvature with molecular geometry inversion, forms a tight stack of curved π-system, shows broad absorption extended to 700 nm, and exhibits the p-type semiconducting behavior with hole mobility of 4.4×10-3  cm2 V-1 s-1 . The [7-7-6]-fused one possesses the highly twisted skeleton to show stable chirality, and exhibits red emission in both solution and solid state. The surgery on trichalcogenasumanene is a promising approach to create polycycles with diverse functionalities.

Tritellurasumanene: ultrasound assisted one-pot synthesis and extended valence adducts with bromine.

Tritellurasumanene is synthesized from a triphenylene skeleton via ultrasound assisted one-pot reaction. This compound adopts a flat conjugated system and displays TeTe (3.83 Å) interactions in the solid state. Its optical properties and chemical reactivity are quite different from those of its trithia- and triselena-analogues.

Investigation of ketoprofen binding to human serum albumin by spectral methods.

The binding of ketoprofen with human serum albumin (HSA) was studied by fluorescence and absorption spectroscopic methods. Quenching of fluorescence of HSA was found to be a static quenching process. At 288.15, 298.15, 308.15 and 318.15 K, the binding constants and binding sites were obtained. The effects of Cu2+, Al3+, Ca2+, Pb2+ and K+ on the binding at 288.15 K were also studied. The thermodynamic parameters, ΔH, ΔG and ΔS were got and the main sort of acting force between ketoprofen and HSA was studied. Based on the Förster's theory of non-radiation energy transfer, the binding average distance, r, between the acceptor (ketoprofen) and the donor (HSA) was calculated.